Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stitching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Defining Probe Closure Offset and Scan Stitching Methodology for Element Contact Profilometry in the Hot Fuel Examination Facility

The Element Contact Profilometer (ECP) is a non-destructive post-irradiation examination (PIE) method established in the Materials and Fuels Complex (MFC) Hot Fuel Examination Facility (HFEF). The ECP suspends a fuel rod with a standard end-fitting in a vertical orientation and draws it between two opposed Sony probes with sapphire rod tips, which measure the diameter directly as a function of vertical stage position through contact profilometry. The ECP is equipped with concave rollers, which pinch the rod to maintain a consist position between these sapphire probe tips. A schematic of the analysis head is shown in Figure 1. The gripper that suspends the rod end-fitting is able to rotate to allow measuring of any azimuthal angle around the rod. This system is used to characterize the diameter of full-length light water reactor (LWR) irradiated fuel rods at multiple azimuthal angles in support of the Advanced Fuels Campaign (AFC).

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Anisotropic modeling and joint-MAP stitching for improved ultrasound model-based iterative reconstruction of large and thick specimens

One-sided non-destructive evaluation (NDE) is widely used to inspect materials, such as concrete structures in nuclear power plants (NPP). A widely used method for one-sided NDE is the synthetic aperture focusing technique (SAFT). The SAFT algorithm produces reasonable results when inspecting simple structures. However, for complex structures, such as heavily reinforced thick concrete structures, SAFT results in artifacts and hence there is a need for a more sophisticated inversion technique. Model-based iterative reconstruction (MBIR) algorithms, which are typically equivalent to regularized inversion techniques, offer a powerful framework to incorporate complex models for the physics, detector miscalibrations and the materials being imaged to obtain high quality reconstructions. Previously, we have proposed an ultrasonic MBIR method that signifcantly improves reconstruction quality compared to SAFT. However, the method made some simplifying assumptions on the propagation model and did not disucss ways to handle data that is obtained by raster scanning a system over a surface to inspect large regions. In this paper, we propose a novel MBIR algorithm that incorporates an anisotropic forward model and allows for the joint processing of data obtained from a system that raster scans a large surface. We demonstrate that the new MBIR method can produce dramatic improvements in reconstruction quality compared to SAFT and suppresses articfacts compared to the perviously presented MBIR approach.

Almansouri, Hani↗
DOE OSTI2019

Stitching an asymmetric texture with T 13 × Z 5 family symmetry

We propose T 13 = Z 13 x Z 3 as the underlying non-Abelian discrete family symmetry of the asymmetric texture presented. Its mod 13 arithmetic distinguishes each Yukawa matrix element of the texture. We construct a model of effective interactions that singles out the asymmetry and equates, without fine-tuning, the products of down-quark and charged-lepton masses at a GUT-like scale.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Stitching h-BN by atomic layer deposition of LiF as a stable interface for lithium metal anode

Defects are important features in two-dimensional (2D) materials that have a strong influence on their chemical and physical properties. Through the enhanced chemical reactivity at defect sites (point defects, line defects, etc.), one can selectively functionalize 2D materials via chemical reactions and thereby tune their physical properties. We demonstrate the selective atomic layer deposition of LiF on defect sites of h-BN prepared by chemical vapor deposition. The LiF deposits primarily on the line and point defects of h-BN, thereby creating seams that hold the h-BN crystallites together. The chemically and mechanically stable hybrid LiF/h-BN film successfully suppresses lithium dendrite formation during both the initial electrochemical deposition onto a copper foil and the subsequent cycling. In conclusion, the protected lithium electrodes exhibit good cycling behavior with more than 300 cycles at relatively high coulombic efficiency (>95%) in an additive-free carbonate electrolyte.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Satellite Enveloped with STITCHED Engineering Sensors for Detection of Approaching Objects

Today as well as tomorrows spaceborne assets impact almost all areas of national and nuclear security. Spaceborne assets can not only collect and disseminate valuable data, well beyond just the visual, but also track terrestrial-based mobile assets in real-time, and active spaceborne platforms potentially pose serious risk to vulnerable earth-based systems and infrastructures. The capability to defend national spaceborne assets from attack/interference is critical for security interests. This effort supports this mission through the cost-effective preeminent detection of approaching threats to our nation’s vital resources, in order to help secure and trust these high-value assets against the threats of tomorrow. This project develops novel fabrication techniques for conformal, low-profile and lightweight leakywave antenna (LWA) detection/imaging systems, which fuses technical embroidery (TE) and laser ablation (LA) processes with LWA design. Technical embroidery is an emerging field in additive textile manufacturing where flexible materials and functionalized fabrics are created for a wide variety of uses and purposes, while laser ablation is the process of removing material from a solid surface by irradiating it with a laser beam. Here, thin, conformal antenna designs are designed, modeled and fabricated using both TE and LA, to create lightweight, flexible and conformal object detection and imaging radars. This novel development ensures our nation’s ability to field advanced lightweight and conformal technologies to protect spaceborne assets.

42 ENGINEERING↗
DOE OSTI2025

Abbreviated Report for 25-FS-011: Switch and Stitch Similar Subgraph Synthesizer

Government institutions utilize software from a wide array of development sources, including those written by large software companies, government contractors, and open-source repositories. Avoiding installation of malicious software components is an important national security endeavor. Automated analysis of previously unseen software is an active research area, and there is much research in the design of systems that compare new software artifacts to a large set of previously seen software records organized by various behaviors they contain. One attractive approach is to turn each compiled software binary into a graph representation and apply a graph similarity model that scores pairs of binaries by their relative similarity. When a pair is deemed similar, it is useful to know why, in the sense of providing explanations to security analysts regarding which portions of the software they should look into further.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Trident Smyth: Near Real Time Sensor Fusion and Track Stitching Application

Sandia’s Sensor Data Fusion application is a NGA sponsored project that fuses tracks from different sensors to provide more accuracy than any single track. The application serves as the unclassified architecture for data ingestion, processing, and near real-time sensor fusion.

Sorroche, Joseph John [Sandia National Laboratorie↗