Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spark ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Time resolved density measurements in premixed turbulent flames

Premixed, turbulent flames are important in connection with investigations of fundamental, turbulent-reacting-flow processes and the study of practical combustion devices, such as spark ignition engines and premixed, prevaporized gas turbine combustors which burn premixed reactants. The considered investigation is concerned with the application of laser induced Rayleigh scattering to measure the gas density in premixed, methane-air flames. A description is provided of the results of density and velocity measurements in an open, lean, premixed methane-air flame stabilized in grid turbulence of low Reynolds number. It is found that where applicable, Rayleigh scattering can be used to good advantage to measure molecular number density. Mean and rms density results show that the mean flame thickens with axial distance but that the maximum in rms does not change appreciably.

Dandekar, K. V.↗
NASA NTRS1982

Ceramic applications in turbine engines

In the past the potential of vehicular gas engines could not be realized because component materials served to limit the turbine operating temperature, thereby restricting fuel economy and initial cost. It was, therefore, not possible for the vehicular gas turbine to compete with more conventional engines. The emergence of low-cost, high-temperature ceramic components has the potential to reverse this situation. For example, the Allison GT404 engine, operating with ceramic components at turbine inlet temperatures up to 2350 F to 2500 F, has the potential of a fuel economy which is better than that of current Diesel engines. The Allison AGT100 engine operating with ceramic components offers the possibility of a 30% improvement in fuel economy over 1985 spark ignition engines. The materials considered for an employment in the ceramic components include silicon carbide, silicon nitride, aluminum silicate, and lithium aluminum silicate.

Byrd, J. A.↗
NASA NTRS1981

Advanced Gas Turbine (AGT) powertrain system development for automotive applications

An automotive gas turbine powertrain system which, when installed in a 1985 production vehicle (3000 pounds inertia weight), is being developed with a CFDC fuel economy of 42.8 miles per gallon based on Environmental Protection Agency (EPA) test procedures and diesel No. 2 fuel. The AGT-powered vehicle shall give substantially the same overall vehicle driveability and performance as a comparable 1985 production vehicle powered by a conventional spark ignition powertrain system (baseline system). Gaseous emissions and particulate levels less than: NOx = 0.4 gm/mile, HC = 0.41 gm/mile, and CO = 3.4 gm/mile, and a total particulate of 0.2 gm/mile, using the same fuel as used for fuel economy measurements is expected, along with the ability to use a variety of alternate fuels.

Source record↗
NASA NTRS1983

Computer program for Stirling engine performance calculations

The thermodynamic characteristics of the Stirling engine were analyzed and modeled on a computer to support its development as a possible alternative to the automobile spark ignition engine. The computer model is documented. The documentation includes a user's manual, symbols list, a test case, comparison of model predictions with test results, and a description of the analytical equations used in the model.

Tew, R. C., Jr.↗
NASA NTRS1982

Advanced Gas Turbine (AGT) powertrain system development for automotive applications

A gas turbine powertrain for automobiles with reduced fuel consumption and reduced environmental impact is investigated. The automotive gas turbine, when installed in an automobile (3000 pounds inertia weight), provides a CFDC fuel economy of 42.8 miles per gallon based on EPA test procedures and diesel No. 2 fuel. The AGT powered vehicle substantially gives the same overall vehicle driveability and performance as a comparable production vehicle powered by a conventional spark ignition powertrain system. The emissions are less than federal standards, and a variety of fuels can be used.

Source record↗
NASA NTRS1983

Implementation of R & QA practices in Research and Development programs

DOE has established a number of broad programs aimed at reducing fuel consumption. Several programs address the R&D of ground transportation propulsion alternatives to the conventional spark-ignition engine. NASA Lewis is responsible for managing the effort between the Government and industry teams involving American and foreign companies. Thus, existing NASA SR&QA procedure were modified/adapted to these R&D programs and implemented to assure that the test hardware design intent was met, the hardware was not hazardous to personnel, it would demonstrate reliable operation, and it would help establish the future R&D quality assurance and maintainability requirements. This successful low-cost approach might be applicable to other similar projects.

Bankaitis, H.↗
NASA NTRS1983

Stirling engine application study

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

Teagan, W. P.↗
NASA NTRS1983

A fuel-efficient cruise performance model for general aviation piston engine airplanes

A fuel-efficient cruise performance model which facilitates maximizing the specific range of General Aviation airplanes powered by spark-ignition piston engines and propellers is presented. Airplanes of fixed design only are considered. The uses and limitations of typical Pilot Operating Handbook cruise performance data, for constructing cruise performance models suitable for maximizing specific range, are first examined. These data are found to be inadequate for constructing such models. A new model of General Aviation piston-prop airplane cruise performance is then developed. This model consists of two subsystem models: the airframe-propeller-atmosphere subsystem model; and the engine-atmosphere subsystem model. The new model facilitates maximizing specific range; and by virtue of its implicity and low volume data storge requirements, appears suitable for airborne microprocessor implementation.

Parkinson, R. C. H.↗
NASA NTRS1982

Performance improvements of single-engine business airplanes by the integration of advanced technologies

An assessment is presented of the performance gains and economic impact of the integration in general aviation aircraft of advanced technologies, relating to such aspects of design as propulsion, natural laminar flow, lift augmentation, unconventional configurations, and advanced aluminum and composite structures. All considerations are with reference to a baseline mission of 1300 nm range and 300-knot cruise speed with a 1300-lb payload, and a baseline aircraft with a 40 lb/sq ft wing loading and an aspect ratio of 8. Extensive analytical results are presented from the NASA-sponsored General Aviation Synthesis Program. Attention is given to the relative performance gains to be expected from the single-engined baseline aircraft's use of a low cost general aviation turbine engine, a spark-ignited reciprocating engine, a diesel engine, and a Wankel rotary engine.

Kohlman, D. L.↗
NASA NTRS1983

Computed and measured turbulence in axisymmetric reciprocating engines

The turbulent flowfield of a spark-ignition engine affects strongly the combustion characteristics of the engine. The flowfield depends on the design of the combustion chamber and the intake system. The present investigation is concerned with the effect of chamber design, and engine operating conditions on top dead center turbulence prior to ignition. It is shown that many of the trends which were identified in earlier studies can be obtained from a single model. The employed model takes into account a two-dimensional axisymmetric flowfield. Attention is given to governing equations, boundary and initial conditions, a comparison of the computed results with measurements, and the effect of swirl and squish.

Grasso, F.↗
NASA NTRS1983

Downsizing assessment of automotive Stirling engines

A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period.

Knoll, R. H.↗
NASA NTRS1984

An experimental study of laser supported hydrogen plasmas

The rudiments of a rocket thruster which receives its enthalpy from an energy source which is remotely beamed from a laser is described. An experimental study now partially complete is discussed which will eventually provide a detailed understanding of the physics for assessing the feasibility of using hydrogen plasmas for accepting and converting this energy to enthalpy. A plasma ignition scheme which uses a pulsed CO2 laser has been developed and the properties of the ignition spark documented, including breakdown intensities in hydrogen. A complete diagnostic system capable of determining plasma temperature and the plasma absorptivity for subsequent steady state absorption of a high power CO2 laser beam are developed and demonstrative use is discussed for the preliminary case study, a two atmosphere laser supported argon plasma.

Vanzandt, D. M.↗
NASA NTRS1984

Evaluation of heat engine for hybrid vehicle application

The status of ongoing heat-engine developments, including spark-ignition, compression-ignition, internal-combustion, and external-combustion engines is presented. The potential of engine concepts under consideration for hybrid vehicle use is evaluated, using self-imposed criteria for selection. The deficiencies of the engines currently being evaluated in hybrid vehicles are discussed. Focus is on recent research with two-stroke, rotary, and free-piston engines. It is concluded that these engine concepts have the most promising potential for future application in hybrid vehicles. Recommendations are made for analysis and experimentation to evaluate stop-start and transient emission behavior of recommended engine concepts.

Schneider, H. W.↗
NASA NTRS1985

Advanced vehicle systems assessment. Volume 4: Supporting analyses

Volume 4 (Supporting Analyses) is part of a five-volume report, Advanced Vehicle Systems Assessment. Thirty-nine individuals, knowledgeable in advanced technology, were interviewed to obtain their preferences. Rankings were calculated for the eight groups they represented, using multiplicative and additive utility models. The four topics for consideration were: (1) preferred range for various battery technologies; (2) preferred battery technology for each of a variety of travel ranges; (3) most promising battery technology, vehicle range combination; and (4) comparison of the most preferred electric vehicle with the methanol-fuled, spark-ignition engine vehicle and with the most preferred of the hybrid vehicles.

Hardy, K.↗
NASA NTRS1985

Symposium (International) on Combustion, 20th, University of Michigan, Ann Arbor, MI, August 12-17, 1984, Proceedings

The present conference on combustion phenomena considers topics in automotive engine combustion, turbulent reacting flows, the modeling of practical combustion systems, reaction kinetics, combustion-generated particulates, combustion diagnostics, coal combustion process characteristics, fire-related phenomena, explosion/detonation phenomena, spray combustion, ignition/extinction, laminar flames, pollutant formation processes, practical combustor devices, and rocket propellant combustion. Attention is given to the contributions of combustion science to piston engine design, modeling and measurement techniques for turbulent combustion, the specific effects of energy, collisions, and transport processes in combustion chemistry kinetics, the formation of large molecules, particulates and ions in premixed hydrocarbon flames, the application of laser diagnostics to combustion systems, spark ignition energies for dust-air mixtures, the controlling mechanisms of flow-assisted flame spread, the ignition and combustion of coal-water slurries, spontaneous ignition of methane, turbulent and accelerating dust flames, and the temperature sensitivity of double base propellants.

Source record↗
NASA NTRS1987

An experimental study of laser-supported plasmas for laser propulsion: Center director's discretionary fund project DFP-82-33

The rudiments of a rocket thruster, which receives its enthalpy from an energy source which is remotely beamed from a laser, is described. An experimental study, now partially complete, is discussed which will eventually provide a detailed understanding of the physics for assessing the feasibility of using hydrogen plasmas for accepting and converting this energy to enthalpy. A plasma ignition scheme which uses a pulsed CO2 laser was develped and the properites of the ignition spark documented, including breakdown intensities in hydrogen. A complete diagnostic system capable of determining plasma temperature and the plasma absorptivitiy for subsequent steady-state absorption of a high power CO2 laser beam are developed and demonstrative use is discussed for the preliminary case study, a two atmosphere laser supported argon plasma.

Eskridge, R. H.↗
NASA NTRS1986

A 25-LBF gaseous oxygen/gaseous hydrogen thruster for space station application

A prototype 25 lb sub f gaseous oxygen/gaseous hydrogen thruster for Space Station propulsion application was designed and fabricated by Rocketdyne and endurance tested at the NASA/Marshall space Flight Center. The thruster incorporates a regeneratively cooled thrust chamber with a nozzle exit area ratio of 30, a 12-element coaxial injector, a spark igniter, and close-coupled propellant valves. Test results indicate that all major technology issues for long-life gaseous oxygen/gaseous hydrogen thrusters for Space Station application have been resolved.

Heckert, B. J.↗
NASA NTRS1988

Evaluation and Improvement of Liquid Propellant Rocket Chugging Analysis Techniques. Part 2: a Study of Low Frequency Combustion Instability in Rocket Engine Preburners Using a Heterogeneous Stirred Tank Reactor Model

During the shutdown of the space shuttle main engine, oxygen flow is shut off from the fuel preburner and helium is used to push the residual oxygen into the combustion chamber. During this process a low frequency combustion instability, or chug, occurs. This chug has resulted in damage to the engine's augmented spark igniter due to backflow of the contents of the preburner combustion chamber into the oxidizer feed system. To determine possible causes and fixes for the chug, the fuel preburner was modeled as a heterogeneous stirred tank combustion chamber, a variable mass flow rate oxidizer feed system, a constant mass flow rate fuel feed system and an exit turbine. Within the combustion chamber gases were assumed perfectly mixed. To account for liquid in the combustion chamber, a uniform droplet distribution was assumed to exist in the chamber, with mean droplet diameter determined from an empirical relation. A computer program was written to integrate the resulting differential equations. Because chamber contents were assumed perfectly mixed, the fuel preburner model erroneously predicted that combustion would not take place during shutdown. The combustion rate model was modified to assume that all liquid oxygen that vaporized instantaneously combusted with fuel. Using this combustion model, the effect of engine parameters on chamber pressure oscillations during the SSME shutdown was calculated.

Bartrand, Timothy A.↗