Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stream extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Novel Zwitterionic Chromatography to Separate Lithium from Unconventional Resources

Since lithium (Li) is a key element for clean energy technologies, the global lithium demand is anticipated to increase rapidly. As a result, efficient lithium extraction technologies that allow the exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams, are essentially needed to meet the Li demand and keep supply chains stable. However, because of low Li concentration, low ratio of Li/Mg or Li/Ca, and complex feed compositions in these feedstocks, using conventional hydrometallurgy or current Direct Lithium Extraction (DLE) processes are often chemical-intensive, requiring substantial amounts of reagent chemicals to recover Li at scale, resulting in large chemical footprints. Therefore, we developed a novel Zwitterionic Chromatography (ZIC) process to separate Li from these resources. Because Li can be partitioned from divalent salts on ZIC under water elution without using chemicals, exploiting the unconventional resources via a ZIC approach can be environmentally benign and sustainable. In this work, we will present the development of the ZIC process for DLE applications. Simulation studies for the Li separation mechanism in ZIC and the demonstration of a continuous ZIC process to separate Li from domestic inland brine and mining wastewater will be presented. Finally, the chemical and energy footprints of ZIC in comparison to other DLE processes will be discussed.

09 BIOMASS FUELS↗
NASA NTRS1992

On the use of stochastic process-based methods for the analysis of hyperspectral data

Further development in remote sensing technology requires refinement of information system design aspects, i.e., the ability to specify precisely the data to collect and the means to extract increasing amounts of information from the increasingly rich and complex data stream created. One of the principal directions of advance is that data from much larger numbers of spectral bands can be collected, but with significantly increased signal-to-noise ratio. The theory of stochastic or random processes may be applied to the modeling of second-order variations. A multispectral data set with a large number of spectral bands is analyzed using standard pattern recognition techniques. The data were classified using first a single spectral feature, then two, and continuing on with greater and greater numbers of features. Three different classification schemes are used: a standard maximum likelihood Gaussian scheme; the same approach with the mean values of all classes adjusted to be the same; and the use of a minimum distance to means scheme such that mean differences are used.

Landgrebe, David A.↗
DOE OSTI2025

Assessing Heterogeneity of Surface Water Temperature Following Stream Restoration and a High-Intensity Fire from Thermal Imagery

Thermal heterogeneity of rivers is essential to support freshwater biodiversity. Salmon behaviorally thermoregulate by moving from patches of warm water to cold water. When implementing river restoration projects, it is essential to monitor changes in temperature and thermal heterogeneity through time to assess the impacts to a river’s thermal regime. Lightweight sensors that record both thermal infrared (TIR) and multispectral data carried via unoccupied aircraft systems (UASs) present an opportunity to monitor temperature variations at high spatial (<0.5 m) and temporal resolution, facilitating the detection of the small patches of varying temperatures salmon require. Here, we present methods to classify and filter visible wetted area, including a novel procedure to measure canopy cover, and extract and correct radiant surface water temperature to evaluate changes in the variability of stream temperature pre- and post-restoration followed by a high-intensity fire in a section of the river corridor of the South Fork McKenzie River, Oregon. We used a simple linear model to correct the TIR data by imaging a water bath where the temperature increased from 9.5 to 33.4 °C. The resulting model reduced the mean absolute error from 1.62 to 0.35 °C. We applied this correction to TIR-measured temperatures of wetted cells classified using NDWI imagery acquired in the field. We found warmer conditions (+2.6 °C) after restoration (p < 0.001) and median absolute deviation for pre-restoration (0.30) to be less than both that of post-restoration (0.85) and post-fire (0.79) orthomosaics. In addition, there was statistically significant evidence to support the hypothesis of shifts in temperature distributions pre- and post-restoration (KS test 2009 vs. 2019, p < 0.001, D = 0.99; KS test 2019 vs. 2021, p < 0.001, D = 0.10). Moreover, we used a Generalized Additive Model (GAM) that included spatial and environmental predictors (i.e., canopy cover calculated from multispectral NDVI and photogrammetrically derived digital elevation model) to model TIR temperature from a transect along the main river channel. This model explained 89% of the deviance, and the predictor variables showed statistical significance. Collectively, our study underscored the potential of a multispectral/TIR sensor to assess thermal heterogeneity in large and complex river systems.

Barker, Matthew I. (ORCID:0000000252864930)↗
NASA NTRSDate not supplied

Wastewater Brine Purification and Recovery through Electrodialysis Ion Exchange

Reutilizing resources onboard the International Space Station (ISS) and for future deep space missions are critical for mission longevity and sustainability. Wastewater brine produced from water recovery systems contain chemical species that could be processed into a potential fertilizer for future plant systems. This can be achieved through a process called electrodialysis ion exchange. Wastewater containing inorganic salt components are fed through a series of ion exchange membranes to produce fertilizer (a phosphate rich stream), electrolysis-grade water, and other useful commodities. Electrodialysis cells consisting of anion and cation exchange membranes, monovalent anion exchange membranes, and bipolar membranes were utilized to achieve selective ion exchange. The use of the electrodialysis cells were effective for both water extraction and ion separation. Ions successfully diffused across their respective membranes into the concentrate, acid, and base streams. This resulted in pure water, a phosphate rich stream, and a separate anion/hydrogen and cation/hydroxide stream. However, sulfate and some phosphate ions were able to diffuse through the monovalent anion exchange membrane into the acid stream. This resulted in predominantly phosphate ions remaining in the concentrate. Optimization of the process was accomplished by altering flowrates of each stream and initial volumes, adjusting the power input and resulting current through each cell, and varying the starting parameters by splitting the inorganic waste input into the diluate and the concentrate. As expected, increasing the flowrate and the power input to each cell reduced the overall time of the process. However, mission constraints may require a longer duration process in order to reduce the power consumption. Further analysis will be required to determine the power input necessary to achieve ion diffusion effectively and in a timely manner.

Ion Exchange Membranes↗
NASA NTRS2017

Mining Twitter Data to Augment NASA GPM Validation

The Twitter data stream is an important new source of real-time and historical global information for potentially augmenting the validation program of NASA's Global Precipitation Measurement (GPM) mission. There have been other similar uses of Twitter, though mostly related to natural hazards monitoring and management. The validation of satellite precipitation estimates is challenging, because many regions lack data or access to data, especially outside of the U.S. and in remote and developing areas. The time-varying set of "precipitation" tweets can be thought of as an organic network of rain gauges, potentially providing a widespread view of precipitation occurrence. Twitter provides a large source of crowd for crowdsourcing. During a 24-hour period in the middle of the snow storm this past March in the U.S. Northeast, we collected more than 13,000 relevant precipitation tweets with exact geolocation. The overall objective of our project is to determine the extent to which processed tweets can provide additional information that improves the validation of GPM data. Though our current effort focuses on tweets and precipitation, our approach is general and applicable to other social media and other geophysical measurements. Specifically, we have developed an operational infrastructure for processing tweets, in a format suitable for analysis with GPM data; engaged with potential participants, both passive and active, to "enrich" the Twitter stream; and inter-compared "precipitation" tweet data, ground station data, and GPM retrievals. In this presentation, we detail the technical capabilities of our tweet processing infrastructure, including data abstraction, feature extraction, search engine, context-awareness, real-time processing, and high volume (big) data processing; various means for "enriching" the Twitter stream; and results of inter-comparisons. Our project should bring a new kind of visibility to Twitter and engender a new kind of appreciation of the value of Twitter by the science research communities.

validatio↗
NASA NTRS1980

The Infrared Astronomical Satellite /IRAS/ Scientific Data Analysis System /SDAS/ sky flux subsystem

The sky flux subsystem of the Infrared Astronomical Satellite Scientific Data Analysis System is described. Its major output capabilities are (1) the all-sky lune maps (8-arcminute pixel size), (2) galactic plane maps (2-arcminute pixel size) and (3) regional maps of small areas such as extended sources greater than 1-degree in extent. The major processing functions are to (1) merge the CRDD and pointing data, (2) phase the detector streams, (3) compress the detector streams in the in-scan and cross-scan directions, and (4) extract data. Functional diagrams of the various capabilities of the subsystem are given. Although this device is inherently nonimaging, various calibrated and geometrically controlled imaging products are created, suitable for quantitative and qualitative scientific interpretation.

Stagner, J. R.↗
NASA NTRS1983

Remote Sensing techniques used to characterize soil erosion in southwestern Sao Paulo state

Within randomly sampled squares of a 1 km x 1 km grid, rill/gullies frequency, land cover/land use type and shape of the slopes were extracted from aerial photographs of the Ribeirao Anhumas drainage basin. Mean slope gradient, stream frequency and slope length were calculated on topographic maps. Ground truth data on fine sand/coarse sand ratio and vegetation cover densities were obtained. The MSS-LANDSAT-2 data (CCTs) were analyzed using single-cell, cluster synthesis and slicer algorithms. Graphical and statistical analyses of the data indicate that different slope gradients and land cover/land use types are the most significant factors related to the soil erosion process. The digital analysis of MSS data allowed the association among gray level classes and vegetation cover classes, which defined seven classes. These gray level classes and slope gradient classes were used to rank erosion risk.

Parada, N. D. J.↗
NASA NTRS1987

Experimental, water droplet impingement data on two-dimensional airfoils, axisymmetric inlet and Boeing 737-300 engine inlet

An experimental method has been developed to determine the droplet impingement characteristics on two- and three-dimensional bodies. The experimental results provide the essential droplet impingement data required to validate particle trajectory codes, used in aircraft icing analyses and engine inlet particle separator analyses. A body whose water droplet impingement characteristics are required is covered at strategic locations by thin strips of moisture absorbing (blotter) paper, and then exposed to an air stream containing a dyed-water spray cloud. Water droplet impingement data are extracted from the dyed blotter strips, by measuring the optical reflectance of the dye deposit on the strips, using an automated reflectometer. Impingement efficiency data obtained for a NACA 65(2)015 airfoil section, a supercritical airfoil section, and Being 737-300 and axisymmetric inlet models are presented in this paper.

Papadakis, M.↗
NASA NTRS1989

An Experimental Method for Measuring Water Droplet Impingement Efficiency on Two- and Three-dimensional Bodies

An experimental method was developed to determine the droplet impingement characteristics on 2-D and 3-D bodies. The experimental results provide the essential droplet impingement data required to validate water droplet trajectory codes, which are used in the analysis of aircraft icing. A body, whose water droplet impingement characteristics are required, is covered at strategic locations by thin strips of moisture absorbing (blotter) paper, and is exposed to an air stream containing a water dye solution spray cloud. Water droplet impingement data are extracted from the dyed blotter strips by measuring the optical reflectance of the dye deposit on the strips, using an automated reflectometer. Models tested include a 4-inch diameter cylinder, a NACA 652015 airfoil section, a MS(1)-0317 supercritical airfoil section, three simulated ice shapes, an axisymmetric inlet and a Boeing 737-300 inlet model. Detailed descriptions of the dye tracer technique, instrumentation, data reduction method and the results obtained are presented. Analytical predictions of collection efficiency characteristics for most test configurations are included for comparison.

Trajectory code validation↗
NASA NTRS1995

Implicit schemes and parallel computing in unstructured grid CFD

The development of implicit schemes for obtaining steady state solutions to the Euler and Navier-Stokes equations on unstructured grids is outlined. Applications are presented that compare the convergence characteristics of various implicit methods. Next, the development of explicit and implicit schemes to compute unsteady flows on unstructured grids is discussed. Next, the issues involved in parallelizing finite volume schemes on unstructured meshes in an MIMD (multiple instruction/multiple data stream) fashion are outlined. Techniques for partitioning unstructured grids among processors and for extracting parallelism in explicit and implicit solvers are discussed. Finally, some dynamic load balancing ideas, which are useful in adaptive transient computations, are presented.

Venkatakrishnam, V.↗
DOE OSTI2022

Comparison of basin-scale in situ and meteoric 10 Be erosion and denudation rates in felsic lithologies across an elevation gradient at the George River, northeast Tasmania, Australia

Long-term erosion rates in Tasmania, at the south ern end of Australia’s Great Dividing Range, are poorly known; yet, this knowledge is critical for making informed land-use decisions and improving the ecological health of coastal ecosystems. Here, we present quantitative, geologically relevant estimates of erosion rates for the George River basin, in northeast Tasmania, based on in situ-produced 10 Be ( 10 Be i ) measured from stream sand at two trunk channel sites and seven tributaries (mean: 24.1 ± 1.4 Mg km -2 yr -1 ; 1σ). These new 10 Bei-based erosion rates are strongly related to elevation, which appears to control mean annual precipitation and temperature, suggesting that elevation-dependent surface processes influence rates of erosion in northeast Tas mania. Erosion rates are not correlated with slope in contrast to erosion rates along the mainland portions of Australia’s Great Dividing Range. We also extracted and measured meteoric 10 Be ( 10 Be m ) from grain coatings of sand-sized stream sediment at each site, which we normalize to measured concentrations of reactive 9 Be and use to estimate 10 Be m -based denudation rates for the George River. 10 Bem/ 9 Be reac denudation rates replicate 10 Be i erosion rates within a factor of 3 but are highly sensitive to the value of 9 Be that is found in bedrock ( 9 Be parent ), which was unmeasured in this study. 10 Bem/ 9 Be reac denudation rates seem sensitive to recent mining, forestry, and agricultural land use, all of which resulted in widespread topsoil disturbance. Our findings suggest that 10 Bem/ 9 Be reac denudation metrics will be most useful in drainage basins that are geologically homogeneous, where recent disturbances to topsoil profiles are minimal, and where 9 Be parent is well constrained.

58 GEOSCIENCES↗
DOE OSTI2020

Disulfonamide Ligands as f-Element Extractants from Alkaline High-Level Waste

Almost 100 million gallons of high level waste (HLW) has been generated from defense reprocessing programs to support nuclear weapons production. HLW is currently stored at the Hanford and Savannah River Sites (SRS) [1]. It contains radioactive components, such as {sup 137}Cs, {sup 99}Tc and {sup 90}Sr, as well as large amounts of non-radioactive species, including solvated cations and insoluble metal hydroxides. HLW has high concentration of soluble hydroxides ([OH{sup -}] = 2 M at SRS [2]), complexing inorganic anions ([NO{sub 3}{sup -}] ∼ 0.65 - 3.7 M at SRS [2]) and a high ionic strength. Even though the majority of actinide component in alkaline HLW is precipitated, studies of An(III) and Ln(III) complexation in highly alkaline solutions in the presence of high nitrate concentrations have showed that soluble nitrate complexes can be formed [3]. The current treatment of HLW at SRS currently consists of two processes: The Actinide Removal Process (ARP) and the Next-Generation Caustic-Side Solvent Extraction process (NG-CSSX). Strontium and actinides are removed by sorption on monosodium titanate through the Actinide Removal Process (ARP) commonly referred to as the alpha-strike step [4]. Then, cesium is selectively extracted from the alkaline media via the Caustic-Side Solvent Extraction (CSSX) process [5]. The CSSX solvent consists of a calix[4]arene-crown-6 extractant dissolved in an inert hydrocarbon matrix containing i) a solvent modifier (alkylphenoxy alcohol) which increases extractant solubility and prevents third phase formation, and ii) a suppressor (trioctylamine or guanidine) - that mitigates surfactant effects. The CSSX process removes {sup 137}Cs selectively and rapidly, yet the post- CSSX aqueous stream may still contain high amounts of An, thus requiring a second ARP treatment (referred to as 'alpha-finishing') for some tanks. Despite the success of the ARP process in removing Sr and An, it often represents the kinetic bottleneck of integrated processing, as it is slower than solvent extraction. Understanding the complexation of actinides by organic ligands that are compatible with the CSSX process could eventually lead to a combined caustic-side Cs/Sr/actinide extraction process with better economics due to a reduced amount of monosodium titanate and/or a shorter required contact time with titanate during ARP. This would ensure a low-activity waste (LAW) stream with no actinides without additional ARP processing post-CSSX. Disulfonamides were studied for extraction of Sm(III) from alkaline aqueous media of pH 10-14 into dichloromethane. Up to 82% of Sm(III) was extracted from solutions of pH 12.5 -13.5 and up to 84% from solutions of pH 10.5 - 11.5. These results show some resemblance with Am extraction results by calixarene ligands previously reported [10]. Kinetic studies demonstrated that even 5 min is enough to complete stripping, whereas extraction is time-limiting process and requires up to 20 h for efficient removal of Sm(III) from alkaline aqueous media. Determination of composition of complexes in solution after extraction by the equilibrium shift method showed a 1:1 Sm(III):dsa-2 complexation ratio for the extracted species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Enabling Microscale Processing: Combined Raman and Absorbance Spectroscopy for Microfluidic On-Line Monitoring

Microfluidics have many potential applications including characterization of chemical processes on a reduced scale, spanning the study of reaction kinetics using on-chip liquid–liquid extractions, sample pretreatment to simplify off-chip analysis, and for portable spectroscopic analyses. The use of in situ characterization of process streams from laboratory-scale and microscale experiments on the same chemical system can provide comprehensive understanding and in-depth analysis of any similarities or differences between process conditions at different scales. A well-characterized extraction of Nd(NO 3 ) 3 from an aqueous phase of varying NO 3– (aq) concentration with tributyl phosphate (TBP) in dodecane was the focus of this microscale study and was compared to an earlier laboratory-scale study utilizing counter current extraction equipment. Here, we verify that this same extraction process can be followed on the microscale using spectroscopic methods adapted for microfluidic measurement. Concentration of Nd (based on UV–vis) and nitrate (based on Raman) was chemometrically measured during the flow experiment, and resulting data were used to determine the distribution ratio for Nd. Extraction distributions measured on the microscale were compared favorably with those determined on the laboratory scale in the earlier study. Both micro-Raman and micro-UV–vis spectroscopy can be used to determine fundamental parameters with significantly reduced sample size as compared to traditional laboratory-scale approaches. This leads naturally to time, cost, and waste reductions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Recycling of Printed Circuit Boards to Recover Critical Materials

The printed circuit board (PCB), a central component of most electronic devices, represents a significant fraction of the electronic product waste stream. The complex composition of PCBs, consisting of metals, polymers, and fiberglass, requires specialized recovery steps to reclaim valuable and critical materials and the safe disposal of brominated compounds. In this review paper, we describe the current state of critical material recovery and traditional recycling technologies and identify key obstacles to large-scale implementation. Metals present at high concentrations, such as copper, lead, and iron, are conventionally recovered from PCBs using hydrometallurgical, pyrometallurgical, or electrometallurgical processes. Hydrometallurgical methods achieve high selectivity through chemical leaching but pose significant challenges for effluent and reagent recovery. Pyrometallurgical methods facilitate rapid metal separation through smelting but require substantial energy and may release harmful gases. Electrometallurgical techniques produce high-purity metals but are constrained by pretreatment requirements and the consumption of energy. The non-metallic fraction of PCB waste is recycled using thermochemical conversion, microwave-aided heating, and direct recycling of epoxy–fiberglass composites, enabling material or energy recovery. The recovered polymer from direct recycling may have reduced mechanical strength and poor compatibility with new polymer matrices, and the resulting products from the thermal conversion suffer from incomplete conversion, degradation of quality, and residual contamination, as compared to synthetic polymers. Recent process developments have focused on extracting rare earth and supply-critical materials present at lower concentrations in the waste stream. The literature on existing and emerging approaches for recycling PCB wastes is reviewed to identify sustainable, economically viable, and environmentally responsible strategies for the recovery and reuse of critical materials from waste streams.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Selective sulfidation of metal compounds

There is urgent, unprecedented demand for critical by-product and co-product metallic elements for the infrastructure (magnets, batteries, catalysts and electronics) needed to power society with renewable electricity1,2,3. However, the extraction of d-block and f-block metals from mineral and recycled streams is thermodynamically difficult, typically requiring complete dissolution of the materials, followed by liquid–liquid separation using metal-ion complexing or chelating behaviour4,5. The similar electronic structure of these metals results in poor separation factors, necessitating immense energy, water and chemicals consumption6,7,8. Here a metal-processing approach based on selective anion exchange is proposed. Several simple process levers (gas partial pressure, gas flowrate and carbon addition) are demonstrated to selectively sulfidize a target metal from a mixed metal-oxide feed. The physical and chemical differences between the sulfide and oxide compounds (for example, density, magnetic susceptibility and surface chemistry) can then be exploited for vastly improved separation compared with liquid–liquid methods9. The process conditions of sulfidation are provided for 56 elements and demonstrated for 15 of them. An assessment of the environmental and economic impacts suggests a path towards 60–90% reductions in greenhouse gas emissions while offering substantial capital cost savings compared with liquid–liquid hydrometallurgy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Towards a study protocol: A data-driven workflow to identify error sources in direct ink write mechatronics

Abstract Using Direct Ink Write (DIW) technology in a rapid and large-scale production requires reliable quality control for printed parts. Data streams generated during printing, such as print mechatronics, are massive and diverse which impedes extracting insights. In our study protocol approach, we developed a data-driven workflow to understand the behavior of sensor-measured X- and Y- axes positional errors with process parameters, such as print velocity and velocity control. We uncovered patterns showing that instantaneous changes in the velocity, when the build platform accelerates and decelerates, largely influence the positional errors, especially in the X- axis due to the hardware architecture. Since DIW systems share similar mechatronic inputs and outputs, our study protocol approach is broadly applicable and scalable across multiple systems. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hydrogen from Carbonaceous Waste Material - Hydrogen Fuel Cells Prize Phase 2 Voucher: Cooperative Research and Development (Final Report)

NLR conducted a conceptual design study for scaling up biomass conversion technology from Green Fortress Engineering (GFE). GFE has proprietary technology where cellulosic biomass is thermally converted to a tar-free syngas. A ceramic membrane separation unit (MSU) previously developed with NLR can extract high-purity hydrogen from the syngas. The energy content of the retentate stream is sufficient to power the process with a gas-powered genset. Design details including mass and energy balances, process and instrumentation diagrams (P&ID), and major equipment schedules were delivered.

08 HYDROGEN↗
NASA NTRS2003

CO2 capture by means of an enzyme-based reactor

We report a means for efficient and selective extraction of carbon dioxide (CO(2)) at low to medium concentration from mixed gas streams. CO(2) capture was accomplished by use of a novel enzyme-based, facilitated transport contained liquid membrane (EBCLM) reactor. The parametric studies we report explore both structural and operational parameters of this design. The structural parameters include carbonic anhydrase (CA) concentration, buffer concentration and pH, and liquid membrane thickness. The operational parameters are temperature, humidity of the inlet gas stream, and CO(2) concentration in the feed stream. The data show that this system effectively captures CO(2) over the range 400 ppm to at least 100,000 ppm, at or around ambient temperature and pressure. In a single pass across this homogeneous catalyst design, given a feed of 0.1% CO(2), the selectivity of CO(2) versus N(2) is 1,090 : 1 and CO(2) versus O(2) is 790 :1. CO(2) permeance is 4.71 x 10(-8) molm(-2) Pa(-1) sec(-1). The CLM design results in a system that is very stable even in the presence of dry feed and sweep gases.

NASA Discipline Life Support Systems↗