Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80

Verification of the ideal magnetohydrodynamic response at rational surfaces in the VMEC code

The VMEC nonlinear ideal MHD equilibrium code [S. P. Hirshman and J. C. Whitson, Phys. Fluids 26, 3553 (1983)] is compared against analytic linear ideal MHD theory in a screw-pinch-like configuration. The focus of such analysis is to verify the ideal MHD response at magnetic surfaces which possess magnetic transform (ι) which is resonant with spectral values of the perturbed boundary harmonics. A large aspect ratio circular cross section zero-beta equilibrium is considered. This equilibrium possess a rational surface with safety factor q = 2 at a normalized flux value of 0.5. A small resonant boundary perturbation is introduced, exciting a response at the resonant rational surface. The code is found to capture the plasma response as predicted by a newly developed analytic theory that ensures the existence of nested flux surfaces by allowing for a jump in rotational transform (ι=1/q). The VMEC code satisfactorily reproduces these theoretical results without the necessity of an explicit transform discontinuity (Δι) at the rational surface. It is found that the response across the rational surfaces depends upon both radial grid resolution and local shear (dι/dΦ, where ι is the rotational transform and Φ the enclosed toroidal flux). Calculations of an implicit Δι suggest that it does not arise due to numerical artifacts (attributed to radial finite differences in VMEC) or existence conditions for flux surfaces as predicted by linear theory (minimum values of Δι). Scans of the rotational transform profile indicate that for experimentally relevant levels of transform shear the response becomes increasing localised. Furthermore, careful examination of a large experimental tokamak equilibrium, with applied resonant fields, indicates that this shielding response is present, suggesting the phenomena is not limited to this verification exercise.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of substrate material on the growth and field emission characteristics of large-area carbon nanotube forests

Carbon nanotubes (CNTs) are a promising replacement for tungsten filaments as electron emitters in conventional x-ray sources, owing to their higher aspect ratio, superior mechanical stability, chemical inertness, and high electrical and thermal conductivities. Conditions for realizing the best emission behavior from CNTs have been formulated over the last few years. In this paper, we report the relatively less-investigated factor, namely, the influence of the nature of substrate material on the growth as well as field emission characteristics of large-area multiwalled CNTs for their practical application in medical x-ray sources. We compare the morphology of CNTs on a variety of substrates such as stainless steel, copper, molybdenum, graphite, few-layer graphene, and carbon nanowalls grown by thermal chemical vapor deposition following a simple drop-coating of catalyst. We find that CNTs grown on stainless steel and graphite show the best combination of emission characteristics under pulsed operation mode. These studies are helpful in selecting the optimum substrate material for field emission applications. Ex situ studies on field emission degradation of CNTs are presented towards the end.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pristine carbon nanotubes based resistive temperature sensor

A good sensor must be highly sensitive, faster in response, of low cost cum easily producible, and highly reliable. Incorporation of nano-dimensional particles/ wires makes conventional sensors more effective in terms of fulfilling the above requirements. For example, Carbon Nanotubes (CNTs) are promising sensing element because of its large aspect ratio, unique electronic and thermal properties. In addition to their use for widely reported chemical sensing, it has also been explored for temperature sensing. This paper presents the fabrication of CNTs based temperature sensor, prepared on silicon substrate using low cost spray coating method, which is reliable and reproducible method to prepare uniform CNTs thin films on any substrate. Besides this, simple and inexpensive method of preparation of dispersion of single walled CNTs (SWNTs) in 1,2 dichlorobenzene by using probe type ultrasonicator for debundling the CNTs for improving sensor response were used. The electrical contacts over the dispersed SWNTs were taken using silver paste electrodes. Fabricated sensors clearly show immediate change in resistance as a response to change in temperature of SWNTs. The measured sensitivity (change in resistance with temperature) of the sensor was found ∼ 0.29%/°C in the 25°C to 60°C temperature range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oblique patterned etching of vertical silicon sidewalls

A method for patterning on vertical silicon surfaces in high aspect ratio silicontopography is presented. A Faraday cage is used to direct energetic reactive ions obliquely through a patterned suspended membrane positioned over the topography. The technique is capable of forming high-fidelity pattern (100 nm) features, adding an additional fabrication capability to standard top-down fabrication approaches.

36 MATERIALS SCIENCE↗

Magnetic vortex in epitaxially-grown Co{sub 2}(Fe,Mn)Si alloy

We report magnetic vortex formation in epitaxially grown Co{sub 2}Fe{sub 0.4}Mn{sub 0.6}Si (CFMS) Heusler alloy discs that was confirmed using photoemission electron microscopy and the magneto-optical Kerr effect. The phase diagram of magnetic domain structures as functions of the disc thickness (t) and diameter (D) indicates that the magnetic vortex is stable in wide ranges of t and D even for the epitaxial CFMS. The annihilation field of vortex core depended not only on the disc aspect ratio but also on t. Numerical simulation suggests that this t dependence results from extrinsic pinning of a vortex core due to the epitaxial growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective-area growth of heavily n–doped GaAs nanostubs on Si(001) by molecular beam epitaxy

Using an aspect ratio trapping technique, we demonstrate molecular beam epitaxy of GaAs nanostubs on Si(001) substrates. Nanoholes in a SiO{sub 2} mask act as a template for GaAs-on-Si selective-area growth (SAG) of nanostubs 120 nm tall and ≤100 nm in diameter. We investigate the influence of growth parameters including substrate temperature and growth rate on SAG. Optimizing these parameters results in complete selectivity with GaAs growth only on the exposed Si(001). Due to the confined-geometry, strain and defects in the GaAs nanostubs are restricted in lateral dimensions, and surface energy is further minimized. We assess the electrical properties of the selectively grown GaAs nanostubs by fabricating heterogeneous p{sup +}–Si/n{sup +}–GaAs p–n diodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature ammonia and VOC sensing properties of CuO nanorods

Here, we report a NH{sub 3} and Volatile Organic Compounds (VOCs) sensing prototype of CuO nanorods with peculiar sensing characteristics at room temperature. High quality polycrystalline nanorods were synthesized by a low temperature hydrothermal method. The rods are well oriented with an aspect ratio of 5.71. Luminescence spectrum of CuO nanorods exhibited a strong UV-emission around 415 nm (2.98 eV) which arises from the electron-hole recombination phenomenon. The absence of further deep level emissions establishes the lack of defects such as oxygen vacancies and Cu interstitials. At room temperature, the sensor response was recorded over a range of gas concentrations from 100-600 ppm of ammonia, ethanol and methanol. The sensor response showed power law dependence with the gas concentration. This low temperature sensing can be validated by the lower value of calculated activation energy of 1.65 eV observed from the temperature dependent conductivity measurement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-performance polyimide nanocomposites with core-shell AgNWs@BN for electronic packagings

The increasing density of electronic devices underscores the need for efficient thermal management. Silver nanowires (AgNWs), as one-dimensional nanostructures, possess a high aspect ratio and intrinsic thermal conductivity. However, high electrical conductivity of AgNWs limits their application for electronic packaging. We synthesized boron nitride-coated silver nanowires (AgNWs@BN) using a flexible and fast method followed by incorporation into synthetic polyimide (PI) for enhanced thermal conductivity and dielectric properties of nanocomposites. The thinner boron nitride intermediate nanolayer on AgNWs not only alleviated the mismatch between AgNWs and PI but also enhanced their interfacial interaction. Hence, the maximum thermal conductivity of an AgNWs@BN/PI composite with a filler loading up to 20% volume was increased to 4.33 W/m K, which is an enhancement by nearly 23.3 times compared with that of the PI matrix. The relative permittivity and dielectric loss were about 9.89 and 0.015 at 1 MHz, respectively. Compared with AgNWs@SiO{sub 2}/PI and Ag@BN/PI composites, boron nitride-coated core-shell structures effectively increased the thermal conductivity and reduced the permittivity of nanocomposites. The relative mechanism was studied and discussed. This study enables the identification of appropriate modifier fillers for polymer matrix nanocomposites.

36 MATERIALS SCIENCE↗

10 nm gap bowtie plasmonic apertures fabricated by modified lift-off process

Bowtie plasmonic apertures, with gap sizes down to 11 nm and silver film thickness of up to 150 nm (aspect ratio ∼14:1), were fabricated on a silicon nitride membrane. Transmission spectra feature the aperture resonances ranging from 470 to 687 nm, with quality factors around 10. The mode area of the smallest gap aperture is estimated to be as small as 0.002 (λ/n)2 using numerical modeling. Importantly, our fabrication technique, based on an e-beam lithography and a lift-off process, is scalable which allows fabrication of many devices in parallel over a relatively large area. We believe that the devices demonstrated in this work will find application in studying and engineering light-matter interactions.

Huang, I-Chun↗

General theory of the plasmoid instability

In a general theory of the onset and development of the plasmoid instability is formulated by means of a principle of least time. We derive and show the scaling relations for the final aspect ratio, transition time to rapid onset, growth rate, and number of plasmoids that depend on the initial perturbation amplitude ($\hat{w}$ 0 ), the characteristic rate of current sheet evolution (1/τ), and the Lundquist number (S). They are not simple power laws, and are proportional to S α τ β [ln f(S,τ,$\hat{w}$ 0 )] σ . Finally, the detailed dynamics of the instability is also elucidated, and shown to comprise of a period of quiescence followed by sudden growth over a short time scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma turbulence in the scrape-off layer of the ISTTOK tokamak

The properties of plasma turbulence in a poloidally limited scrape-off layer (SOL) are addressed, with focus on ISTTOK, a large aspect ratio tokamak with a circular cross section. Theoretical investigations based on the drift-reduced Braginskii equations are carried out through linear calculations and non-linear simulations, in two- and three-dimensional geometries. The linear instabilities driving turbulence and the mechanisms that set the amplitude of turbulence as well as the SOL width are identified. A clear asymmetry is shown to exist between the low-field and the high-field sides of the machine. Finally, while the comparison between experimental measurements and simulation results shows good agreement in the far SOL, large intermittent events in the near SOL, detected in the experiments, are not captured by the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helical temperature perturbations associated with radially asymmetric magnetic island chains in tokamak plasmas

The simple analysis of Rutherford is generalized in order to incorporate radial magnetic island asymmetry into the nonlinear theory of tearing mode stability in a low- β , large aspect-ratio, quasi-cylindrical, tokamak plasma. The calculation is restricted to cases in which the radial shifts of the island X- and O-points are (almost) equal and opposite. For the sake of simplicity, the calculation concentrates on a particular (but fairly general) class of radially asymmetric island magnetic flux-surfaces that can all be mapped to the same symmetric flux-surfaces by means of a suitable coordinate transform. Finally, the combination of island asymmetry (in which the radial shifts of the X- and O-points are almost equal and opposite) and temperature-induced changes in the inductive current profile in the immediate vicinity of the island is found to have no effect on tearing mode stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gravitational steady states of solar coronal loops

Coronal loops on the surface of the sun appear to consist of curved, plasma-confining magnetic flux tubes or “ropes,” anchored at both ends in the photosphere. Toroidal loops carrying current are inherently unstable to expansion in the major radius due to toroidal-curvature-induced imbalances in the magnetic and plasma pressures. An ideal MHD analysis of a simple isolated loop with density and pressure higher than the surrounding corona, based on the theory of magnetically confined toroidal plasmas, shows that the radial force balance depends on the loop internal structure and varies over parameter space. It provides a unified picture of simple loop steady states in terms of the plasma beta β o , the inverse aspect ratio ϵ = a/R o , and the MHD gravitational parameter $\hat{G}$ ≡ ga/v$2\atop{A}$, all at the top of the loop, where g is the acceleration due to gravity, a the average minor radius, and v A the shear Alfvén velocity. In the high and low beta tokamak orderings, β o = 2n o T/(B$2\atop{0}$/2μ o ) ~ ϵ 1 and ϵ 2 , that fit many loops, the solar gravity can sustain nonaxisymmetric steady states at $\hat{G}$ ~ ϵβ o that represent the maximum stable height. At smaller \hat{G} ≤ ϵ 2 β o , the loop is axisymmetric to leading order and stabilized primarily by the two fixed loop ends. Very low beta, nearly force-free, steady states with β o ~ ϵ 3 may also exist, with or without gravity, depending on higher order effects. The thin coronal loops commonly observed in solar active regions have ϵ ≃ 0.02 and fit the high beta steady states. $\hat{G}$ increases with loop height. Fatter loops in active regions that form along magnetic neutral lines and may lead to solar flares and Coronal Mass Ejections have ϵ ≃ 0.1–0.2 and may fit the low beta ordering. Larger loops tend to have $\hat{G}$ > ϵβ o and be unstable to radial expansion because the exponential hydrostatic reduction in the density at the loop-top reduces the gravitational force -ρ$\hat{G}\hat{R}$ below the level that balances expansion, also in agreement with the observation that most sufficiently large loops grow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficiency of wave-driven rigid body rotation toroidal confinement

The compensation of vertical drifts in toroidal magnetic fields through a wave-driven poloidal rotation is compared with compensation through the wave driven toroidal current generation to support the classical magnetic rotational transform. The advantages and drawbacks associated with the sustainment of a radial electric field are compared with those associated with the sustainment of a poloidal magnetic field both in terms of energy content and power dissipation. The energy content of a radial electric field is found to be smaller than the energy content of a poloidal magnetic field for a similar set of orbits. Finally, the wave driven radial electric field generation efficiency is similarly shown, at least in the limit of large aspect ratio, to be larger than the efficiency of wave-driven toroidal current generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Carbon nanotube stabilized single layer graphene cantilevers

In this work, we demonstrate a method to fabricate single-layer graphene cantilevers by utilizing multiwalled carbon nanotube (MWNT) stabilizing elements. Cantilevers are produced by focused ion beam milling of suspended graphene with MWNTs on the surface. Stable structures with an aspect ratio of at least 5 can be reliably produced and are found to be considerably stiffer than expected based on the theoretical bending stiffness of a graphene sheet. In conclusion, this process substantially extends the current limits of single-layer graphene cantilever fabrication, facilitating the study of atomically thin membranes and production of previously unrealized nanoelectromechanical systems.

36 MATERIALS SCIENCE↗

Sausage instabilities on top of kinking lengthening current-carrying magnetic flux tubes

We theoretically explore the possibility of sausage instabilities developing on top of a kink instability in lengthening current-carrying magnetic flux tubes. Observations indicate that the dynamics of magnetic flux tubes in our cosmos and terrestrial experiments can involve topological changes faster than time scales predicted by resistive magnetohydrodynamics. Recent laboratory experiments suggest that hierarchies of instabilities, such as kink and Rayleigh-Taylor, could be responsible for initiating fast topological changes by locally accessing two-fluid and kinetic regimes. Sausage instabilities can also provide this coupling mechanism between disparate scales. Flux tube experiments can be classified by the flux tube's evolution in a configuration space described by a normalized inverse aspect-ratio $\bar{k}$ and current-to-magnetic flux ratio $\bar{λ}$. A lengthening current-carrying magnetic flux tube traverses this $\bar{k}$-$\bar{λ}$ space and crosses stability boundaries. We derive a single general criterion for the onset of the sausage and kink instabilities in idealized magnetic flux tubes with core and skin currents. The criterion indicates a dependence of the stability boundaries on current profiles and shows overlapping kink and sausage unstable regions in the $\bar{k}$-$\bar{λ}$ space with two free parameters. Finally, numerical investigation of the stability criterion reduces the number of free parameters to a single one that describes the current profile and confirms the overlapping sausage and kink unstable regions in $\bar{k}$-$\bar{λ}$ A lengthening, ideal current-carrying magnetic flux tube can therefore become sausage unstable after it becomes kink unstable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lateral capacity assessment of offshore wind suction bucket foundation in clay via centrifuge modelling

The lateral bearing behaviors of suction bucket foundations for offshore wind turbines are investigated by centrifuge modelling in this paper. The centrifuge tests were performed in lightly over-consolidated clay and heavily over-consolidated clay, and three bucket foundation models with aspect ratios of 0.38, 0.5, and 1.3 were tested. The tests were force-controlled, and both static loads and cyclic loads were applied. In static tests, ultimate bearing capacities of suction bucket foundations were extracted from load-displacement curves as the first method, and the results were reinforced by stiffness-displacement curves. The displacement rates were calculated to find critical bearing capacities and ultimate bearing capacities of the foundations as the second method. The cyclic tests include cyclic loads with uniform and increased amplitudes. The accumulated lateral displacements and secant stiffnesses were discussed, and their variations with cycle numbers were studied.

17 WIND ENERGY↗

Energetic-particle-modified global Alfven eigenmodes

Fully self-consistent hybrid MHD/particle simulations reveal strong energetic particle modifications to sub-cyclotron global Alfvén eigenmodes (GAEs) in low-aspect ratio, NSTX-like conditions. Key parameters defining the fast ion distribution function—the normalized injection velocity v 0 /v A and central pitch—are varied in order to study their influence on the characteristics of the excited modes. It is found that the frequency of the most unstable mode changes significantly and continuously with beam parameters, in accordance with the Doppler-shifted cyclotron resonances which drive the modes, and depending most substantially on v 0 /v A . This unexpected result is present for both counter-propagating GAEs, which are routinely excited in NSTX, and high frequency co-GAEs, which have not been previously studied. Large changes in frequency without clear corresponding changes in the mode structure are signatures of an energetic particle mode, referred to here as an energetic-particle-modified GAE. In conclusion, additional simulations conducted for a fixed MHD equilibrium demonstrate that the GAE frequency shift cannot be explained by the equilibrium changes due to energetic particle effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗