SEARCH · Engineering Papers

Results for “stream discharge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Tests of a 2-Stage, Axial-Flow, 2-Phase Turbine

A two phase flow turbine with two stages of axial flow impulse rotors was tested with three different working fluid mixtures at a shaft power of 30 kW. The turbine efficiency was 0.55 with nitrogen and water of 0.02 quality and 94 m/s velocity, 0.57 with Refrigerant 22 of 0.27 quality and 123 m/s velocity, and 0.30 with steam and water of 0.27 quality and 457 m/s velocity. The efficiencies with nitrogen and water and Refrigerant 22 were 86 percent of theoretical. At that fraction of theoretical, the efficiencies of optimized two phase turbines would be in the low 60 percent range with organic working fluids and in the mid 50 percent range with steam and water. The recommended turbine design is a two stage axial flow impulse turbine followed by a rotary separator for discharge of separate liquid and gas streams and recovery of liquid pressure.

Elliott, D. G.↗

NASA NTRS2005

Tectonic-Climate Interactions in Action Orogenic Belts: Quantification of Dynamic Topography with SRTM data

This project was undertaken to examine the approach to steady state in collisional mountain belts. Although the primary thrust of this grant was to look at larger collisional mountain belts, such as the Himalaya, the Tien Shan, and Southern Alps, we began by looking at smaller structures represented by growing and propagating folds. Like ranges that are evolving toward a topographic steady state, these folds undergo a series of morphologic changes as they are progressively uplifted and eroded. We wanted to document the nature of these changes and to try to discern some of the underlying controls on them. We initially focused on the Wheeler Ridge anticline in southern California. Subsequently, we progressed to looking at the topographic development and the effects of differential uplift and glaciation on the Kyrgyz Range in the northern Tien Shan. This range is unusual inasmuch as it is transformed along its length from a simple uplift with a largely preserved Mesozoic erosion surface arching across it to a highly dissected and heavily glaciated uplift in the region where uplift has been sustained at higher rates over longer intervals. In efforts to understand the distribution of erosion rates at 10(exp 3) - 10(exp 5) year time scales, cosmogenic radionuclide (CRN) concentrations have been gaining increasingly widespread usage (Brown et al., 1995; Riebe et al., 2004; Riebe et al., 2001; Vance et al., 2003). Most studies to date, however, have been conducted in slowly eroding ranges. In rapidly eroding mountains where landslides deliver most of the sediments to the rivers, we hypothesized that CRN concentrations could be highly perturbed by the stochastic processes of landsliding. Therefore, we undertook the development of a numerical model that simulated the effects of both landsliding and grain-by-grain attrition within fluvial catchments. This modeling effort has shown the effects of catchment size and erosion rate on CRN concentrations and allows a prediction of where to sample to obtain the optimal erosion rate estimates using CRN techniques. Finally, we developed computational techniques to operate on DEMs to extract useful information that would enable quantification of climate-erosion interactions. In particular, we worked on rapid techniques to define catchments of any given range of sizes, to extract channel gradients, to combine precipitation information to calculate discharge, and to utilize various stream-power models to determine the erosional energy within any given catchment within a transect. We briefly describe results from Wheeler Ridge, the Kyrgyz Range, the Nepal Himalaya, and our numerical modeling.

Burbank, Douglas W.↗

DOE OSTI2020

Solidification of REDC Organics and Airborne Release Fraction Measurements

The Radiochemical Engineering Development Center (REDC) generates various liquid organic wastes from processing irradiated targets to recover heavy elements. In the past, these organics were discharged to the Oak Ridge National Laboratory (ORNL) liquid low-level waste (LLLW) system, along with the aqueous waste. Because of a reduction in aqueous LLLW from other ORNL generators and an increase in the radionuclide concentration, particularly 238 Pu, in the organic waste stream, the organics can no longer be discharged to the LLLW system. The plan is to solidify the liquid organic waste for disposal as solid debris waste. The documented safety analysis for REDC uses an airborne release fraction of 5 x 10 -4 with a respirable fraction of 0.2 for plutonium and other actinides from packaged solid debris waste during a fire scenario, for an overall airborne release fraction/respirable fraction of 10 -4 . Solidifying the organic liquids, either by using PM-199 Organoclay ® or by grouting, would produce solid waste forms with no free liquid, which should qualify for disposal at the Waste Isolation Pilot Plant. The use of Organoclay would be much simpler to implement inside a hot cell. Granular Organoclay can be added to the organic waste solutions until there is a dry layer on top of the liquid and then allowed to cure for a few hours. Grouting the liquids would require using multiple ingredients and mixing steps. Both methods produced waste forms that trapped cerium, as a surrogate for plutonium, inside the waste, with airborne release fractions during fire scenario tests of well below the 10 -4 limit.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Solidification of REDC Organics For Disposal As Solid Waste

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1988

Variability of surface pigment concentrations in the South Atlantic Bight

A time sequence of surface pigment images of the South Atlantic Bight (SAB), derived from the Nimbus 7 CZCS for the period between November 1978 and October 1979, was correlated with in situ observations of hydrographic parameters, fresh-water discharge, sea level, coastal winds, and currents in order to couple physical processes and the spatial and temporal variability of the surface pigment fields. A definite seasonal modulation of the surface pigment fields was found, with the concentrations in the Georgia Bight being highest in summer, and those north of Cape Romain highest in winter. This phase difference was found to be the result of variations in wind fields, Gulf Stream-shelf interactions, and fresh-water discharge patterns. At some locations (e.g., near Charleston) the alongshore band of high pigment concentrations increased in width throughout the year; at other locations (near Jacksonville), the alongsore band exhibited a minimum width in the summer and a maximum width in the fall of 1979.

Mcclain, Charles R.↗

NASA NTRS1973

Power law time dependence of river flood decay and its relationship to long term discharge frequency distribution

Investigations have continued into the possibility that significant information on stream flow rates can be obtained from aerial and satellite imagery of river meander patterns by seeking a correlation between the meander and discharge spectra of rivers. Such a correlation could provide the basis for a simple and inexpensive technique for remote sensing of the water resources of large geographical areas, eliminating the need for much hydrologic recording. The investigation of the nature of the meander and discharge spectra and their interrelationship can also contribute to a more fundamental understanding of the processes of both river meander formation and drainage of large basins. It has been found that floods decay with an inverse power law dependence on time. The exponent of this dependence varies from river to river and even from station to station along the same river. This power law time dependence makes possible the forecasting of river discharge with an uncertainty of about 5% for as long as a month following the flood peak.

Schubert, G.↗

DOE OSTI2026

Field and Model Data Associated with the Manuscript “Drivers of Streamflow Intermittency in Humid Regions: 1. Evaluating Above- and Below-ground Controls of Flow Persistence in a Forested Catchment”

This package contains field data, modeling files, and scripts supporting the investigation of the drivers of streamflow intermittency in a forested catchment. It includes the field data collected from electrical resistivity tomography (ERT) surveys, ground penetrating radar (GPR), continuous self-potential (SP) monitoring, electromagnetic (EM) imaging, groundwater and stilling well. In addition, it contains the data and results of the coupled water- and electrical-flow model developed using the COMSOL Multiphysics and Advanced Terrestrial Simulator (ATS), as well as software files and Jupyter notebooks used to process the data and generate figures in the manuscript submitted for peer review. The data archive is organized in the following directories: 1) Climate Includes hourly precipitation and daily evapotranspiration time series (2024 – 2025) provided as CSV files, alongside a text file detailing dataset units. 2) Coupled_model Contains two subfolders: Synthetic and Field_Application subfolder. Synthetic subfolder contains the ATS XML input script (can be opened using any code editor) for the four synthetic hydrological cases tested (Connected and gaining, Connected and losing, Disconnected and losing, and dry stream). It also includes other experimental cases to test the influence of precipitation and concentration gradient. For each synthetic case, the flow model simulation is executed using the ATS XML scripts and the included Python script (generate_data_set.py) to convert ATS output to COMSOL-ready input. COMSOL Multiphysics template (.mph can be opened with the commercial software COMSOL and requires a license) is executed using the ATS output data to simulate the potential field. It also includes the Synthetic_model_plot.ipynb (can be opened using any code editor) to visualize the SP result and generate manuscript figures. The data subfolder contains mesh files to run both the ATS (.exo and .stl files can be viewed using Paraview; .h5 files can be opened using HDFView software and h5py Python package) and COMSOL models. Field_Application subfolder contains two subfolders: ES_MDA_inversion and Final_Model. ES_MDA_inversion contains the Python script (.py can be opened using any code editor) and SP observation data used to run the Ensemble Smoother with Multiple Data Assimilation (ES-MDA) inversion sequence to get the optimal model parameters. The Final_model subfolder contains the ATS XML input scripts, data files, output data for the two SP sites. The same workflow steps outlined for the Synthetic subfolder apply here. It also contains the Jupyter notebook (Plot_final_calib.ipynb) to visualize the results of the modeled SP, stream-groundwater exchange and moisture content. 3) Discharge Includes the electrical conductivity (EC) time series (provided as CSV files) from salt slug injections. It also includes the Jupyter notebook (Discharge_process.ipynyb) used to estimate discharge. All discharge measurements collated into rating_curve_processed.csv 4) EM Contains the CSV file of the EM data from the DUALEM-42, including spatial coordinates (x, y, z), apparent conductivity, and in-phase measurements at 2 m coil separations for horizontal coplanar (HCP) and perpendicular (PRP) geometries. 5) ERT Contains raw resistivity data (provided as CSV files), spatial location of each of the electrodes (provided as CSV files), and files used for the resistivity inversion (.resipy can be opened with the open-source ResIPy software). 6) GPR Includes GPR field datasets collected at 100 MHz and 250 MHz antenna frequencies, along with the processing/interpretation project file (GPR_process.gpz can be viewed using EKKO_Project 6, a commercial software by Sensors & Software that requires a license). 7) Slug_test Includes the slug test data at all the groundwater wells provided as CSV files, as well as the Jupyter notebook (Slug_test.ipynb) for calculating hydraulic conductivity. 8) SP Contains the SP data collected in field at the two SP sites (one in the perennial reach and the other in the intermittent reach), provided as DAT files. 9) Well_data Contains two subfolders: 1) Raw, which provides unprocessed pressure, electrical conductivity and temperature timeseries downloaded from the loggers in all the groundwater and stilling wells, and 2) Processed, which contains sorted, QA/QC timeseries data for each well. The data archive also contains data_process.ipynb, a Jupyter notebook used for field data analysis and generating figures (plotting well, SP, climate, and discharge data, as well as calculating head gradient at sites with nested groundwater wells). It also includes DTW.ipynb, a Jupyter notebook containing the code for the dynamic time warping (DTW) with sliding window to evaluate SP signal synchronicity.

ATS↗

DOE OSTI2023

AmeriFlux FLUXNET-1F US-ALQ Allequash Creek Site

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-ALQ Allequash Creek Site. This is the FLUXNET version of the carbon flux data for the site US-ALQ Allequash Creek Site produced by applying the standard ONEFlux (1F) software. Site Description - From Turner et al (2019): The 32 ha fen wetland is situated in Trout Lake Basin in northern WI (46.030759,−89.606730). It is part of the National Science Foundation’s North Temperate Lakes Long-Term Ecological Research (NTL-LTER) as formerly as part of the US Geological Survey’s Water, Energy and Biogeochemical Budgets Program (WEBB) Trout Lake site. The soil comprises outwash sand and gravel atop crystalline bedrock. Due to the glacial outwash, the soil is highly conductive and promotes groundwater discharge to the nearby creek. A headwater stream, Allequash Creek, flows from the southeast to the northwest through the fen. The eddy covariance flux tower is located along the stream which is surrounded by tree stands to the northeast and southwest that create a “valley” and cause channelized flow in the direction of the stream.

Desai, Ankur↗

DOE OSTI2023

Cation Exchange Capacity, Anion Exchange Capacity, and Mineralogy of F-Area Aquifer Sediments

Strontium-90 (Sr-90) is a contaminant of concern in groundwater and surface water at both F-Area and H-Area Seepage Basins. This contaminant was disposed of, along with other heavy metals and radionuclides, into a series of unlined seepage basins from 1955 until 1988. The acidity of the wastewater increased Sr-90 mobility from the basin soil through the vadose zone and into the Upper Aquifer Zone (UAZ), creating a groundwater plume that discharges into wetlands areas and a local stream called Fourmile Branch.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA NTRS1979

Investigation of air stream from combustor-liner air entry holes, 3

Jets flowing from air entry holes of the combustor liner of a gas turbine were investigated. Cold air was supplied through the air entry holes into the primary hot gas flows. The mass flow of the primary hot gas and issuing jets was measured, and the behavior of the air jets was studied by the measurement of the temperature distribution of the gas mixture. The air jets flowing from three circular air entry holes, single streamwise long holes, and two opposing circular holes, parallel to the primary flow were studied along with the effects of jet and gas stream velocities, and of gas temperature. The discharge coefficient, the maximum penetration of the jets, the jet flow path, the mixing of the jets, and temperature distribution across the jets were investigated. Empirical expressions which describe the characteristics of the jets under the conditions of the experiments were formulated.

Aiba, T.↗

NASA NTRS1959

Comparison of Calculated and Experimental Total-Pressure Loss and Airflow Distribution in Tubular Turbojet Combustors with Tapered Liners

Incompressible-flow calculations were performed to determine the effects of combustor geometric and operating variables on pressure loss and airflow distribution in a tubular combustor with a tapered liner. The calculations include the effects of momentum transfer between annulus and liner gas streams, annulus wall friction, heat release, and discharge coefficients of liner air-entry holes. Generalized curves are presented which show the effects of liner-wall inclination, liner open hole area, and temperature rise across the combustor on pressure loss and airflow distribution for a representative parabolic liner hole distribution. A comparison of the experimental data from 12 tapered liners with the theoretical calculations indicates that reasonable design estimates can be made from the generalized curves. The calculated pressure losses of the tapered liners are compared with those previously reported for tubular liners.

Grobman, Jack S.↗

NASA NTRSDate not supplied

Latest Results from NASA Ames’ COSmIC and Optical Constants Facility (OCF): Determining Optical Constants for Titan, Pluto and Protoplanetary Disks Applications

The NASA Ames COsmic SImulation Chamber (COSmIC) is a unique experimental facility that can be used, among many applications, to produce solid particles from gas phase molecular precursors at low temperature (150 K) using a plasma discharge to induce the chemistry in the stream of a free jet expansion. The choice of the initial gas mixture used to produce the solid sample allows the simulation of either cold planetary atmospheres like Titan or Pluto (with N2/CH4-based initial mixtures), or circumstellar environments (with Ar/CxHy-based initial mixtures). The Ames Optical Constants Facility (OCF) allows the determination of optical constants covering a broad wavelength range with high spectral resolution for solid materials, analogs of organic refractory materials formed in planetary and astrophysical environments. The core of the OCF is a Fourier transform infrared (FTIR) spectrometer that allows the continuous characterization of solid samples in the visible to far-infrared (FIR) range (0.59–200 μm, 16,950–50 cm−1). Modeling of the laboratory measurements conducted with the OCF allows the determination of accurate optical constants, n and k, over the full vis-FIR range. Here we present the latest results of two studies that combined (1) experiments performed with COSmIC to produce analogs of aerosols forming in Titan’s atmosphere and analogs of cosmic grains forming in circumstellar envelops, and (2) the characterization of these analogs with the OCF to provide the real and imaginary parts of their refractive indices, n + ik, to the community, from the visible to the FIR. These optical constants can be used as critical input parameters in radiative transfer, atmospheric and reflectance models to interpret observational data of, e.g., Titan’s atmosphere and protoplanetary disks. Providing optical constants for various materials of different compositions allows to explore a broad range of composition by simulating mixtures of materials. We also present a new project to produce analogs of Pluto’s atmospheric aerosols with COSmIC and determine their optical constants with OCF, to be used in reflectance spectra models for the interpretation of New Horizons observations of Lowell Regio, Sputnik Planitia and Cthulhu.

COsmic SImulation Chamber (COSmIC)↗

DOE OSTI2024

Hydrology Outweighs Temperature in Driving Production and Export of Dissolved Carbon in a Snowy Mountain Catchment

Abstract Terrestrial production and export of dissolved organic and inorganic carbon (DOC and DIC) to streams depends on water flow and biogeochemical processes in and beneath soils. Yet, understanding of these processes in a rapidly changing climate is limited. Using the watershed‐scale reactive‐transport model BioRT‐HBV and stream data from a snow‐dominated catchment in the Rockies, we show deeper groundwater flow averaged about 20% of annual discharge, rising to ∼35% in drier years. DOC and DIC production and export peaked during snowmelt and wet years, driven more by hydrology than temperature. DOC was primarily produced in shallow soils (1.94 ± 1.45 gC/m 2 /year), stored via sorption, and flushed out during snowmelt. Some DOC was recharged to and further consumed in the deeper subsurface via respiration (−0.27 ± 0.02 gC/m 2 /year), therefore reducing concentrations in deeper groundwater and stream DOC concentrations at low discharge. Consequently, DOC was primarily exported from the shallow zone (1.62 ± 0.96 gC/m 2 /year, compared to 0.12 ± 0.02 gC/m 2 /year from the deeper zone). DIC was produced in both zones but at higher rates in shallow soils (1.34 ± 1.00 gC/m 2 /year) than in the deep subsurface (0.36 ± 0.02 gC/m 2 /year). Deep respiration elevated DIC concentrations in the deep zone and stream DIC concentrations at low discharge. In other words, deep respiration is responsible for the commonly‐observed increasing DOC concentrations (flushing) and decreasing DIC concentrations (dilution) with increasing discharge. DIC export from the shallow zone was ~66% of annual export but can drop to ∼53% in drier years. Numerical experiments suggest lower carbon production and export in a warmer, drier future, and a higher proportion from deeper flow and respiration processes. These results underscore the often‐overlooked but growing importance of deeper processes in a warming climate.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1990

Multi-element spherical shell generation

A nozzle assembly in a multi-element spherical shell generation system includes first and second side-by-side spaced apart nozzles and a web portion extending between and connecting the nozzles. The first nozzle has an inner orifice adapted to discharge a first filler material and an outer annular orifice separated from and defined in concentric relation about the inner orifice and adapted to discharge a first shell material. The second nozzle has an inner orifice adapted to discharge a second filler material and an outer annular orifice separated from and defined in concentric relation about the inner orifice and adapted to discharge a second shell material. A multi-element spherical shell can be formed through employment of the nozzle assembly by merger with one another after discharge from the outer orifices of the nozzles of a pair of adjacent annular streams of liquid or molten shell wall material of different compositions and encapsulation by the mixed shell wall materials of a common encapsulated core fluids also simultaneously discharged by the inner orifices nozzles. On the other hand, the pair of encapsulating streams of shell wall material can be of the same materials which merge together and encapsulate core fluids of different compositions which will merge together after discharge from the nozzles.

Morrison, Andrew D.↗

NASA NTRS1999

System for Manipulating Drops and Bubbles Using Acoustic Radiation Pressure

The manipulation and control of drops of liquid and gas bubbles is achieved using high intensity acoustics in the form of and/or acoustic radiation pressure and acoustic streaming. generated by a controlled wave emission from a transducer. Acoustic radiation pressure is used to deploy or dispense drops into a liquid or a gas or bubbles into a liquid at zero or near zero velocity from the discharge end of a needle such as a syringe needle. Acoustic streaming is useful in manipulating the drop or bubble during or after deployment. Deployment and discharge is achieved by focusing the acoustic radiation pressure on the discharge end of the needle, and passing the acoustic waves through the fluid in the needle. through the needle will itself, or coaxially through the fluid medium surrounding the needle. Alternatively, the acoustic waves can be counter-deployed by focusing on the discharge end of the needle from a transducer axially aligned with the needle, but at a position opposite the needle, to prevent premature deployment of the drop or bubble. The acoustic radiation pressure can also be used for detecting the presence or absence of a drop or a bubble at the tip of a needle or for sensing various physical characteristics of the drop or bubble such as size or density.

Oeftering, Richard C.↗

NASA NTRS2002

Centrifugal Compressor Surge Margin Improved With Diffuser Hub Surface Air Injection

Aerodynamic stability is an important parameter in the design of compressors for aircraft gas turbine engines. Compression system instabilities can cause compressor surge, which may lead to the loss of an aircraft. As a result, engine designers include a margin of safety between the operating line of the engine and the stability limit line of the compressor. The margin of safety is typically referred to as "surge margin." Achieving the highest possible level of surge margin while meeting design point performance objectives is the goal of the compressor designer. However, performance goals often must be compromised in order to achieve adequate levels of surge margin. Techniques to improve surge margin will permit more aggressive compressor designs. Centrifugal compressor surge margin improvement was demonstrated at the NASA Glenn Research Center by injecting air into the vaned diffuser of a 4:1-pressure-ratio centrifugal compressor. Tests were performed using injector nozzles located on the diffuser hub surface of a vane-island diffuser in the vaneless region between the impeller trailing edge and the diffuser-vane leading edge. The nozzle flow path and discharge shape were designed to produce an air stream that remained tangent to the hub surface as it traveled into the diffuser passage. Injector nozzles were located near the leading edge of 23 of the 24 diffuser vanes. One passage did not contain an injector so that instrumentation located in that passage would be preserved. Several orientations of the injected stream relative to the diffuser vane leading edge were tested over a range of injected flow rates. Only steady flow (nonpulsed) air injection was tested. At 100 percent of the design speed, a 15-percent improvement in the baseline surge margin was achieved with a nozzle orientation that produced a jet that was bisected by the diffuser vane leading edge. Other orientations also improved the baseline surge margin. Tests were conducted at speeds below the design speed, and similar results were obtained. In most cases, the greatest improvement in surge margin occurred at fairly low levels of injected flow rate. Externally supplied injection air was used in these experiments. However, the injected flow rates that provided the greatest benefit could be produced using injection air that is recirculating between the diffuser discharge and nozzles located in the diffuser vaneless region. Future experiments will evaluate the effectiveness of recirculating air injection.

Skoch, Gary J.↗

DOE OSTI2024

The influence of burn severity on dissolved organic carbon concentrations across a stream network differs based on seasonal wetness conditions

Large, high-severity wildfires in many regions across the globe have increased concerns about their impacts on carbon cycling in watersheds. Altered sources of carbon and changes in catchment hydrology after wildfire can lead to shifts in dissolved organic carbon (DOC) concentrations in streams, which can have negative impacts on aquatic ecosystem health and downstream drinking-water treatment. Despite its importance, post-fire DOC responses remain relatively unconstrained in the literature, and we lack critical knowledge of how burn severity, landscape elements, and climate interact to affect DOC concentrations. To improve our understanding of the impact of burn severity on DOC concentrations, we measured DOC at 129 sites across a stream network extending upstream, within, and downstream of a large, high-severity wildfire in Oregon, USA. We collected samples across the study sub-basin during four distinct seasonal wetness conditions. We used our high-spatial-resolution data to develop spatial stream network (SSN) models to predict DOC across the stream network and to improve our understanding of the controls on DOC concentrations. Spatially, we found no obvious wildfire signal – instead, we observed a pattern of increasing DOC concentrations from the high-elevation headwaters to the sub-basin outlet, while the mainstem maintained consistently low DOC concentrations. This suggests that effects from large wildfires may be “averaged” out at higher stream orders and larger spatial scales. When we grouped DOC concentrations by burn severity group, we observed a significant decrease in the variability of DOC concentrations in the moderate and high burn severity sub-catchments. However, our SSN models were able to predict decreases in DOC concentrations with increases in burn severity across the stream network. Decreases in DOC concentrations were also highly variable across seasonal wetness conditions, with the greatest (–1.40 to –1.64 mg L –1 ) decrease occurring in the high-severity group during the wetting season. Additionally, our models indicated that in all seasons, baseflow index was more influential in predicting DOC concentrations than burn severity was, indicating that groundwater discharge can obscure the impacts of wildfire in a stream network. Overall, our results suggested that landscape characteristics can regulate the DOC response to wildfire. Moreover, our results also indicated that the seasonal timing of sampling can influence the observed response of DOC concentrations to wildfire.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1999

Ice Flow in the Northeast Greenland Ice Stream

As the use of satellite data for icesheet research has accelerated, new discoveries have changed the way that we think about ice discharge, and new tools have changed the way that we measure it. We have begun to apply a combination of remote sensing and ice sheet modeling techniques to study ice flow in the recently identified northeast Greenland ice stream. This ice stream shows evidence of organized flow far into the interior and has low-slope areas of rapid flow and regions of enhanced shear that resemble the ice streams of West Antarctica. The onset of rapid flow close to the ice divide and the evolution of its flow pattern, however, make this ice stream unique. Our investigation is aimed at increasing our understanding of this ice stream and its origins and role in the discharge of ice from the ice sheet and the effects that discharge may have on the history and evolution of the ice in northern Greenland. The ice flow data comes from satellite radar interferometry tied to reference points. We have applied this technique to measure the velocity over the entire ice stream, which is more than 700 km in length. The velocity contours reveal distinct, well-developed shear margins, which are coincident with linear features in the Synthetic Aperture Radar (SAR) amplitude imagery. It is surprising to see such defined, enhanced flow so far inland and so close to the ice divide. The velocity data and topography data are being used to feed a modeling effort that allows us to study the dynamics and character rapid flow. Additional information is contained in the original.

Joughin, Ian↗