Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standardized reporting format”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Observed and Imputed Volumetric Soil Water Content Timeseries for the New Mexico Elevation Gradient

Reliable soil water content (SWC) data are essential for understanding dryland ecosystem dynamics, but high-frequency SWC sensors often fail, creating gaps in critical datasets. To address this, we developed a Bayesian mixture model that imputes missing SWC using both linear interpolation and an ecosystem water balance model (SOILWAT2), tested across six AmeriFlux eddy covariance tower sites in the New Mexico Elevation Gradient, demonstrating its effectiveness in reconstructing SWC patterns while providing insights into the factors driving SWC variability. Daily volumetric soil water content (SWC) data are provided as csv-formatted spreadsheets for the six AmeriFlux sites (US-Seg, US-Ses, US-Wjs, US-Mpi, US-Vcp, and US-Vcs). For each site there is an observed SWC file (site_SWC_gapfill.csv) and a file that contains imputed SWC (imputed_SWC_site.csv). The observed SWC files contain temperature corrected sensor values, tower precipitation data, as well as outputs from SOILWAT2 simulations that were used to impute SWC. The imputed files contain the original observed SWC values and the imputed missing SWC values. When SWC was missing from the original data, the missing value was imputed based on the Bayesian imputation mixture model. The posterior mean of all imputed values is reported as "mean_X". When the observed SWC was NOT missing, mean_X = observed SWC value (original data). The standard deviation, 2.5th percentile and the 97.5th percentile for the imputed values are also reported in the imputed files. There are readme text files for each file type explaining the contents of each column.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Convective Parameters Derived from Radiosonde Data (SONDEPARAM) Value-Added Product Report

Radiosondes provide fundamental observations of the vertical profile of atmospheric state (pressure, temperature, humidity, and winds), with important implications for subsequent studies on environmental controls on cloud conditions. Within convective cloud environments, there is an increasing demand for additional value-added products (VAPs) to facilitate the use of U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility radiosonde data sets. Such VAPs should provide quick and reliable estimates for several standard radiosonde parameters or quantities of interest using common assumptions, as well as open, flexible code for visualization and user interaction. The Convective Parameters Derived from Radiosonde Data (SONDEPARAM) VAP will apply several robust algorithms used in Wang et al. (2020) for the calculation of useful radiosonde convective cloud parameters, including the convective available potential energy (CAPE), convective inhibition (CIN), and other convective parameters, for several different assumptions regarding the initial parcel characteristics (i.e., surface-based, most unstable, mixed layer). These ARM VAP codes are developed in open, flexible Python formats, with the intention that these parameters/calculations will be incorporated into traditional ARM quick-look radiosonde plotting, yet associated with user-available codes for ease in user reproduction and assumption modification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Plasma-Assisted Pre-Chamber Ignition System for Highly Dilute Stoichiometric Heavy-Duty Natural Gas Engines (Final Technical Report)

This project explored advanced ignition technologies to significantly enhance efficiency and reduce operating costs for heavy-duty natural gas engines operating at stoichiometric conditions, while meeting ultra-low NOx emission standards. The main goal was to develop and validate a plasma-assisted pre-chamber ignition system that could deliver at least a 2% increase in brake thermal efficiency (BTE) and a 4% decrease in total cost of ownership (TCO) compared to a typical multi-cylinder engine with three-way catalyst aftertreatment, ensuring compatibility with the expected 2027 EPA/CARB regulations. In the first half of the project, the research team concentrated on developing and testing plasma-assisted pre-chamber ignition using nanosecond pulsed discharges. Extensive experiments were conducted in an optically accessible rapid-compression and expansion machine, a constant-volume chamber, and an optical single-cylinder engine. Experiments were coupled with CFD simulations. The work produced unique insights into pre-chamber flame formation, jet ignition, dilution effects, and flame quenching at pressures, temperatures, and dilution levels relevant to engines. Although plasma-assisted ignition showed promise in controlled lab settings, the research also identified fundamental and practical challenges when applying this technology to real engine conditions. Midway through the project, a crucial pivot was made, guided by three key findings. First, the power electronics required for nanosecond plasma discharges were found to be too costly for commercial use, undermining the project’s cost-of-ownership goals. Second, nanosecond plasma ignition was highly sensitive to turbulent flow in the pre-chamber, resulting in lower ignition reliability than traditional spark under engine-like conditions. Third, achieving a truly diffuse low-temperature plasma at high pressures near top dead center was not possible, reducing the anticipated chemical enhancement benefits. These results collectively suggested that continuing with plasma-assisted ignition was unlikely to meet both efficiency and cost objectives. In response, the project shifted focus to a more realistic approach: enhancing traditional spark-based pre-chamber ignition with significantly less spark energy. Using insights gained earlier in the project, the team redesigned the pre-chamber to maintain high dilution tolerance and quick combustion, even with lower ignition energy. Testing confirmed that with optimized pre-chamber design and combustion timing, a lower-energy spark could reliably ignite highly diluted stoichiometric mixtures, reduce burn time, and boost thermal efficiency. Final engine testing and techno-economic analysis verified that this revised approach successfully achieved the project goals. The optimized pre-chamber ignition system provided over a 2% increase in calculated brake thermal efficiency compared to the baseline engine. Notably, the lower ignition energy and simplified hardware reduced component stress, extended maintenance intervals, and lowered the total cost of ownership. When used with stoichiometric operation and traditional three-way aftertreatment, the system remained compatible with near-zero NOx emissions targets without increasing cost or complexity in the emissions control system. In summary, although the project deviated from its initial plasma-assisted ignition idea, the work produced a more practical and commercially viable solution. The results show that precisely optimized, low-energy pre-chamber spark ignition can significantly improve efficiency and reduce overall ownership costs for heavy-duty natural gas engines. This directly aligns with DOE goals for cleaner, more efficient, and cost-effective transportation technologies.

03 NATURAL GAS↗
DOE OSTI2025

𝐷 0 -meson-tagged jet axes difference in proton-proton collisions at $\sqrt{s}$ = 5.02 TeV

Heavy-flavor quarks produced in proton-proton (pp) collisions provide a unique opportunity to investigate the evolution of quark-initiated parton showers from initial hard scatterings to final-state hadrons. By examining jets that contain heavy-flavor hadrons, this study explores the effects of both perturbative and nonperturbative QCD on jet formation and structure. The angular differences between various jet axes, Δ⁢𝑅 axis , offer insight into the radiation patterns and fragmentation of charm quarks. The first measurement of 𝐷 0 -tagged jet axes differences in pp collisions at $\sqrt{s}$ =5.02 TeV by the ALICE experiment at the LHC is presented for jets with transverse momentum 𝑝$^{ch jet}_{T}$ ≥ 10 GeV/𝑐 and 𝐷 0 mesons with 𝑝$^{D^0}_{T}$ ≥ 5 GeV/𝑐. In this 𝐷 0 -meson-tagged jet measurement, three jet axis definitions, each with different sensitivities to soft, wide-angle radiation, are used: the standard axis, soft drop groomed axis, and winner-takes-all axis. Measurements of the radial distributions of 𝐷 0 mesons with respect to the jet axes, Δ⁢𝑅 axis−D 0 , are reported, along with the angle, Δ⁢𝑅 axis , between the three jet axes. The 𝐷 0 meson emerges as the leading particle in these jets, closely aligning with the winner-takes-all axis and diverging from the standard jet axis. The results also examine how varying the sensitivity to soft radiation with grooming influences the orientation of the soft drop jet axis and uncover that charm-jet structure is more likely to survive grooming when the soft drop axis is further from the 𝐷 0 direction, providing further evidence of the dead-cone effect recently measured by ALICE.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Resolving the Heat of Trimethylaluminum and Water Atomic Layer Deposition Half-Reactions

We report that atomic layer deposition (ALD) is a surface synthesis technique that is characterized by self-limiting reactions between gas-phase precursors and a solid substrate. Although ALD processes have been demonstrated that span the periodic table, a greater understanding of the surface chemistry that affords ALD is necessary to enable greater precision, including area- and site-selective growth. We offer new insight into the thermodynamics and kinetics of the trimethylaluminum (TMA) and H 2 O ALD half-reactions with calibrated and time-resolved in situ pyroelectric calorimetry. The half-reactions produce 3.46 and 2.76 eV/Al heat, respectively, which is greater than the heat predicted by computational models based on crystalline Al 2 O 3 substrates and closely aligned with the heat predicted by standard heats of formation. The pyroelectric thin-film calorimeter offers submilisecond temporal resolution that uniquely and clearly resolves precursor delivery and reaction kinetics. Both half-reactions are observed to exhibit multiple kinetic rates, with average TMA half-reaction rates at least 2 orders of magnitude faster than the H 2 O half-reaction kinetics. Comparing the experimental heat with published computational literature and additional first-principles modeling highlights the need to refine our models and mechanistic understanding of even the most ubiquitous ALD reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Computational tools and data integration to accelerate vaccine development: challenges, opportunities, and future directions

The development of effective vaccines is crucial for combating current and emerging pathogens. Despite significant advances in the field of vaccine development there remain numerous challenges including the lack of standardized data reporting and curation practices, making it difficult to determine correlates of protection from experimental and clinical studies. Significant gaps in data and knowledge integration can hinder vaccine development which relies on a comprehensive understanding of the interplay between pathogens and the host immune system. In this review, we explore the current landscape of vaccine development, highlighting the computational challenges, limitations, and opportunities associated with integrating diverse data types for leveraging artificial intelligence (AI) and machine learning (ML) techniques in vaccine design. We discuss the role of natural language processing, semantic integration, and causal inference in extracting valuable insights from published literature and unstructured data sources, as well as the computational modeling of immune responses. Furthermore, we highlight specific challenges associated with uncertainty quantification in vaccine development and emphasize the importance of establishing standardized data formats and ontologies to facilitate the integration and analysis of heterogeneous data. Through data harmonization and integration, the development of safe and effective vaccines can be accelerated to improve public health outcomes. Looking to the future, we highlight the need for collaborative efforts among researchers, data scientists, and public health experts to realize the full potential of AI-assisted vaccine design and streamline the vaccine development process.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Investigating Secondary Aerosol Processes in the Amazon through Molecular-level Characterization of Semi-Volatile Organics

In areas where biogenic emissions are oxidized in the presence of anthropogenic pollutants, it has become increasingly apparent that secondary organic aerosol (SOA) formation from biogenic volatile organic compounds (BVOCs) is substantially enhanced. The Amazon forest is the dominant source of BVOCs globally, and the forest is rapidly being converted to urban and agricultural uses. We participated in a collaborative field study located in the Amazon region around Manaus, Brazil, in 2014 (Green Ocean Amazon; GoAmazon). This study was designed to comprehensively examine how BVOC emissions (specifically, the most highly emitted non-methane hydrocarbon, isoprene, and lesser studied sesquiterpenes) and their interaction with anthropogenic pollution (i.e., nitrogen oxides, sulfur dioxide, and black carbon) alter the atmosphere’s oxidative capacity, influence secondary aerosol formation, atmospheric composition and, ultimately, affect the earth’s radiation balance and climate. We provide the first hourly, in-situ measurement of 30 sesquiterpenes and 4 diterpenes, roughly estimating that sesquiterpene oxidation contributes to 10-14% of ozone reactive loss by terpenes and at least 0.4–5% (median 1 %) of total submicron OA mass. However, this is likely a low-end estimate, as evidence for additional unaccounted sesquiterpenes and their oxidation products clearly exists. We also provide new perspectives on sulfate, NO x , and particle acidity influencing isoprene-derived SOA, comparing the central Amazon environment with Southeastern U.S.A. summer, representing clean to polluted conditions, respectively. We find that summed concentrations of isoprene-derived SOA tracers correlated with particulate sulfate spanning three orders of magnitude, suggesting that 1 μg m -3 reduction in sulfate corresponds with at least ~0.5 μg m -3 reduction in isoprene-derived SOA. We also find that SOA mass derived from isoprene oxidation in the presence of NO x is primarily comprised of aerosol sulfate bound with isoprene oxidation products (i.e. organosulfates), ~97% in the Amazon and ~55% in the Southeastern U.S. We infer under natural conditions in high isoprene emission regions, preindustrial aerosol sulfate was almost exclusively isoprene-derived organosulfates, which are traditionally thought as representative of anthropogenic influence. We further report the first field observations showing that particle acidity impacts the distribution of isoprene oxidation tracers in the gas and particle phases, providing physicochemical insight into isoprene SOA formation chemistry. Coupled with other co-located measurements by the DOE Atmospheric Radiation Measurement (ARM) team and collaborating PIs at our measurement site (called T3), on the G1 aircraft, and at additional field sites (T0, T1, T2) this data set has been used to understand emission, oxidation, and particle formation pathways at the molecular level, to elucidate how these pathways change when influenced by anthropogenic sources, and to evaluate their importance for the atmospheric budget of aerosols and the earth’s radiation balance on regional scales. Recommendations: Further constraint of the role of sesquiterpenes on ozone (O 3 ) reactivity and SOA formation is limited by the availability of authentic standards and synthesized compounds of sesquiterpenes and their oxidation products. Future research efforts should focus on making such standards available via custom synthesis to allow for accurate quantification and focused oxidation experiments that will fully elucidate the chemistry of these compounds in the atmosphere. Further, reductions in aerosol sulfate (via SO 2 emissions control) continues to be one of the most effective methods to reduce SOA formation from isoprene, but the concerted role of ammonia (NH 3 ) gas emissions from (agricultural) industry and other sources requires more investigation to better understand the role of aerosol acidity in SOA formation and potential controls. As GoAmazon particles can be more acidic compared to areas with greater anthropogenic NH 3 emissions, this promotes relatively greater organosulfate (OS) formation from isoprene even in the presence of NO x . Because OS and inorganic sulfate differ in water uptake properties, this implies preindustrial aerosol sulfate (albeit less abundant) may have been less reflective than current earth system models assume. Further research should investigate the radiative impacts of organic vs inorganic sulfate in aerosols to improve model representation. Finally, future work (currently underway) should include constraint of the contributions of monoterpene (C 10 H 16 ) BVOCs and biomass burning VOCs as precursors to SOA formation in the region as well as their impacts on radiative forcing in the climate system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Sputtered p-Type Cu x Zn 1– x S Back Contact to CdTe Solar Cells

As thin-film cadmium telluride (CdTe) solar cells gain prominence, one particular challenge is optimizing contacts and their interfaces to transfer charge without losses in efficiency. Back contact recombination is still significant and will prevent CdTe solar technology from reaching its full potential in device efficiency, and transparent back contacts have not been developed for bifacial solar technology or multijunction solar cells. To address these challenges, here we investigate sputtered Cu x Zn 1– x S as a p-type semi-transparent back contact material to thin-film polycrystalline CdTe solar cells at Cu concentrations x = 0.30, 0.45, and 0.60. This material is selected for its high hole conductivity (160–2120 S cm –1 ), wide optical band gap (2.25–2.75 eV), and variable ionization potential (approximately 6–7 eV) that can be aligned to that of CdTe. We report that without device optimization, CdTe solar cells with these Cu x Zn 1– x S back contacts perform as well as control cells with standard ZnTe:Cu back contacts. We observe no reduction in external quantum efficiency, low contact barrier heights of approximately 0.3 eV, and carrier lifetimes on par with those of baseline CdTe. These cells are relatively stable over one year in air, with V OC and efficiency of the x = 0.30 cell decreasing by only 1 and 3%, respectively. Using scanning electron microscopy and scanning transmission electron microscopy to investigate the Cu x Zn 1– x S/CdTe interface, we demonstrate that the Cu x Zn 1– x S layer segregates into a bilayer of Cu-Te-S and Zn-Cd-S, and thermodynamic reaction calculations support these findings. Despite its bilayer formation, the back contact still functions well. This investigation explains some of the physical mechanisms governing the device stack, inspires future work to understand interfacial chemistry and charge transfer, and elicits optimization to achieve higher-efficiency CdTe cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Assessing the thermal maturity of black shales using vitrinite reflectance: Insights from Devonian black shales in the eastern United States

Thermal maturity of source rocks indicated by vitrinite reflectance (R o ) is an important and reliable parameter to determine the petroleum potential of sedimentary basins. Originally, R o was used to characterize the degree of coalification of coals and thus works well for coal seams, but it has limitations when used to determine the thermal maturity of black shale successions. A suite of six coal-shale pairs from the Upper Devonian black shale formations in the eastern United States (New Albany Shale, Ohio Shale, Dunkirk Shale, and Rhinestreet Shale) was selected to study the applicability of R o in assessing the thermal maturity of black shale successions. The results show that vitrinite in the studied coal samples is dominated by collotelinite, whereas vitrinite in black shales occurs as small dispersed particles (~5 μm) in the mineral matrix. When comparing the size and morphology of dispersed vitrinite particles in shales and collotelinite fragments in coals, vitrinite in shales and adjacent coals should have the same origin. The measured mean random R o of vitrinite in coals ranges from 0.51–0.68%, and is 0.04–0.11% (average 0.07%) lower than that of dispersed vitrinite particles in enclosing shales. This observation contrasts with previously reported R o suppression in liptinite-rich black shales. A high standard deviation of R o measurements indicates a highly heterogeneous nature of vitrinite in black shales. Three mechanisms can be envisioned to contribute to the higher R o of dispersed vitrinite particles in black shales relative to enclosed coals. First, small vitrinite particles may become more oxidized because small particles are more frequently suspended during transport to the site of deposition and reworking of bottom sediments after deposition than large pieces of driftwood that will turn into enclosed coal lenses during burial diagenesis. Second, misidentification of zooclast (e.g., chitinozoan) fragments as vitrinite due to loss of diagnostic morphology. Third, various macerals in the vitrinite group (e.g., corpogelinite and collotelinite) may have had different original reflectance values. Based on the petrographic characteristics of vitrinite and vitrinite-like particles, caution should be applied when using the R o values of dispersed vitrinite and vitrinite-like particles in black shales as indicators of thermal maturity.

58 GEOSCIENCES↗
DOE OSTI2023

Quantifying uncertainty in high-throughput density functional theory: A comparison of AFLOW, Materials Project, and OQMD

A central challenge in high-throughput density functional theory (HT-DFT) calculations is selecting a combination of input parameters and postprocessing techniques that can be used across all materials classes, while also managing accuracy-cost tradeoffs. To investigate the effects of these parameter choices, we consolidate three large HT-DFT databases: Automatic-FLOW (AFLOW), the Materials Project (MP), and the Open Quantum Materials Database (OQMD), and compare reported properties across each pair of databases for materials calculated using the same initial crystal structure. We find that HT-DFT formation energies and volumes are generally more reproducible than band gaps and total magnetizations; for instance, a notable fraction of records disagree on whether a material is metallic (up to 7%) or magnetic (up to 15%). The variance between calculated properties is as high as 0.105 eV/atom (median relative absolute difference, or MRAD, of 6%) for formation energy, 0.65 Å 3 / atom (MRAD of 4%) for volume, 0.21 eV (MRAD of 9%) for band gap, and 0.15 μB/ formula unit (MRAD of 8%) for total magnetization, comparable to the differences between DFT and experiment. Here, we trace some of the larger discrepancies to choices involving pseudopotentials, the DFT + U formalism, and elemental reference states, and argue that further standardization of HT-DFT would be beneficial to reproducibility.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Meteoric 10Be Flux Calibration Data for the East River Watershed, Colorado, USA

This data package contains tabular and geospatial data used to quantify and model meteoric beryllium-10 fluxes in the East River watershed, Colorado, USA. The tabular component includes calibration-site data from five glacial moraine sites and includes environmental variables used to evaluate spatial controls on meteoric 10Be delivery, including elevation, mean annual precipitation (MAP), mean snow depth, and mean snow water equivalent (SWE). These site-level data were used to compare observed fluxes with environmental gradients across the watershed and to evaluate the effects of erosion correction on flux estimates. The package also includes supporting slope and curvature values used to assess topographic inputs to the erosion analysis. A second component of the data package contains updated manuscript tables and regression outputs used to summarize the relationships between meteoric 10Be flux and environmental predictors. These tables include meteoric 10Be sample information and AMS results, site-level environmental values, site-level meteoric 10Be inventory and flux values, watershed-averaged predicted fluxes, soil bulk density measurements, fine-fraction values, soil pH measurements, and regression statistics including slope, intercept, coefficient of determination, and p-value. The regression products include both standard linear regressions and regressions in which the intercept is constrained to pass through zero, and they support the analyses presented in the companion manuscript. Together, these tabular files provide the numerical basis for the manuscript tables and the regression-based interpretation of meteoric 10Be flux variability in a snow-dominated mountain watershed. The geospatial component of the package consists of GeoTIFF raster files used to generate the map products presented in Figures 2 and 6 of the companion manuscript. These rasters represent watershed-scale spatial layers for environmental variables and regression-based predictions of meteoric 10Be flux. This dataset contains comma-separated values files (.csv), Microsoft Excel files (.xlsx), GeoTIFF raster files (.tif), and upporting metadata files, including CSV data dictionaries and readme text files (.csv, .txt). The tabular files can be opened with standard spreadsheet software, and the raster files can be viewed and analyzed in GIS software such as ArcGIS Pro or QGIS. Together, these files document the numerical and spatial datasets used to calibrate and predict meteoric 10Be delivery in the East River watershed.

East River↗
DOE OSTI2022

Investigations in the tape-to-tape contact resistance and contact composition in superconducting CORC ® wires

Conductor on Round Core (CORC®) wires and cables, constructed from multiple layers of helically wound REBa 2 Cu 3 O 7–δ tapes, are a promising cable technology for high field magnet applications. An important feature of high-temperature superconductor cables is the ability to share current between conductors, allowing current to bypass drops in I c and minimizing the risk of hot spot formation, which could lead to potential burnout in the superconductor. In contrast to stacked-tape cables, which have continuous contact between tapes, in CORC® the transfer points occur at discrete tape crossovers. The tape-to-tape contact resistance, R c , plays a critical role in the current sharing capabilities and current distribution in cables. For the work reported here, special CORC® wires were manufactured using different winding parameters to investigate variations in R c . Variations comprised inclusion of a lubricant, different lubricant conductivity, inclusion of pre-tinning, and heating briefly to melt the solder. Cables were first tested as straight lengths, followed by bending to a 10 cm diameter. In straight cables R c values ranged from 1 to over 1000 μΩ cm 2 , depending on cabling parameters, with the highest values being found for cables made by the present 'standard' process. Bending the cables to a 10 cm diameter decreased R c by a factor 2–5. Tinning with PbSn decreased R c by three orders of magnitude compared to standard CORC® wires, and heat treating wires with tinned conductor resulted in only a small further decrease in R c . Based on the measured R c at an electric field of 1 μV cm –1 the resulting current transfer length between layers can range from a few millimeters to a tens of centimeters. Examination of contacts with a laser confocal microscope showed plastic deformation of the copper at the edges of the contact overlap area, apparently caused by thicker plating at tape edges digging into the copper of neighboring layers. These images reveal that only a fraction of the total contact surface may actually be touching when there is nothing to compensate for height differential. Images of the PbSn coated tapes indicated that application of solder produces a much more uniform contact surface and higher contact area. Furthermore, imaging of CORC® cross-sections confirmed that in the non-tinned cables there are many regions where tapes are not in contact, while in contrast the PbSn cable shows significantly more contact between the tapes. These different imaging techniques reveal that tape surface morphology is a significant parameter in determining R c .

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Stability, electronic quantum states, and magnetic interactions of Er 3+ ions in Ga 2 ⁢O 3

Here, we report an ab initio study of phase stability, defect formation, electronic structure, and multiple magnetic, Dzyaloshinskii-Moriya, optical, hyperfine, and crystal field interactions in erbium (Er)-doped wide band gap 𝛼- and 𝛽-gallium oxides (Ga 2 ⁢O 3 ), critically important to make a foundation for both optoelectronic and quantum information applications. The chemical, structural, mechanical, and dynamical stabilities of the pristine phases are confirmed from respective negative formation energies, negative cohesive energies, favorable elastic constants, and positive phonon frequencies. The phonon dispersions indicate that the Ga-O bonds are uniform in the 𝛼-phase, while they vary in the 𝛽-phase due to the anisotropic polyhedral movement. The defect formation energy analysis confirms that both Er-doped 𝛼- and 𝛽−Ga 2 ⁢O 3 prefer Er 3+ (neutral) state. The underestimated band gaps of the pristine phases from standard density functional theory (DFT) calculations as compared to experimental values are corrected by employing the hybrid functional calculations, resulting in the indirect band gaps of 5.21 eV in 𝛼−Ga 2 ⁢O 3 and 4.94 eV in 𝛽−Ga 2 ⁢O 3 . The site preference energy analysis indicates partial occupation of Er in the octahedral site of Ga. The anisotropic nature of hyperfine tensor coefficients of Er is similar in both phases, which may be due to the occupation of Er in the same octahedral Ga site. On the other hand, the calculated magnetic exchange interaction between two Er dopants is negative for 𝛼 and positive for 𝛽, indicating an antiferromagnetic (AFM) ground state in the former and a ferromagnetic (FM) ground state in the latter. Large values of Dzyaloshinskii-Moriya interactions (DMIs) are obtained along the 𝑥 direction in the 𝛼 and along the 𝑦 direction in the 𝛽. The large DMI may support exotic magnetic textures, a promising direction for spintronic applications. The analysis of dielectric constants and refractive indices of both pristine and Er-doped phases shows a good agreement with available experimental values. The calculated optical anisotropy is slightly higher in 𝛽 than those in 𝛼, which is due to the involvement of lower symmetry in 𝛽. The crystal field coefficients (CFCs) calculated from DFT are used to analyze 4⁢𝑓 multiplets and 4⁢𝑓 −4⁢𝑓 transitions. Thus calculated lowest energy level of the first excited state to the lowest energy level of the ground state is about 1.53 µ⁢m, which is in a good agreement with available experiments, and it falls within the quantum telecommunication wavelength range.

3-dimensional systems↗
DOE OSTI2023

6 Li-loaded liquid scintillators produced by direct dissolution of compounds in diisopropylnaphthalene (DIPN)

Here, this paper describes preparation of 6 Li-loaded liquid scintillators by methods involving direct dissolution of 6Li salts in the commercial diisopropylnaphthalene (DIPN) solvent, without the formation of water-in-oil emulsions. Methods include incorporation of 6 Li that, unlike previously reported formulations, does not require additions of water or a strong acid such as hydrochloric acid (HCl). Results of the conducted experiments show that dissolution of aromatic and aliphatic 6 Li salts in DIPN can be easily achieved at 0.1%–0.3% by weight of atomic 6 Li, using small additions of waterless surfactants, or mild carboxylic acids. An alternative way suggests incorporation of 6 Li as a part of a surfactant molecule that can be dissolved in DIPN without any solubilizing additions. Proposed methods enable preparation of efficient 6 Li-loaded liquid scintillators that, at a large scale of 50 cm, exhibit good pulse shape discrimination (PSD) properties combined with up to 107% of light output and up to 115% of the attenuation length measured relative to standard undoped EJ-309 liquid scintillator.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Perovskite/Perovskite Tandem Photoelectrodes for Low-Cost Unassisted Photoelectrochemical Water Splitting

In this project, we aim to address the challenges of achieving efficient and cost-effective unassisted photoelectrochemical water splitting using perovskite/perovskite tandem photoelectrodes. We utilized the following unique approaches to advance our innovation. (1) We developed stable and efficient low-E g (1.2 – 1.4 eV) perovskites as the bottom electrodes. We demonstrated approaches to improve the photovoltaic performance and photothermal stability of low-E g Sn-Pb iodide perovskite solar cells. (2) We developed a low-temperature synthesis route to fabricate wide-E g (>1.8 eV) perovskite top electrodes. By combining theoretical and experimental investigation, we found methods to reduce the formation of defects and dislocations in the wide-E g mixed halide perovskites and suppress halide segregation. (3) We developed a robust metal oxide-based interconnecting layer to integrate two perovskite layers into tandem photoelectrodes. Our monolithically integrated tandem devices feature a high V OC of more than 2 V and a high J SC of more than 15 mA/cm 2 . We showed the new design of the tandem photoelectrodes that is critical to the stable operation of tandem photoelectrodes for unassisted PV/PEC water splitting. (4) We demonstrated a water-impermeable barrier of carbon paste/epoxy/metal foil composite, which can prevent photocorrosion and water ingress of perovskite active layers. This surface protection enabled the operation of perovskite photoelectrodes in water and significantly enhanced the long-term stability of our tandem devices. (5) We conducted standardized PEC characterization in collaboration with NREL and reported accurate determination of solar-to-hydrogen conversion efficiencies of perovskite/perovskite tandem photoelectrodes. At the end of the project, we demonstrated perovskite/perovskite tandem photoelectrodes with STH efficiencies of up to 18% and less than 20% efficiency loss after continuous operation for more than 500 hours in water. Our results demonstrate the potential to develop a low-cost, durable, and efficient water-splitting system that meets the DOE 2026 and 2031 cost targets for hydrogen production.

08 HYDROGEN↗
DOE OSTI2024

The Curious Case of [AnH(NR 2 ) 3 ] (An = Th, U; R = SiMe 3 ): Two Monomeric Actinide Hydrides Revisited

The reaction of AnCl 4 (DME) x (An = Th, x = 2; An = U, x = 0) with 4 equiv of NaNR 2 (R = SiMe 3 ) in THF at 65 °C results in the formation of [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (An = U, 1; An = Th, 2), and not the reported monomeric actinide hydrides, [AnH(NR 2 ) 3 ], as expected. Furthermore, both complexes 1 and 2 were characterized by X-ray crystallography. Surprisingly, their unit cell parameters are remarkably close to those reported for [AnH(NR 2 ) 3 ], suggesting that the original crystals of [AnH(NR 2 ) 3 ] were, in fact, [An{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ], but were misidentified. Reduction of 1 with 1.1 equiv of KC 8 in THF, in the presence of 1 equiv of 2.2.2-cryptand, results in the formation of [K(2.2.2-cryptand)][U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (3) in good yield. Likewise, the reaction of 1 with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) results in the formation of the BAC adduct, [(BAC)U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] (4), in moderate yield. Finally, the addition of H 2 (10 bar) to 2 in C 6 D 6 at room temperature results in the formation of the targeted monomeric hydride, [ThH(NR 2 ) 3 ], in 32% yield, according to integrations against an internal standard. However, removal of the H 2 atmosphere results in rapid reformation of 2. In contrast, the addition of H 2 (10 bar) to 1 in C 6 D 6 at room temperature results in no apparent reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

ALD-Derived WO 3– x Leads to Nearly Wake-Up-Free Ferroelectric Hf 0.5 Zr 0.5 O 2 at Elevated Temperatures

Breaking the memory wall in advanced computing architectures will require complex 3D integration of emerging memory materials such as ferroelectrics─either within the back-end-of-line (BEOL) of CMOS front-end processes or through advanced 3D packaging technologies. Achieving this integration demands that memory materials exhibit high thermal resilience, with the capability to operate reliably at elevated temperatures, such as 125°C, due to the substantial heat generated by front-end transistors. However, silicon-compatible HfO 2 -based ferroelectrics tend to exhibit antiferroelectric-like behavior in this temperature range, accompanied by a more pronounced wake-up effect, posing significant challenges to their thermal reliability. Here, we report that by introducing a thin tungsten oxide (WO 3–x ) layer─known as an oxygen reservoir─and carefully tuning its oxygen content, ultrathin Hf 0.5 Zr 0.5 O 2 (5 nm) films can be made robust against the ferroelectric-to-antiferroelectric transition at elevated temperatures. This approach not only minimizes polarization loss in the pristine state but also effectively suppresses the wake-up effect, reducing the required wake-up cycles from 10 5 to only 10 at 125°C, a qualifying temperature for back-end memory integrated with front-end logic, as defined by the JEDEC standard. First-principles density functional theory (DFT) calculations reveal that WO 3 enhances the stability of the ferroelectric orthorhombic phase (o-phase) at elevated temperatures by increasing the tetragonal-to-orthorhombic phase energy gap and promoting favorable phonon mode evolution, thereby supporting o-phase formation under both thermodynamic and kinetic constraints.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Achieving Thermodynamic Stability of Single-Crystal Co-Free Ni-Rich Cathode Material for High Voltage Lithium-Ion Batteries

Ni-rich layered cathode materials are progressively considered as the standard configuration of high-energy electric vehicles by virtues of their high capacity and eliminated “range anxiety.” However, the poor cyclic stability and severe cobalt supply crisis would restrain their wide commercial applicability. Here, a cost-effective single-crystal Co-free Ni-rich cathode material LiNi 0.8 Mn 0.18 Fe 0.02 O 2 (NMF), which outperforms widely commercial polycrystalline LiNi 0.83 Co 0.11 Mn 0.06 O 2 (MNCM) and single-crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 (SNCM) is reported. Surprisingly, NMF can compensate for the reversible capacity loss under the designed conditions of high-temperature and elevated-voltage, achieving a competitive energy density compared with conventional MNCM or SNCM. Further, combining operando characterizations and density functional theory calculation, it is revealed that NMF cathode with improved dynamic structure evolution largely alleviates the mechanical strain issue commonly found in Ni-rich cathode, which can reduce the formation of intragranular cracks and improve the safety performance. Consequently, this new Co-free NMF cathode can achieve a perfect equilibrium between material cost and electrochemical performance, which not only reduces the production cost by >15%, but also demonstrates excellent thermal stability and cycling performance.

25 ENERGY STORAGE↗