Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specific surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Facet-Dependent Adsorption of Pb(II) on Hematite (001), (116), and (104) Surfaces

Hematite’s common (001) and (012) facets are frequently used in model studies of lead (Pb) adsorption behavior, but there is a lack of research on the high-energy facets, e.g. (104), present in nature. Also, few studies have attempted to connect the molecular details of facet-specific Pb adsorption to macroscopic uptake behavior. Here, to address these knowledge gaps, we investigated Pb(II) adsorption behaviors on facet-engineered hematite nanoparticles dominated by (001), (104), and (116). Adsorption experiments revealed significant variations in Pb(II) uptake among the three samples, with (001) demonstrating the highest capacity and (116) showing the best adsorption efficiency when normalized to specific surface area. Adsorption kinetics followed the pseudo-second-order model, indicating the adsorption process is governed mostly by chemisorption. Adsorption isotherms were well fitted by the Langmuir model, indicating uptake proceeds until roughly monolayer adsorption. Detailed characterization revealed Pb(II) was adsorbed as single atoms with complex inner-sphere binding modes that varied across different facets, indicating adsorption is both structurally and energetically facet-dependent. Co-adsorption experiments further demonstrated Cu 2+ , Zn 2+ , and humic acid significantly promoted Pb(II) adsorption. This study advances the understanding of hematite surface reactivity in controlling macroscopic wet adsorption behaviors, providing valuable insights into the environmental fate of Pb(II).

Contaminant removal↗
DOE OSTI2026

Modeling Flow and Mass Transfer within Hollow Fiber Packaging for Gas Separation

Hollow fiber membrane modules are used for gas purification by their selective permeation properties. Intensification of the process to minimize the retentate loss and gas pressure involves optimization at various scales. In this work, we outline a numerical investigation of the gas separation performance at the scale of fiber bundles and its impact on module performance. Flow channeling and anisotropy govern the mass-transfer coefficient in axial and cross-flow configurations. These effects are quantified in terms of a permeability tensor or an anisotropy ratio and the effective mass-transfer coefficient or the Sherwood number. The results show a trade-off between purification and recovery. While smaller fibers offer a large specific surface area to enable high purification, it comes at a huge penalty on the separation performance due to reduced penetration within bundles. Optimum performance indicators are emphasized.

Fibers↗
DOE OSTI2026

Breaking the Energy Barrier of Heavy Metal Ion Diffusion in Micropores with Mesoporous 3D Graphene for Fast and Efficient Cu2+ Removal

Efficient removal of heavy metals from water critically depends not only on adsorption capacity but also on ion diffusion kinetics and the associated energy barriers. In conventional carbon adsorbents, severe diffusion confinement within micropores restricts ion transport, resulting in sluggish adsorption kinetics and large apparent activation energies despite high specific surface areas. Here, we demonstrate that this fundamental limitation is overcome by engineering meso/macroporous architectures in the 3D graphene materials synthesized via our discovered alkali-metal reactions with\\\\r\\\\n2\\\\r\\\\nCO. The unique 3D graphene materials possess defect-rich graphene frameworks with interconnected meso/macroporous networks, exhibiting simultaneously high surface area and greatly enhanced meso/macropore volume that enable efficient access to adsorption sites. As a result, the Cu2+ adsorption on 3D graphene proceeds with very low activation energies (4.98 kJ mol–1), which is almost 4 times smaller than on activated carbon (23.1 kJ mol–1). This finding offers a promising platform for efficient and sustainable water purification.

25 ENERGY STORAGE↗
DOE OSTI2022

Electrostatic Asymmetry of Wurtzite Nanocrystals and Resulting Photocatalytic Properties

Efficient light absorption and high energy of charge carriers of zinc cadmium sulfide (ZCS) make this semiconductor attractive for many photocatalytic reactions. Despite marked successes in shape-controlled synthesis of ZCS central to their photocatalytic performance, recombination of charge carriers as they migrate through the nanoscale particles results in losses of excitation energy, markedly reducing the photocatalytic activity of ZCS and other heterogeneous photocatalysts. Here, in this study, we show that the electrostatic asymmetry of nanostructures, previously discovered for nearly spherical nanoparticles, also manifests in wurtzite ZCS with planar geometry. The electrostatic asymmetry assists charge separation and substantially increases the yield of photocatalytic reactions in monocrystalline ZCS. The synthesized ZCS nanorods and nanoplates with identical chemical composition were found to have markedly different photocatalytic activity for evolution of hydrogen in water. Despite much smaller specific surface areas, the ~500 nm wide nanoplates displayed a hydrogen evolution rate 12 times higher than the ~35 nm long nanorods, also outperforming other ZCS photocatalysts. Experimental and computational data indicate that the homo- and heterojunction-free ZCS nanoplates with continuous wurtzite lattice behave essentially as nanoscale dipoles with intrinsic dipole moment as high as 48.39 D per unit cell. Electric-field-directed migration of charge carriers stimulates their localization on opposite parts of the nanoplates. Direct imaging of the intraparticle electrical field using off-axis electron holography confirmed their electrostatic asymmetry. Polarization-enhanced charge separation provides a new pathway to efficient and stable photocatalysts for sustainable energy technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab Initio Dynamics of Graphene and Graphyne Electrodes in Vacuum and in the Presence of Electrolytes

Graphene and graphyne electrodes are both relevant for electrochemical energy storage applications due to their unique physical, chemical, and electronic properties. Graphyne has been considered even more attractive than graphene due to its larger specific surface area, greater electronic mobility, and intrinsic band gap. The analyses presented in this work reveal relevant features of graphyne in an interaction with an electrolyte that can be useful for practical applications. Although there is already a considerable volume of work on graphyne, the analysis of its properties taking into account the dynamics of its network and the interaction with the condensed medium has not yet been presented. Here, ab initio molecular dynamics simulations were performed to study the energetic, structural, spectroscopic, and electronic properties of graphene and graphyne electrodes in vacuum and in the presence of an electrolyte (EMIM-BF 4 ). A detailed analysis of the electrode–electrolyte interaction is reported for both systems. Structural features are presented in terms of both radial and spatial distribution functions and angular orientation distributions. Power spectral analyses and molecular orbital maps provided important insights into the intermolecular interactions in graphene and graphyne systems, describing the main differences as well as revealing similarities between them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tailoring Nanoporous Silica and Natural Straw Structural Insulation Composites

Nanoporous silica exhibits ultralow thermal conductivity as a result of its nanoscale pore size, high pore volume, and specific surface area. In this study, we report the self-assembled surfactant-templated synthesis of nanoporous silica, which is integrated with cellulose fibers derived from natural straw to manufacture high thermal insulation and mechanically robust nanocomposites. The nanocomposite shows a low thermal conductivity of 22.5 mW/(m·K), a compressive modulus of 0.93 MPa, and a hydrophobicity with a water contact angle of 125°. Moreover, we observed a marked reduction in water absorption capacity and a carbon footprint of 0.21 kg CO 2 equiv/kg. Here, this study provides a pathway toward the development of nanoporous structural insulation materials for energy-efficient building applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Gaseous Iodine Sorbents: A Comparison between Ag-Loaded Aerogel and Xerogel Scaffolds

The general properties of aluminosilicate aerogels and xerogels with silver nanoparticles as sorbents for capturing iodine gas [I2(g)] were investigated. The structures, morphologies, compositions, and pore structures of aerogel and xerogel were compared using powder X-ray diffraction (PXRD), scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, as well as specific surface area (SSA) and pore size analyses. The as-made aerogels, xerogels, and heat-treated aerogels were impregnated with Ag by aqueous ion exchange using AgNO3 solutions, and PXRD patterns showed the presence of nanocrystalline Ag0 after Ag-impregnation. Iodine loadings of aerogels and xerogels were 0.33–0.41 g g-1. The Ag-impregnated aerogels without heat-treatment showed an 8 mass% higher iodine loading than Ag-impregnated xerogels and 3 mass% higher than heat-treated Ag-impregnated aerogels. All gels after iodine uptake showed the presence of AgI, indicating chemisorption of iodine to silver. The SSA values of the as-made gels were 419–598 m2 g-1 but decreased significantly to 34–120 m2 g-1 after Ag-impregnation and iodine uptake processes. Overall, changes in physical and chemical properties of aerogels and xerogels after iodine uptake were similar, and the difference in iodine loading capacities of the aerogels and xerogels was not significant while the synthesis process of xerogel is more practical because it does not require supercritical drying.

aerogel, xerogel, iodine capture↗
DOE OSTI2022

Stability Enhancement and Microstructural Modification of Ni-Rich Cathodes via Halide Doping

In this study, elemental doping is an effective strategy to modify surface and bulk chemistry in NMC cathode materials. By adding small amounts of lithium halide salts during the calcination process, the Ni-rich NMC811 cathode is doped with Br, Cl, or F halogens. The dopant type has a significant impact on the lithiation process and heavily influences the final cathode porosity and surface morphology. Utilizing a variety of electrochemical, surface, and bulk characterization techniques, it is demonstrated that an initial content of 5 mol % LiBr or LiCl in the lithium source is effective in improving capacity retention while also providing excellent rate performance. The improvements are attributed to a substantial increase in specific surface area, the formation of a stable cathode electrolyte interface (CEI) layer, and suppressed surface reconstruction. In addition, the particle microstructure is better equipped to handle cyclic volume changes with increased values of critical crack lengths. Overall, it is demonstrated that anion doping via the addition of lithium halide salts is a facile approach toward Ni-rich NMC modification for enhanced cathode performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Bimetallic Metal–Organic Framework Fe/Co-MIL-88(NH 2 ) Exhibiting High Peroxidase-like Activity and Its Application in Detection of Extracellular Vesicles

Metal–organic frameworks (MOFs) have many attractive features, including tunable composition, rigid structure, controllable pore size, and large specific surface area, and thus are highly applicable in molecular analysis. Depending on the MOF structure, a high number of un-saturated metal sites can be exposed to catalyze chemical reactions. In the present work, we report that by using both Co(II) and Fe(III) to prepare the MIL-88(NH 2 ) MOF, we can produce the bimetallic MOF that can catalyze the conversion of 3,3', 5,5"-tetramethylbenzidine (TMB) to a color product through reaction with H 2 O 2 at a higher reaction rate than the monometallic Fe-MIL-88(NH 2 ). The Michaelis constants (K m ) of the catalytic reaction for TMB and H 2 O 2 are 3-5 times smaller, and the catalytic constants (k cat ) are 5-10 times higher than those of the horse-radish peroxidase (HRP), supporting ultrahigh peroxidase-like activity. These values are also much more superior to those of the HRP-mimicking MOFs reported previously. Interestingly, the bimetallic MOF can be coupled with glucose oxidase (GOx) to trigger the cascade enzymatic reaction for highly sensitive detection of extracellular vesicles (EVs), a family of important biomarkers. Through conjugation to the aptamer that recognizes the marker protein on EV surface, the MOF can help isolate the EVs from biological matrices, which are subsequently labeled by GOx via antibody recognition. The cascade enzymatic reaction between MOF and GOx enables detection of EVs at a concentration as low as 7.8 × 10 4 particles/ml. Further, the assay can be applied to monitor EV secretion by cultured cells, and also can successfully detect the different EV quantities in the sera samples collected from cancer patients and healthy controls. Overall, we prove that the bimetallic Fe/Co-MIL-88(NH 2 ) MOF, with its high peroxidase-activity and high biocompatibility, is a valuable tool deployable in clinical assays to facility disease diagnosis and prognosis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

3D Morphology of Bimodal Porous Copper with Nano-Sized and Micron-Sized Pores to Enhance Transport Properties for Functional Applications

Multiscale porous metals with multiscale porosity from nanometer to micrometer have a high specific surface area and high effective diffusivity for ion transport, thereby enhancing functionalities and extending the applications of porous metals. Herein, the Cu–Fe–Al ternary system was selected as the precursor alloy to construct multiscale, bimodal porous copper by the chemical dealloying method. The effect of the phase composition and initial microstructure of precursor alloys (Al x Fe 75– x Cu 25 , x = 10–60) on the three-dimensional (3D) morphology of multiscale porous metals was systematically investigated, with a goal to precisely control the multiscale porous structure. The four crystal structure phases (body-centered cubic (BCC), face-centered cubic (FCC), CsCl type (B2), and monoclinic) in precursor alloys were analyzed by synchrotron X-ray diffraction refinement. The 3D morphology, feature size distribution, and tortuosity of four representative porous Cu after dealloying Al x Fe 75– x Cu 25 ( x = 10, 30, 50, and 60) precursor alloys were directly visualized and quantified via advanced synchrotron X-ray nanotomography. The relationship between the phases/crystal structures of precursor alloys and their corresponding porous morphology was established: the micron-sized pores in bimodal porous Cu are formed by dissolving the CuFeAl phase with BCC and monoclinic crystal structures, and the nano-sized pores are formed by dealloying the CuFeAl phase with FCC and B2 crystal structures. The size of the nanoporous structure depends on the ratio between the more noble and more active components in the precursor alloy, while the size of the microporous structure depends on the corresponding phase size in the precursor alloy. The tortuosity results showed that the multiscale porous structure with both nanoporosity and microporosity exhibits lower tortuosity, which will enhance transport properties for functional applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Nanoengineering Porous Silica for Thermal Management

Thermal insulation of solid materials originates from the nanoscale porous architectures to regulate thermal management in energy-critical applications from energy-efficient buildings to heat-sensitive energy devices. Here, we show nanoengineering of porous silica materials to control the architecture transition from mesoporous to nanocage networks. A low thermal conductivity of such a porous silica network is achieved at 0.018 W/(m K) while exhibiting a porosity of 92.05%, specific surface area of 504 m 2 /g, and pore volume of 2.37 cm 3 /g after ambient pressure drying. Meanwhile, the crosslinking of the porous silica and ceramic fiber frameworks show a tensile Young’s modulus of 2.8 MPa while maintaining high thermal insulation, which provides an effective thermal runway mitigation strategy for rechargeable lithium-ion batteries. Furthermore, the nanoengineering strategy reported here would shed light on achieving superthermal insulation of nanostructures for energy-critical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Silver-Loaded Xerogel Nanostructures for Iodine Capture: A Comparison of Thiolated versus Unthiolated Sorbents

Here this paper describes the development and provides comparisons of thiolated (-SH) and unthiolated Ag-Al-Si-O xerogels for iodine gas capture. These xerogels were produced from alkoxides and then heat-treated at 350 °C to provide mechanical strength for subsequent processing steps. Then, a portion of the xerogels was thiolated using (3-mercaptopropyl)trimethoxysilane. Next, thiolated and unthiolated batches were ion-exchanged in AgNO 3 solutions where Ag + replaced Na + in the gel network on a near 1:1 molar basis. Subsamples of the Ag-exchanged xerogels were subjected to a reduction step in H 2 /Ar to convert Ag + to Ag 0 where the rest of the Ag-exchanged (Ag + ) were not reduced. X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy revealed nanoscale Ag 0 in the Ag + samples despite no active reduction where actively reduced samples had bimodal Ag 0 distribution of ~2-3 nm hexagonal and ~6-7 nm cubic crystallites. Synchrotron X-ray absorption spectroscopy was used to assess the oxidization states of Ag, S, and I within the different xerogel samples. The specific surface areas of the base xerogels decreased as subsequent treatments were performed on the as-made samples, albeit the decreases were smaller than aerogel equivalents of these samples from a previous study. All iodine-loaded Ag-based samples showed a mixture of β-AgI and γ-AgI. Comparisons of iodine-loading results with other Ag-based iodine sorbents show that the thiolated Ag 0 -xerogels in this work have one of the highest iodine-loading capacities (q e ) reported to date in saturated conditions with the thiolated Ag 0 -xerogel showing 522 mg iodine per g of the sorbent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

MXene Nanosheets Functionalized with Cu Atoms for Urea Adsorption in Aqueous Media

Ti 3 C 2 T x MXene is an emerging family of two-dimensional materials, and because of its large specific surface area, it has potential for many applications. Herein, a new application using Cu-doped MILD (minimally intensive layer delamination) synthesized Ti 3 C 2 T x MXene for urea removal is demonstrated. The doping of Cu on MXene results in an increase in its affinity for urea adsorption as compared to the pristine MILD synthesized MXene due to the formation of the Cu–urea complex. Previous computational studies have shown that the adsorption energies of urea on the MXene surface can be improved in the presence of Cu. The valence state of Cu in the doped MILD synthesized MXene, which binds on to the surface via Ti–O–Cu linkage, is between 0 and +1 as verified by XAS and XPS. As the optimal urea adsorption occurs on Cu as a single atom site, an increase in Cu doping on MXene does not increase urea removal due to Cu agglomeration. Furthermore, looking at the adsorption behaviour, it seems that Cu-doped MXene follows the monolayer adsorption on homogenous surface model.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites

Cellulose nanofibrils (CNFs) are a promising reinforcement for biodegradable composite matrices such as poly(lactic acid) (PLA), but they require commercially scalable drying methods that preserve their fibrillar morphology along with improved interfacial interactions with polymer matrices. In this work, a water-based grafting-through polymerization scheme to modify CNFs improved spray drying behavior and reinforcement capacity in PLA composites. All polymer modifications yielded CNFs with a more fibrillar morphology after spray drying, increasing specific surface area by up to 490% compared to unmodified CNFs, values similar to conventional freeze drying. Polymer-grafted CNFs in PLA composites improved the tensile strength by 16% at 20 wt % loading and stiffness by 22% at a 10 wt % loading with two different graft-polymer chemistries compared to unmodified CNF composites. Surface energy heterogeneity measurements of the reinforcements and PLA matrix were employed to understand the improvements in composite properties. Polymer modifications lowered the total surface energy of the CNFs, and calculated ratios of work of adhesion to work of cohesion suggested improved interfacial compatibility for four of the modified CNFs with PLA. Rheological oscillatory shear studies of the composites correlated solid-like melt behavior, as demonstrated by storage moduli dominance, with higher tensile strength. Thermal analysis of the composites revealed that excessive plasticization by the poly(oligoethylene glycol methyl ether methacrylate)-grafted sample potentially offset mechanical property improvements imparted by the more fibrillar morphology. This work provides an opportunity for large-scale manufacturing of CNF/PLA composites via an entirely aqueous modification scheme and industrially relevant spray drying process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Deep Understanding of Strong Metal Interface Confinement: A Journey of Pd/FeO x Catalysts

Tuning the atomic interface configuration of noble metals (NMs) and transition-metal oxides is an effective straightforward yet challenging strategy to modulate the activity and stability of heterogeneous catalysts. Herein, Pd supported on mesoporous Fe 2 O 3 with a high specific surface area was rationally designed and chosen to construct the Pd/iron oxide interface. As a versatile model, the physicochemical environments of Pd nanoparticles (NPs) could be precisely controlled by taming the reduction temperature. The experimental and density functional theory calculation results unveiled that the catalyst in the support–metal interface confinement (SMIC) state showed significantly enhanced catalytic activity and sintering resistance for CO oxidation. The constructed Fe sites at the interfaces between FeO x overlayers and Pd NPs not only provided additional coordinative unsaturated ferrous sites for the adsorption and activation of O 2 , thereby facilitating the activation efficiency of O 2 , but also impressively changed the reaction pathway of CO oxidation. As a result, the catalyst followed the Pd/Fe dual-site mechanism instead of the classical Mars–van Krevelen mechanism. For the catalyst in the strong metal–support interaction (SMSI) state, its catalytic activity was seriously suppressed because of the excessive encapsulation of the active Pd sites by FeO x overlayers. Thus, the present study therefore provides detailed insights into the SMIC and SMSI in ferric oxide-supported Pd catalysts, which could guide the preparation of highly efficient supported catalysts for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Restructuring of the Lewis Acid Sites in Y-Modified Dealuminated Beta-Zeolite by Hydrothermal Treatment

Yttrium-modified dealuminated Betazeolite (Y-BEA) represents a type of Lewis acid zeolite that has gained attention for its potential to efficiently catalyze the conversion of biomass-derived oxygenates. The structure of the Y active sites and their dynamics during biomass conversion reactions, which normally involve substantial amounts of water, necessitate thorough investigation for the rational design of more active and stable catalysts. Here, we conducted a study where a series of Y-BEA catalysts with different yttrium loadings (1–7 wt.%) were subjected to hydrothermal treatment (450 °C, 20% water) and investigated for their structural and catalytic activity changes through a combination of multiple characterizations and kinetic measurements. The number of acid sites of Y-BEA decreased without a change in acid strength following the hydrothermal treatment, which was confirmed by the results of acid site titration, infrared spectroscopy of probe molecules, and kinetic measurements for probe reactions (acetone aldol condensation). Structural analysis using X-ray diffraction (XRD), specific surface area measurement, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS) demonstrated that both the zeolite structure and the isolation status of the Y site remain intact after hydrothermal treatment. Further, the Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) spectra, thermogravimetric analysis (TGA), and operando 1 H and 29 Si magic-angle spinning (MAS) nuclear magnetic resonance (NMR) revealed the dehydroxylation of Y-BEA induced by hydration-rearrangement-condensation restructuring during the high-temperature steam treatment. Dehydroxylation affects the structure of Y sites by reducing their vicinal silanol sites. In conclusion, this conversion of Lewis acidic Y sites into nonacidic sites is the primary factor behind the change in acid site quantity and catalytic activity on Y-BEA.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Simultaneous Insight into Dissolution and Aggregation of Metal Sulfide Nanoparticles through Single-Particle Inductively Coupled Plasma Mass Spectrometry

Nanoparticles (NPs) and their colloidal aggregates are ubiquitous and play important roles in the transport and release of metals. Knowledge of their dissolution rates and aggregation behavior in solution are crucial for better prediction of their fate in biogeochemical cycling, ecotoxicity, and environmental remediation. There are however significant technical challenges to accurately obtain such information as a result of the heterogeneity and highly dynamic transformation exhibited by NPs, particularly at relatively low particle concentrations in aqueous systems. Here, we quantitatively examine the simultaneous dissolution and aggregation behavior of metal sulfide NPs using single-particle inductively coupled plasma mass spectrometry (spICP–MS). We focus on nickel sulfide (NiS), with additional data presented for copper sulfide (CuS) and cobalt sulfide (CoS). The kinetics of metal release (dissolution and disaggregation) of NiS was fastest under strongly oxidizing conditions (from 0.04 to >3 min –1 with H 2 O 2 ) and were slower under near-neutral (HEPES buffer/H 2 O) and acidic (1 mM HNO 3 ) conditions (≤0.006 min –1 ). Metal release kinetics in HNO 3 was not faster than in H 2 O or HEPES, suggesting that the solution pH has an influence over both the dissolution kinetics of individual particles and the NP aggregation states, which in combination affect metal release rates over time. Between different metal sulfides, the measured metal release rates were largely consistent with predictions based on the crystallinity, solubility products, and specific surface areas of the NPs, following an order of CoS > NiS > CuS. Here, the spICP–MS approach described here can be easily applied to the characterization of metal release and aggregation of other NPs at low concentrations (~10 5 particles/mL) typically found in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Sorption and Oxidative Degradation of Small Organic Molecules on Mn-Oxides-Effects of pH and Mineral Structures

Manganese (Mn)-oxides regulate carbon (C) cycling in soils by sorbing and oxidizing organic compounds. The composition of soil organic matter varies widely, and little is known about the reactivity of individual organic compounds with structurally diverse Mn-oxides under various environmentally relevant pH conditions. Here, in this study, we examined the affinity of six organic compounds for three Mn-oxides, comprised of layer (birnessite and hydrous Mn oxide HMO) or tunnel (cryptomelane) structures, at acidic (pH 4), slightly acidic (pH 6), and slightly alkaline (pH 8) conditions. Cryptomelane, with a higher specific surface area and point of zero charge, showed higher reactivity than that of HMO and birnessite. Interestingly, these Mn-oxides, although different in structures, decomposed each organic compound to form the same products. Citrate, pyruvate, ascorbate, and catechol induced reduction and dissolution of Mn-oxides. After the reaction, the average oxidation state of Mn in the solids was much lower at pH 4 than at pH 6 and 8, suggesting more reduction under more acidic conditions. Even when reacting with phthalate and propanol, which only sorbed to Mn-oxides but did not degrade, there was proton-promoted Mn dissolution under acidic conditions. These results suggest the significance of environmental pH and mineral structures in affecting the Mn–organic interactions and provide fundamental insights into a better understanding of the roles of Mn-oxides in regulating soil C cycling.

58 GEOSCIENCES↗