SEARCH · Engineering Papers

Results for “sulfide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Theoretical Study of the First Transition Row Oxides and Sulfides

The first transition row oxides and sulfides are studied using several different levels of theory. The calculations show the bonding mechanism in the sulfides and oxides to be very similar. For the oxides, accurate experimental data allow the theoretical methods to be calibrated. The same level of theory is used to study the sulfides where there is far less experimental information. For ScO through MnO and CuO the coupled cluster singles and doubles technique including a perturbational estimate of the unliked triple excitations [CCSD(T)] yields spectroscopic constants ((tau)e, (omega)e, and D0) in good agreement with experiment. The triple excitations are found to be very important in achieving this accuracy. For FeO to NiO, the single determinant self-consistent-field (SCF) approach yields pi orbitals that are localized on the metal or oxygen. This appears to cause problems for the single reference techniques; this is discussed in detail for NiO. The complete-active-space SCF/internally contracted averaged coupled pair functional approach (CASSCF/ICACPF) works well for FeO to NiO. The calculation of accurate dipole moments is found to be very difficult.

Bauschlicher, Charles W., Jt.↗

NASA NTRS2004

Sulfide Stability of Planetary Basalts

The isotopic system, 187Re 187Os, can be used to determine the role of crust and mantle in magma genesis. In order to apply the system to natural samples, we must understand variations in Re/Os concentrations. It is thought that low [Os] and [Re] in basalts can be attributed to sulfide (FeS) saturation, as Re behaves incompatibly to high degrees of evolution until sulfide saturation occurs [1]. Previous work has shown that lunar basalts are sulfide under-saturated, and mid-ocean ridge, ocean-island and Martian (shergottites) basalts are saturated [2,3]. However, little is known about arc basalts. In this study, basaltic rocks were analyzed across the Trans-Mexican Volcanic Belt.

Caiazza, C. M.↗

NASA NTRS1988

Sulfur isotope effects associated with oxidation of sulfide by O2 in aqueous solution

Normal sulfur isotope effects averaging epsilon = -5.2 +/- 1.4% (s.d.) were consistently observed for the oxidation of sulfide in aqueous solution. Reaction products were sulfate, thiosulfate and sulfite at pH 10.8-11 in distilled water; S0 was formed in two experiments with synthetic seawater at pH 8-9.5. Because the -5.2% normal isotope effect differs significantly from the previously measured +2% inverse effect associated with anaerobic oxidation of sulfide by photosynthetic bacteria, stable sulfur isotopic measurements are potentially useful for distinguishing aerobic vs. anaerobic sulfide oxidation in marine and freshwater sulfureta.

NASA Program Exobiology↗

NASA NTRS1980

Method of epitaxially depositing cadmium sulfide

A single crystal layer of either cadmium sulfide or an alloy of cadmium sulfide and indium phosphide is epitaxially deposited on a substrate of cadmium sulfide by liquid phase epitaxy using indium as the solvent.

Hawrylo, Frank Z.↗

NASA NTRS2006

Formation of "Chemically Pure" Magnetite from Mg-Fe-Carbonates Implications for the Exclusively Inorganic Origin of Magnetite and Sulfides in Martian Meteorite ALH84001

Magnetite and sulfides in the black rims of carbonate globules in Martian meteorite ALH84001 have been studied extensively because of the claim by McKay et al. that they are biogenic in origin. However, exclusively inorganic (abiotic) processes are able to account for the occurrence of carbonate-sulfide-magnetite assemblages in the meteorite. We have previously precipitated chemically zoned and sulfide-bearing carbonate globules analogous to those in ALH84001 (at less than or equal to 150 C) from multiple fluxes of variable-composition Ca-Mg-Fe-CO2-S-H2O solutions. Brief heating of precipitated globules to approx. 470 C produced magnetite and pyrrhotite within the globules by thermal decomposition of siderite and pyrite, respectively. We have also shown that morphology of magnetite formed by inorganic thermal decomposition of Fe-rich carbonate is similar to the morphology of so-called biogenic magnetite in the carbonate globules of ALH84001. Magnetite crystals in the rims of carbonate globules in ALH84001 are chemically pure [Note: "Chemically pure" is defined here as magnetite with Mg at levels comparable or lower than Mg detected by [8] in ALH84001 magnetite]. A debate continues on whether or not chemically pure magnetite can form by the thermal decomposition of mixed Mg-Fe-carbonates that have formed under abiotic conditions. Thomas-Keprta et al. argue that it is not possible to form Mg-free magnetite from Mg-Fe-carbonate based on thermodynamic data. We previously suggested that chemically pure magnetite could form by the thermal decomposition of relatively pure siderite in the outer rims of the globules. Mg-Fe-carbonates may also thermally decompose under conditions conducive for formation of chemically pure magnetite. In this paper we show through laboratory experiments that chemically pure magnetite can form by an inorganic process from mixed Mg-Fe-carbonates.

Golden, D. C.↗

NASA NTRS2023

Temperature Effect on Silicate Melt-Sulfide-Metal Trace Element Partitioning in the Presence of Sulfur Under Reduced Conditions

The reduced nature of Mercury, enstatite chondrites, and the aubrite parent bodies (APB) have raised many questions regarding the geochemical behavior of typically lithophile, heat-producing, and rare-earth elements (REE) in magmas at low oxygen fugacity (fO2). Due to decreasing O availability at these low fO2, and an abundance of S(sup 2(-)), sulfur (S) acts as an important anion that changes the partitioning behavior of many elements and modifies the physical properties of silicate melts. Preliminary observations suggest that major and minor elements exhibit different geochemical affinities in highly reduced, S-rich systems compared to terrestrial rocks. The speciation and bonding environment of S, dictated by P/T/fO2 conditions, may strongly influence the degree to which S affects partitioning behavior. Here we investigate the partitioning behavior of major, minor, and trace elements between silicate melt, sulfide melt, and metal as well as the coordination chemistry of S in highly reduced silicate melts. Our work is focused on investigating solely the entropy-dependent temperature effect on partitioning of elements for which we currently have MESSENGER data (K, Na, Th, U, Si, Mg, Fe, Ti, Ca, Al, Cr, Mn, S, Cl) as well as a host of geochemically relevant trace elements such as REEs (P, Co, Ni, Mo, Ce, Nd, Sm, Eu, Gd, Dy, Yb). Previous studies in which temperature, pressure, and fO2 were co-varied found that as fO2 decreases, heat-producing elements U and Th become more chalcophile, while K becomes less chalcophile. Concurrently, nominally lithophile elements Mg and Ca become more chalcophile and were observed as minor elements in exsolved sulfides and bonded with S species in silicate melt. These studies, however, could not disentangle entropic effects from changes in the fO2. New temperature-dependent partitioning data from our work will be used to determine which elements are most likely to retain their lithophile character and hence be incorporated into silicates, and which elements are likely contained within the sulfide (chalcophile) and metal core (siderophile), setting the stage for the thermal and magmatic evolution of reduced planetary bodies.

B A Anzures↗

DOE OSTI2020

Encapsulated sulfide glass solid electrolytes and solid-state laminate electrode assemblies

Nanofilm-encapsulated sulfide glass solid electrolyte structures and methods for making the encapsulated glass structures involve a lithium ion conducting sulfide glass sheet encapsulated on its opposing major surfaces by a continuous and conformal nanofilm made by atomic layer deposition (ALD). During manufacture, the reactive surfaces of the sulfide glass sheet are protected from deleterious reaction with ambient moisture, and the nanofilm can be configured to provide additional performance advantages, including enhanced mechanical strength and improved chemical resistance.

Visco, Steven J.↗

DOE OSTI2022

Encapsulated sulfide glass solid electrolytes and solid-state laminate electrode assemblies

Visco, Steven J.↗

DOE OSTI2022

Wet chemical synthesis and properties of argyrodite sulfide solid electrolytes for solid state lithium batteries

The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the flammable liquid electrolytes used in today’s batteries. Battery safety can best be achieved by adopting solid electrolytes in place of liquid electrolytes. Solid electrolytes are nonvolatile and nonflammable, safely allowing for the combination of high-capacity cathode materials with a Li metal anode. Argyrodite sulfide solid electrolytes such as halogen-doped Li6PS5X (X = Cl, Br, I) are noted for their high ionic conductivity. But before sulfides can be commercially adopted, they possess several disadvantages which must be addressed, including time- and energy-consuming synthesis processes, poor electrochemical stability, and intrinsically poor air stability. This dissertation seeks to address each of these challenges through materials design an synthesis strategies. In this work, we pioneer a solvent-based approach for the synthesis of argyrodite solid electrolytes Li7PS6 and Li6PS5Xinstead of a stringent solid-state synthesis. Nontoxic ethanol is employed as the solvent, enabling a rapid synthetic approach to produce argyrodite solid electrolytes with high phase purity and compositional flexibility. Compared with Li7PS6, halogen doping (i.e. X = F, Cl, Br, I) not only increases the ionic conductivity, but also enhances the electrochemical stability at the interface towards Li metal. Specifically, F-doped argyrodites produce a robust SEI layer containing LiF, contributing to enhanced interfacial stability. Finally, to address the air instability challenge, argyrodite-incorporated composite solid electrolytes (CSEs) are designed and prepared to produce stable and flexible membranes that are demonstrated in solid-state Li metal batteries. These advances push argyrodite sulfide solid electrolyte research further and pave the way for the proliferation of next generation lithium metal batteries.

25 ENERGY STORAGE↗

DOE OSTI2021

Zeolite-Stabilized Di- and Tetranuclear Molybdenum Sulfide Clusters Form Stable Catalytic Hydrogenation Sites

Supercages of faujasite (FAU)-type zeolites serve as a robust scaffold for stabilizing dinuclear (Mo 2 S 4 ) and tetranuclear (Mo 4 S 4 ) molybdenum sulfide clusters. The FAU-encaged Mo 4 S 4 clusters have a distorted cubane structure similar to the FeMo-cofactor in nitrogenase. Both clusters possess one unpaired electron per Mo atom. Additionally, they show identical catalytic activity per sulfide cluster. Their catalytic activity is stable (> 150 h) for ethene hydrogenation, while layered MoS 2 structures deactivate significantly under the same reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Synthesis of model sodium sulfide films

We report the direct deposition of model sodium sulfide films by RF magnetron sputtering from Na 2 S and Na 2 S 2 deposition targets. Analytical characterization and electrochemical cycling indicate that the deposited films are amorphous with stoichiometries that correspond to Na 2 S 3 and Na 2 S 2 formed from the Na 2 S and Na 2 S 2 targets, respectively. We propose that the loss of Na in the case of the Na 2 S target is due to preferential sputtering of Na resulting from the higher energy required to break the Na–S bonds in Na 2 S. Here, the development of thin film sodium sulfides opens a new route to understanding their fundamental properties, such as Na + transport, conductivity, and reactivity.

preferential sputtering↗

DOE OSTI2022

Practically Accessible All-Solid-State Batteries Enabled by Organosulfide Cathodes and Sulfide Electrolytes

The combination of organic electrode materials and sulfide electrolytes is expected to enable the development of all-solid-state organic batteries featuring high energy density and long-term sustainability. In this work, thiuram hexasulfide is reported as a low-cost and high-capacity organic cathode for solid-state batteries based on sulfide electrolytes, delivering a capacity of ~600 mAh g -1 and retaining 80.8 % capacity after 500 cycles. An electrochemically reversible change of the cathode interface was revealed upon cycling. Full cell displays an oscillating stress change up to 0.6 MPa during cycling, predominated by the anode side. The energy density is 1140 Wh kg -1 at the material level and 376 Wh kg -1 at the electrode level, which are among the best-reported organic cathodes to date. A high areal capacity of 10.4 mAh cm -2 is reached with a high mass loading cathode. A dry-film approach is further explored to manufacture sheet-type cells. Free-standing electrolyte film is merely ~48 μm thick and demonstrates an ultralow areal resistance of 3.9 Ω cm 2 , significantly boosts the cell-level energy density and reduces the cell internal resistance.

25 ENERGY STORAGE↗

DOE OSTI2021

Amphipathic Binder Integrating Ultrathin and Highly Ion-Conductive Sulfide Membrane for Cell-Level High-Energy-Density All-Solid-State Batteries

Current sulfide solid-state electrolyte (SE) membranes utilized in all-solid-state lithium batteries (ASLBs) have a high thickness (0.5–1.0 mm) and low ion conductance (<25 mS), which limit the cell-level energy and power densities. Therefore, based on ethyl cellulose's unique amphipathic molecular structure, superior thermal stability, and excellent binding capability, this work fabricates a freestanding SE membrane with an ultralow thickness of 47 µm. With ethyl cellulose as an effective disperser and a binder, the Li 6 PS 5 Cl is uniformly dispersed in toluene and possesses superior film formability. In addition, an ultralow areal resistance of 4.32 Ω cm -2 and a remarkable ion conductance of 291 mS (one order higher than the state-of-the-art sulfide SE membrane) are achieved. The ASLBs assembled with this SE membrane deliver cell-level high gravimetric and volumetric energy densities of 175 Wh kg -1 and 675 Wh L -1 , individually.

25 ENERGY STORAGE↗

DOE OSTI2022

Surface energetics of wurtzite and sphalerite polymorphs of zinc sulfide and implications for their formation in nature

Surface energetics of zinc sulfide nanoparticles determines their structure, properties, and occurrence. Using a combination of experimental techniques, we investigated the thermodynamics of the two polymorphs, sphalerite and wurtzite at bulk and nanoscale to understand their occurrence. Calorimetric measurements confirmed that wurtzite has a lower surface energy than sphalerite, which causes a reversal in phase stability at the nanoscale, with wurtzite energetically stable for particle size below 10 nm. Taking these surface energies into account, a simple model of the thermodynamics of the sphalerite - wurtzite transformation as a function of particle size and temperature can explain the occurrence of the zinc sulfide polymorphs in environments as diverse as ore bodies and planetary atmospheres.

58 GEOSCIENCES↗

DOE OSTI2022

Sulfides mediate the migration of nanoparticle mass out of nanocomposite plastics and into aqueous environments

We show that inorganic sulfides strongly influence transfer (migration) of nanoparticle mass out of polymer nanocomposites (PNCs) and into aqueous environments. We first manufactured two families of PNCs: one incorporating silver nanoparticles (AgNPs) and one incorporating CdSe quantum dots (QDs). Then, we assessed migration out of these PNCs and into aqueous media containing Na 2 S at concentrations ranging from 0 to 10 -4 M. Results show that Na 2 S strongly suppressed migration of Ag from AgNP-based PNCs: the migration into water spiked with 10 -6 M Na 2 S was 79% less than migration into water without Na 2 S, and no migration was detected (LOD ≈ 0.01 ng/cm 2 ) in water spiked with Na 2 S at 10 -5 M or 10 -4 M. With CdSe QD-based PNCs, Na 2 S suppressed Cd migration but enhanced Se migration, resulting in only a small net effect on the total QD migration but a large shift of the leachate composition (from favoring Cd by an average of 5.8 to 1 in pure water to favoring Se 9.4 to 1 when Na 2 S was present at 10 -4 M). These results show that common inorganic substances like sulfides may play a strong role in determining the environmental fate of polymer-dispersed nanoparticles and imply that migration tests conducted in purified water may not always accurately reflect migration into real environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells

Optically transparent p-type materials play a critical role in transparent electronics including photovoltaic (PV) devices. P-type sulfide materials offer an alternative to oxides for PV application due to improved hole transport properties. Here, we report the solution-based synthesis of earth-abundant p-type transparent conducting barium copper sulfide (α-BaCu 4 S 3 , BCS) thin films. These films were characterized using scanning electron microscopy, X-ray diffraction, UV–Vis–NIR spectrophotometry, Raman spectroscopy, and spectroscopic ellipsometry. BCS films of ~100 nm thickness transmit >70% of visible light. We report on tests of the hole transport properties of these BCS films for cadmium telluride (CdTe) photovoltaics, finding that the BCS deposition process forms a beneficial tellurium (Te) rich surface on CdTe by selectively removing Cd from the surface. Based on our study, the BCS interface layer plays dual functions for CdTe PV devices as a hole transport material and as an etchant, enhancing the resulting device performance. We observed a significant increase in open-circuit voltage of CdTe solar cells with the BCS buffer layer. Furthermore, we discuss semitransparent CdTe solar cells with BCS as a hole transport layer and indium tin oxide as a finishing electrode. Semitransparent CdTe solar cells shows 13.3% conversion efficiency for the front side illumination and 1.2% efficiency for back side illumination, indicating high recombination of charge carriers generated close to the rear CdTe/BCS/ITO contact.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Mechanistic Similarities and Differences for Hydrogenation of Aromatic Heterocycles and Aliphatic Carbonyls on Sulfided Ru Nanoparticles

This study establishes the contrasting reactivity trends for the hydrogenation of aromatic hydrocarbons (AHCs = C n H m X, X = N, S, O, and C) and aliphatic carbonyls [R a C(O)R b ; R a = alkyl group, R b = CH 3 or H] on sulfided Ru clusters arising from the difference in the elementary proton and hydride attack catalytic sequence. Both reactions require sequential additions of a proton from either Ru n+ –(SH 2 ) or S 2 –(H δ+ ) species and a hydride from Ru n+ –(H δ– ) species to the unsaturated C=X bonds. For the five-membered-ring aromatic heterocycles (AHCs = pyrrole, thiophene, and furan), an initial proton addition limits the catalytic turnovers; thus, their hydrogenation reactivity increases with increasing gas-phase proton affinities of the AHCs. Pyridine as the more basic six-membered N-AHC is more susceptible to protonation; therefore, it is more reactive, and its initial proton addition is quasi-equilibrated, followed by the kinetically relevant hydride addition. Conversely, aliphatic carbonyls prefer to undergo hydrogen additions in a reverse sequence, where a Ru n+ –(H δ– ) hydride initially attacks the electron-deficient carbonyl C atom as the kinetically relevant step before a subsequent rapid S 2 –(H δ+ ) proton addition on the electron-rich O atom, as confirmed by isotopic exchange studies with butanal-D 2 and 1-butanol-D 2 mixtures and density functional theory calculations on S-deficient RuS 2 (100) surfaces. For these reasons, their hydrogenation reactivity increases with increasing gas-phase hydride affinities of the carbonyls. On metallic Ru surfaces without sulfur, hydrogen adatoms (H*) are the only reactive hydrogen species; the reactivity of their attack on aromatic heterocycles increases with increasing reactant proton affinities much more sensitively than that on sulfided Ru surfaces. This work illustrates the distinct catalytic roles of the diverse hydrogen species in hydrogenation—the interplay between proton and hydride additions has marked catalytic consequences in shaping the free energy landscape of the reactions, which in turn leads to the observed kinetic dependences, kinetic parameters, reactivity trends, and scaling relations between the measured barriers and the appropriate kinetic descriptors, that is, proton affinity of AHCs and hydride affinity of carbonyls in hydrogenation catalysis. Here, these mechanistic similarities and differences provide explanations of the observed reactivity trends and thus have profound implications for industrial hydrogenation and hydrotreating catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Nickel Sulfide-Nanowire-Filled Carbon Nanotubes as an Efficient Overall Water Splitting Electrocatalyst

Pursuing stable, efficient, and cost-effective nanostructured bifunctional electrocatalysts is crucial for advancing the electrochemical water splitting process and enabling clean hydrogen energy production. In recent years, considerable efforts have focused on developing highly efficient and durable commercial electrocatalysts for the oxygen evolution reaction (OER) and overall water splitting (OWS). This research introduces an OWS electrocatalyst-nickel sulfide-filled carbon nanotubes grown on a carbon cloth substrate (Ni 3 S 2 @CNTs/CC), synthesized via a one-step in-situ process. The synergistic integration of metal sulfide (Ni 3 S 2 ) and carbon nanotubes provides abundant active sites for catalytic reactions, ensuring a robust composite nanostructure with enhanced durability. Furthermore, the electrocatalytic performance for OER and OWS has been significantly improved by a simple acid treatment to the electrocatalysts, which introduces physical and chemical defects, particularly oxygen functional groups (the acid-treated sample is termed as Ni 3 S 2 @CNTs/CC-AT). As OER electrocatalysts, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT present overpotentials of 304 and 200 mV, respectively, for achieving a current density of 10 mA/cm 2 in the OER process. Furthermore, for complete water splitting in 1.0 M KOH electrolyte, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT exhibit potentials of 1.63 and 1.44 V, respectively, to achieve a current density of 10 mA/cm 2 when employed as both anode and cathode. Moreover, Ni 3 S 2 @CNTs/CC and Ni 3 S 2 @CNTs/CC-AT demonstrate durable nature for 22 and 20 h durability in the OER and OWS processes, respectively, offering a promising alternative to ruthenium- and iridium-based electrocatalysts for electrochemical hydrogen production through water splitting. In conclusion, the in-situ synthesis method and acid treatment strategy described in this research are promising approaches to fabricating high-performance encapsulated carbon-nanotube-based electrocatalysts.

36 MATERIALS SCIENCE↗