Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spacer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Sequentially regular polymer acceptors featuring flexible spacers for high-performance and mechanically robust all-polymer solar cells

Developing high-performance and mechanically robust polymer solar cells (PSCs) is crucial for realizing wearable power sources. While efficient all-polymer solar cells (all-PSCs) can be fabricated from polymerized small-molecule acceptors (PSMAs) with high optical absorption and electron mobilities, they still show limited mechanical robustness. Here, we achieve highly efficient and mechanically robust all-PSCs by designing a PSMA (PYFS-Reg) containing sequence-regular flexible spacers (FSs). The regular incorporation of the FS units into PSMAs is essential in simultaneously improving the electrical and mechanical properties of blend films. As a result, all-PSCs featuring PYFS-Reg achieve a high power conversion efficiency (PCE = 16.1%) and stretchability (crack onset strain (COS) = 22.4%), outperforming PSMAs without FSs (i.e., PYBDT, PCE = 12.6% and COS = 11.7%) or with randomly distributed FSs (i.e., PYFS-Ran, PCE = 12.2% and COS = 18.1%). Importantly, these all-PSCs are fabricated by an environmentally benign, non-halogenated solvent process. To further demonstrate their feasible applications in wearable devices, we construct intrinsically stretchable (IS) all-PSCs by using PYFS-Reg-based active layers, which exhibit a high PCE (10.6%) and excellent device stretchability (strain at PCE 80% = 36.7%).

14 SOLAR ENERGY↗

(001) textured L1{sub 0}-FePt pseudo spin valve with TiN spacer

TiN was investigated as a potential spacer material in L1{sub 0}-FePt based pseudo spin valves (PSV). PSVs with the structure MgO/L1{sub 0}-Fe{sub 50}Pt{sub 50} (20 nm)/TiN (5 nm)/L1{sub 0}-Fe{sub 50}Pt{sub 50} (x nm) were fabricated, where x was varied from 5 to 20 nm. The highest giant magnetoresistance (GMR) ratio of 0.61% was obtained for the PSV with a top L1{sub 0}-FePt thickness of 20 nm. Contributions to the GMR arose from both the spin dependent scattering at the FePt/TiN interfaces and domain wall resistivity. Magnon magnetoresistance was also observed in the fabricated PSVs.

36 MATERIALS SCIENCE↗

Alternative process for thin layer etching: Application to nitride spacer etching stopping on silicon germanium

Silicon nitride spacer etching realization is considered today as one of the most challenging of the etch process for the new devices realization. For this step, the atomic etch precision to stop on silicon or silicon germanium with a perfect anisotropy (no foot formation) is required. The situation is that none of the current plasma technologies can meet all these requirements. To overcome these issues and meet the highly complex requirements imposed by device fabrication processes, we recently proposed an alternative etching process to the current plasma etch chemistries. This process is based on thin film modification by light ions implantation followed by a selective removal of the modified layer with respect to the non-modified material. In this Letter, we demonstrate the benefit of this alternative etch method in term of film damage control (silicon germanium recess obtained is less than 6 A), anisotropy (no foot formation), and its compatibility with other integration steps like epitaxial. The etch mechanisms of this approach are also addressed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetotransport properties of spin-valve structures with Mg spacer layers

A theoretical prediction by Wang et al. [Phys. Rev. B 82, 054405 (2010)] suggests the preferential transmission of majority-spin states with Δ{sub 1} symmetry across a magnesium interlayer in Fe/Mg/MgO/Fe based magnetic tunnel junctions. Here, we report experiments to probe this question in CoFe/Mg/CoFe structures. We find that the strength of the interlayer coupling decays exponentially with increasing the spacer thickness, however, a non-monotonic variation of the magnetoresistance as a function of the Mg layer is observed. These data may help revisit the role of the insertion of a Mg interface layer in MgO-based devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Remarkably High Internal Transcribed Spacer Haplotype Diversity of the Fungal Select Agent Coniothyrium glycines Discovered Throughout Its Range in Sub-Saharan Africa

Red leaf blotch of soybean, caused by the fungus Coniothyrium glycines, is a foliar disease characterized by blotching, necrosis, and defoliation that has only been reported from Africa. The species is listed as a Select Agent by the Federal Select Agent Program due to its potentially devastating impacts to soybean production should it spread to the United States. Despite its potential import, very few isolates are available for study. Herein, we obtained 96 new C. glycines isolates from six soybean-producing countries throughout sub-Saharan Africa. Along with 12 previously collected ones, we sequenced each at the internal transcribed spacer (ITS) region. Between all isolates, we identified a total of 28 single-nucleotide polymorphisms and 23 haplotypes. One hypothesis to explain the tremendous diversity uncovered at the ITS—which is generally conserved within a species—is that our current species concept of C. glycines is too broad and that there may be multiple species that cause red leaf blotch. Zambia contained the highest haplotype diversity, a significant fraction of which remains unsampled. Most haplotypes were specific to a single country, except for two, which were found in Zambia and either neighboring Mozambique or Zimbabwe. This geographic specificity indicates that the ITS region may be useful for identifying source populations or routes of transmission should this pathogen spread beyond Africa. The observed geographic partitioning of this pathogen is likely the result of millions of years of replication on little-studied native hosts, given that soybean has only been cultivated in Africa since the early 1900s.

Plant Sciences↗

Evaluation of CASL boiling model for DNB performance in full scale 5x5 fuel bundle with spacer grids

As one of main tasks for FY17 CASL-THM activity, Evaluation study on applicability of the CASL baseline boiling model for 5x5 DNB application is conducted and the predictive capability of the DNB analysis is reported here. While the baseline CASL-boiling model (GEN- 1A) approach has been successfully implemented and validated with a single pipe application in the previous year’s task, the extended DNB validation for realistic sub-channels with detailed spacer grid configurations are tasked in FY17. The focus area of the current study is to demonstrate the robustness and feasibility of the CASL baseline boiling model for DNB performance in a full 5x5 fuel bundle application. A quantitative evaluation of the DNB predictive capability is performed by comparing with corresponding experimental measurements (i.e. reference for the model validation). The reference data are provided from the Westinghouse Electricity Company (WEC). Two different grid configurations tested here include Non-Mixing Vane Grid (NMVG), and Mixing Vane Grid (MVG). Thorough validation studies with two sub-channel configurations are performed at a wide range of realistic PWR operational conditions.

42 ENGINEERING↗

Combination spacer and gasket provides effective static seal

Closely machined steel ring having narrow sealing lands on both faces and a thin coating of a commercially available halocarbon polymer combines the functions of a spacer and static seal ring or gasket having a minimum of potential leak paths. The device is effective over a wide range of temperatures down to minus 423 deg F and at pressure up to 180 psig.

Jones, F. B.↗

Purging of a multilayer insulation with dacron tuft spacer by gas diffusion

The time and purge gas usage required to purge a multilayer insulation (MLI) panel with gaseous helium by means of gas diffusion to obtain a condensable gas (nitrogen) concentration of less than 1 percent within the panel are stipulated. Two different, flat, rectangular MLI panels, one incorporating a butt joint, were constructed of of 11 double-aluminized Mylar (DAM) radiation shields separated by Dacron tuft spacers. The DAM/Dacron tuft concept is known commercially as Superfloc. The nitrogen gas concentration as a function of time within the MLI panel could be adequately predicted by using a simple, one dimensional gas diffusion model in which the boundary conditions at the edge of the MLI panel were time dependent. The time and purge gas usage required to achieve 1 percent nitrogen gas concentration within the MLI panel varied from 208 to 86 minutes and 34.1 to 56.5 MLI panel purge volumes, respectively, for gaseous helium purge rates from 10 to 40 MLI panel volumes per hour.

Sumner, I. E.↗

Indirect adaptive stabilization of a large, flexible, spinning spacering Simulation studies

A recently formulated approach to the adaptive control of distributed systems combines the simultaneous identification and control philosophy of indirect adaptive control with a modal expansion description of distributed systems. The regulation of a large, flexible, spinning spacering, one half of a dual momentum control device proposed for attitude control of large space systems, provides the example upon which the capabilities of such a synthesis method are tested via simulation.

Hamm, A. L.↗

Flexible Polyimide Aerogels Derived From Use of Neopentyl Spacer in Backbone

Polyimide aerogels have gained much attention in the last decade due to their highly porous structure with low density, low dielectric constant, good mechanical properties and thermal stability. They are desirable for many aerospace and commercial applications including lightweight substrates for antennas for aerospace vehicles, due to the low dielectric constant, approaching one as density decreases. However, with only aromatic diamines in the backbone, the aerogels are flexible only as very thin films, nominally 0.5 mm thick. A more flexible aerogel substrate would allow them to be used as conformal antennas, which would reduce drag and also save space in aerospace vehicles. In this research, we demonstrate that the flexibility can be increased by substituting the aromatic diamines typically used in polyimide aerogels with 1,3-bis(4-aminophenoxy)-2, 2-dimethylpropane (BAPN), which contains a flexible neopentyl spacer group. Using the aliphatic diamine, BAPN, leads to aerogels with a high bend radius even when the aerogels are 2-3 mm thick. Twenty different formulations of polyimide aerogels were synthesized from 3,3’,4,4’-biphenyltetracarboxylic dianhydride (BPDA) and a combination of BAPN and 2,2’-dimethylbenxidine (DMBZ), and cross-linked with 1,3,5-triaminophenoxybenzene (TAB) to understand the effect of polymer concentration, oligomer chain length and concentration of BAPN on the properties of the aerogels. Aerogels made using 50 mol % BAPN with n of 45 and 7 wt % polymer possessed the best combination of properties conducive to use as a flexible substrate for conformal antennas, including low density, good hydrophobicity, low shrinkage with high surface area, a one-inch bend radius in aerogels up to 3 mm thickness, and a dielectric constant of 1.11.

polyimide aerogels↗

Photonic crystals comprising nanoparticles and spacer groups

Provided herein are methods of preparing three-dimensional photonic crystals having tunable optical properties and control over stopband location and width, the three-dimensional photonic crystals comprising nanoparticles and spacer groups.

Mirkin, Chad A.↗

Electronic Structure of HgBa{sub 2}CuO{sub 4+δ} with Self-organized Interstitial Oxygen Wires in the Hg Spacer Planes

While recent experiments have found that at optimum doping for the highest critical temperature in HgBa{sub 2}CuO{sub 4+y} (Hg1201) the oxygen interstitials (O-i) are not homogeneously distributed but form one-dimensional atomic wires, there are no available information of its electronic structure considering self-organized O-i atomic wires. Here we report the calculated electronic structure of HgBa{sub 2}CuO{sub 4+y} where oxygen interstitials form atomic wires along (1,0,0) crystal direction in the Hg layer. We find that at optimum doping for superconductivity the chemical potential is tuned near an electronic topological Lifshitz transition for the appearing of a second quasi 1D Fermi surface. A first large Fermi surface coexists with a second incipient quasi one-dimensional (1D) Fermi surface related with atomic wires of oxygen interstitials. Increasing oxygen doping the chemical potential is driven to the band edge of the second 1D-band giving a peak in the density-of-states. The new 1D electronic states are confined near the oxygen interstitial wires with a small spread only on nearby sites. Spin-polarized calculations show that the magnetic response is confined in the oxygen-poor domains free of oxygen interstitials wires and it is quite insensitive to the density of O-i wires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large magnetoresistance in current-perpendicular-to-plane pseudo spin-valves using Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) Heusler alloy and AgZn spacer

Fully epitaxial pseudo spin-valves (PSVs) using 10-nm-thick Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) (CFGG) ferromagnetic layers and a 5-nm-thick AgZn space layer annealed at 630 °C show a large current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) output with resistance-change area product, ΔRA, of 21.5 mΩ μm{sup 2} and MR ratio of 59.6% at room temperature. These values are substantially enhanced to ΔRA of 59.8 mΩ μm{sup 2} and MR ratio of 200.0% at 10 K. The large MR is attributed to the high spin polarization of the CFGG electrodes with the enhanced L2{sub 1} ordering induced by the atomic diffusion of Zn through the CFGG layers. The CPP-PSV shows relatively large ΔRA of 10.9 mΩ μm{sup 2} with the MR ratio of 25.6% for the low annealing temperature of 350 °C, which is a practically useful feature for read sensor applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗