Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Analytical Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

WE-EF-303-09: Proton-Acoustic Range Verification in Proton Therapy

Purpose: We investigated proton-acoustic signals detection for range verification with current ultrasound instruments in typical clinical scenarios. Using simulations that included a realistic noise model, we determined the theoretical minimum dose required to generate detectable proton-acoustic signals. Methods: An analytical model was used to calculate the dose distributions and local pressure rise (per proton) for beams of different energy (100 and 160 MeV) and spot widths (1, 5, and 10 mm) in a water phantom. The acoustic waves propagating from the Bragg peak were modeled by the general 3D pressure wave equation and convolved with Gaussian kernels to simulate various proton pulse widths (0.1 – 10 ms). A realistic PZT ultrasound transducer (5 cm diameter) was simulated with a Butterworth band-pass filter, and ii) randomly generated noise based on a model of thermal noise in the transducer. The signal-to-noise ratio was calculated, determining the minimum number of protons and dose required per pulse. The maximum spatial resolution was also estimated from the signal spectrum. Results: The calculated noise in the transducer was 12–28 mPa, depending on the transducer center frequency (70–380 kHz). The minimum number of protons were on the order of 0.6–6 million per pulse, leading to 3–110 mGy dose per pulse at the Bragg peak, depending on the spot size. The acoustic signal consisted of lower frequencies for wider pulses, leading to lower noise levels, but also worse spatial resolution. The resolution was 1-mm for a 0.1-µs pulse width, but increased to 5-mm for a 10-µs pulse width. Conclusion: We have established minimum dose detection limits for proton-acoustic range validation. These limits correspond to a best case scenario with a large detector with no losses and only detector thermal noise. Feasible proton-acoustic range detection will require at least 10{sup 7} protons per pulse and pulse widths ≤ 1-µs.

60 APPLIED LIFE SCIENCES↗

BONCAT-Live for isolation and cultivation of active environmental bacteria

In diverse environments, microbes drive a myriad of processes, from geochemical and nutrient cycling to interspecies interactions, including associations with plants and animals. Their physiological state is dynamic and impacted by abiotic and biotic conditions, responding to environmental fluctuations by changes in cellular metabolism, according to their genetic potential. Molecular, cellular, and genomic approaches can identify and measure microbial responses and adaptation to environmental changes in native communities. However, isolating individual microbial cells that respond to specific changes for cultivation has been difficult. To address this, we implemented a novel bacterial isolation approach (BONCAT-Live) by integrating bio-orthogonal non-canonical amino acid tagging (BONCAT) in diverse native communities, with isolation and cultivation of cells responding to specific stimuli, at different time scales. In frozen Arctic permafrost samples, we identified and isolated dormant bacteria that become active after thawing under native or nutrient-enriched conditions. From the Populus tree rhizosphere, we isolated strains that thrive under high concentrations of root exudates that act as defense compounds and nutrients. In the human microbiome, we identified and isolated bacteria that rapidly proliferated when exposed to metabolites provided by the host or other co-occurring microbes. Further characterization of isolated bacterial strains will provide opportunities for in-depth determination of how these microbes adapt to changes in their environments, individually and as part of model communities.

Analytical Methods↗

SARS-CoV-2 wastewater variant surveillance: pandemic response leveraging FDA’s GenomeTrakr network

ABSTRACT Wastewater surveillance has emerged as a crucial public health tool for population-level pathogen surveillance. Supported by funding from the American Rescue Plan Act of 2021, the FDA‘s genomic epidemiology program, GenomeTrakr, was leveraged to sequence SARS-CoV-2 from wastewater sites across the United States. This initiative required the evaluation, optimization, development, and publication of new methods and analytical tools spanning sample collection through variant analyses. Version-controlled protocols for each step of the process were developed and published on protocols.io. A custom data analysis tool and a publicly accessible dashboard were built to facilitate real-time visualization of the collected data, focusing on the relative abundance of SARS-CoV-2 variants and sub-lineages across different samples and sites throughout the project. From September 2021 through June 2023, a total of 3,389 wastewater samples were collected, with 2,517 undergoing sequencing and submission to NCBI under the umbrella BioProject,PRJNA757291. Sequence data were released with explicit quality control (QC) tags on all sequence records, communicating our confidence in the quality of data. Variant analysis revealed wide circulation of Delta in the fall of 2021 and captured the sweep of Omicron and subsequent diversification of this lineage through the end of the sampling period. This project successfully achieved two important goals for the FDA’s GenomeTrakr program: first, contributing timely genomic data for the SARS-CoV-2 pandemic response, and second, establishing both capacity and best practices for culture-independent, population-level environmental surveillance for other pathogens of interest to the FDA. IMPORTANCE This paper serves two primary objectives. First, it summarizes the genomic and contextual data collected during a Covid-19 pandemic response project, which utilized the FDA’s laboratory network, traditionally employed for sequencing foodborne pathogens, for sequencing SARS-CoV-2 from wastewater samples. Second, it outlines best practices for gathering and organizing population-level next generation sequencing (NGS) data collected for culture-free, surveillance of pathogens sourced from environmental samples.

Microbiology↗

Excitation of Surface Waves during by an Inhomogeneous Electromagnetic Wave Incident on the Plasma Boundary

We have studied the excitation of surface plasma waves during the propagation of a cylindrical electromagnetic wave in a layered plasma–dielectric medium. The dielectric—vacuum—plasma and vacuum–plasma–plasma layers have been considered. It is shown that no surface waves are excited by the cylindrical electromagnetic wave at the plasma–dielectric boundary (like in the case of a plane wave). A surface wave in a layered medium is excited in a quite narrow range of frequencies and angles of propagation. We have calculated the structures of the electromagnetic field and the electromagnetic energy flux and determined the integral reflection and transmission coefficients using both numerical an analytic asymptotic methods. It is shown that the contribution of the field from the lateral wave is negligibly small in all cases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopy of the {sub {Lambda}}{sup 7}He nucleus in a three-cluster model

The {sub {Lambda}}{sup 7}He hypernucleus is considered within the {sub {Lambda}}{sup 5}He + n + n cluster model. The hyperon-nucleon interaction is described by a one-boson-exchange potential that is constructed on the basis of the NSC97f model. Phenomenological potentials are used to describe the {alpha}{Lambda} and {alpha}N interactions. For the {sub {Lambda}}{sup 5}Hen interaction, use is made of the folding-model potential. The calculations of the hyperon binding energy in the ground state of the {sub {Lambda}}{sup 7}He hypernucleus on the basis of Faddeev equations in configuration space yield a result (5.35 MeV) that agrees well with preliminary experimental data (5.4 MeV). The problem of calculating the hyperon binding energy within the three-body approach is discussed. In calculating the energy spectrum of {sub {Lambda}}{sup 7}He, use is made of a version of the method of analytic continuation in the coupling constant. Low-lying excited states of this nucleus can be classified as an analog of the corresponding states of the {sup 6}He nucleus with allowance for the clustering of the {sub {Lambda}}{sup 5}He+n+n system in the {sup 6}He(J{sup {pi}})+{Lambda}(s) form.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An {alpha}-cluster model for {sub {Lambda}}{sup 9}Be spectroscopy

An {alpha}-cluster model is applied to study low-lying spectrum of the {sub {Lambda}}{sup 9}Be hypernucleus. The three-body {alpha}{alpha}{Lambda} problem is numerically solved by the Faddeev equations in configuration space using phenomenological pair potentials. We found a set of the potentials that reproduces experimental data for the ground state (1/2{sup +}) binding energy and excitation energy of the 5/2{sup +} and 3/2{sup +} states, simultaneously. This set includes the Ali-Bodmer potential of the version 'e' for {alpha}{alpha} and modified Tang-Herndon potential for {alpha}{Lambda} interactions. The spin-orbit {alpha}{Lambda} interaction is given by modified Scheerbaum potential. Low-lying energy levels are evaluated applying a variant of the analytical continuation method in the coupling constant. It is shown that the spectral properties of {sub {Lambda}}{sup 9}Be can be classified as an analog of {sup 9}Be spectrum with the exception of several 'genuine hypernuclear states'. This agrees qualitatively with previous studies. The results are compared with experimental data and new interpretation of the spectral structure is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of Electron Collisions on the Breaking of Plasma Oscillations

The influence of electron collisions on the breaking of plane nonlinear plasma oscillations is analyzed. Numerical calculations by the particle method and analytical consideration in the weakly nonlinear regime show that the breaking time of plasma oscillations increases with increasing electron collision frequency. The threshold value of the electron collision frequency above which no singularity in the electron density arises is found. In this case, the density maximum formed outside the symmetry plane of oscillations, the growth of which in the weakly collisional regime leads to the breaking effect, begins to decrease after some growth because of oscillation damping.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fit Fly: A Case Study of Interconnect Innovation through Parallel Simulation

To meet the demand for exascale-level performance from high-performance computing (HPC) interconnects, many system architects are turning to simulation results for accurate and reliable predictions of the performance of prospective technologies. Testing full-scale networks with a variety of benchmarking tools, including synthetic workloads and application traces, can give crucial insight into what ideas are most promising without needing to physically construct a test network. While flexible, however, this approach is extremely compute time intensive. We address this time complexity challenge through the use of large-scale, optimistic parallel simulation that ultimately leads to faster HPC network architecture innovations. In this paper we demonstrate this innovation capability through a real-world network design case study. Specifically, we have simulated and compared four extreme-scale interconnects: Dragonfly, Megafly, Slim Fly, and a new dual-rail-dual-plane variation of the Slim Fly network topology. We present this new variant of Slim Fly, dubbed Fit Fly, to show how interconnect innovation and evaluation-beyond what is possible through analytic methods-can be achieved through parallel simulation. We validate and compare the model with various network designs using the CODES interconnect simulation framework. By running large-scale simulations in a parallel environment, we are able to quickly generate reliable performance results that can help network designers break ground on the next generation of high-performance network designs.

High Performance Computing↗

Expanded Validation of Uranium Systems with the KENO Monte Carlo Codes and SCALE 6.2.4

The development of accident-tolerant fuel and advanced reactors fueled with high-assay low-enriched uranium has created an increased focus on systems with uranium enrichments between 5 and 20 wt % 235 U. SCALE criticality safety validation reports generated at Oak Ridge National Laboratory contain very few benchmark experiments in this range. The work presented herein is an initial investigation of expanded validation of the entire range of enrichments for uranium-fueled systems, including consideration of over 300 newly developed KENO models. The vast majority of the new models are between 4.4 wt % and 37.5 wt % enrichment and include a variety of thermal, intermediate, and mixed neutron spectra. This work finds no strong evidence of an enrichment-dependent bias, but there are indications of a spectrum-dependent bias. There are, however, only a limited number of independent experiments included at this time to distinguish intermediate enrichment effects from intermediate spectrum effects. Further work in this area is ongoing for intermediate enrichment systems. In the long run, the addition of these models to the Verified, Archived Library and Inputs and Data is planned, as funding and staff availability allow.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Description and Use of SCALE Sampler Parametric Capability for Engineering Analysis and Optimization

The Sampler sequence was introduced into the SCALE nuclear modeling and simulation suite in SCALE 6.2 to perform uncertainty quantification via random sampling of nuclear data, material number densities, and dimensions. Sampler was expanded with the introduction of a parametric capability in SCALE 6.2.2. This paper discusses input for the Sampler parametric sequence and presents two case studies of analyses performed using the sequence. These case studies include preconceptual design of a package for transporting high assay low-enriched uranium (HALEU) oxide and scoping calculations to support subcritical limit development for a future update of the ANSI/ANS-8.1 (ANS-8.1) standard. The parametric capability within Sampler provides many benefits to analysts. For instance, parametric sweeps are frequently used to identify optimum parameter values as part of safety analysis or system design, but such sweeps can require substantial engineering time or may rely on custom-written scripts or scripts such as Write One, Run Many (or WORM) developed outside of any software quality assurance program. With the parametric capabilities in Sampler, however, a large number of inputs can be generated automatically without recourse to scripting by individual analysts. The parametric capability can also be used in lieu of the CSAS5S search sequence to identify optimum parameters more simply with straightforward inputs and outputs. Sampler can also be used to calculate input parameters from engineering specifications. For example, diameters can be converted to radii, or masses can be used to calculate number densities. Overall, the Sampler parametric capability provides a robust feature within SCALE, eliminating the need for user-developed scripting.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Initial Efforts Organizing WPNCS SG-8: Preservation of Expert Knowledge and Judgement Applied to Criticality Benchmarks

The Working Party on Nuclear Criticality Safety (WPNCS) under the guidance of the Organization for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) has over 20 years of experience addressing concerns related to static and transient configurations encountered within the nuclear fuel cycle: fuel fabrication, transportation, reprocessing, storage, and geological disposal. One of the cornerstone activities of the WPNCS is the International Criticality Safety Benchmark Evaluation Project (ICSBEP), which was established to identify a comprehensive set of criticality benchmark data, evaluate the data, including quantification of overall uncertainties; compile the data into a standardized format, perform sample calculations utilizing modern nuclear data sets and codes utilized in nuclear criticality safety, and formally document the work into a single source of verified benchmark data. Annually, members of the ICSBEP Technical Review Group (TRG) contribute evaluated benchmark data that undergoes comprehensive technical review prior to publication in the ICSBEP Handbook. In the years since the ICSBEP was established, there has been much work to prepare benchmark data to support validation activities in nuclear criticality safety. The 2020 edition of the ICSBEP Handbook contains acceptable benchmark specifications for 5,053 critical, subcritical, or near-critical configurations in 582 benchmark evaluations. Modern benchmark development benefits from decades of experienced international participants, a well-established handbook format, supplementary guides to deal with uncertainty quantification, and a comprehensive review process based upon independent reviews from international experts. The ICSBEP Handbook also contains 838 configurations deemed unacceptable to support criticality safety efforts. They are recorded, with the reasoning for their rejection, to preserve the experimental data, prevent reevaluation of data that are incomplete or contain known errors, and/or to potentially allow future reevaluation of the experiment pending the identification of sufficient data to resolve identified inconsistencies and errors. Users of the ICSBEP Handbook today might notice that the rigor and quality of modern criticality safety benchmarks is much greater than those prepared within the initial decade of the project. Benchmarks with 1s uncertainties in k eff greater than 1% were traditionally rejected unless they were identified as unique experiment types that encompassed materials, fuels, or designs not available from other benchmark experiments. However, benchmarks developed using modern experimental techniques and practices typically have uncertainties on the order of a few tenths of a percent. There have been ongoing efforts to improve the overall quality of previously published benchmark evaluations. Seventy-eight evaluations, containing approximately 600 configurations, have been revised just within the past decade. An additional eleven benchmarks are under revision for updated release in the 2020 edition of the ICSBEP Handbook. If some of the historic benchmarks were resubmitted in their current form to the TRG today, they would be rejected due to lack of data, missing components in the uncertainty analysis, or incomplete benchmark model development. The use of historic criticality safety benchmarks that underestimate the total uncertainty, lack properly quantified biases, or provide inadequate benchmark specifications do not sufficiently support modern criticality safety and nuclear data efforts. Although the ICSBEP Handbook is recognized by regulating bodies to support criticality safety, users are required to justify their reasons to ignore historic benchmark data and include additional safety margins within their designs. Discussions were held at the WPNCS 23rd Annual Meeting in September 2019 regarding the aforementioned issues. The resultant decision was to establish Subgroup 8 (SG-8): Preservation of Expert Knowledge and Judgement Applied to Criticality Benchmarks. The current activities of SG-8 are discussed herein.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analytic Insights into the Neutronic Characteristics of Neutron Moderators from MCNP Calculations

In the course of re-processing the ENDF/B VIII.0 thermal scattering law data, formulas and data checking insights were developed from MCNP calculations into the neutronic characteristics of moderators. Infinite medium test calculations were carried out in MCNP as part of the verification effort for the ACE formatted thermal scattering files. Edit results from MCNP were combined with derived results to formulate several equations which give analytic insights into the neutronic behavior of moderators.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of SCALE Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI) from SCALE 5 through SCALE 6.2

This review paper provides an abbreviated historical review of the development of the TSUNAMI capabilities in SCALE, beginning with the first initiatives, to provide new insights into validation, uncertainty quantification, and safety assessment. The tools of TSUNAMI have evolved substantially over two decades to meet the growing application analysis and experiment design needs. Even more advancements are emerging as the next generation of innovators continue to use and develop these tools.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Updated Primers Generated for SCALE 6.2 for KENO V.a and KENO-VI

Primers were developed and published for the use of the KENO V.a and KENO-VI codes in 2005 and 2008, respectively. These primers were both developed for SCALE 5 using the GeeWiz graphical user interface (GUI). Many new capabilities have been added to the transport codes since the release of these primers. The GUI was also changed to Fulcrum with the release of SCALE 6.2. For these reasons, updated versions of both primers were developed for a planned released in September 2020. The KENO V.a and KENO-VI codes are almost always run within the associated CSAS5 and CSAS6 sequences within SCALE, so the primers use the sequences and do not address running the codes in stand-alone mode.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation of MCNP Critical Benchmark Models of PU-MET-FAST-016

A new centralized repository of high-quality MCNP models of critical benchmark experiments is currently under development at Los Alamos National Laboratory (LANL). The repository is the combined effort of the Nuclear Criticality Safety, Nuclear Data, and Monte Carlo code development/application organizations at LANL. The initial set of benchmark models in the repository are derived from the Whisper Suite provided with MCNP6.2 and are evaluated against the benchmark experiments described in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. The goal is to build a single LANL benchmark collection that is up to date with the latest ICSBEP revision, has a formal review and revision process, is contained in an open-source repository, and utilizes new Python tools for improved input and output file review. This paper describes the validation of the models associated with PU-MET-FAST-016, “Flooded 3X3X3 Arrays of 3-kg Plutonium (Pu) Metal Cylinders – Phase I”. In this critical experiment, twenty-seven 3-kg Pu metal cylinders with a height of 46.33 ± 0.15 mm and diameter of 65.25 ± 0.05 mm were arranged in a cubic array. The Pu cylinders were sealed in aluminum cans, and three cans were placed in each of nine perforated aluminum sleeves, as shown in Fig. 1. The nine sleeves were supported by an aluminum frame that allowed for control of the lateral spacing of the cylinders, both in the X and Y directions. The benchmark experiment measured thirteen configurations. Of these configurations, six were modeled using MCNP.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of ISO and ANSI/ANS Nuclear Criticality Safety Standards

This paper provides a high-level comparison between the international and domestic Nuclear Criticality Safety (NCS) standards, as requested by members of the Nuclear Criticality Safety Division. Currently, there are 18 enacted American National Standards Institute (ANSI)/American National Standards (ANS) and 1 ANSI/ANS standard in progress. There are 11 NCS standards from the International Organization for Standardization (ISO), Technical Committee 85 (TC85) on Nuclear Energy, Subcommittee 5 (SC5) on Nuclear Fuel Cycle, Working Group 8 (WG8). There are NCS standard revisions in progress for both standards organizations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗