SEARCH · Engineering Papers

Results for “structural rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Thin film strain transducer

A strain transducer system and process for making same is disclosed wherein a beryllium-copper ring having four strain gages disposed thereon is electrically connected in Wheatstone bridge fashion to output instrumentation. Tabs are bonded to a balloon or like surface with strain on the surface causing bending of the ring and providing an electrical signal through the gages proportional to the surface strain. A figure is provided which illustrates a pattern of a one-half ring segment as placed on a sheet of beryllium-copper for chem-mill etch formation, prior to bending and welding of a pair of the segments to form a ring structure.

Rand, J. L.↗

NASA NTRS1985

A Gimbal sizing analysis for an IPACS rotating assembly

All major components of an integrated power/attitude control system (IPACS) assembly were analyzed for testing, launch, and operational stresses. The conceptual design for the outer gimbal and mounting ring structures were developed and analyzed along with preliminary designs of the pivot and torquer assemblies. Results from the system response analysis and the thermal analysis are also presented. Gimballing of this rotating assembly should present few difficulties as the maximum gimballing rate is quite low. However, the inner gimbal assembly in its current configuration must be modified to develop the system from a laboratory concept to a realistic flight hardware status.

Burke, P. R.↗

NASA NTRS1984

Evidence for material between Saturn's A and F rings from the Voyager 2 photopolarimeter experiment

The region in the Saturn system between the F ring and the outer edge of the A ring is an area that appears, in images from the imaging experiment, to be virtually devoid of material except for three small satellites. Near the orbit of 1980S28, Atlas - the innermost satellite - the Voyager Photopolarimeter Stellar Occultation data show a discontinuity in count rate which marks a boundary between the tenuous material near the outer edge of the A ring and the orbit of Atlas. The data pertaining to this region have been examined with the aid of statistics and models generated from other similar ring structures. It is concluded that the discontinuity is real, implying the existence of tenuous material of normal optical depth of 0.01 to 0.006 in this region.

Graps, A. L.↗

NASA NTRS1986

An experimental study of plasma grain interactions

Dust grains occur throughout the universe in many systems such as protostellar dust clouds, planetary ring structures and in a near earth environment as the result of man's activities. These grains interact with the local plasma and radiation environment and this interaction certainly influences the evolution of the dust grains. The interaction of bismuth dust particles were studied with a background plasma.

Hazelton, R. C.↗

NASA NTRS1987

Dynamic and thermal response finite element models of multi-body space structural configurations

Presented is structural dynamics modeling of two multibody space structural configurations. The first configuration is a generic space station model of a cylindrical habitation module, two solar array panels, radiator panel, and central connecting tube. The second is a 15-m hoop-column antenna. Discussed is the special joint elimination sequence used for these large finite element models, so that eigenvalues could be extracted. The generic space station model aided test configuration design and analysis/test data correlation. The model consisted of six finite element models, one of each substructure and one of all substructures as a system. Static analysis and tests at the substructure level fine-tuned the finite element models. The 15-m hoop-column antenna is a truss column and structural ring interconnected with tension stabilizing cables. To the cables, pretensioned mesh membrane elements were attached to form four parabolic shaped antennae, one per quadrant. Imposing thermal preloads in the cables and mesh elements produced pretension in the finite element model. Thermal preload variation in the 96 control cables was adjusted to maintain antenna shape within the required tolerance and to give pointing accuracy.

Edighoffer, Harold H.↗

NASA NTRS1986

Lava flows on Mars - Analysis of small surface features and comparisons with terrestrial analogs

High-resolution images of south and west Arsia Mons, eastern Tharsis, and Memnonia Fossae on Mars are analyzed. Lava flows with different types of features, such as pressure ridges, tumuli, festoon ridges, and ring ridges, are observed. The effects of these small features on the type of eruption, mode of flow emplacement, and characteristics of the terrain over which the lavas flow are examined. The development of terrestrial pressure ridges, festoon, and ring structures is discussed and they are compared to the observed Martian features. The interior viscosity of the features are calculated using the Fink and Fletcher (1978) and Fink (1980a) models; the interior viscosity was estimated as 100 MPa sec in flow margins, ponded areas, and across flow lobes. The data reveal that south of Arsia Mons, flows containing pressure ridges are emplaced as multiple flow units from sporadic low-effusion rate eruptions, and the flows at the other three areas are large sheet flows that represent basaltic flood-type volcanism.

Theilig, E.↗

NASA NTRS1990

Modelling high data rate communication network access protocol

Modeling of high data rate communication systems is different from the low data rate systems. Three simulations were built during the development phase of Carrier Sensed Multiple Access/Ring Network (CSMA/RN) modeling. The first was a model using SIMCRIPT based upon the determination and processing of each event at each node. The second simulation was developed in C based upon isolating the distinct object that can be identified as the ring, the message, the node, and the set of critical events. The third model further identified the basic network functionality by creating a single object, the node which includes the set of critical events which occur at the node. The ring structure is implicit in the node structure. This model was also built in C. Each model is discussed and their features compared. It should be stated that the language used was mainly selected by the model developer because of his past familiarity. Further the models were not built with the intent to compare either structure or language but because the complexity of the problem and initial results contained obvious errors, so alternative models were built to isolate, determine, and correct programming and modeling errors. The CSMA/RN protocol is discussed in sufficient detail to understand modeling complexities. Each model is described along with its features and problems. The models are compared and concluding observations and remarks are presented.

Khanna, S.↗

NASA NTRS1989

Development of a class of antennas for space-based Navstar GPS applications

This paper describes the performance of several unique antenna/ground plane configurations currently being developed for the TOPEX satellite and which may also be used for improved ground station operation. These antennas are designed with the objective of achieving nearly hemispherical coverage with sharp pattern cutoff above the horizon together with uniform phase response over the entire coverage area. The most promising of these designs is a uniform choke ring approximately 2 lambda in diameter. The ground planes, when used with the Dorne-Margolin C246 antenna element, produce smooth pattern cutoff of the order of 0.25 dB per deg over 135 deg, excellent LCP rejection, and rms phase deviation of 5-5.7 deg. Other ground plane designs, including larger choke ring structures, slotted ground planes, and the use of absorber material, proved much less effective.

Tranquilla, J. M.↗

NASA NTRS1990

Radar characteristics of the equatorial plains of Venus from Goldstone observations - Implications for interpretation of Magellan data

Based on analyses of recent high resolution observations of the approximately 1000 km diameter Heng-O ring structure by the Goldstone Solar System Radar, it is predicted that the structure is a large corona. Calibrated values of radar backscatter coefficient indicate lateral variations of a factor of 4 in Fresnel reflectivity in the vicinity of Heng-O, as well as in other areas of the plains, at scales of tens of km. It is predicted that areas with very low reflectivity values, which occur in a variety of geological settings, are soil-dominated, with bulk densities as low as 1.5 g/cu cm.

Plaut, Jeffrey J.↗

NASA NTRS1990

The status of cesium beam frequency standards

There has been a lot of progress in cesium beam frequency standards in the last few years some of which will be reported here. Optical pumping is being pursued actively in a number of laboratories. Optically slowed and cooled beams have been demonstrated as well as traps for cold neutral atoms. The microwave cavity performance with regard to local phase shift at the beam holes was improved by use of carefully designed and built ring structures for the cavity ends. Work is being done on improvements in electronics with some emphasis on use of digital circuitry and microprocessors. The frequency pulling due to microwave Delta M = +/- 1 transitions (Ramsey pulling) was analyzed and shown to be important. Status of cesium beam frequency standards in some of the laboratories as well as some of the commercial work is discussed. Optical pumping and detection are discussed.

Cutler, Leonard S.↗

NASA NTRS1990

Linear arrays of InGaAs/InP avalanche photodiodes for 1.0-1.7 micron

Separate absorption and multiplication InGaAs/InP avalanche photodiodes (SAM-APDs) with a floating guard ring structure that is well-suited to array applications have been successfully demonstrated. Individual APDs have breakdown voltages greater than 80 V, multiplications over 40 at 100 nA dark current, and uniform spatial gain profiles. Uniform I-V characteristics and gains have been measured over linear dimensions as large as 1.2 cm. Gains over 10 at low multiplied dark currents were measured on 21 consecutive devices at the wafer level.

Ackley, D. E.↗

NASA NTRS1991

Heavy, overpressured jets and the radio source Hercules A

The flow of jets with pressure and density initially much greater than the medium into which they are injected is investigated. Analytic expressions which describe the cocoon formation and recollimation processes are developed. Under the assumption that the rings seen in high-resolution images of Hercules A are shocks, the western lobe of this source is modeled as a heavy overpressured flow where, about 20 arcsec from the nucleus, the jet suddenly becomes much greater in pressure than the surrounding medium and freely expands. It is argued that jet models which are supersonic with respect to both the internal and external speeds are applicable, and it is found that, in spite of the prominent ring structure in Her A, the flow must be dominated by a smooth conical jet. The Mach disk, bow shock, and the plug in the radio map of the western lobe are tentatively identified as the two outer arcs of emission and the space between them, respectively.

Meier, David L.↗

NASA NTRS1991

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area, Venus - Results from Arecibo image data

Results of new radar images obtained from the Arecibo Observatory for portions of the southern hemisphere of Venus are reported. The images show that the upland of Phoebe Region contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension. Alpha Regio, the only large region of tesserae within the imaged area, is found to be similar to tesserae mapped elsewhere on the planet; it covers a smaller percentage of the surface than that observed in the northern high latitudes. Themis Region is mapped as an ovoid chain of radar-bright arcuate single- and double-ring structures, edifices, and bright lineaments. On the basis of the present analysis, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales, upwelling and extension, and localized compression.

Senske, D. A.↗

NASA NTRS1992

Electrostatic turbulence in the earth's central plasma sheet produced by multiple-ring ion distributions

Attention is given to a mechanism to generate a broad spectrum of electrostatic turbulence in the quiet time central plasma sheet (CPS) plasma. It is shown theoretically that multiple-ring ion distributions can generate short-wavelength (less than about 1), electrostatic turbulence with frequencies less than about kVj, where Vj is the velocity of the jth ring. On the basis of a set of parameters from measurements made in the CPS, it is found that electrostatic turbulence can be generated with wavenumbers in the range of 0.02 and 1.0, with real frequencies in the range of 0 and 10, and with linear growth rates greater than 0.01 over a broad range of angles relative to the magnetic field (5-90 deg). These theoretical results are compared with wave data from ISEE 1 using an ion distribution function exhibiting multiple-ring structures observed at the same time. The theoretical results in the linear regime are found to be consistent with the wave data.

Huba, J. D.↗

NASA NTRS1992

The Galileo Solid-State Imaging experiment

The Galileo Orbiter's Solid-State Imaging (SSI) experiment uses a 1.5-m focal length TV camera with 800 x 800 pixel, virtual-phase CCD detector in order to obtain images of Jupiter and its satellites which possess a combination of sensitivity levels, spatial resolutions, geometric fidelity, and spectral range that are unmatched by earlier imaging data. After describing the performance of this equipment on the basis of ground calibrations, attention is given to the SSI experiment's Jupiter system observation objectives; these encompass atmospheric science, satellite surfaces, ring structure, and 'darkside' experiments.

Belton, Michael J. S.↗

NASA NTRS1993

Special purpose parallel computer architecture for real-time control and simulation in robotic applications

This is a real-time robotic controller and simulator which is a MIMD-SIMD parallel architecture for interfacing with an external host computer and providing a high degree of parallelism in computations for robotic control and simulation. It includes a host processor for receiving instructions from the external host computer and for transmitting answers to the external host computer. There are a plurality of SIMD microprocessors, each SIMD processor being a SIMD parallel processor capable of exploiting fine grain parallelism and further being able to operate asynchronously to form a MIMD architecture. Each SIMD processor comprises a SIMD architecture capable of performing two matrix-vector operations in parallel while fully exploiting parallelism in each operation. There is a system bus connecting the host processor to the plurality of SIMD microprocessors and a common clock providing a continuous sequence of clock pulses. There is also a ring structure interconnecting the plurality of SIMD microprocessors and connected to the clock for providing the clock pulses to the SIMD microprocessors and for providing a path for the flow of data and instructions between the SIMD microprocessors. The host processor includes logic for controlling the RRCS by interpreting instructions sent by the external host computer, decomposing the instructions into a series of computations to be performed by the SIMD microprocessors, using the system bus to distribute associated data among the SIMD microprocessors, and initiating activity of the SIMD microprocessors to perform the computations on the data by procedure call.

Fijany, Amir↗

NASA NTRS1993

Microwave emission from a sunspot. II - The center-to-limb variation

The center-to-limb variation of both the spectral and spatial brightness distributions is investigated using a series of microwave observations of a sunspot in the active region NOAA 4741. Depending on the heliocentric position of the sunspot, the microwave emission appears in two typical profiles: either a ring structure near the center of the disk or a single-peak structure near the limb. Due to the increase of the gyroresonance opacity of the field lines near the spot center as the viewing angle increases, the brightness temperature at high, optically thin frequencies increases slightly as the spot approaches the limb. In addition, a change of effective harmonic, which accompanies a discontinuous change in the degree of polarization, characterizes the center-to-limb variation of the gyroresonance spectrum. Finally, the height of the gyroresonance layer, low in the corona of the active region, is determined from a change of spectrum from gyroresonance to free-free emission as the spot passes over the solar limb.

Lee, Jeongwoo W.↗

NASA NTRS1994

Ozone as a laundry agent on orbit and on the ground

Ozone (03), is the strongest commercial oxidizing agent for aqueous systems and may be ideal for space station laundering operations. It can be generated electronically from air in situ. It kills virtually all microorganisms, attacks many organics and inorganics, and breaks down stable ring structures of benzene and related oils when coupled with ultra violet radiation. It cleans and disinfects in cold water without the need for detergent. It leaves no residues. Ozone permits up to 90% wash water recycling and it eliminates wash time, water volume, and recycling problems of a detergent rinse. Ozone is self purging and converts spontaneously to oxygen. It can be rapidly purged by well established catalytic and thermal processes. Scaling of an ozone laundering system for space station may have commercial applications in a consumer model for home use.

Agosto, William N.↗