Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Experimental Investigation of Fuel Staging Effect on Modal Dynamics of Thermoacoustic Azimuthal Instabilities in a Multi-Nozzle Can Combustor

Abstract This paper analyzes the dynamics of unstable azimuthal thermoacoustic modes in a lean premixed combustor. Azimuthal modes can be decomposed into two counter rotating waves where they can either compete and potentially suppress one of them (spinning) or coexist (standing), depending on the operating conditions. This paper describes experimental results of the dynamical behaviors of these two waves. The experimental data were taken at different mass flow rates as well as different azimuthal fuel staging in a multi-nozzle can combustor. It is shown that at a low flow rate with uniform fuel distribution, the two waves have similar amplitudes, giving rise to a standing wave. However, the two amplitudes are slowly oscillating out of phase to each other, and the phase difference between the two waves also shows oscillatory behavior. For an intermediate flow rate, the dynamics show intermittency between standing and spinning waves, indicating that the system is bistable. In addition, the phase difference dramatically shifts when the mode switches between standing and spinning waves. For a high flow rate, the system stabilizes at a spinning wave most of the time. These experimental observations demonstrate that not only the amplitudes of two waves but also the phase difference plays an important role in the dynamics of azimuthal mode. For non-uniform azimuthal fuel staging, the modal dynamics exhibit only an oscillatory standing wave behavior regardless of the mass flow rate. Compared to the uniform fuel staging, however, the pressure magnitude is considerably reduced, which provides a potential strategy to mitigate and/or suppress the instabilities.

Kim, J.↗
DOE OSTI2024

Speed of sound in methane under conditions of planetary interiors

We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3 ± 0.1 eV and 0.8 ± 0.1 g/ cm − 3 , corresponding to a pressure of ∼ 13 GPa. Inelastic x-ray scattering was used to observe the collective oscillations of the ions. With a highly improved energy resolution of ∼ 50 meV, we could clearly distinguish the Brillouin peaks from the quasielastic Rayleigh feature. Data at different wave numbers were utilized to derive a sound speed of 5.9 ± 0.5 km/s, marking a high-temperature data point for methane and demonstrating consistency with Birch's law in this parameter regime. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Improving the Discovery Power of the Dark Energy Survey Gravitational Wave Program in Its Fourth Observing Campaign

The universe is growing at an accelerated rate, yet the several experiments and science cases used to measure this property yield conflicting results for the rate. Known colloquially as the Hubble tension problem, this discrepancy calls for a novel measurement of the Hubble Constant, H0, in order to be resolved. The Dark Energy Survey Gravitational Wave group (DESGW) aims to relieve this tension by performing a standard sirens measurement of H0 independent of traditional methods. To do so in the current era of data abundance and limited telescope time demands a robust, optimized, and complete science software pipeline to carefully balance the transition from gravitational wave data to state-of-the-art images, images to photometric data, and photometric data to identification and analysis of electromagnetic counterparts to gravitational wave signals. This thesis details the contributions of the author to the DESGW Search & Discovery Pipeline for the fourth observing run of the LIGO/Virgo/KAGRA gravitational wave detector network, as well as the science applications that have been pursued.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Phase-weighted slant stacking for surface wave dispersion measurement

SUMMARY Surface wave retrieval from ambient noise records using seismic interferometry techniques has been widely used for multiscale shear wave velocity (Vs) imaging. One key step during Vs imaging is the generation of dispersion spectra and the extraction of a reliable dispersion curve from the retrieved surface waves. However, the sparse array geometry usually affects the ability for high-frequency (>1 Hz) seismic signals’ acquisition. Dispersion measurements are degraded by array response due to sparse sampling and often present smeared dispersion spectra with sidelobe artefacts. Previous studies usually focus on interferograms’ domain (e.g. cross-correlation function) and attempt to enhance coherent signals before dispersion measurement. We propose an alternative technique to explicitly deblur dispersion spectra through use of a phase-weighted slant-stacking algorithm. Numerical examples demonstrate the strength of the proposed technique to attenuate array responses as well as incoherent noise. Three different field examples prove the flexibility and superiority of the proposed technique: the first data set consists of ambient noise records acquired using a nodal seismometer array; the second data set utilizes distributed acoustic sensing (DAS) and a marine fibre-optic cable to acquire a similar ambient noise data set; the last data set is a vibrator-based active-source surface wave data. The enhanced dispersion measurements provide cleaner and higher-resolution spectra without distortions which will assist both human interpreters as well as ML algorithms in efficiently picking curves for subsequent Vs inversion.

58 GEOSCIENCES↗
DOE OSTI2022

Utah FORGE: Results of Direct Shear Tests on Saturated Joints in Sierra White Granite

This dataset includes an Excel file with the results of direct shear tests to investigate the mechanical and geophysical response of saturated joints. Tests were conducted on induced tension-fractured Sierra White granite joints in a custom water pressurized chamber. The preparation of granite joints is summarized in the PDF file. The PDF file also includes a description of the direct shear tests, experimental procedure, and results.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Wave and Offshore Wind Resource in the U.S. Pacific Ocean Minor Outlying Islands

Coastal environments such as islands have unique opportunities for renewable energy resources. This work explores the wave and offshore wind energy potential for the U.S. Pacific Ocean Minor Outlying Islands, including Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Palmyra Atoll, and Wake Island. A numerical wave model based on WAVEWATCH III and SWAN (both are NWS / NOAA models) was developed, validated, and executed to generate a 32-year hindcast dataset suitable for resource characterization for each island. A complementary offshore wind resource characterization is provided for the same time period based on the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis v5 (ERA5). Each island has five netcdf files: 1. wave_[island]_annual_J_map.nc: the data used to generate the map of annual averaged omnidirectional wave power (J [kW/m]) 2. wave_[island]_100m_IEC: six IEC parameters at 100m isobath from 1979/01/01 to 2020/12/31, output hourly 3. wave_[island]_5km_IEC: six IEC parameters at 5km from the shoreline 1979/01/01 to 2020/12/31, output hourly 4. wind_island_100mASL_windspeed_timeseries.nc: wind speed timeseries from ERA5 at 100 m above sea level within a 60 km radius of the island (m/s) 1979/01/01 to 2010/12/31, output hourly 5. wind_island_100mASL_winddirection_timeseries.nc: wind direction timeseries from ERA5 at 100 m above sea level within a 60 km radius of the island (degrees) 1979/01/01 to 2010/12/31, output hourly

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Analysis of fusion alphas interaction with RF waves in D-T plasma at JET

This work studies the influence of RF waves in ICRH range of frequency on fusion alphas during the recent JET D-T campaign. Fusion alphas from D-T reactions are born with energies of about 3.5MeV and therefore have significant Doppler shift enabling synergistic interaction between them and RF waves at broad range of frequencies including the ones foreseen for future fusion machines ITER and SPARC. Resonant interaction between RF waves and alphas, also called synergistic effects, will modify the alpha distribution and ultimately will have an impact on alpha orbit losses and heating. Data from JET 3.43T/2.3MA pulses based on the hybrid scenario during the DTE2 campaign were used for the analysis in this study. The impact of synergistic effects on alpha orbit losses and alpha heating is assessed. Conclusions are based on analysis of experimental data for fast alphas losses, i.e. measurements from neutral particle analyser, fast ion losses scintillator detector, Faraday cups, and TRANSP simulations. Experimental data and TRANSP analysis indicate that there are indeed changes in the alphas' distribution function due to interaction with RF waves. Data from the scintillator detector and the Faraday cups were compared for pulses with and without ICRH power and versus cases with enhanced alpha losses due to MHD activities. The trends from these diagnostics consistently show no additional alpha losses due to interaction with RF waves. TRANSP predictions for the impact of the synergistic effects on alpha heating show up to 42% increase in alpha electron heating and up to 25% increase in alpha ion heating. These effects however become negligibly small, less than 1%, when alpha heating is compared to the total auxiliary hearting power in the investigated JET pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Periodic Narrowband Radio Wave Emissions and Inward Plasma Transport at Saturn's Magnetosphere

The abrupt brightening of an Energetic Neutral Atom (ENA) blob or cloud has been interpreted as plasma injection in the Kronian magnetosphere (termed ENA injection herein). Morphologically, there appears to be two types of abrupt ENA cloud brightening: (1) the brightening of a large cloud usually seen at distances >10–12 R {sub s} (R {sub s} ∼ 60,268 km) in the midnight or postmidnight region; (2) the brightening of a smaller cloud usually seen at distances <10–12 R {sub s} around 21–03 magnetic local time. Among many radio waves observed at Saturn, type 2 ENA injections correlate best with the 5 kHz narrowband (NB) waves. Using Cassini Ion and Neutral Camera (INCA) and Radio and Plasma Wave Science (RPWS) data, we examine the periodicities of the type 2 ENA injections and the 5 kHz NB emissions as well as their cross-correlations, which have been previously used to measure the lag times or phase differences. Because correlational analysis can only establish linear relationships, we also use mutual information to establish linear and nonlinear relationships. On average, the peak of the 5 kHz NB emission lags those of the type 2 ENA injection by about a few minutes to 2 hr. The injection of hot plasma to the inner magnetosphere can lead to temperature anisotropy, which can generate electrostatic upper hybrid waves, which upon encountering the high-density gradient at the outer edge of the Enceladus density torus, can mode convert to Z mode and then to O mode. The 5 kHz NB waves commonly propagate in the O mode.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Analysis of Σ* via isospin selective reaction 𝐾 𝐿 ⁢𝑝 →𝜋 + ⁢Σ 0

The isospin-selective reaction 𝐾 𝐿 ⁢𝑝 →𝜋 + ⁢Σ 0 provides a clean probe for investigating 𝐼 =1 Σ* resonances. In this work, we perform an analysis of this reaction using an effective Lagrangian approach for the first time, incorporating the well-established Σ⁡(1189)⁢1/2 + , Σ⁡(1385)⁢3/2 + , Σ⁡(1670)⁢3/2 − , and Σ⁡(1775)⁢5/2 − states, while also exploring contributions from other unestablished states. By fitting the available differential cross-section and recoil polarization data, adhering to partial-wave phase conventions same as the Particle Data Group, we find that besides the established resonances, contributions from Σ⁡(1660)⁢1/2 + , Σ⁡(1580)⁢3/2 − , and a Σ*⁢(1/2 − ) improve the description. Notably, a Σ*⁢(1/2 − ) resonance with mass around 1.54 GeV, consistent with Σ⁡(1620)⁢1/2 − , is found to be essential for describing the data in this channel, a stronger indication than found in previous analyses focusing on 𝜋⁢Λ final states. While providing complementary support for Σ⁡(1660)⁢1/2 + and Σ⁡(1580)⁢3/2 − , our results highlight the importance of the Σ⁡(1620)⁢1/2 − region in 𝐾 𝐿 ⁢𝑝 →𝜋 + ⁢Σ 0 . Future high-precision measurements are needed to solidify these findings and further constrain the Σ* spectrum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

All-sky search for continuous gravitational waves from isolated neutron stars using Advanced LIGO and Advanced Virgo O3 data

We present results of an all-sky search for continuous gravitational waves which can be produced by spinning neutron stars with an asymmetry around their rotation axis, using data from the third observing run of the Advanced LIGO and Advanced Virgo detectors. Four different analysis methods are used to search in a gravitational-wave frequency band from 10 to 2048 Hz and a first frequency derivative from -10 -8 to 10 -9 Hz/s. No statistically significant periodic gravitational-wave signal is observed by any of the four searches. As a result, upper limits on the gravitational-wave strain amplitude ℎ 0 are calculated. The best upper limits are obtained in the frequency range of 100 to 200 Hz and they are ~1.1 ×10 -25 at 95% confidence level. The minimum upper limit of 1.10 ×10 -25 is achieved at a frequency 111.5 Hz. In conclusion, we also place constraints on the rates and abundances of nearby planetary- and asteroid-mass primordial black holes that could give rise to continuous gravitational-wave signals.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Neural Network‐Based Methods for Ocean Surface Wave Measurement Using Submarine Distributed Acoustic Sensing (DAS)

Two new data-driven models for estimating ocean surface waves from distributed acoustic sensing (DAS) submarine cable strain rate are developed using supervised machine learning on a 10-day data set collected offshore of Oliktok Point, Alaska. The new models were trained on target data from seafloor pressure moorings at three sites spaced evenly along 27.1 km of cable and were benchmarked against an empirical transfer function method previously used to estimate waves from DAS. A model which uses convolutional neural networks to transform 2-km frequency-wavenumber strain spectra to seafloor pressure spectra outperforms the benchmark in wave height prediction (RMSE of 0.15 vs. 0.41 m) and period prediction (0.29 vs. 0.37 s) when evaluated on a held-out test data set. When applied to a DAS data set collected on the same cable 2 years prior, the CNN-based model maintained similar significant wave height performance (RMSE = 0.23 m) relative to available satellite altimetry data. A two-hidden-layer, fully connected neural network which transforms 1-D strain spectra to seafloor pressure spectra also outperforms the benchmark in wave height prediction (RMSE of 0.19 vs. 0.41 m), but does not generalize as well to the prior data. Regression-based machine learning is useful for estimating waves from DAS data when the pressure-strain relationship varies temporally and spatially across different wave conditions. Models can be applied to DAS data to measure waves with higher spatial resolution and longer temporal coverage than traditional methods, which often measure waves only at a single point.

Davis, Jacob R. [Univ. of Washington, Seattle, WA ↗
DOE OSTI2021

Spin wave interference detection via inverse spin Hall effect

Here, in this Letter, we present experimental data that demonstrate a spin wave interference detection using an inverse spin Hall effect (ISHE). Two coherent spin waves are excited in a yttrium-iron garnet waveguide by continuous microwave signals. The initial phase difference between the spin waves is controlled by the external phase shifter. The ISHE voltage is detected at a distance of 2 and 4 mm away from the spin wave generating antennas by an attached Pt layer. Experimental data show ISHE voltage oscillation as a function of the phase difference between the two interfering spin waves. This experiment demonstrates an intriguing possibility of using ISHE in a spin wave logic circuit converting a spin wave phase into an electric signal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Survey of Deep Learning and Physics-Based Approaches in Computational Wave Imaging

Computational wave imaging (CWI) extracts hidden structure and physical properties of a volume of material by analyzing wave signals that traverse that volume. Applications include seismic exploration of the Earth’s subsurface, acoustic imaging and nondestructive testing (NDT) in material science, and ultrasound computed tomography (USCT) in medicine. Current approaches for solving CWI problems can be divided into two categories: those rooted in traditional physics and those based on deep learning. Physics-based methods stand out for their ability to provide high-resolution and quantitatively accurate estimates of acoustic properties within the medium. However, they can be computationally intensive and are susceptible to ill-posedness and nonconvexity typical of CWI problems. Machine learning (ML)-based computational methods have recently emerged, offering a different perspective to address these challenges. Diverse scientific communities have independently pursued the integration of deep learning in CWI. This review discusses how contemporary scientific ML techniques, and deep neural networks in particular, have been developed to enhance and integrate with traditional physics-based methods for solving CWI problems. We present a structured framework that consolidates existing research spanning multiple domains, including computational imaging, wave physics, and data science. This study concludes with important lessons learned from existing ML-based methods and identifies technical hurdles and emerging trends through a systematic analysis of the extensive literature on this topic.

42 ENGINEERING↗
DOE OSTI2026

3⁢𝑄 magnetic order with spatially alternating spin scalar chirality in overdoped C⁢o 0.336⁢ Ta⁢S 2

C⁢o 𝑥 ⁢Ta⁢S 2 (𝑥≈1/3) exhibits a spontaneous Hall effect from spin texture in antiferromagnets, with a tetrahedral triple-Q (3Q) order and uniform spin scalar chirality. Upon Co overdoping (𝑥>1/3), it undergoes a shift in magnetic ordering vectors from 𝐐 m =(1/2, 0, 0) to (1/3, 0, 0). Interestingly, the spontaneous Hall effect disappeared in the overdoped regime, which was originally attributed to the loss of 3Q order. However, a question remains whether a new type of 3Q order can exist with alternating chirality in the overdoped regime. To address this, we investigated C⁢o 0.336⁢ Ta⁢S 2 using inelastic neutron scattering (INS), neutron diffraction, and optical dichroism, and found that INS data and spin-wave simulations support a 3Q order with alternating chirality. Moreover, neutron diffraction data show field-independent Bragg peaks, while linear dichroism detects no in-plane anisotropy, consistent with threefold rotation symmetry. Our data support the scenario of an alternating-chirality 3Q order in C⁢o 0.336 ⁢Ta⁢S 2 , canceling the spontaneous Hall effect. Furthermore, this study highlights a combined neutron-optical approach to identify complex spin textures.

Landau-Lifschitz-Gilbert equation↗
DOE OSTI2025

16 O + 16 O fusion at sub-coulomb energies

A simple optical model (OPM) method using non-monotonic (NM) potentials characterized by a repulsive core from the microscopic theory of the Pauli-led energy-density functional (EDF) has been developed to investigate the 16 O + 16 O fusion at sub-Coulomb energies relevant to the oxygen burning. Here, the study involves the analysis of the experimental fusion cross-section (FCS) data in energy range 6.92 ≤ E cm ≤ 13.83 MeV, which includes the Coulomb barrier region E cm = 10.0–11.92 MeV. Apart from an excellent description of the existing FCS data in the studied energy range, the associated hindrance, characterized by the S-factor reaching a maximum and then gradually falling off at lower energies, so far suggested empirically for the system, is reproduced down to 4 MeV for the first time in the simple OPM. An S-factor maximum of S 0 = 3.15 × 10 25 MeV.b at E 0 = 7.14 MeV is observed with T ≃ 2.6 GK, which conforms to the values reported for quiescent and explosive burning. Our reaction rate, deduced from the NM potential, compares well with the Caughlan and Fowler data. Dominant partial waves implicit in the observed maximum S-factor in the studied Gamow range are also explored. Our present findings, with the success of NM potentials, suggest that the nucleus–nucleus potential is non-monotonic.

16O+16O↗
DOE OSTI2024

FiberFlex: Real-time FPGA-based Intelligent and Distributed Fiber Sensor System for Pedestrian Recognition

In recent years, security monitoring of public places and critical infrastructure has heavily relied on the widespread use of cameras, raising concerns about personal privacy violations. To balance the need for effective security monitoring with the protection of personal privacy, we explore the potential of optical fiber sensors for this application. This article proposes FiberFlex, an intelligent and distributed fiber sensor system. Ultizing Field Programmable Gate Arrays (FPGA) high-level synthesis (HLS) acceleration, FiberFlex offers real-time pedestrian detection by co-designing the entire pipeline of optical signal acquisition, processing, and recognition networks based on the principles of optical fiber sensing. As a promising alternative to traditional camera-based monitoring systems, FiberFlex achieves pedestrian detection by analyzing the vibration patterns caused by pedestrian footsteps, enabling security monitoring while preserving individual privacy. FiberFlex comprises three modules: First , fiber-optic sensing system: A fiber-optic distributed acoustic sensing (DAS) system is built and used to measure the ground vibration waves generated by people walking. Second , algorithms: We first collect the training data by measuring the ground vibration waves, label the data, and use the data to train the neural network models to perform pedestrian recognition. Third , hardware accelerators: We use HLS tools to design hardware modules on FPGA for data collection and pre-processing and integrate them with the downstream neural network accelerators to perform in-line real-time pedestrian detection. The final detection results are sent back from FPGA to the host CPU. We implement our system FiberFlex with the in-house built DAS system and AMD/Xilinx Kintex7 FPGA KC705 board and verify the whole system using the real-world collected data. We conduct recognition tests on five test subjects of varying ages, heights, and weights in a fixed sensing area. Each subject experienced 20 real-time recognition tests using their daily walking habits, and the subjects were given adequate rest between tests. After 100 tests on five test subjects, the overall real-time recognition accuracy exceeded \(88.0\%\) . The whole system uses 55 W of power, 33 W in the optical DAS system and 22 W in the FPGA. Relying on its end-to-end interdisciplinary design, FiberFlex seamlessly combines fiber-optic sensors with FPGA accelerators to enable low-power real-time security monitoring without compromising privacy, making it a valuable addition to the existing security monitoring network. According to FiberFlex, more valuable research can be conducted in the future, such as fall monitoring for the elderly, migration of identification networks between different application scenarios, and improvement of anti-interference performance in more complex environments. In future perception networks, where the “eyes” are not feasible, let’s use fiber optic touch instead.

Distributed↗
DOE OSTI2021

Imaging the Shallow Structure of the Yucca Flat at the Source Physics Experiment Phase II Site with Horizontal-to-Vertical Spectral Ratio Inversion and a Large- N Seismic Array

The Source Physics Experiment (SPE) is a series of chemical explosions at the Nevada National Security Site (NNSS) with the goal of understanding seismic-wave generation and propagation of underground explosions. To understand explosion source physics, accurate geophysical models of the SPE site are needed. Here, we utilize a large-N seismic array deployed at the SPE phase II site to generate a shallow subsurface model of shear-wave velocity. The deployment consists of 500 geophones and covers an area of, approximately, 2.5 × 2 km. The array is located in the Yucca Flat in the northeast corner of the NNSS, Nye County, Nevada. Using ambient-noise recordings throughout the large-N seismic array, we calculate horizontal-to-vertical spectral ratios (HVSRs) across the array. We obtain 2D seismic images of shear-wave velocities across the SPE phase II site for the shallow structure of the basin. In this work the results clearly image two significant seismic impedance interfaces at ~150–500 and ~350–600 m depth. The shallower interface relates to the contrast between Quaternary alluvium and Tertiary volcanic rocks. The deeper interface relates to the contrast between Tertiary volcanic rocks and the Paleozoic bedrock. The 2D subsurface models support and extend previous understanding of the structure of the SPE phase II site. This study shows that the HVSR method in conjunction with a large-N seismic array is a quick and effective method for investigating shallow structures.

58 GEOSCIENCES↗