Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectroscopic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Cometary NH - Ultraviolet and submillimeter emission

A description is presented of the results of computer calculations on the molecule NH, which is an important constituent of cometary comae, and a probable, but an as yet undetected, interstellar species. Attention is given to spectroscopic properties, the treatment of solar spectral data, and radiative transfer calculations. The results of calculations for the Einstein A-coefficients are given in an appendix, where the entries for the X-X and A-A transitions depend on the assumed permanent electric-dipole moment squared. Rotational-spin-Lambda-doublet energy levels used for statistical equilibrium population densities are listed in a table.

Litvak, M. M.↗

AR Pavonis - The Rosetta Stone of the symbiotics

AR Pav is considered with respect to the early history and observations, the light curve, spectroscopic properties, and recent observations. It is suggested that recent observations tend to confirm the validity of the binary model proposed for AR Pav by Thackeray and Hutchings (1974). The secondary appears as an M3 giant showing normal infrared properties. The nature of the hot primary, however, remains uncertain as it appears obscured by an accretion 'shell' both during and outside of eclipse.

Slovak, M. H.↗

Remote sensing of OH in the atmosphere using the technique of laser-induced fluorescence

The use of a laser-induced fluorescence technique for the sensitive measurement of the atmospheric hydroxyl radical is discussed. Results of laboratory studies of the fluorescence and other spectroscopic properties of OH which allow the calculation of OH concentrations from the returned signals for various altitudes, water vapor contents and temperatures are presented. The experimental setup used for airborne OH measurements is then described, with particular attention given to the use of a telescope for excitation and light collection in a coaxial configuration and the periodic tuning of the exciting radiation necessary to obtain an OH signal in the presence of strong solar and nonresonant fluorescence backgrounds. The best detection limit obtained to date with the system is noted to be about 700,000 OH/cu cm, and it is expected that, with planned improvements in detection and tuning schemes, limits in the neighborhood of 1,000,000 OH/cu cm will be achieved routinely.

Wang, C. C.↗

KQ Mon and the nature of the UX Ursa Majoris Nova-like variables

The UX Ursa Majoris stars form a group of nova-like variables with common photometric and spectroscopic properties. These objects appear to be related to the cataclysmic variables. However, there is no information that they have undergone major outbursts. The present investigation is concerned with a new object, KQ Mon, which has been included in a program of study conducted with the IUE satellite. A description of observations of KQ Mon is presented, and the relationship of this star to other UX UMa stars is examined. Attention is given to the nature of the UX Ursa Majoris stars. It is argued that the accretion rates of the UX UMa stars are higher than, for example, the dwarf novae during quiescence and that the higher accretion rates of the UX UMa stars are responsible for their lack of major outbursts.

Sion, E. M.↗

Ionized polycyclic aromatic hydrocarbons and the diffuse interstellar bands

A good case has recently been made that the unidentified infrared emission features arise from positively charged, partially hydrogenated polycyclic aromatic hydrocarbons (PAHs). In this letter it is suggested that these exceedingly stable ions are also the carriers of the diffuse interstellar bands. Although a large variety of PAH isomers is possible, the more condensed forms are substantially more stable than the less condensed forms and are expected to be dominant in the harsh interstellar environment. While neutral PAHs do not absorb in the visible, their ionized counterparts do. Because of their low ionization potential, a substantial fraction of the interstellar PAHs will be ionized. Visible spectra of the most stable PAH cations isolated in glasses are compared directly to the interstellar band spectra. Although the laboratory spectra are on an extremely compressed scale and solid state shifts are present, the comparison is favorable. Since little information is available concerning the spectroscopic properties of these species in the gas phase, a considerable amount of laboratory and theoretical work is called for to test this hypothesis.

Crawford, M. K.↗

Flux tube models of solar plages

The spectroscopic properties of model solar plages composed of narrow magnetic flux tubes embedded in undisturbed quiet sun are analyzed. The final models are magnetostatic flux tubes for which the level tau5000 = 1 level is 200 km below the same level in the quiet sun; these models are hotter than the quiet sun at all levels and expand by roughly a factor of three between this level and the quiet sun temperature minimum. These models are tested against a wide range of observational constraints. The assumed flux tube diameter is found to be an important parameter for predictions of the center-to-limb variation of the magnetically insensitive lines and of the visible continuum. A diameter of 300 km at tau5000 = 1 is necessary to give qualitative agreement with observations. A model plage consisting of the derived flux tube model embedded in a quiet sun model derived from the Ca II K line wings reproduces this line in plages at the observed value of mu; one of the models also predicts values of disk center plage contrast at 30, 50, 100, and 200 micron wavelength in good agreement with the observations of Jefferies et al. (1982).

Walton, Stephen R.↗

The IR emission features - Emission from PAH molecules and amorphous carbon particles

Given the current understanding of polycyclic aromatic hydrocarbons (PAHs), the spectroscopic data suggest that are at least two components which contribute to the interstellar emission spectrum: (1) free molecule-sized PAHs producing the narrow features and (2) amorphous carbon particles (which are primarily composed of an irregular 'lattice' of PAHs) contributing to the broad underlying components. An exact treatment of the IR fluorescence from highly vibrationally excited large molecules demonstrates that species containing between 20 and 30 carbon atoms are responsible for the narrow features, although the spectra match more closely with the spectra of amorphous carbon particles. It is concluded that, since little is known about the spectroscopic properties of free PAHs and PAH clusters, much laboratory work is required along with an observational program focusing on the spatial characteristics of the spectra.

Allamandola, L. J.↗

Effects of tensile stress on the R lines of Cr(3+) in a sapphire fiber

The spectroscopic properties of a crystalline sapphire fiber unintentionally dOed with Cr(3+) are investigated. It is found that tensile stress produces blue shifts of the R lines and changes in their radiative lifetimes and integrated intensities that can be correlated to stress-induced changes of the crystal-field parameters.

Liu, Huimin↗

Distances of Galactic WC stars from emission-line fluxes and a quantification of the WC classification

The extent to which later-type WC stars in the Galaxy show constant flux in the carbon lines is assessed. It is found the the WC stars are an extremely 'well-behaved' sequence in terms of quantitative spectroscopic properties. The two classification parameters are closely correlated with a scatter of the order of uncertainty. There appear to be natural breaks in the sequence between subclasses, except between WC5 and 6. The classification is quantified using the C IV 5808 A/C III 5696 A ratio as the principal defining parameter for WC7-9 stars and the C III 5696 A/O V 5590 A ratio as the principal defining parameter for WC4-6 stars. Preliminary calibration of the line fluxes indicate that the flux of C IV 5808 A in Galactic WC stars is constant at F(0) 5808 = -log F(0)(5808) = 8.1 at 1 kpc for subclasses WC5-7. The intrinsic line flux ratio C(0) = log f(0)(5808/4650) is a smooth function of subclass number, decreasing from -0.22 dex for WC4 stars to -0.56 dex for WC9 stars.

Smith, Lindsey F.↗

Observational constraints on interstellar dust models

No single model has been able to account for all of the observed spectroscopic properties of interstellar or circumstellar dust. The reason for this is that, despite the agreement that the grains are composed of silicaceous/metal oxide and carbonaceous material, there is strong disagreement as to their exact structure and composition. This led Draine and Lee (1984) to use interstellar extinction data to define an interstellar graphitic material; new observational findings have made even that identification uncertain. But the great advantage of their approach is that they used observations at all of the wavelengths available to define the material. Here, the authors attempt a variation of that approach. They examine recent UV and IR data and attempt to put constraints on the possible types of interstellar grain composition, and to connect these constraints with grain models. A summary of some of the important constraints imposed by the observations is given.

Hecht, James H.↗

Chemical transport during formation and alteration of Martian impact and volcanic deposits

Much of the surface of Mars, including volcanic and cratered terrains, probably experienced alteration and degassing processes. These processes may have depleted or enriched many important elements in surface materials, including bedrock, dust, and soils. The composition of the martian soil may represent the best estimate, for some elements, of the average composition of the martian crust, similar to the composition of loess created by glacial action on the Earth. The martian soil may represent the only convenient, globally or regionally averaged sample of the martian crust. In order to understand the composition of the source material for the soil, however, we need to understand the contributions of volcanic vs. impact sources for this material and the chemical fractionations involved in its production. The processes to be addressed include degassing of volcanic deposits, as observed in the Valley of Ten Thousand Smokes at Katmai, Alaska, and degassing of meltbearing impact ejecta as inferred for suevite ejecta sheets at the Ries Crater, and alteration or palagonitization of volcanic deposits, as documented for volcanos in British Columbia and many other volcanic terrains, and impact crater deposits. The process of palagonitization has been the subject of several studies with reference to Mars, and palagonite is a good analogue for the spectroscopic properties of the martian dust. The role of impact in cratering has not been as well studied, although other researchers have established that both degassing and alteration are common features of impact crater deposits. Other relevant sources of experimental data include the extensive literature on the corrosion of nuclear waste glass and leaching of shocked materials.

Newsom, H. E.↗

MODTRAN3: An update and recent validations against airborne high resolution interferometer measurements

MODTRAN, the Moderate Resolution Atmospheric Radiance and Transmittance Model, encompasses all the capabilities of LOWTRAN 7, the widely used 20 cm(exp -1) resolution radiance code, but incorporates a much more sensitive molecular band model with 2 cm(exp -1) resolution. MODTRAN contains many important elements that other band model based radiative transfer codes do not incorporate. It shares with FASCODE: spherical geometry, single and multiple scattering default atmospheric profile descriptors (gases, aerosols, clouds, fogs, and rain), and molecular continua (H2O, CO2, O3, O2, N2). In addition, it can calculate the solar/lunar direct and scattered radiation. MODTRAN3 was released to the general public in November 1994. It has several important features that the previous version, MODTRAN2, does not have. Chloro-fluorocarbon (CFC) and related heavy molecules (whose spectroscopic properties first appear on the HITRAN92 data base as temperature-dependent cross sections) have been incorporated into pseudo-band models, with provision for using both default and user supplied profiles. The addition of SO2 and O2 in the UV, along with upgraded ozone Chappuis bands in the visible is also part of MODTRAN3. An improved multiple scattering algorithm, the DIScrete Ordinate Radiative Transfer (DISORT) has also been incorporated into MODTRAN3. MODTRAN is very fast: simple timing runs of MODTRAN3 vs. FASCOD3 show an improvement of more than a factor of 100 for a typical 500 cm(exp -1) spectral interval and comparable vertical layering. Speed is an important consideration in heating/cooling rates calculations, where a large number of radiative transfer calculations are needed. The MODTRAN3 used in this study is based on HITRAN92, but as mentioned, above, it will be upgraded to HITRAN94 upon its release at the end of 1994. MODTRAN has been adopted by: some researchers in the AVIRIS program as one radiative transfer code to derive surface reflectance from AVIRIS measurements. The accuracy of the code is very important because any errors in the radiative transfer calculation will directly translate into errors in the derived surface reflectance. In this paper, the new solar irradiance calculated by Kurucz, which is adopted in MODTRAN3, will be presented. Recent validations of MODTRAN3 with airborne high resolution interferometer measurements over ocean will be discussed. Good agreeement between model calculations and measurements was achieved.

Anderson, Gail P.↗

Spectroscopic Investigation of Ce(3+) Doped Fluoride Crystals

Doping of the trivalent rare-earth cerium ion into fluoride crystals is of interest in producing turnable ultra-violet solid state lasers. These lasers are desirable for many applications in medicine, industry, and scientific research, including remote sensing. High absorption and stimulated emission cross sections of the dipole allowed 4f-5d transitions show promise in cerium as a laser ion in crystals. Several research groups have already reported the observation of stimulated emission of cerium in LiYF4, LiSrAlF6, and LiCaAlF6. However, the color center formation in the crystals due to the excited state absorption of ultra-violet pump light adds difficulty to achieving laser action. We have investigated the spectroscopic properties of cerium such as absorption and emission spectra, and lifetimes in four different fluoride crystals, including LiCaAlF6, LiSrAlF6, KyF4 and LiYF4. We have derived the polarized absorption and stimulated emission cross sections from transmission and fluorescence emission measurements for each of the host crystals. we have measured the lifetime of the lowest 5d level; moreover, investigated the temperature dependence of this lifetime and color center formation. Our results on absorption and stimulated emission cross sections for LiCaAlF6 and LiSrAlF6 are similar to the results already published.

Reinhart, Donald H.↗

Raman and Photoluminescence Spectroscopy of Er(3+) Doped Heavy Metal Oxide Glasses

The potential applications of rare-earth ion doped materials include fiber lasers which can be pumped conveniently by infrared semiconductor laser diodes. The host material systems most widely studied are fluoride crystals and glasses because fluorides have low nonradiative relaxation rates due to their lower phonon energies. However, the mechanical strength, chemical durability and temperature stability of the oxide glasses are generally much better than fluoride glasses. The objective of this research was to investigate the optical and spectroscopic properties of Er(3+)-doped lead-germanate and lead-tellurium-germanate glasses. The maximum vibrational energy of lead-tellurium-germanate glasses are in the range of 740-820/cm, intermediate between those of silicate (1150/cm) and fluoride (530/cm) glasses.

Dyer, Keith↗

Observational Research on Star and Planetary System Formation

Institute scientists collaborate with a number of NASA Ames scientists on observational studies of star and planetary system formation to their mutual benefit. As part of this collaboration, SETI scientists have, from 1988 to the present: (1) contributed to the technical studies at NASA Ames of the Stratospheric Observatory for Infrared Astronomy (SOFIA), an infrared 2.5 meter telescope in a Boeing 747, which will replace the Kuiper Airborne Observatory (KAO), a 0.9 meter telescope in a Lockheed C-141. SOFIA will be an important facility for the future exploration of the formation of stars and planetary systems, and the origins of life, and as such will be an important future facility to SETI scientists; (2) worked with the Laboratory Astrophysics Group at Ames, carrying out laboratory studies of the spectroscopic properties of ices and pre-biotic organics, which could be formed in the interstellar or interplanetary media; (3) helped develop a photometric approach for determining the Frequency of Earth-Sized Inner Planets (FRESIP) around solar-like stars, a project (now called Kepler) which complements the current efforts of the SETI Institute to find evidence for extraterrestrial intelligence; and (4) carried out independent observational research, in particular research on the formation of stars and planetary systems using both ground-based telescopes as well as the KAO.

Simpson, Janet P.↗

Composition and Origin of Martian Surface Material, Remote Detection of Minerals, and Applications to Astrobiology

Martian surface composition and processes are under study through analysis of spectral, magnetic and chemical data from Mars and analysis of laboratory analog materials. The focus of this study is on potential lander/rover measurements of weathered volcanic tephra and hydrothermal rocks because these samples resulted from processes that may have occurred on Mars. Fine-grained particles from these sources may be responsible for origination of the dust/soil on Mars that is shaping the planet's surface character. Alteration on the surface of Mars likely includes both chemical and physical interactions of soil particles and rock surfaces. Many of the minerals present in hydrothermal samples may be associated with organisms and may be useful as indicators of life or environments supportive of life on Mars. Characterization of the spectroscopic properties in the visible/near-infrared (VIS/NIR) and mid-infrared (IR) regions using reflectance, emittance and Raman, as well as the thermal properties of minerals thought to be present on Mars are being performed in order to identify them remotely. Particular interest is directed toward locating minerals, and hence landing sites, important to Astrobiology.

Bishop, J. L.↗

"Dust Devils": Gardening Agents on the Surface of Mars, and Hidden Hazards to Human Exploration?

Dust devils are familiar sites in the and regions of the world: they can produce quite spectacular displays of dust lofting when the vortices scavenge very loose dust from a dry lake bed or from recently disturbed agricultural fields. If one were to arrive at the center of an arid region, take one photograph, or even a series of photographs over a period of several days, then return the images for laboratory analysis, it would be most likely concluded that the region was inactive from an aeolian perspective. No images of general dust movement were obtained, nor were any dust devils "caught on camera" owing to their ephemeral and unpredictable appearance, and the fact that there was deceptively little residue of their actions. If, however, a camera were to take a 360 degree continuous recording over a period of a year, and the film were then to be shown at high speed over a period a several minutes, the impression might be that of a region ravaged by air vorticity and dust movement. Extrapolate this over geological time, and it is possible to visualize dust devils as prime aeolian agents, rather than insignificant vagaries of nature, On Mars, the thin atmosphere permits the surface of the planet to be heated but it does not itself retain heat with the capacity of the earth's atmosphere. This gives rise to greater thermal instability near the surface of Mars as "warm" air pockets diapiritically inject themselves into higher atmospheric layers. Resulting boundary-layer vorticity on Mars might therefore be expected to produce dust devils in abundance, if only seasonally. The spectacular images of dust devils obtained by Pathfinder within its brief functional period on the planet testify to the probability of highly frequent surface vorticity in light of the above reasoning about observational probability. Notably, the Pathfinder devils appeared to be at least a kilometer in height. There are several consequences for the geology of Mars, and for human exploration, if dust devils are to be expected in reasonable abundance. First, from a geological perspective, the vortices will act as "gardening" agents for the top few centimeters of entrainable material. Over time (hundreds of millions, or billions of years being available), they will cover the surface with scouring paths, and the grain sizes that can be lofted by a vortex probably extends over the whole sand to dust range. The depositional paths are, of course, much larger, so that vortex-induced deposition is more widespread than vortex-induced erosion, and will without doubt, affect the whole region in which the dust devils occur (this might explain why rocks at the Viking site seemed oddly capped with dust in a region apparently subject to general aeolian scouring). On Mars, the lift forces in dust devils might be less than on earth owing to the much thinner atmosphere, but this may be counterbalanced by lower gravity and greater vortex velocities. Certainly, when active, other aeolian phenomena on Mars --sand motion and dust storms, seem no less energetic and no less capable of lofting sediments than equivalent terrestrial aeolian phenomena. Every several years, within the current climatic regime, the surface of Mars is subject to light dust fall from global dust storms. Over time, this should develop a very uniform surface layer, with commensurate uniformity in grain size, mineralogy, albedo, color, and general spectroscopic properties. Dust devils will disturb this situation by continually mixing the surface dust with underlying layers, perhaps composed of silt and sand. This size mixing will also involve compositional mixing. After some years, the thin layer of dust that may be difficult to entrain alone, becomes progressively mixed with coarser materials that could reduce the general aeolian threshold of the soil. Certainly the continual disturbance by vorticity will prevent surface stabilization that may bind or indurate grains (caused by slow cementation or ice welding at grain boundaries). If dust devils continually loft dust to kilometer heights, and the dust is sprayed into many cubic kilometers of atmosphere each time, could the devils produce a continual background of atmospheric dust that might be mistaken for the fallout of a distant large-scale dust storm? From a human exploration perspective, dust devils are unlikely to pose any, life- threatening situation for an astronaut unfortunate enough to encounter a momentary swirling cloud of loose soil. However, it is noted that pervasive dust is probably one of the greatest long-term hazards for a human encampment. The fineness and penetration capabilities of the dust, its electrostatic adhesive properties, and its complete ubiquity, render the material a persistent nuisance at best, but at worst, over a period of many months it is possible that space suits, machinery, habitat interiors, air filters, and so forth, could become jeopardized. Owing to dust penetration, the space suits used in the Apollo landings were rendered unusable after a few EVA activities. There will be a definite attempt to situate a human colony on Mars in an area that is far removed from the regions of the planet known for being the centers of major dust storms. At the heart of these storm systems, the dust lofting mechanics are unknown, but they are energetic and perhaps potentially life-threatening for an astronaut. Locating a colony in a region that appears from space to be meteorologically benign may lead to colony placement in a region prone to dust devils, but dust devils are not (or have not been) detectable from orbital observations: the region surveyed for placement will appear like the apparently inactive and area referred to earlier. The region may be spared from highly energetic weather systems, but it may not be necessarily immune from continual dust disturbance. Additional information is contained in the original.

Marshall, J.↗

A Study of Soil and Duricrust Models for Mars

This project includes analysis of the Mars Pathfinder soil data (spectral, chemical and magnetic) together with analog materials and the products of laboratory alteration experiments in order to describe possible mechanisms for the formation of soil, duricrust and rock coatings on Mars. Soil analog mixtures have been prepared, characterized and tested through wet/dry cycling experiments for changes in binding and spectroscopic properties that are related to what could be expected for duricrusts on Mars. The smectite-based mixture exhibited significantly greater changes (1) in its binding properties throughout the wet/dry cycling experiments than did the palagonite-based mixture, and (2) in its spectral properties following grinding and resieving of the hardened material than did the palagonite-based mixture.

Bishop, Janice L.↗