Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar cells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Advances in SnO 2 for Efficient and Stable n-i-p Perovskite Solar Cells

Perovskite solar cells (PSCs) based on the regular n-i-p device architecture have reached above 25% certified efficiency with continuously reported improvements in recent years. A key common factor for these recent breakthroughs is the development of SnO 2 as an effective electron transport layer in these devices. In this review, we discuss the key advances in SnO 2 development, including various deposition approaches and surface treatment strategies, to enhance the bulk and interface properties of SnO 2 for highly efficient and stable n-i-p PSCs. We also discuss the general materials chemistry associated with SnO 2 along with the corresponding materials challenges and improvement strategies, focusing on defects, intrinsic properties, and impact on device characteristics. Finally, we highlight some SnO2 implementations related to scalable processes and flexible devices, and we also provide our perspective on the future development of efficient and stable large-scale perovskite solar modules.

14 SOLAR ENERGY↗
DOE OSTI2024

Rapid advances enabling high-performance inverted perovskite solar cells

Perovskite solar cells (PSCs) that have a positive–intrinsic–negative (p–i–n, or often referred to as inverted) structure are becoming increasingly attractive for commercialization owing to their rapid increase in power conversion efficiency, easily scalable fabrication, reliable operation and compatibility with various perovskite-based tandem device configurations. In this report we review key material and device considerations for making highly efficient and stable p–i–n PSCs. First, we summarize key advances in charge transport materials, which were critical to the rapid power conversion efficiency progress. Second, we discuss promising perovskite compositions and fabrication methods. We highlight various additive engineering approaches to improve the perovskite layer as well as interface engineering strategies that target either the buried or top perovskite surface layer. Third, we review progress in tandem devices, focusing on optimization of the interconnection layer. Next, we summarize the status and strategies for improving p–i–n PSC stability, especially considering the challenges of outdoor applications. We also provide prospects for future research directions and challenges.

14 SOLAR ENERGY↗
DOE OSTI2024

Surface Passivation to Improve the Performance of Perovskite Solar Cells

Perovskite solar cells (PSCs) suffer from a quick efficiency drop after fabrication, partly due to surface defects, and efficiency can be further enhanced with the passivation of surface defects. Herein, surface passivation is reviewed as a method to improve both the stability and efficiency of PSCs, with an emphasis on the chemical mechanism of surface passivation. Various molecules are utilized as surface passivants, such as halides, Lewis acids and bases, amines (some result in low-dimensional perovskite), and polymers. Multifunctional molecules are a promising group of passivants, as they are capable of passivating multiple defects with various functional groups. This review categorizes these passivants, in addition to considering the potential and limitations of each type of passivant. Additionally, surface passivants for Sn-based PSCs are discussed since this group of PSCs has poor photovoltaic performance compared to their lead-based counterpart due to their severe surface defects. Lastly, future perspectives on the usage of surface passivation as a method to improve the photovoltaic performance of PSCs are addressed to provide a direction for upcoming research and practical applications.

14 SOLAR ENERGY↗
DOE OSTI2023

Tailoring Molecular-Scale Contact at Perovskite/Polymeric Hole Transporting Material Interface for Efficient Solar Cells

Perovskite solar cells (PSCs) have delivered more than 25% of power conversion efficiency (PCE) and incorporating polymers as hole transporting layers (HTLs) can further enhance the stability of devices towards the goal of commercialization. Among various polymeric hole transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with perovskite, limiting the device performance. Using molecular side-chain engineering, we successfully constructed a uniform two-dimensional (2D) perovskite interlayer with conjugated ligands, between three-dimensional (3D) perovskites and PTAA. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion was significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enabled the as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibited both superior thermal stability under 60°C heating and moisture stability in ambient conditions.

14 SOLAR ENERGY↗
DOE OSTI2023

Modulating the Mixing Gibbs Free Energy to Enhance Solid–Liquid Phase Separation for High–Performance Organic Solar Cells

Organic solar cells (OSC) feature a hierarchical structure with the electron donor/acceptor layer sandwiched by anode and cathode, which raises the importance of controlling the molecular crystal orientation, domain size, and vertical distribution to facilitate the charge collection at electrodes. However, the similar conjugated backbone of donor/acceptor material and fast film–formation kinetics have led to spinodal–decomposition–orientated phase separation that result in the film presenting an intimately mixed morphology and random molecular orientation. To solve the issue, the mixing Gibbs free energy–triggered solid–liquid phase separation during the film formation process is enhanced by solidifying one component and solvating the other based on a liquid additive. Following the liquid evaporation process, a favorable vertical distribution is obtained. Meanwhile, the prolonged solvation process enlarges the domain size and assists the molecules to diffuse and orient properly, enabling better exciton/charge dynamics during the power conversion processes. As a result, the fabricated devices exhibit a fill factor over 80% and an efficiency of 18.72%, which is one of the top efficiencies for binary OSCs. In conclusion, insights and a methodology is provided here to manipulate the organic donor/acceptor phase separation in terms of mixing Gibbs free energy.

14 SOLAR ENERGY↗
DOE OSTI2023

Reverse-Bias Resilience of Monolithic Perovskite/Silicon Tandem Solar Cells

Metal halide perovskites have rapidly enabled a range of high-performance photovoltaic technologies. However, catastrophic failure under reverse voltage bias poses a roadblock for their commercialization. In this work, we conduct a series of stress tests to compare the reverse-bias stability of perovskite single-junction, silicon single-junction, and monolithic perovskite/silicon tandem solar cells. We demonstrate that the tested perovskite/silicon tandem devices are considerably more resilient against reverse bias compared with perovskite single-junction devices. The origin of such improved stability stems from the low reverse-bias diode current of the silicon subcell. This translates to dropping most of the voltage over the silicon subcell, where such a favorable voltage distribution protects the perovskite subcell from reverse-bias-induced degradation. These results highlight that, compared with other perovskite technologies, monolithic perovskite/silicon tandems are at a higher technology readiness level in terms of tackling the reverse bias and partial shading challenges, which is a considerable advantage toward commercialization.

halide perovskite↗
DOE OSTI2026

Performance measurement of emerging 3- and 4-terminal tandem solar cells

Tandem solar cells are not limited to the conventional two-terminal (2-T) configuration. Multi-terminal designs like three-terminal (3-T) and four-terminal (4-T) devices have gained increasing attention in the PV community due to their relaxed current-matching requirement between subcells and their potential for enhanced energy yield. However, reliable and standardized methods for evaluating the performance of multi-terminal tandems remain underdeveloped. This work addresses this gap by providing comprehensive measurement guidelines tailored to these advanced configurations. We examine key coupling mechanisms between subcells, including the shared electrical load in 3-T devices and optical luminescent coupling in both 3-T and 4-T devices, to enable accurate and consistent performance evaluation. Furthermore, we propose two stabilized measurement methods for emerging 3-T tandem cells incorporating perovskite subcells: (1) a two-dimensional maximum-power-point tracking (MPPT) approach that continuously tracks both subcells' maximum power points (P MAX ) until convergence to stabilized outputs, and (2) a hybrid approach that combines MPPT for one subcell with stabilized current recording under fixed voltage biases near the P MAX of the other, allowing robust extraction of the overall stabilized P MAX (termed “MPPT + asymptotic P MA X scan” method). These methods directly address the dynamic current responses inherent to perovskite-containing tandems, providing a foundation for meaningful and reproducible performance comparisons.

14 SOLAR ENERGY↗
NASA NTRS1980

Optimization of solar cells for air mass zero operation and study of solar cells at high temperatures, phase 4

The Pd contact to GaAs was studied using backscattering, Auger analysis, and sheet resistance measurements. Several metallurgical phases were present at low temperatures, but PdGa was the dominant phase in samples annealed at 500 C. Ti/Pd/Ag contacts appeared to have the lowest contact resistance. Etchback epitaxy (EBE) was compared to saturated melt epitaxy (SME) method of growing liquid phase epitaxial layers. The SME method resulted in a lower density of Ga microdroplets in the grown layer, although the best solar cells were made by the EBE method. Photoluminescence was developed as a tool for contactless analysis of GaAs cells. Efficiencies of over 8 percent were measured at 250 C.

Hovel, H. J.↗
NASA NTRS2005

Measurement and Characterization of Concentrator Solar Cells II

Concentrator solar cells are continuing to get more consideration for use in power systems. This interest is because concentrator systems can have a net lower cost per watt in solar cell materials plus ongoing improvements in sun-tracking technology. Quantitatively measuring the efficiency of solar cells under concentration is difficult. Traditionally, the light concentration on solar cells has been determined by using a ratio of the measured solar cell s short circuit current to that at one sun, this assumes that current changes proportionally with light intensity. This works well with low to moderate (<20 suns) concentration levels on "well-behaved" linear cells but does not apply when cells respond superlinearly, current increases faster than intensity, or sublinearly, current increases more slowly than intensity. This paper continues work on using view factors to determine the concentration level and linearity of the solar cell with mathematical view factor analysis and experimental results [1].

Scheiman, Dave↗
NASA NTRS1985

Loss mechanisms in high-efficiency solar cells: Study of material properties and high-efficiency solar-cell performance on material composition: Project tasks

Loss mechanisms in high-efficiency solar cells were discussed. Fundamental limitations and practical solutions were stressed. Present cell efficiency is limited by many recombination sites: emitter, base, contacts, and oxide/silicon interface. Use of polysilicon passivation was suggested. After reduction of these losses, a 25% efficient cell could be built. A floating emitter cell design was shown that had the potential of low recombination losses.

Sah, C. T.↗
NASA NTRS1977

Solar cell shingle

A solar cell shingle was made of an array of solar cells on a lower portion of a substantially rectangular shingle substrate made of fiberglass cloth or the like. The solar cells may be encapsulated in flourinated ethylene propylene or some other weatherproof translucent or transparent encapsulant to form a combined electrical module and a roof shingle. The interconnected solar cells were connected to connectors at the edge of the substrate through a connection to a common electrical bus or busses. An overlap area was arranged to receive the overlap of a cooperating similar shingle so that the cell portion of the cooperating shingle may overlie the overlap area of the roof shingle. Accordingly, the same shingle serves the double function of an ordinary roof shingle which may be applied in the usual way and an array of cooperating solar cells from which electrical energy may be collected.

Forestieri, A. F.↗
DOE OSTI2023

How Cation Migration across a 2D/3D Interface Dictates Perovskite Solar Cell Efficiency

Perovskite solar cells with 2D/3D architecture are claimed to exhibit better stability compared to pristine 3D films at room temperature. However, under illumination and/or heat, cation migration causes the exchange of the bulky spacer cations (2D phase) with the smaller A-site cations (3D phase), creating a gradient heterostructure at the 2D/3D interface. We have evaluated the performance of BA 2 MAPb 2 I 7 /MAPbI 3 (2D/3D) and MAPbI 3 (3D) solar cells at different temperatures, while simultaneously probing the absorption changes of the 2D/3D perovskite layer and the photovoltaic performance of solar cell devices. The 2D/3D solar cells were more stable at room temperature but exhibited deterioration of photovoltaic performance at high temperatures. Here, by employing in situ measurements of operating solar cells to track both the photoconversion efficiency and absorption changes at different temperatures, we show that the cation exchange at the 2D/3D interface contributes to the efficiency losses.

14 SOLAR ENERGY↗
DOE OSTI2022

Copper Outdiffusion from Copper-Plated Solar Cell Contacts during Damp Heat Exposure

Plated copper (Cu) contacts for silicon (Si) solar cells are an attractive alternative material to conventional screenprinted silver, but there are unresolved questions on the long-term integrity of plated contact structures. Here, in this work, we perform characterization on plated Cu contacts from encapsulated cells that were degraded during extended exposure to damp heat (DH) stress. First, using energy-dispersive X-ray spectroscopy, we find evidence of Cu outdiffusion upward through capping layers made of both tin and silver applied with light-induced plating, resulting in a layer of Cu on the outer contact surface. We hypothesize that if Cu is mobile in the module, it may eventually find some route by which to enter the Si cells where it can degrade performance. Subsequently, in several types of Cu-plated, DH-degraded cells, secondary ion mass spectrometry detects elevated levels of Cu at the Si surface and in the Si cell bulk, which suggests that Cu can indeed migrate from contacts into Si over the course of DH stress.

14 SOLAR ENERGY↗