Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “texture (materials)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Texture and microstructure evolution in thermomechanically processed Mg-Ca and Mg-Zn-Ca alloys

Mg-Zn-Ca alloys have the potential for producing Mg alloy sheets with weaker basal textures and therefore improved formability. Thermomechanical processing (TMP) also plays a substantial role in determining the final sheet texture. The interplay of these variables, TMP and alloying, complicates comparisons of alloys across the literature. This work systematically explores the texture evolution and recrystallization behavior in Mg-Ca and Mg-Zn-Ca alloys during plane strain compression (PSC) using a Gleeble thermomechanical simulator. It is demonstrated that the basal texture intensity and texture characteristics change significantly during post-deformation annealing, particularly in the ternary alloys. It is also shown that careful selection of the TMP processing variables used during PSC is essential to producing weak textures. In particular, it is important to limit the recrystallization that occurs between compressive hits. This is achieved by adjusting solute content, strain rate, and the duration of the soak between passes.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Super-moiré spin textures in twisted two-dimensional antiferromagnets

Stacking two-dimensional layered materials offers a platform to engineer electronic and magnetic states. In general, the resulting states—such as moiré magnetism—have a periodicity at the length scale of the moiré unit cell. Here we study magnetic order in twisted double-bilayer chromium triiodide by means of scanning nitrogen-vacancy microscopy. We observe long-range magnetic textures extending beyond the single moiré unit cell, which we dub a super-moiré magnetic state. At small twist angles, the size of the spontaneous magnetic texture increases with twist angle, opposite to the underlying moiré wavelength. The spin-texture size reaches a maximum of about 300 nm in 1.1° twisted devices, an order of magnitude larger than the underlying moiré wavelength, and vanishes at twist angles above 2°. The obtained magnetic field maps suggest the formation of antiferromagnetic Néel-type skyrmions spanning multiple moiré cells. The twist-angle-dependent study, combined with large-scale atomistic Monte Carlo simulations, suggests that the magnetic competition between the Dzyaloshinskii–Moriya interaction, magnetic anisotropy and exchange interactions—which all depend on the relative rotation of the layers—produces the topological textures that emerge in the super-moiré spin order.

Wong, King Cho [Univ. of Stuttgart (Germany)] (ORC↗
DOE OSTI2024

Active learning for the design of polycrystalline textures using conditional normalizing flows

Generative modeling has opened new avenues for solving previously intractable materials design problems. However, these new opportunities are accompanied by a drastic increase in the required amount of training data. This is in stark juxtaposition to the high expense and difficulty in curating such large materials datasets. In this work, we propose a novel framework for integrating generative models within an active learning loop. Further, this enables the training of generative models with datasets significantly smaller than what has previously been demonstrated, providing a direct route for their application in data constrained environments. The functionality of this framework is then demonstrated by addressing the challenge of designing polycrystalline textures associated with target anisotropic mechanical properties. The developed protocol exhibited a cost reduction between 14 to 18 times over a randomly sampled experimental design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrodepositing Textured Sn Film as a Highly Reversible Anode for Aqueous Batteries

Electrodepositing metal materials in large capacity, at low potential, and with high reversibility serves as the foundation for any aqueous rechargeable battery chemistry to realize the promises of high energy, low cost, and high safety. However, such a foundation is not solid because of the natural tendency of metals to form irregular, nonplanar, and often dendritic morphologies during electrochemical crystallization, which is further amplified in an acidic environment due to the faster kinetics of the coupled proton and mass-transport processes between hydrated metal ions and free metal atoms. As a typical representative, tin metal (Sn 0 ) has potential to achieve high energy in acidic batteries, but its nonuniform large-particle morphology, obtained from traditional electrodeposition, leads to dead Sn 0 formation and deteriorating reversibility, accompanied by the sustained hydrogen evolution reaction (HER) and active Sn 0 loss. Here, in this study, we report quaternary onium salts as effective interfacial cocations that, via selective adsorption, steadily texturize Sn 0 deposition along the (211) plane, which is intrinsically inert to the HER, thus regulating the film deposition process by favoring the formation of planar Sn 0 film. Such Sn 0 film brings exceptional reversibility in acidic electrolytes, which translates into sustained cycling stability at applicable areal capacities in both anode-half cells (similar to 1500 deposition/dissolution cycles at 5 mAh cm -2 ) and full cells (350 charge/discharge cycles at 5 mAh cm -2 ). Textured electrodeposition with intrinsic HER-suppression capability provides a universal solution for diverse metal anode materials in rechargeable energy-dense aqueous batteries.

Sn metal↗
DOE OSTI2024

Highly Responsive Polar Vortices in All‐Ferroelectric Heterostructures

Abstract The discovery of polar vortices and skyrmions in ferroelectric‐dielectric superlattices [such as (PbTiO 3 ) n /(SrTiO 3 ) n ] has ushered in an era of novel dipolar topologies and corresponding emergent phenomena. The key to creating such emergent features has generally been considered to be related to counterpoising strongly polar and non‐polar materials thus creating the appropriate boundary conditions. This limits the utility these materials can have, however, by rendering (effectively) half of the structure unresponsive to applied stimuli. Here, using advanced thin‐film deposition and an array of characterization and simulation approaches, polar vortices are realized in all‐ferroelectric trilayers, multilayers, and superlattices built from the fundamental building block of (PbTiO 3 ) n /(Pb x Sr 1− x TiO 3 ) n wherein in‐plane ferroelectric polarization in the Pb x Sr 1− x TiO 3 provides the appropriate boundary conditions. These superlattices exhibit substantially enhanced electromechanical and ferroelectric responses in the out‐of‐plane direction that arise from the ability of the polarization in both layers to rotate to the out‐of‐plane direction under field. In the in‐plane direction, the layers are found to be strongly coupled during switching and when heterostructured with ferroelectric‐dielectric building blocks, it is possible to produce multistate switching. This approach expands the realm of systems supporting emergent dipolar texture formation and does so with entirely ferroelectric materials thus greatly improving their responses.

Kavle, Pravin↗
DOE OSTI2025

Influence of calcium nitrate timing on the structural and textural characteristics of mesoporous SiO 2 -CaO nanoparticles

Mesoporous bioactive glass nanoparticles (MBGNPs) are promising materials for drug delivery due to their high pore volume and specific surface area. This study investigates how the timing of calcium nitrate addition affects the structural and textural characteristics of MBGNPs synthesized via a microemulsion-assisted sol-gel method. Delayed calcium nitrate addition reduced calcium incorporation from 14.2 to 9.5 mol% and increased particle size from 178 ± 51 nm to 256 ± 30 nm. The specific surface area values increased with the delayed addition of calcium nitrate, as observed through BET and USAXS/SAXS measurements. The proportion of Q Si n units slightly changed, but no cytotoxicity was observed in osteoblast-like cells. These findings provide valuable insights into optimizing MBGNP synthesis for biomedical applications.

Calcium nitrate tetrahydrate↗
DOE OSTI2022

Characterization of Tri-lab β-Tin (Sn)

This report documents details of the microstructure and mechanical properties of -tin (Sn), that is used in the Tri-lab (Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL)) collaboration project on Multi-phase Tin Strength. We report microstructural features detailing the crystallographic texture and grain morphology of as-received -tin from electron back scatter diffraction (EBSD). Temperature and strain rate dependent mechanical behavior was investigated by multiple compression tests at temperatures of 200K to 400K and strain rates of 0.0001 /s to 100 /s. Tri-lab tin showed significant temperature and strain rate dependent strength with no significant plastic anisotropy. A sample to sample material variation was observed from duplicate compression tests and texture measurements. Compression data was used to calibrate model parameters for temperature and rate dependent strength models, Johnson-Cook (JC), Zerilli-Armstrong (ZA) and Preston-Tonks-Wallace (PTW) strength models.

36 MATERIALS SCIENCE↗
DOE OSTI2026

3⁢𝑄 magnetic order with spatially alternating spin scalar chirality in overdoped C⁢o 0.336⁢ Ta⁢S 2

C⁢o 𝑥 ⁢Ta⁢S 2 (𝑥≈1/3) exhibits a spontaneous Hall effect from spin texture in antiferromagnets, with a tetrahedral triple-Q (3Q) order and uniform spin scalar chirality. Upon Co overdoping (𝑥>1/3), it undergoes a shift in magnetic ordering vectors from 𝐐 m =(1/2, 0, 0) to (1/3, 0, 0). Interestingly, the spontaneous Hall effect disappeared in the overdoped regime, which was originally attributed to the loss of 3Q order. However, a question remains whether a new type of 3Q order can exist with alternating chirality in the overdoped regime. To address this, we investigated C⁢o 0.336⁢ Ta⁢S 2 using inelastic neutron scattering (INS), neutron diffraction, and optical dichroism, and found that INS data and spin-wave simulations support a 3Q order with alternating chirality. Moreover, neutron diffraction data show field-independent Bragg peaks, while linear dichroism detects no in-plane anisotropy, consistent with threefold rotation symmetry. Our data support the scenario of an alternating-chirality 3Q order in C⁢o 0.336 ⁢Ta⁢S 2 , canceling the spontaneous Hall effect. Furthermore, this study highlights a combined neutron-optical approach to identify complex spin textures.

Landau-Lifschitz-Gilbert equation↗
DOE OSTI2022

Discretized evolution of solitons in the achiral stripe phase of a Fe/Gd thin film

Understanding magnetic phase transitions from stripe to skyrmion textures provide fundamental scientific insights into the details of the intermediate topologies through which the system evolves. The solitonic nature of spin texture in both stripe and skyrmion phases has been observed in materials with Dzyaloshinskii-Moriya interaction. In this study we show that the field evolution in a dipolar interaction mediated Fe/Gd multilayer that exhibits achiral stripe textures behaves similar to a finite-sized chiral soliton lattice. As a function of magnetic field, the stripes exhibit discrete jumps in periodicity indicative of intermediate topologies as the stripes get wound into skyrmions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Schmid factor crack propagation and tracking crystallographic texture markers of microstructural condition in direct energy deposition additive manufacturing of Ti-6Al-4V

Metallic additive manufacturing (AM) provides a customizable and tailorable manufacturing process for new engineering designs and technologies. The greatest challenge currently facing metallic AM is maintaining control of microstructural evolution during solidification and any solid state phase transformations during the build process. Ti-6Al-4V has been extensively surveyed in this regard, with the potential solid state and solidification microstructures explored at length. In this study, we evaluate the applicability of previously determined crystallo- graphic markers of microstructural condition observed in electron beam melting powder bed fusion (PBF-EB) builds of Ti-6Al-4V in a directed energy deposition (DED) build process. The aim of this effort is to elucidate whether or not these specific crystallographic textures are useful tools for indicating microstructural conditions in AM variants beyond PBF-EB. Parent β-Ti grain size was determined to be directly related to α-Ti textures in the DED build process, and the solid state microstructural condition could be inferred from the intensity of specific α-Ti orientations. Qualitative trends on the as-solidified β-Ti grain size were also determined to be related to the presence of a fiber texture, and proposed as a marker for as-solidified grain size in any cubic metal melted by AM. Analysis of the DED Ti-6Al-4V build also demonstrated a near complete fracture of the build volume, suspected to originate from accumulated thermal stresses in the solid state. Crack propagation was found to only appreciably occur in regions of slow cooling with large α +β colonies. Schmid factors for the basal and prismatic α-Ti systems explained the observed crack pathway, including slower bifurcation in colonies with lower Schmid factors of both slip systems. Colony morphologies and localized equiaxed β-Ti solidification were also found to originate from build pauses during production and uneven heating of the build edges during deposition. Tailoring of DED Ti-6Al-4V microstructures with the insight gained here is proposed, along with cautionary insight on preventing unplanned build pauses to maintain an informed and controlled thermal environment for microstructural control.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Engineering Relaxor Behavior in (BaTiO 3 ) n /(SrTiO 3 ) n Superlattices

Complex-oxide superlattices provide a pathway to numerous emergent phenomena because of the juxtaposition of disparate properties and the strong interfacial interactions in these unit-cell-precise structures. This is particularly true in superlattices of ferroelectric and dielectric materials, wherein new forms of ferroelectricity, exotic dipolar textures, and distinctive domain structures can be produced. Here, in this study, relaxor-like behavior, typically associated with the chemical inhomogeneity and complexity of solid solutions, is observed in (BaTiO 3 ) n /(SrTiO 3 ) n (n = 4–20 unit cells) superlattices. Dielectric studies and subsequent Vogel–Fulcher analysis show significant frequency dispersion of the dielectric maximum across a range of periodicities, with enhanced dielectric constant and more robust relaxor behavior for smaller period n. Bond-valence molecular-dynamics simulations predict the relaxor-like behavior observed experimentally, and interpretations of the polar patterns via 2D discrete-wavelet transforms in shorter-period superlattices suggest that the relaxor behavior arises from shape variations of the dipolar configurations, in contrast to frozen antipolar stripe domains in longer-period superlattices (n = 16). Moreover, the size and shape of the dipolar configurations are tuned by superlattice periodicity, thus providing a definitive design strategy to use superlattice layering to create relaxor-like behavior which may expand the ability to control desired properties in these complex systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Texture Analysis of Inconel 718 with Different Modes During Single-Track Laser Surface Re-Melting

An in-depth understanding of the texture formation in melt pools allows for the modification of the surface layer microstructure and corresponding material properties, providing an opportunity to integrate laser surface re-melting into metal additive manufacturing. This study investigates crystallographic texture formation at different cooling rates in single melting tracks on the Inconel 718 (IN718) plate produced by laser surface re-melting. The cooling rate varies from 2.31 × 10 5 °C/s to 9.56 × 10 5 °C/s with the increase in scanning rates from 400 mm/s to 1200 mm/s, measured by recently developed real-time temperature monitoring of melt pools. Columnar grains are dominant, with distinct crystallographic textures forming in the melt pools. At a slower scanning speed, the keyhole mode shows three different textures forming at different depths (crystallographically layered structure), while, at a faster scanning speed, the conduction mode shows only random grain orientation. There are no pores/voids detected, and the columnar grain morphology and columnar grain width (8.6 μm to 12.4 μm) follow the analysis framework in terms of thermal gradient and solidification rate analysis. This implies that laser surface re-melting provides the potential to modify the surface structure from a random grain orientation to a crystallographically layered structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anomalous Hall effect in conical helimagnetic crystals

Spin-spiral texture can substantially change charge transport properties in helimagnets. Here we find the anomalous Hall effect (AHE) exhibiting the dramatic behavior with respect to chemical potential μ in conical magnetic structures. The direct conductivity demonstrates kinks, and the anomalous Hall current exhibits minima and maxima changing the sign. We analytically derive the expression for energy bands and eigenstates in the most general case. Because of the conical potential, the energy bands are split into two nonparabolic bands where the lower band can have one- or two-minima shapes in the k z direction ($\hat{z}$ is a direction of the spiral axis). We prove that the origin of the anomalous Hall effect is not topological and is due to the interplay between the asymmetry of energy bands in the x and z directions and spin restrictions in the phase space due to the conical potential. We also investigate the dependence of transport properties on cone half- angle θ, and find that the effects are most pronounced at θ=π/2 (a helical state). Electric current is calculated using the Boltzmann equation where the relaxation is caused by electron-acoustic phonon interaction. The transition probability is found to be a 2×2 matrix with nonvanishing off-diagonal elements indicating the strong interband transitions. The origin of interband transitions is because of the nature of the conical potential where conduction electron spins interact with localized magnetic moments. To verify the proposed theory, we calculate the temperature dependence of resistivity for MnSi crystals and find the discontinuity at the phase transition between conical and paramagnetic phases. The calculations are in the excellent agreement with the experimental data. In addition, we predict the discontinuity behavior for the anomalous Hall resistivity at the phase transition where the resistivity exhibits the abrupt change at T=T C , (a) to zero if the relativistic effects for the conduction electrons are small or (b) to a nonzero value if Rashba/Dresselhaus effects are taken into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Understanding Uncertainty in Microstructure Evolution and Constitutive Properties in Additive Process Modeling

Coupled process–microstructure–property modeling, and understanding the sources of uncertainty and their propagation toward error in part property prediction, are key steps toward full utilization of additive manufacturing (AM) for predictable quality part development. The OpenFOAM model for process conditions, the ExaCA model for as-solidified grain structure, and the ExaConstit model for constitutive mechanical properties are used as part of the ExaAM modeling framework to examine a few of the various sources of uncertainty in the modeling workflow. In addition to “random” uncertainty (due to random number generation in the orientations and locations of grains present), the heterogeneous nucleation density N 0 and the mean substrate grain spacing S 0 are varied to examine their impact of grain area development as a function of build height in the simulated microstructure. While mean grain area after 1 mm of build is found to be sensitive to N 0 and S 0 , particularly at small N 0 and large S 0 (despite some convergence toward similar values), the resulting grain shapes and overall textures develop in a reasonably similar manner. As a result of these similar textures, ExaConstit simulation using ExaCA representative volume elements (RVEs) from various permutations of N 0 , S 0 , and location within the build resulted in similar yield stress, stress–strain curve shape, and stress triaxiality distributions. It is concluded that for this particular material and scan pattern, 15 layers is sufficient for ExaCA texture and ExaConstit predicted properties to become relatively independent of additional layer simulation, provided that reasonable estimates for N 0 and S 0 are used. However, additional layers of ExaCA will need to be run to obtain mean grain areas independent of build height and baseplate structure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of grain structure and strain rate on dynamic recrystallization and deformation behavior: A phase field-crystal plasticity model

Herein, a phase field (PF)-crystal plasticity (CP) model has been developed to study the effects of initial grain structures, recrystallized grain orientation, and strain rates on dynamic recrystallization and deformation behavior under stress states typical of the Shear Assisted Processing and Extrusion (ShAPE) process. The model takes the geometrically necessary dislocation density as the nucleation criterion for recrystallization and minimizes the deformation energy as the driving force of recrystallized grain growth. Using this model, the effects of grain orientations and strain rates on dynamic recrystallization and deformation behavior were simulated. The results demonstrate that (1) a polycrystalline structure with the texture observed in ShAPE process has the lowest yield stress under the ShAPE stress conditions, (2) the recrystallized grains with the texture observed in ShAPE process largely soften the materials, and (3) higher shear strain rate or rotation speed results in larger magnitude of material softening.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Single domain spectroscopic signatures of a magnetic kagome metal

Magnetic kagome metals host complex electronic states and real-space magnetic textures, but their small and temperature-dependent magnetic domains make experimental access difficult. Here we show that micro-focused circular-dichroic photoemission spectroscopy enables spectroscopic access to individual magnetic domains in the kagome metal DyMn 6 Sn 6 at low temperature. By tuning to element-specific electronic states, we image domain contrast associated with Dy 4f levels and detect corresponding signatures from Mn core states. The energy dependence of the dichroic response is consistent with modeling and indicates ferrimagnetic alignment between Dy and Mn local moments. Measurements of Mn 3d-derived valence bands, supported by first-principles calculations, reveal features related to orbital magnetization. These results establish element- and orbital-resolved spectroscopy of single magnetic domains and enable studies of magnetic textures and electronic structure in complex magnetic quantum materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Multi-physics modeling of grain growth during solidification in electron beam additive manufacturing of Inconel 718

While experimental work has shown promising results regarding control of additive manufacturing metal grain structure, the effects of processing parameters on the grain structure is difficult to understand and predict from experiment alone. To this end, a modeling framework is developed which sequentially couples a macro-scale, semi-analytic thermal model, and a meso-scale, cellular automata-based microstructure model. This framework is applied to electron beam additive manufacturing of Inconel 718 using a complex spot scan pattern. The model shows that, with the same scan pattern, variations in the spot time and electron-beam current produce thermal histories with significant spatial and temporal differences, which then produce complex solidification conditions from the interplay between molten pools in the same layer and subsequent layers, resulting in vastly different grain structures. Additionally, it is noted that the framework can significantly reduce the computational expenses for coupled thermal-metallurgical problems, and has the potential to be used for component level problems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Robust cycloid crossover driven by anisotropy in the skyrmion host GaV 4 S 8

We report on the anomalous magnetization dynamics of the cycloidally modulated spin textures under the influence of uniaxial anisotropy in multiferroic GaV 4 S 8 . The temperature and field dependence of the linear ac susceptibility [$χ'_{1ω}$ (T, H)], AC magnetic loss [$χ''_{1ω}$ (T, H)], and nonlinear AC magnetic response [$M_{3ω}$ (T, H)] are examined across the magnetic phase diagram in the frequency range f = 10 - 10 000 Hz. According to recent theory, skyrmion vortices under axial crystal symmetry are confined along specific orientations, resulting in enhanced robustness against oblique magnetic fields and altered spin dynamics. We characterize the magnetic response of each spin texture and find that the dynamic rigidity of the Néel skyrmion lattice appears enhanced compared to Bloch-type skyrmions in cubic systems, even in the multidomain state. Anomalous M 3 ω and strong dissipation emerge over the same phase regime where strong variations in the cycloid pitch were observed on lowering temperature in recent small-angle neutron-scattering experiments [White et al., Phys. Rev. B 97, 020401(R) (2018)]. Here, we show that strong anisotropy also drives an extended crossover of the zero-field cycloid texture in GaV 4 S 8 . The frequency dependence of these dynamic signatures is consistent with that of a robust anharmonic spin texture exhibiting a correlated domain arrangement. The results underpin the essential role of magnetic anisotropy in enhancing the rigidity of topological spin textures for diverse applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗