Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A rational approach to the use of Prandtl's mixing length model in free turbulent shear flow calculations

Prandtl's basic mixing length model was used to compute 22 test cases on free turbulent shear flows. The calculations employed appropriate algebraic length scale equations and single values of mixing length constant for planar and axisymmetric flows, respectively. Good agreement with data was obtained except for flows, such as supersonic free shear layers, where large sustained sensitivity changes occur. The inability to predict the more gradual mixing in these flows is tentatively ascribed to the presence of a significant turbulence-induced transverse static pressure gradient which is neglected in conventional solution procedures. Some type of an equation for length scale development was found to be necessary for successful computation of highly nonsimilar flow regions such as jet or wake development from thick wall flows.

Rudy, D. H.↗
NASA NTRS1991

Renormalization group analysis of anisotropic diffusion in turbulent shear flows

The renormalization group is applied to compute anisotropic corrections to the scalar eddy diffusivity representation of turbulent diffusion of a passive scalar. The corrections are linear in the mean velocity gradients. All model constants are computed theoretically. A form of the theory valid at arbitrary Reynolds number is derived. The theory applies only when convection of the velocity-scalar correlation can be neglected. A ratio of diffusivity components, found experimentally to have a nearly constant value in a variety of shear flows, is computed theoretically for flows in a certain state of equilibrium. The theoretical value is well within the fairly narrow range of experimentally observed values. Theoretical predictions of this diffusivity ratio are also compared with data from experiments and direct numerical simulations of homogeneous shear flows with constant velocity and scalar gradients.

Rubinstein, Robert↗
DOE OSTI2024

Generation of shear flows induced by AE / EPM in LHD plasma

The generation of shear flows (SFs) by Alfven Eigenmodes (AEs) and energetic particle modes (EPMs) have important effects on the operation of future nuclear fusion reactors, because SFs regulate the saturation of the AEs/EPMs, the transport of EPs and thermal plasma, as well as the formation of transport barriers among other consequences. The aim of this study is the analysis of SFs generation during the saturation phase of AEs and EPMs in LHD plasma. Experiments performed in the 23rd and 24th LHD experimental campaigns are dedicated to explore the destabilization of AEs/EPMs in discharges with different heating patterns, thermal plasma and magnetic field configurations. In particular, the shots 176490 and 179697 show the destabilization of MHD bursts and energetic-ion-driven resistive interchange modes (EIC), respectively. Charge exchange spectroscopy measurements in both discharges indicate that the generation of SFs by AE/EPM is uncorrelated with the perturbation induced by the neutral beam injector (NBI). Nonlinear simulations performed using the gyro-fluid code FAR3d show the generation of zonal structures, especially SFs, induced during the saturation phase of Toroidal Alfven Eigenmodes (TAEs) triggered in the MHD burst as well as by the 1/1 EIC in the bursting phase. The simulations indicate that SFs are caused by the radial electric fields powered by energy transfers from the unstable AE/EPM towards the thermal plasma. The strongest SFs are measured during the EIC bursting phase once the 1/1 EPM overlaps with nearby resonances at the plasma periphery. Likewise, the largest SFs during the MHD burst are observed once TAEs radially overlap in the inner-middle plasma region.

AE↗
NASA NTRS1979

Plotting shear-flow forces

Structural analysts can use computer program to study shear-flow and in-plane forces characteristic of quadrilateral panels subjected to different loading conditions. Digital outputs are presented for engineers and management, with various options to allow bulk of data to be analyzed quickly.

Furuike, T.↗
NASA NTRS1982

Calculation of pressure statistics in turbulent free shear flows by direct numerical simulation

Accurate numerical simulations of turbulent free shear flows were performed in order to study the behavior of certain critical turbulence quantities which have been difficult to measure in the laboratory. The three-dimensional time-dependent nonlinear Navier-Stokes equations are solved by the direct numerical simulation technique without turbulence modeling or ad hoc closure assumptions. The pressure interaction terms were factored into diffusion and return-to-isotropy components according to two models. Simulations of the evolution of a turbulent wake with and without swirl present were performed at sufficiently high Reynolds numbers to insure that the flows were strongly nonlinear and turbulent, but low enough so that all scales of motion containing significant energy are adequately resolved. It is noted that the presence of swirl tends to enhance the amplitude of the rms pressure levels.

Metcalfe, R. W.↗
NASA NTRS1992

Modeling of the reactant conversion rate in a turbulent shear flow

Results are presented of direct numerical simulations (DNS) of spatially developing shear flows under the influence of infinitely fast chemical reactions of the type A + B yields Products. The simulation results are used to construct the compositional structure of the scalar field in a statistical manner. The results of this statistical analysis indicate that the use of a Beta density for the probability density function (PDF) of an appropriate Shvab-Zeldovich mixture fraction provides a very good estimate of the limiting bounds of the reactant conversion rate within the shear layer. This provides a strong justification for the implementation of this density in practical modeling of non-homogeneous turbulent reacting flows. However, the validity of the model cannot be generalized for predictions of higher order statistical quantities. A closed form analytical expression is presented for predicting the maximum rate of reactant conversion in non-homogeneous reacting turbulence.

Frankel, S. H.↗
DOE OSTI2021

A unified theory of zonal flow shears and density corrugations in drift wave turbulence

A unified theory of zonal flow shears and density corrugations in drift wave turbulence is presented. Polarization and density advection beat excitation are studied in combination with modulational response. Noise is driven by two-time flux correlation. While the effective zonal flow eddy viscosity can go negative, the zonal diffusivity is positive definite. There is no inverse cascade of density corrugation. The connection between avalanches and corrugations is discussed. Here, the zonal cross-correlation is identified and calculated. Conditions for alignment of zonal shears and corrugation gradients are determined, and the implications for staircase structure are discussed. We show that the synergy of beat noise and modulational effects is stronger than either alone. Strong zonal flows can be excited well below the modulational instability threshold. In the context of L–H transition, zonal noise quenches turbulence overshoot by eliminating the threshold for zonal flow excitation. The power threshold for L–H transition is lowered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

Turbulence suppression in free shear flows by controlled excitation

Turbulence suppression in the near field of a free shear flow under controlled excitation is investigated in four circular jets, a plane jet, and a plane mixing layer. The suppression is a consequence of an excitation-induced modification of the shear layer structure and occurs at the excitation frequency corresponding to the maximally unstable disturbance frequency of the initial free shear layer. The most pronounced suppression occurs when the shear layer is excited at a frequency 40% higher than the natural roll-up frequency. Excitation at a Strouhal number of about 0.017 produces a rapid roll-up and early breakdown of the shear layer, and thus inhibits the formation of the energetic large-scale vortices which otherwise survive farther downstream, grow to larger sizes, and undergo successive pairings in the corresponding unexcited flow.

Zaman, K. B. M. Q.↗
DOE OSTI2022

Thermally fluctuating, semiflexible sheets in simple shear flow

Fluctuating semiflexible sheets dispersed in a fluid are simulated under simple shear flow. A dynamical crumpling transition is observed, flipping statistics are quantified, and rheological properties are estimated for dilute suspensions of sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Numerical simulation of a compressible homogeneous, turbulent shear flow

A direct, low Reynolds number, numerical simulation was performed on a homogeneous turbulent shear flow. The full compressible Navier-Stokes equations were used in a simulation on the ILLIAC IV computer with a 64,000 mesh. The flow fields generated by the code are used as an experimental data base, to examine the behavior of the Reynols stresses in this simple, compressible flow. The variation of the structure of the stresses and their dynamic equations as the character of the flow changed is emphasized. The structure of the tress tensor is more heavily dependent on the shear number and less on the fluctuating Mach number. The pressure-strain correlation tensor in the dynamic uations is directly calculated in this simulation. These correlations are decomposed into several parts, as contrasted with the traditional incompressible decomposition into two parts. The performance of existing models for the conventional terms is examined, and a model is proposed for the 'mean fluctuating' part.

Feiereisen, W. J.↗
NASA NTRS1986

The MSU free shear flow facility

A free shear layer wind tunnel has been constructed in order to undertake detailed, high quality transverse vorticity measurements in an isothermal, single stream mixing layer. The large 50 x 80 cm primary flow and 3-m test section length allows the generation of large, isolated vortical motions in high Reynolds number flow. A uniformly developed, irrotational secondary flow is achieved by means of an entrainment module.

Disimile, P. J.↗
NASA NTRS1980

Characterization of acoustic disturbances in linearly sheared flows

Inviscid fluctuations in a compressible linearly sheared, but otherwise homogeneous, parallel two-dimensional flow are considered. The equation describing the plane wave propagation (PWP), the stability, or the rectangular duct mode characteristics in such a flow is shown to be reducible to Whittaker's equation. The exact solutions are applied to problems of PWP and stability in linearly sheared flows as limiting cases in which the speed of sound goes to infinity (incompressible limit) or the shear layer thickness, or wave number, goes to zero (vortex sheet limit). With respect to the PWP it is shown that the shear layer possesses no resonances and no Brewster angles, while with regard to the problem of the stability of a finite thickness shear layer with a linear velocity profile, it is shown that the thin layer is unstable to long wavelength disturbances for all Mach numbers.

Koutsoyannis, S. P.↗
NASA NTRS1973

Laboratory vortices in rotating, sheared flow.

By placing a small convective source (electrical heater) in a rotating, vertically sheared, stratified flow in a rotating annulus, a well-organized vortex flow is generated. A qualitative description of the flow is given. The flow is always cyclonic below the heater and anticyclonic above, and is quite persistent in the sheared flow.

Kaiser, J. A. C.↗
NASA NTRS1980

Turbulent structures in wall-bounded shear flows observed via three-dimensional numerical simulators

Three recent simulations of tubulent shear flow bounded by a wall using the Illiac computer are reported. These are: (1) vibrating-ribbon experiments; (2) study of the evolution of a spot-like disturbance in a laminar boundary layer; and (3) investigation of turbulent channel flow. A number of persistent flow structures were observed, including streamwise and vertical vorticity distributions near the wall, low-speed and high-speed streaks, and local regions of intense vertical velocity. The role of these structures in, for example, the growth or maintenance of turbulence is discussed. The problem of representing the large range of turbulent scales in a computer simulation is also discussed.

Leonard, A.↗