Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Simulations of turbulent mixing and reacting flows and their applications to turbulence modeling

The method of full simulation is applied to reacting turbulent flows. Full simulation has proven of great value as a complement to experiments for the study of nonreacting turbulent flows. It provides insight into the physics of turbulent flows and their modeling. It is natural to try to extend these methods to the simulation of reacting turbulent flows. Because this is one of the first attempts at this type of simulation, a subsidiary goal of this work is to demonstrate the feasibility of using simulation to study turbulent reacting flows. In addition, it is shown that such simulations can be used to provide physical insight into the nature of turbulent combustion and to provide data that will help to construct models that can be used in engineering simulations of turbulent reacting flows.

Ferziger, J. H.↗
NASA NTRS1986

Losses in Channels with Increased External Turbulence

An approximate method for determining the effect of the level of turbulence on the aerodynamic characteristics of convergent and diffuser channels is examined. A momentum equation for the boundary layer is in the method, introducing external flow turbulence on the basis of experimental values of the coefficient of friction and the form factor. It is found that at significant levels of external turbulence, losses must be considered not only in the boundary layer but also in the central region of the channel.

Zaryankin, A. Y.↗
NASA NTRS1986

Development of an explicit time marching procedure for laminar and turbulent flow

A finite-volume based, time-marching method for turbulent and laminar flows is described. Extensions to the computational procedure to allow the handling of shock induced separation and large regions of strong backflow are emphasized. Two test cases are considered, the United Technologies Research Center (UTRC) separated and reattached turbulent boundary layer and the strong shock case in the McDonnell Douglas Research Lab (MDRL) transonic diffuser G. The extended method worked well on the UTRC flow with a boundary layer blockage of 58% and a maximum backflow velocity of 37% of the local maximum free-stream velocity. It also worked well on the MDRL diffuser with a shock Mach number of 1.353 and a maximum backflow velocity of -71.7 m/s. A Mach number dependent interpolation formula for effective pressure was developed for use in density-update time-marching methods.

Source record↗
NASA NTRS1994

Embedded function methods for compressible high speed turbulent flow

This is the final report on the work performed on the grant 'Embedded Function Methods for Compressible High Speed Turbulent Flow' carried out at Lehigh University during the contract period from September, 1987, to October of 1991. Work has continued at Lehigh on this project on an unfunded basis to the present. The original proposed work had two separate thrusts which were associated with developing embedded function methods in order to obviate the need to expend computational resources on turbulent wall layers in Navier Stokes and boundary-layer calculations. Previous work on the incompressible problem had indicated that this could be done successfully for two-dimensional and three-dimensional incompressible flows. The central objective here was to extend the basic approach to the high speed compressible problem.

Walker, J. D. A.↗
NASA NTRS1990

Direct simulation of turbulent combustion

Understanding and modeling of turbulent combustion are key-problems in the computation of numerous practical systems. Because of the lack of analytical theories in this field and of the difficulty of performing precise experiments, direct simulation appears to be one of the most attractive tools to use in addressing this problem. The present work can be split into two parts: (1) Development and validation of a direct simulation method for turbulent combustion; (2) Applications of the method to premixed turbulent combustion problems. The goal of part 1 is to define and to test a numerical method for direct simulation of reacting flows. A high level of confidence should be attached to direct simulation results, and this can only be achieved through extensive validation tests. In part 2, direct simulation is used to address some of the many critical problems related to turbulent combustion. At the present time, I have limited this work to premixed combustion and considered only four basic issues: (1) The effect of pressure waves on flame propagation; (2) The interaction between flame fronts and vortices; (3) The influence of curvature on premixed flame fronts; and (4) The validation of flamelet models for premixed turbulent combustion.

Poinsot, T. J.↗
NASA NTRS1971

Calculation of compressible nonadiabatic boundary layers in laminar, transitional and turbulent flow by the method of integral relations

A computer program was developed to do the calculations for two-dimensional or axisymmetric configurations from low speeds to hypersonic speeds with arbitrary streamwise pressure, temperature, and Mach number distributions. Options are provided for obtaining initial conditions either from experimental information or from a theoretical similarity solution. The transition region can be described either by an arbitrary distribution of intermittency or by a function based on Emmons' probability theory. Correlations were developed for use in estimating the parameters of the theoretical intermittency function. Correlations obtained from other sources are used for estimating the transition point. Comparisons were made between calculated and measured boundary layer quantities for laminar, transitional, and turbulent flows on flat plates, cones, cone flares, and a waisted body of revolution. Excellent agreement was obtained between the present theory and two other theories based on the method of finite differences. The intermittency required to reproduce some experimental heat transfer results in hypersonic flow was found to be quite different from the theoretical function. It is suggested that the simple probability theory of Emmons may not be valid for representing the intermittency of hypersonic transitional boundary layers and that the program could be useful as a tool for detailed study of the intermittency of the transition region.

Kuhn, G. D.↗
NASA NTRS1989

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross section

Calculation methods for turbulent duct flows are generalized for ducts with arbitrary cross-sections. The irregular physical geometry is transformed into a regular one in computational space, and the flow equations are solved with a finite-volume numerical procedure. The turbulent stresses are calculated with an algebraic stress model derived by simplifying model transport equations for the individual Reynolds stresses. Two variants of such a model are considered. These procedures enable the prediction of both the turbulence-driven secondary flow and the anisotropy of the Reynolds stresses, in contrast to some of the earlier calculation methods. Model predictions are compared to experimental data for developed flow in triangular duct, trapezoidal duct and a rod-bundle geometry. The correct trends are predicted, and the quantitative agreement is mostly fair. The simpler variant of the algebraic stress model procured better agreement with the measured data.

Demuren, A. O.↗
NASA NTRS1994

Effects of the computational time step on numerical solutions for turbulent flow

Effects of large computational time steps on the computed turbulence were investigated using a fully implicit method. In turbulent channel flow computations the largest computational time step in wall units which led to accurate prediction of turbulence statistics was determined. Turbulence fluctuations could not be sustained if the computational time step was near or larger than the Kolmogorov time scale.

Choi, Haecheon↗
NASA NTRS1990

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross-section

Calculation methods for turbulent duct flows are generalized for ducts with arbitrary cross-sections. The irregular physical geometry is transformed into a regular one in computational space, and the flow equations are solved with a finite-volume numerical procedure. The turbulent stresses are calculated with an algebraic stress model derived by simplifying model transport equations for the individual Reynolds stresses. Two variants of such a model are considered. These procedures enable the prediction of both the turbulence-driven secondary flow and the anisotropy of the Reynolds stresses, in contrast to some of the earlier calculation methods. Model predictions are compared to experimental data for developed flow in triangular duct, trapezoidal duct and a rod-bundle geometry. The correct trends are predicted, and the quantitative agreement is mostly fair. The simpler variant of the algebraic stress model procured better agreement with the measured data.

Demuren, A. O.↗
NASA NTRS1967

Local measurements in turbulent flows through cross correlation of optical signals

Crossed beam correlation method measures turbulent fluctuations in transonic and supersonic flows. Two collimated beams of radiation are crossed at the point of interest in the flow, and the power loss of each beam is measured with two independent photodetectors, which yield information about the turbulent properties.

Fisher, M. J.↗
NASA NTRS1990

A defect stream function formulation for compressible turbulent boundary layers

Progress to date on the development of a method for turbulent, wall-bounded flow which uses the defect stream function formulation in the outer layer and an analytic law of the wall and wake formulation in the inner region is reviewed. This two-formulation approach avoids the need to computationally resolve the high-gradient inner layer. One of the most appealing recent developments is the transformation of the compressible governing equation for the defect stream function into a linear, second-order differential equation which has analytic solutions for many problems of practical interest. Numerical and analytic results for incompressible and compressible flows are shown to be in excellent agreement with experimental results. In this paper the two-formulation approach is applied to primitive-variable computations. Excellent comparisons with experiment are presented for two compressible flat plate flows.

Barnwell, Richard W.↗
NASA NTRS1973

A method for calculating unsteady turbulent boundary layers in two- and three-dimensional flows.

The governing equations for an unsteady turbulent boundary layer on a swept infinite cylinder, composed of a continuity equation, a pair of momentum equations and a pair of rate equations for the shear stress, based on the turbulent kinetic-energy equation, are solved numerically. These rate equations for the shear-stress express a balance between the convection, production, dissipation and diffusion of the turbulent shear stress components. Due to the physical model of turbulence employed, this system of equations is hyperbolic. An explicit, second-order accurate, conditionally stable difference scheme for this system, together with appropriate boundary and initial conditions, is formulated and developed into a computer program. Calculations for oscillating free stream flows with no pressure gradient show significant unsteady effects on the turbulent boundary layer.

Singleton, R. E.↗
NASA NTRS1974

Method for remotely sensing turbulence of planetary atmospheres

Based on variances of log-amplitude and phase fluctuations of radio occultation data received from orbital and fly-by missions, structure constant for Venusian planetary atmosphere has been estimated with high-confidence factor. Analysis indicates that effects of inhomogeneity, finite size, and superrefractivity of atmospheric turbulence cannot be ignored.

Woo, R. T.↗
NASA NTRS1960

Investigation by Schlieren Technique of Methods of Fixing Fully Turbulent Flow on Models at Supersonic Speeds

An investigation has been made of the effectiveness of two-dimensional wire and three-dimensional grandular-type roughnesses for fixing transition on a 27 deg cone at a free-stream Mach number of 2.20. One height of each type of roughness was investigated over a free-stream Reynolds number per foot range of about 1.0 x 10 (exp 6) to 7.0 x 10 (exp 6). The tests were made at an angle of attack of 0 deg and with essentially zero heat transfer. The results indicate that, within the Reynolds number per foot range investigated, both two-dimensional wire and three-dimensional granular types of roughness caused large forward movements of transition at constant Reynolds number per foot; however, the forward movement with increase in Reynolds number per foot was very slow for the two-dimensional wire roughness and transition never reached the roughness location as it did with the three-dimensional granular roughness. An extrapolated value of the roughness Reynolds number (based on roughness height and flow conditions at the outer edge of the roughness) for the first appearance of forward movement from the smooth-cone case for the three-dimensional granular roughness was in good agreement with the value of about 600 for the first appearance of turbulent bursts obtained on a similar cone by the hot-wire technique. The range of values of roughness Reynolds number for which a fully turbulent boundary layer existed in the vicinity of the roughness element was about 4,500 to 6,500.

Jackson, Mary W.↗