Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vertical axis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The 100-meter radiometer spacecraft study

A rigid body analysis of a baseline Large Space System (LSS) which is to function as a radiometer is presented. The LSS is placed in circular orbit about the Earth at an altitude of 650 km, subjected to environmental and vehicle interaction forces and torques, without an active control system of any type on board. The environment forces and torques are gravity gradient, solar radiation, and aerodynamic. Normal operation is in nadir pointing along the Z-local vertical axis. Orbital velocity is assigned to the x-axis of the spacecraft. The analysis is then used to demonstrate the ability or lack of the gravity gradient torques to stabilize the LSS over one complete orbit.

Zimbelman, H. F.↗
NASA NTRS1983

Measuring Epoxy-Curing Kinetics

Key reaction parameters estimated from single run. Single DSC Curve used to construct linearized plot from which kinetic reaction parameters are obtained: vertical axis intercept proportional to activation energy, while slope equals reaction order. DSC methods show promise for rapid screening and estimation of cure kinetic parameters of epoxy resins.

Cizmecioglu, M.↗
NASA NTRS1983

Classifying Particles By Acoustic Levitation

Separation technique well suited to material processing. Apparatus with rectangular-cross-section chamber used to measure equilibrium positions of low-density spheres in gravitational field. Vertical acoustic forces generated by two opposing compression drivers exciting fundamental plane-wave mode at 1.2 kHz. Additional horizontal drivers centered samples along vertical axis. Applications in fusion-target separation, biological separation, and manufacturing processes in liquid or gas media.

Barmatz, Martin B.↗
NASA NTRS1982

Description of the 3 MW SWT-3 wind turbine at San Gorgonio Pass, California

The SWT-3 wind turbine, a microprocessor controlled three bladed variable speed upwind machine with a 3MW rating that is presently operational and undergoing system testing, is discussed. The tower, a rigid triangular truss configuration, is rotated about its vertical axis to position the wind turbine into the prevailing wind. The blades rotate at variable speed in order to maintain an optimum 6 to 1 tip speed ratio between cut in and fated wind velocity, thereby maximizing power extraction from the wind. Rotor variable speed is implemented by the use of a hydrostatic transmission consisting of fourteen fixed displacement pumps operating in conjunction with eighteen variable displacement motors. Full blade pitch with on-off hydraulic actuation is used to maintain 3MW of output power.

Rybak, S. C.↗
NASA NTRS1983

Short-term and long-term clinostat and vibration-induced biochemical changes in dwarf marigold stems

Stems of 21-day dwarf marigold plants cultivated on the clinostat were compared with plants cultivated on vertical axis rotators ('vibrational controls') and stationary controls for long-term changes in cell wall composition. Stems of 21-day plants grown under stationary conditions and subsequently exposed to the clinostat for 24 hours were also analyzed. Among the long-term markers, calcium, lignin, and protein-bound hemicellulose (possibly cell wall glycoprotein) clearly differentiated the effects of vibration from those of the clinostat. Short-term differential responses included rate of ethylene production, nastic movement and peroxidase activity of the cell wall, but not of the protoplast.

Siegel, S. M.↗
NASA NTRS1985

Closed loop electrostatic levitation system

An electrostatic levitation system is described, which can closely control the position of objects of appreciable size. A plurality of electrodes surround the desired position of an electrostatically charged object, the position of the objects is monitored, and the voltages applied to the electrodes are varied to hold the object at a desired position. In one system, the object is suspended above a plate-like electrode which has a concave upper face to urge the object toward the vertical axis of the curved plate. An upper electrode that is also curved can be positioned above the object, to assure curvature of the field at any height above the lower plate. In another system, four spherical electrodes are positioned at the points of a tetrahedron, and the voltages applied to the electrodes are varied in accordance with the object position as detected by two sensors.

Rhim, W. K.↗
NASA NTRS1985

Gravity enhanced acoustic levitation method and apparatus

An acoustic levitation system is provided for acoustically levitating an object by applying a single frequency from a transducer into a resonant chamber surrounding the object. The chamber includes a stabilizer location along its height, where the side walls of the chamber are angled so they converge in an upward direction. When an acoustic standing wave pattern is applied between the top and bottom of the chamber, a levitation surface within the stabilizer does not lie on a horizontal plane, but instead is curved with a lowermost portion near the vertical axis of the chamber. As a result, an acoustically levitated object is urged by gravity towards the lowermost location on the levitation surface, so the object is kept away from the side walls of the chamber.

Barmatz, M. B.↗
NASA NTRS1985

Generation and transfer of polarized radiation in the solar atmosphere: Physical mechanisms and magnetic-field diagnostics

The main physical mechanisms responsible for the generation and transfer of polarized radiation in the solar atmosphere can be classified in a suitable bidimensional diagram with an indicator of the magnetic field strength on its vertical axis and an indicator of the radiation field anisotropy on its horizontal axis. The various polarimetric observations performed on solar spectral lines are interpreted with different theoretical schemes according to their classification in the diagram and to the optical depths involved. These theoretical schemes, and the associated diagnostic tools for inferring the magnetic field vector from observations are reviewed. In particular, the role of magneto-optical effects in determining the direction of the observed linear polarization in active regions is discussed in some detail.

Deglinnocenti, E. L.↗
NASA NTRS1985

Empirical model for the Earth's cosmic ray shadow at 400 KM: Prohibited cosmic ray access

The possibility to construct a unit sphere of access that describes the cosmic radiation allowed to an Earth-orbiting spacecraft is discussed. It is found that it is possible to model the occluded portion of the cosmic ray sphere of access as a circular projection with a diameter bounded by the satellite-Earth horizon. Maintaining tangency at the eastern edge of the spacecraft-Earth horizon, this optically occluded area is projected downward by an angle beta which is a function of the magnetic field inclination and cosmic ray arrival direction. This projected plane, corresponding to the forbidden area of cosmic ray access, is bounded by the spacecraft-Earth horizon in easterly directions, and is rotated around the vertical axis by an angle alpha from the eastern direction, where the angle alpha is a function of the offset dipole latitude of the spacecraft.

Humble, J. E.↗
NASA NTRS1984

Effects of clinostat rotation on mouse meiotic maturation in vitro

The effects of microgravity on meiosis, fertilization, and early embryonic development in mammals are being examined by using a clinostat to reorient the cells with respect to the gravity vector. A clinostat capable of supporting mammalian cells in tissue culture has been developed. Initial studies have focused on examining the effects of clinostat rotation on meiotic maturation in mouse oocytes. Oocytes recovered from ovarian follicles were subjected to clinostat rotation on a horizontal or vertical axis or to static conditions for a 16 hr period. No gross morphological changes and no effects on germinal vesicle breakdown were observed under any rotation conditions (1/4, 1, 10, 30, 100 RPM). Success of meiotic progression to Metaphase II was comparable among experimental and control groups except at 100 RPM, where a slight inhibition was observed.

Wolgemuth, D. J.↗
NASA NTRS1985

Analytical investigation of the dynamics of tethered constellations in Earth orbit, phase 2

This Quarterly Report deals with the deployment maneuver of a single-axis, vertical constellation with three masses. A new, easy to handle, computer code that simulates the two-dimensional dynamics of the constellation has been implemented. This computer code is used for designing control laws for the deployment maneuver that minimizes the acceleration level of the low-g platform during the maneuver.

Lorenzini, E.↗
NASA NTRS1985

Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase 2)

The deployment maneuver of three axis vertical constellations with elastic tethers is analyzed. The deployment strategy devised previously was improved. Dampers were added to the system. Effective algorithms for damping out the fundamental vibrational modes of the system were implemented. Simulations of a complete deployment and a subsequent station keeping phase of a three mass constellation is shown.

Lorenzini, E.↗
NASA NTRS1986

Plant growth chamber M design

Crop production is just one of the many processes involved in establishing long term survival of man in space. The benefits of integrating higher plants into the overall plan was recognized early by NASA through the Closed Ecological Life Support System (CELSS) program. The first step is to design, construct, and operate a sealed (gas, liquid, and solid) plant growth chamber. A 3.6 m diameter by 6.7 m high closed cylinder (previously used as a hypobaric vessel during the Mercury program) is being modified for this purpose. The chamber is mounted on legs with the central axis vertical. Entrance to the chamber is through an airlock. This chamber will be devoted entirely to higher plant experimentation. Any waste treatment, food processing or product storage studies will be carried on outside of this chamber. Its primary purpose is to provide input and output data on solids, liquids, and gases for single crop species and multiple species production using different nutrient delivery systems.

Prince, R. P.↗
NASA NTRS1987

Distortions of perceived visual directions out of pictures

Two experiments are reported examining judgments from 16 subjects who indicated the apparent direction of a photographed pointer that was rotated to different physical positions while being photographed. The photographs themselves were rotated about a vertical axis to several positions with respect to the subjects' central viewing axis. The results replicate the well-known distortion in apparent direction associated with photographed pointers positioned to project directly out of the plane of the photograph. This effect has been described by Goldstein (1979) as the 'differential rotation effect' because its magnitude is reduced as the depicted angle of the pointer becomes less orthogonal to the photograph. Analysis of the two-dimensional properties of the projected images shows that this differential rotation is related to projected angles on the surface of the photograph. This analysis may explain why circular objects often do not appear to be correctly drawn in the periphery of geometrically correct projections.

Ellis, Stephen R.↗
NASA NTRS1989

Characterization of thunderstorm induced Maxwell current densities in the middle atmosphere

Middle atmospheric transient Maxwell current densities generated by lightning induced charge perturbations are investigated via a simulation of Maxwell's equations. A time domain finite element analysis is employed for the simulations. The atmosphere is modeled as a region contained within a right circular cylinder with a height of 110 km and radius of 80 km. A composite conductivity profile based on measured data is used when charge perturbations are centered about the vertical axis at altitudes of 6 and 10 km. The simulations indicate that the temporal structure of the Maxwell current density is relatively insensitive to altitude variation within the region considered. It is also shown that the electric field and Maxwell current density are not generally aligned.

Baginski, Michael Edward↗
NASA NTRS1990

The susceptibility of rhesus monkeys to motion sickness

The susceptibility of rhesus monkeys to motion sickness was investigated using test conditions that are provocative for eliciting motion sickness in squirrel monkeys. Ten male rhesus monkeys and ten male Bolivian squirrel monkeys were rotated in the vertical axis at 150 deg/s for a maximum duration of 45 min. Each animal was tested in two conditions, continuous rotation and intermittent rotation. None of the rhesus monkeys vomited during the motion tests but all of the squirrel monkeys did. Differences were observed between the species in the amount of activity that occurred during motion test, with the squirrel monkeys being significantly more active than the rhesus monkeys. These results, while substantiating anecdotal reports of the resistance of rhesus monkeys to motion sickness, should be interpreted with caution because of the documented differences that exist between various species with regard to stimuli that are provocative for eliciting motion sickness.

Corcoran, Meryl L.↗
NASA NTRS1989

Eyes open versus eyes closed - Effect on human rotational responses

The effect of eyelid closure on the response to rotational vestibular stimulation was assessed by evaluating 16 normal human subjects with both earth vertical axis (EVA) and earth horizontal axis (EHA) yaw rotations with either eyes closed (EC) or eyes open in the dark (EOD). Results indicated that for EVA rotation, the subjects' responses were of larger magnitude and less variable with EOD than with EC. However, for EHA rotation, responses were of larger magnitude and equally variable with EC as compared to EOD. Data also indicated that the quality of the EHA response with EC was altered because eyelid closure influenced the amount of periodic gaze. It is concluded that eyelid closure has an effect upon both canalocular and otolithocular reflexes and it is suggested that both EVA and EHA rotational testing be performed with EOD rather than with EC.

Wall, Conrad, III↗
NASA NTRS1990

Historical development of the windmill

Throughout history, windmill technology represented the highest levels of development in those technical fields now referred to as mechanical engineering, civil engineering, and aerodynamics. Key stages are described in the technical development of windmills as prime movers; from antiquity to construction of the well known Smith-Putnam wind turbine generator of the 1940's, which laid the foundation for modern wind turbines. Subjects covered are windmills in ancient times; the vertical axis Persian windmill; the horizontal axis European windmill (including both post mills and tower mills); technology improvements in sails, controls, and analysis; the American farm windmill; the transition from windmills to wind turbines for generating electricity at the end of the 19th century; and wind turbine development in the first half of the 20th century.

Shepherd, Dennis G.↗