Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Atomistic to continuum modeling of solidification microstructures

We summarize recent advances in modeling of solidification microstructures using computational methods that bridge atomistic to continuum scales. We first discuss progress in atomistic modeling of equilibrium and non-equilibrium solid–liquid interface properties influencing microstructure formation, as well as interface coalescence phenomena influencing the late stages of solidification. The latter is relevant in the context of hot tearing reviewed in the article by M. Rappaz in this issue. We then discuss progress to model microstructures on a continuum scale using phase-field methods. We focus on selected examples in which modeling of 3D cellular and dendritic microstructures has been directly linked to experimental observations. Finally, we discuss a recently introduced coarse-grained dendritic needle network approach to simulate the formation of well-developed dendritic microstructures. The approach reliably bridges the well-separated scales traditionally simulated by phase-field and grain structure models, hence opening new avenues for quantitative modeling of complex intra- and inter-grain dynamical interactions on a grain scale.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An OpenMP GPU-offload implementation of a non-equilibrium solidification cellular automata model for additive manufacturing

Here, in this paper, performance strategies on GPU-based HPC platforms of a cellular automata (CA) simulation code for non-equilibrium solidification, including nucleation, grain growth, solute partitioning and transport for the metal additive manufacturing (AM) process are investigated using OpenMP 4.5. To accurately report the speed-up for multicore CPUs and GPUs, a rigorous performance analysis employed optimizations appropriate for both CPU-only code (baseline) and GPU offload codes for an isothermal test problem. The performance results on Summit at the Oak Ridge Leadership Computing Facility indicate that using a precomputed list of interface cells significantly decreased the wall-clock time on GPUs. The speedup due to GPU acceleration was evaluated for a full Summit node and measured to be 1.8X when comparing a 6 MPI tasks run with 6 GPUs versus 36 MPI tasks on the CPU only. That speed-up was found to be 7.9X when comparing 6 MPI tasks with 6 GPUs versus the 6 MPI tasks running on the CPU only. Performance measurements showed that system total time is almost constant for runs with more than 96 MPI tasks (or GPUs), indicating that the GPU-accelerated code showed an excellent weak scaling performance. Finally, a rapid directional solidification problem was considered to demonstrate the CA code capability on Summit. It was found that a mesh size of at least 0.05 μm is recommended for the AM-like simulations in order to obtain accurate elongated grain microstructure and elongated subgrain features, which are in qualitative good agreement with experimental data. The results presented in this study indicate that the performance strategies on GPU-based HPC platforms for the CA code are appropriate for novel HPC exascale platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An operando synchrotron study on the effect of wire melting state on solidification microstructures of Inconel 718 in wire-laser directed energy deposition

Directed energy deposition (DED) with a coaxial wire-laser configuration has gained significant attention in recent years for the production of large-scale metallic components because of its low directional dependence, fast deposition rate, high feedstock efficiency, and low manufacturing costs. This work studies the coaxial wire-laser DED process of Inconel 718 alloy under a stable deposition condition with a relatively low input volumetric energy density (55.5J/mm 3 ). Post characterization reveals a cluster of refined grains at the center-bottom region of the as-printed track. Operando high-energy synchrotron X-ray experiments and multi-physics modeling are applied innovatively to study the fundamental mechanism responsible for the formation of this microstructure. The X-ray diffraction experiment provides direct evidence, which is supported by the simulation, that the feeding wire can reach the melt pool bottom and release solid particles (primarily carbides) near the mushy zone owing to insufficient melting. Consequently, these sub-micron sized particles suppress the growth of large columnar grains and cause the formation of unique microstructural heterogeneity. In conclusion, this discovery offers new opportunities for tailoring the solidification microstructure by controlling the melting state of the feedstock wire in DED process, in addition to commonly known factors such as the thermal gradient and solidification velocity.

42 ENGINEERING↗
DOE OSTI2016

Processing of alnico permanent magnets by advanced directional solidification methods

Advanced directional solidification methods have been used to produce large (>15 cm length) castings of Alnico permanent magnets with highly oriented columnar microstructures. In combination with subsequent thermomagnetic and draw thermal treatment, this method was used to enable the high coercivity, high-Titanium Alnico composition of 39% Co, 29.5% Fe, 14% Ni, 7.5% Ti, 7% Al, 3% Cu (wt%) to have an intrinsic coercivity (H ci ) of 2.0 kOe, a remanence (B r ) of 10.2 kG, and an energy product (BH) max of 10.9 MGOe. These properties compare favorably to typical properties for the commercial Alnico 9. Directional solidification of higher Ti compositions yielded anisotropic columnar grained microstructures if high heat extraction rates through the mold surface of at least 200 kW/m 2 were attained. This was achieved through the use of a thin walled (5 mm thick) high thermal conductivity SiC shell mold extracted from a molten Sn bath at a withdrawal rate of at least 200 mm/h. However, higher Ti compositions did not result in further increases in magnet performance. Images of the microstructures collected by scanning electron microscopy (SEM) reveal a majority α phase with inclusions of secondary αγ phase. Transmission electron microscopy (TEM) reveals that the α phase has a spinodally decomposed microstructure of FeCo-rich needles in a NiAl-rich matrix. In the 7.5% Ti composition the diameter distribution of the FeCo needles was bimodal with the majority having diameters of approximately 50 nm with a small fraction having diameters of approximately 10 nm. The needles formed a mosaic pattern and were elongated along one <001> crystal direction (parallel to the field used during magnetic annealing). Cu precipitates were observed between the needles. Regions of abnormal spinodal morphology appeared to correlate with secondary phase precipitates. The presence of these abnormalities did not prevent the material from displaying superior magnetic properties in the 7.5% Ti composition. As a result, higher Ti compositions did not display the preferred spinodal microstructure, explaining their inferior magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2015

A mixture of massive and feathery microstructures of Ti48Al2Cr2Nb alloy by high undercooled solidification

A mixture of massive and feathery microstructures was observed in Ti48Al2Cr2Nb alloy subjected to the undercooled solidification rather than the heat treatments in most cases. Double recalescence events and primary β solidification confirmed that massive γ phase did not directly nucleate from the undercooled melt but formed during the solid-state transformations. It is believed that small white areas (aluminium-poor) along lamellar grain boundaries may be closely related to the formation of massive γ phase and feathery γ phase. High dislocation density and stacking faults were detected in massive γ phase by transmission electron microscopy. The high energy of defects and undercooling in the solid state phase transformation can provide sufficiently high driving force for the nucleation of massive γ phase. - Graphical abstract: Display Omitted - Highlights: • A mixture of massive and feathery microstructures was observed. • Massive γ formed during the solid-state transformations. • Defects and undercooling provide driving force for the nucleation of massive γ.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Formation of less-known structurally complex ζ{sub b} and orthorhombic quasicrystalline approximant ε{sub n} on solidification of selected Al–Pd–Cr alloys

The evolution of phases was investigated on cooling of Al{sub 71}Pd{sub 24}Cr{sub 5}, Al{sub 73}Pd{sub 20}Cr{sub 7}, and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys from 1350 °C down to ambient temperature with the rate of 10 °C·min{sup −1}. To perform the investigation, differential thermal analysis, synchrotron X-ray powder diffraction, and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy were used. In all the investigated alloys structurally complex phases ε{sub n} (ε{sub 6} + ε{sub 28}) and ζ{sub b}, as well as the δ-phase were identified. Based on the results of differential thermal analysis, sequences of phase transformations were determined. The Al{sub 71}Pd{sub 24}Cr{sub 5} alloy started to solidify at 1031.4 °C through β. Primary dendrites of ζ{sub b} were observed in Al{sub 73}Pd{sub 20}Cr{sub 7} and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys. In the second step of solidification δ and/or ζ{sub b} were formed. The peritectic reaction, liquid + ζ{sub b} + δ → ε{sub n} + ζ{sub b} + δ, leading to the formation of the quasicrystalline approximant ε{sub n} (ε{sub 6} + ε{sub 28}) took place in the final step of solidification at approximately 792 °C. - Highlights: • Structurally complex ε{sub n} (ε{sub 6} + ε{sub 28}), ζ{sub b} and δ-phases were identified. • The Al{sub 71}Pd{sub 24}Cr{sub 5} alloy started to solidify at 1031.4 °C through the primary β phase. • The Al{sub 73}Pd{sub 20}Cr{sub 7} and Al{sub 73}Pd{sub 23}Cr{sub 4} alloys solidified in the same way. • The quasicrystalline approximant ε{sub n} (ε{sub 6} + ε{sub 28}) was formed at approximately 792 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Widmannstätten laths in Ti48Al2Cr2Nb alloy by undercooled solidification

Widmannstätten laths in Ti48Al2Cr2Nb alloy were obtained by containerless electromagnetic levitation during undercooled solidification rather than heat treatments in most cases. The nucleation of γ{sub Widmannstätten} is confirmed by the thermal history of the second recalescence behaviour. High dislocation density, stacking faults and dislocation slip are observed by transmission electron microscopy. By quantitative analysis of the transformation energy, the driving force for γ{sub Widmannstätten} in the solid state phase transformation is calculated, compared with that of heat treatments. Meanwhile, the proper undercoolings (ΔT = 257–300 K), post-solidification cooling rates (11.1–29.1 K/s), the fine lamellar colony sizes (306–467 μm) and proper undercoolings in the solid state phase transformation are in favour of promoting the formation of Widmannstätten laths at moderate undercoolings. - Graphical abstract: Display Omitted - Highlights: • Widmannstätten laths were observed in undercooled TiAl alloy. • The influencing factors were discussed in undercooled TiAl alloy. • An analysis of the nucleation of γ{sub Widmannstätten} is carried out.

36 MATERIALS SCIENCE↗
DOE OSTI2018

A novel interface strengthening layer: Nanoscale AuCu super-structure formed during Au80Sn20/Cu rapid solidification soldering process

Highlights: • The nanoscale AuCu super-structure formed in Au80Sn20/Cu soldering joint. • The phase-transformation diffusion mechanism of Au80Sn20/Cu soldering process was studied. • The orientation relationship of Au80Sn20/Cu intermetallic compounds was investigated. • The interfacial strengthening mechanism of nanoscale AuCu layer was discussed. - Abstract: Phase composition and orientation of intermetallic compounds layers determine the functional and mechanical properties of solder joints. In this paper, interfacial reaction and strengthening mechanism of Au80Sn20/Cu joint by rapid solidification reflow soldering were studied. The Au80Sn20/Cu solder joint by rapid solidification reflow soldering exhibit a superior shear property, and the shear strength reaches up to 90 MPa. It is found that a new nanoscale AuCu super-structure formed in the interfacial intermetallic compounds layer, which is coherent with the [001] Cu substrate. The orientation relationship of Cu matrix/interfacial intermetallic compounds is determined to be [001]{sub Cu}∥[001]{sub AuCu}∥[ 2-bar 4 2-bar 3]{sub (AuCu){sub 5Sn}} and (200){sub Cu}∥(200){sub AuCu}∥(10 1-bar 0){sub (AuCu){sub 5Sn}}. Nanoscale AuCu super-structure influences the interface slip direction and provides interface misfit dislocation, hinder the dislocation movement, lead to the interface strengthening effect. Our finding on nanoscale AuCu super-structure formed during Au80Sn20/Cu soldering process not only sheds light on future research direction but also provides practical guidance to the engineers in solder industry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Solidification behavior and cracking mechanisms of Ru-containing BCC-B2 superalloys

Many precipitation-strengthened alloys are highly susceptible to cracking during additive manufacturing (AM), which often requires compositional adjustments to mitigate. Recently, it has been demonstrated that refractory BCC alloys can be precipitation strengthened with ordered Ru-containing B2 precipitates to temperatures exceeding 1200 °C. This motivates a study of the potential fabricability of quaternary and quinary refractory BCC-B2 alloys by AM using single track laser experiments. Alloys with greater than 9 at.% Ru exhibit crack formation upon cooling. Solidification cracking was observed in all Zr-containing alloys, which can be mitigated by substituting Hf. Furthermore, this cracking is attributed to the strong partitioning of Zr during solidification, as revealed by characterization of alloy solidus, liquidus, and partition coefficients. Hf 5 Ru 4 -Nb 63 V 28 is identified as a promising BCC-B2 composition with a high B2 solvus (>1300 °C) and solidus (1695 °C) along with a high resistance to cracking.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Influence of solidification accelerators on structure formation of anhydrite-containing binders

The article presents results of scientific analysis of chemical additives influence on acid fluoride binder. It was found that the influence of sulfate nature additives on the process of hydration and solidification of the binder is similar to influence of additives on indissoluble anhydrite. Additives with SO{sub 4}{sup 2−} anion NO{sup −} are more efficient. The mentioned additives according to accelerating effect belong to the following succession: K{sub 2}SO{sub 4} > Na{sub 2}SO{sub 4} > FeSO{sub 4} > MgSO{sub 4}. Facilitation of the process of hydration and solidification of the binder, increase in density and durability of the binder (32 MPa) is to the greatest extent achieved with the introduction of 2% sodium sulfate additive of the binder’s mass into the composition of the binder along with the ultrasonic treatment of water solution. Directed crystal formation process with healing of porous structure by new growths presented as calcium sulfate dehydrate and hydroglauberite provides positive effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Quantifying uncertainty in the process-structure relationship for Al–Cu solidification

Phase field method (PFM) is a simulation tool to predict microstructural evolution during solidification and is helpful to establish the process-structure relationship for alloys. The robustness of the relationship however is affected by model-form and parameter uncertainties in PFM. In this paper, the uncertainty associated with the thermodynamic and process parameters of PFM is studied and quantified. Surrogate modeling is used to interpolate four quantities of interests (QoIs), including dendritic perimeter, area, primary arm length, and solute segregation, as functions of thermodynamic and process parameters. A sparse grid approach is applied to mitigate the curse-of-dimensionality computational burden in uncertainty quantification. Polynomial chaos expansion is employed to obtain the probability density functions of the QoIs. The effect of parameter uncertainty on the Al–Cu dendritic growth during solidification simulation are investigated. Here, the results show that the dendritic morphology varies significantly with respect to the interface mobility and the initial temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microstructural Pattern Formation during Far-from-Equilibrium Alloy Solidification

We introduce a new phase-field formulation of rapid alloy solidification that quantitatively in- corporates non-equilibrium effects at the solid-liquid interface over a very wide range of interface velocities. Simulations identify a new dynamical instability of dendrite tip growth driven by solute trapping at velocities approaching the absolute stability limit. They also reproduce the formation of the widely observed banded microstructures, revealing how this instability triggers transitions between dendritic and microsegregation-free solidification. Predicted band spacings agree quantita- tively with observations in rapidly solidified Al-Cu thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Numerical Simulation of Solidification of Colloids Inside a Differentially Heated Cavity

Development of the solid–liquid interface, distribution of the particle concentration field, as well as the development of thermosolutal convection during solidification of colloidal suspensions in a differentially heated cavity are investigated. The numerical model is based on the one-fluid mixture approach combined with the single-domain enthalpy porosity model for phase change, and it is implemented in FLUENT software package. The linear dependence of the liquidus and solidus temperatures with the concentration of the nanoparticles was assumed. A colloidal suspension consisting of water and copper or alumina nanoparticles were considered. In the current investigation, the nanoparticle size selected was 5 and 2 nm. The suspension was solidified unidirectionally inside a square differentially heated cavity that was cooled from the left side. It was found that the solid–liquid interface changed its morphology from a planar shape to a dendritic one as the solidification process proceeds in time, due to the constitutional supercooling that resulted from the increased concentration of particles at the solid–liquid interface rejected from the crystalline phase. Initially, the flow consisted of two vortices rotating in opposite directions. However, at later times, only one counter clockwise rotating cell survived. Changing the material of the particle to alumina resulted in crystallized phase with a higher concentration of particles. If it is compared to that of the solid phase resulted from freezing the copper–water colloidal suspension. Furthermore, decreasing the segregation coefficient destabilizes the solid–liquid interface and increases the intensity of the convection cell with respect to that of the case of no particle rejection. At slow freezing rates, the resulting crystal phase consisted of lower particle content compared to the case of higher freezing rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Numerical Study and Validation of Melting and Solidification in PCM Embedded Heat Exchangers with Straight Tube

Latent heat thermal energy storage (LHTES) systems have shown great potential to enable reliable use of renewable energy and load shifting. LHTES offer high storage density and release energy at near constant temperature because of its use of phase change materials (PCMs). The cylindrical PCM heat exchangers (PCMHX) are one of the most used technologies due to their simplicity. Numerical models for such PCMHX enable engineers to estimate their performance for different design parameters and operating conditions without having to test them all. However, modeling the phase change phenomena can be challenging. To better understand the difficulties involving accurate modeling of PCMHX, a cylindrical latent storage unit filled with PCM and water as in-tube heat transfer fluid (HTF) is numerically investigated. This paper presents a study based on a 2D-axisymmetric model of a straight tube embedded in PCM in a cylindrical container. CFD is used to study the charging (melting) and discharging (solidification) phenomena. The models are validated against experimental and numerical data from the literature. The predicted local PCM temperature profile over time agrees within 2K compared to the experimental values. The paper also presents a simple method to estimate the melting and solidification phase change temperature range from limited data provided by PCM manufacturers.

PCM, melting, solidification, CFD, heat exchanger↗
DOE OSTI2015

Geo-polymer solidification technology approved by Czech / Slovak nuclear authority to immobilise NPP resins and sludge waste - 15555

This paper presents the features and performance record of the geo-polymer solidification technology, SIAL{sup R}, licensed for use by both the Slovakian (UJD SR) and Czech Nuclear (SUJB) regulators. An overview of its performance at Bohunice in Slovakia, where it has been used to successfully treat resins and sludge wasteforms will be provided along with references to other plants where it has been used. More recently, geo-polymers have been noted as an immobilization technology which shows potential for resins produced by treatment of radioactive contaminated water resulting from the clean-up of the Fukushima Daiichi Plant. The Nuclear Power Plant A-1 located in Jaslovske Bohunice was completed in 1972 and operated for 5 years until two accidents in 1976 and 1977. After the second accident in February 1977 (INES level 4) the Nuclear Power Plant was permanently shut down for decommissioning. Fuel assemblies and fuel cladding damaged in the accidents led to significant Sr-90, Cs-137 and transuranic contamination. As a consequence of the long-term corrosion of the barrier's material, highly contaminated sludge accumulated which could not be effectively immobilized using conventional methods such as cementation or bitumen treatment due to adverse physical-chemical properties and high specific activity of the waste (Cs-137). This challenge led to AMEC developing and licensing the geo-polymer, SIAL{sup R}. Today, this geo-polymer is one of the most proven and widely used for on-site solidification of radioactive materials such as sludge, resins, sorbents and organic liquids. There are numerous benefits to using this geo-polymer for waste immobilisation. It can be used at room temperature and can incorporate up to approximately four times as much waste (sludge, resin) as a Portland cement matrix equivalent depending on the waste being treated. In addition, it is characterized by excellent mechanical and physical properties, compared with the earlier generation techniques. This includes higher mechanical strength, lower leachability, low volatility, posing a low fire risk and excellent physical stability in the presence of frost and water (no distortion or cracking). Dedicated facilities to receive and encapsulate waste from different locations can be created but this geo-polymer can also provide efficient and practical on-site treatment of radioactive waste streams. This is achievable because the equipment used to encapsulate waste using SIAL{sup R} is also modular, flexible and versatile. At Bohunice, the facility for encapsulation was designed to occupy existing areas of the plant in close proximity to the tanks where the waste was being stored. This allowed for the removal of the waste using Remote Operated Vehicles (ROVs) and for the waste to be immediately treated on site without the need for transportation saving both time and resource. To achieve this, some of the rooms and areas of the building were assessed and modified to ensure that the waste package flow was suitable whilst ensuring that appropriate safety measures were in place such as adequate shielding to reduce or entirely eliminate dose uptake of workers. To date, SIAL{sup R} has been used to successfully immobilize approximately 500 tons of waste which includes sludge and resin from Bohunice, Slovakia and approximately 250 m{sup 3} of spent ion exchange resins from tanks on site at the Dukovany nuclear plant, Czech Republic. It now has a track record of over 15 years which includes on-going research and development. The International missions WANO and OSART evaluated the SIAL{sup R} matrix technology at NPP Dukovany as an example of good practice. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Development of Cement Solidification Technique for Sodium Borate Waste Produced in PWR Plants - 16061

A cement solidification process for treating sodium borate waste produced in pressurized water reactor (PWR) plants was studied. It is known that the setting and hardening reaction of cement is retarded by the presence of boron compounds. This technique was developed to obtain high uniaxial compressive strength more than 10 MPa which can satisfy various countries disposal regulations. As examples of disposal regulations, France requires 8 MPa for homogeneous solidified products. The sodium/ boron (Na/B) ratio was controlled to about 1 by adding NaOH to simulated liquid waste for the purpose of improving the workablility and mechanical strength. To obtain high volume reduction, simulated liquid waste was dehydrated and powdered by using a wiped film evaporator. Ordinary portland cement (OPC) was used for the solidification. The viscosity of cement mixture was controlled by the water/cement ratio. The resulting viscosity became less than 25 dPa.s, and it was possible to continuously mix the mixture. Solidified cement with containing 73 kg/m{sup 3} of boron had a uniaxial compressive strength of more than 10 MPa. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Studies on Workability of Geopolymer Solidification - 18171

In Japan, intermediate-level radioactive waste, such as spent resin, is solidified and set in sealed containers without venting. To reduce the amount of hydrogen generated due to water radiolysis in stored intermediate-level waste, geopolymer solidification has been studied. Geopolymer solidification is an excellent method for conditioning intermediate-level waste from the viewpoint of its high thermal stability and low processing cost. However, it has a problem that the apparent viscosity increases drastically a few minutes after the onset of setting. This may cause some trouble in the process of pouring the geopolymer into drums and mixing it with waste. In this study, in order to control the workability of a geopolymer mixture, we investigated the effects of the compounding ratio and the kinds of chemical agents used. We confirmed that the geopolymer reaction was slowed down by reducing the amount of calcium and adding boron. The uniaxial compressive strength of the geopolymer was 3-80 MPa. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Solidification of Low and Intermediate Level Waste - A Comparison between Different Methods - 19584

The treatment of radioactive materials results in products that have to be suitable for a period of interim storage as well as for disposal in a repository. Considering available options for treatment of radioactive waste, future disposal also has to be taken into account. Up to now, only cementation and encapsulation in geopolymer (only to limited extent) are relevant treatment methods for the solidification of German waste for disposal in the repository Grube Konrad. However, a synopsis of other solidification technologies is considered to be helpful in order to be prepared for future developments in the fields of radioactive waste treatment. Treatment methods addressed in this paper are: - Cementation; - Encapsulation into geopolymer matrix; - Vitrification; - SYNROC; - Geomelting. The criteria for evaluation of the treatment methods are as follows: - Requirements concerning waste properties; - Safety of treatment facilities; - Fulfillment of waste acceptance criteria for repository Grube Konrad; - Fulfillment of requirements for near surface disposal; - Suitability for long-term interim storage. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗