Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Mesofluidic Inline Separation for Produced Water Treatment

Mesofluidic inline separation developed by PNNL represents an opportunity to remove a key barrier in the treatment of produced water, namely suspended solids that clog downstream operations. The US alone produces over 800 billion gallons of produced water each year, most of which is reinjected underground (but not into the aquifers) as waste. The impact from treating and reusing even a fraction of this wastewater is immense as aquifers in the Midwest and elsewhere dry. The work described herein is essential to leveraging the opportunity to improve produced water quality (to allow for beneficial use) by combining mesofluidic inline separators with reverse osmosis systems. Providing water for agricultural and industrial uses in the American Southwest and Midwest by allowing the reuse of petroleum produced water may be critical to the long-term economics of the region. This is especially true as drought conditions are rapidly lowering aquifer levels in these regions. The incumbent technology for desalination is reverse osmosis (RO) due to its ability to treat a wide range of feedwaters and technological maturity. However, suspended solids cause RO (and other dissolved solids removal technologies) to become clogged and loose performance. A common strategy is to use prefilters upstream of RO systems, but these membrane-based filters easily clog and require regular maintenance. Unlike membrane filters, mesofluidic inline separators provide removal of suspended solids with much lower pressure drops than conventional systems filtration systems, permitting substantially higher flowrates. Although the amount of produced water from petroleum operations is vast, only a small fraction of it is reused or turned into potable water, for example, because of the lack of technologies to remove both dissolved and suspended solids at a significant throughput. This project shows that mesofluidic inline separators coupled with a commercial dissolved solids removal technology (RO) are positioned to do exactly that. Mesofluidic inline separators fit within commercial piping and are tunable for particle sizes of interest as described below. Indeed, mesofluidic inline separators have remarkably smaller footprints than competing filtration technologies and are easily transportable from jobsite to jobsite. This technology has no moving parts so that solids removal can be accomplished at much lower operating cost.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Generalizable Porous Aromatic Framework‐Included Polymer Membranes for Diffusion‐Enhanced Gas Separations

Industrial separation processes account for 10-15% of global energy consumption. Membrane-based processes are less energy-intensive than traditional gas separation technologies; however, enhanced material separation performance and stability for numerous gas mixtures are needed for widespread industrial adoption. This work presents a generalizable strategy for preparing mixed-matrix gas separation membranes exceeding the performance upper bounds of existing polymer membranes for a wide variety of industrial gases. By incorporating robust porous aromatic framework (PAF) particles into various dense commercial polymer matrices, gas diffusivity and solubility can be enhanced. For diverse gas mixtures (e.g., CO2/N2, O2/N2, He/CH4, H2/N2, and C2H4/C2H6), the resulting composite membranes exhibit enhanced gas permeabilities-by as much as 520%-and largely unchanged selectivities even after 6 years of aging under simulated flue gas conditions. These improvements arise from the ultrahigh porosity, excellent chemical compatibility, and unique physicochemical properties of the embedded PAF particles. Functionalizing the PAFs with polyamines also enables composite membranes that achieve among the highest reported performances against plasticization, a common obstacle in commercializing gas separation membranes. Significantly, the PAF-1 particles are readily dispersible in various common membrane casting solvents, suggesting their broader utility as a filler for designing high-performance membranes for many industrial gas separations.

Uliana, Adam A↗
DOE OSTI2023

Metal‐Organic Frameworks for C6 Alkane Separation

Abstract The separation of alkane isomers is an important yet challenging process in the petrochemical industry. Being a crucial step to produce premium gasoline components as well as optimum ethylene feed, the current industrial separation by distillation is extremely energy intensive. Adsorptive separation based on zeolite is limited by insufficient adsorption capacity. Metal‐organic frameworks (MOFs) hold enormous promise as alternative adsorbents due to their diverse structural tunability and exceptional porosity. Precise control of their pore geometry/dimensions has led to superior performance. In this minireview, we highlight the recent progresses in developing MOFs for the separation of C6 alkane isomers. Representative MOFs are reviewed based on their separation mechanisms. Emphasis is put on the material design rationale for achieving optimal separation capability. Finally, we briefly discuss the existing challenges, possible solutions, and future directions of this important field.

Xie, Feng↗
DOE OSTI2026

In-Process Melt Separation of Depolymerized PET in PET/PE Blends for Upcycling via Twin-Screw Extrusion

Our previous work focused on depolymerizing polyethylene terephthalate (PET) in twin-screw extrusion, as part of a broader project to continuously separate PET from polyolefins in the melt. This study focused on linear low-density polyethylene (LLDPE) and PET films and the use of ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and bis(2-hydroxyethyl) terephthalate (BHET) to depolymerize the PET in the extruder to levels above 90% Mw. In this work, the focus will shift to achieving separation of the two polymers in the twin-screw extruder, which is made possible due to a 90% reduction in the Mw of the PET, which caused a decrease of its viscosity by several orders of magnitude. Owing to the viscosity difference and pressure buildup in the die, the low-viscosity PET preferentially exited a degassing vent instead of going through the die. This is because the flow of the PET would travel through a non-pressure vent rather than through a high-pressure die. However, owing to the higher viscosity of the LLDPE, the pressure was too high to pass through such a small diameter vent hole. Supercritical CO 2 (SCCO 2 ) was used to assist in this extraction, but SCCO 2 negatively impacted the overall degree of separation. Through analysis of the separated materials, it was concluded that a high separation of the two materials was achieved. TGA and FTIR confirmed that the material separated from the vent was 100% PET. The material removed from the die was composed of 95% LLDPE and 5% PET.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Separation of rare earth element radioisotopes by reverse-phase high-speed counter-current chromatography

Analytical scale purification of rare earth element (REE) radioisotopes is typically accomplished using cation-exchange resins (e.g. AG 50W-X8) and high-performance liquid chromatography (HPLC). Despite the variety of improvements made since the development of this separation process in the 1950s, nearest neighbor separations remain a challenge, as does the issue of irreversible sample adsorption. Herein, we report a study that evaluates the potential of high-speed counter-current chromatography (HSCCC) as an alternative method for purifying REE elements, with specific reference to separations of fission product REE of interest to nuclear forensics. Complementary HSCCC REE separation experiments, one spiked with radiotracer and REE fission product activity, allowed for in depth analysis of resulting fractions from both an elemental (inductively coupled plasma atomic emission spectroscopy, ICP-AES) and radiological (gamma-ray spectrometry, beta counting) purity perspective. The highly reproducible nature of separation profiles generated from HSCCC instruments was leveraged to simplify work-up of samples containing radioisotopes. Subsequent radioanalytical evaluation revealed minimal carryover of Eu into neighboring Sm and Tb fractions (as indicated by presence of 150Eu), and trace contamination of the Tb fraction with Y (as indicated by presence of 91Y). Subtle differences in stationary phase retention across the two columns were reflected in significant variations in decontamination factors of duplicate parallel separations. Furthermore, these differences paired with obtained distribution of radioisotopes provided valuable insights into future improvements. Collectively, this study represents a significant step forward in development of HSCCC technology for task specific REE radioisotope purification.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Sequential separation of battery electrode materials and metal foils in aqueous media

To recycle high-value lithium-ion battery components, it is imperative to efficiently separate electrode materials from current collector foils and to separate cathodes from anodes. This study investigates the delamination behaviors of cathodes and anodes from their respective current collectors in aqueous media. Whereas anode films can easily detach from copper foils in water, the delamination of cathode films does not exhibit the same behavior in water; instead, the cation exchange reaction results in lithium leaching and aluminum corrosion in the presence of water. Here, a buffer solution with surfactant additives has been designed to prevent aluminum corrosion and to improve solution wetting behavior, thereby facilitating cathode delamination. The delamination difference enables the sequential recovery of electrode materials and metal foils at different separation stages, simplifying the traditionally intricate processes within a one-pot recovery system. The recovered materials retain their crystal structure and morphology, and there are no signs of aluminum corrosion or residues on the metal foils. The sequential separation technique achieves nearly 100% separation efficiency for electrode materials from metal foils and over 98% separation efficiency for cathode and anode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Separation characteristics of cations and natural organic matter in electrodialysis

Natural organic matter (NOM) in water can cause the formation of disinfection byproducts (DBPs) when NOM reacts with a disinfectant such as chlorine. Nanofiltration (NF) and reverse osmosis (RO) are effective treatment methods to remove NOM. However, the simultaneous presence of both NOM and divalent cations such as Ca 2+ can enhance fouling in NF and RO. Therefore, an appropriate pretreatment to remove such cations before NF or RO would delay fouling and perhaps improve water recovery and NOM removal efficiency. Electrodialysis (ED) is potentially an excellent pretreatment method because it separates inorganic ions well using ion exchange membranes (IEMs) but does not separate NOM well because of its size and consequent low diffusivity. This research focused on ion and NOM separation with ED using three different types of commercially available IEM pairs, two different commercially available NOM sources, and six different influents at 500 mg/L total dissolved solids in the presence or absence of both hardness (Ca 2+ and Mg 2+ ) and NOM. The target waters of interest in this research were drinking water supplies that require little or no desalination but substantial removal of NOM; after NOM separation in NF or RO, some or all of the ED concentrate can be added to the NF/RO permeate to create the finished water prior to disinfection. The results indicate that ED can effectively separate alkaline earth metal ions without separation of NOM. Cation exchange membranes with high exchange capacity, high selectivity for divalent cations are desirable, and both anion and cation exchange membranes should have low affinity for organic adsorption. As a result, the process would work particularly well for NOM with relatively low hydrophobicity, since NOM adsorption to most surfaces increases with hydrophobicity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fiber Sorbents – A Versatile Platform for Sorption-Based Gas Separations

Increasing demand for high-purity fine chemicals and a drive for process intensification of large-scale separations have driven significant work on the development of highly engineered porous materials with promise for sorption-based separations. While sorptive separations in porous materials offer energy-efficient alternatives to longstanding thermal-based methods, the particulate nature of many of these sorbents has sometimes limited their large-scale deployment in high-throughput applications such as gas separations, for which the necessary high feed flow rates and gas velocities accrue prohibitive operational costs. These processability limitations have been historically addressed through powder shaping methods aimed at the fabrication of structured sorbent contactors based on pellets, beads or monoliths, commonly obtained as extrudates. These structures overcome limitations such as elevated pressure drops commonly recorded across powder adsorption beds but often accrue thermal limitations arising from elevated particle density and aggregation, which ultimately cap their maximum separation performance. Furthermore, the harsh mechanical strain to which powder particles are subjected during contactor fabrication, in the form of extrusion/compression forces, can result in partial pore occlusion and framework degradation, further limiting their performance. Here, we present the development of porous fiber sorbents as an alternative sorbent contactor design capable of addressing sorbent processability limitations while enabling an array of performance-maximizing heat integration capabilities. This new sorbent form factor leverages pre-existing know-how from hollow fiber spinning to produce fiber-shaped sorbent contactors through the phase inversion of known polymers in a process known as dry-jet/wet quenching. The process of phase inversion allows microporous sorbent particles to be latched onto a macroporous polymer matrix under mild processing conditions, thus making it compatible with soft porous materials prone to amorphization under traditional pelletization conditions. Sorbent fibers can be created with different geometries through control of the spinning apparatus and process, offering the possibility to produce monolithic and hollow fibers alike, the latter of which can be integrated with thermalization fluid flows. In this Account, we summarize our progress in the field of fiber sorbents from both design and application standpoints. We further guide the reader through the evolution of this field from the early inceptive work on zeolite hollow fibers to recent developments on MOF fibers. We highlight the versatile nature of fiber sorbents, both from the composition, fabrication and structure points of view, and further demonstrate how fiber sorbents offer alternative paths in tackling new and challenging chemical separation challenges like direct air capture (DAC), with a final perspective on the future of the field.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Solvent Selection for the Separation of Lignin-Derived Monomers Using the Conductor-like Screening Model for Real Solvents

The separation of desired monomers from a liquid-phase mixture of lignin depolymerization products is necessary to facilitate their upscaling and upgrading for industrial applications. One effective method to separate multiple liquid-phase products is countercurrent chromatography (CCC), which is a common liquid chromatography technique that separates target solutes based on differences in their partitioning in a biphasic solvent system. Effective CCC separation requires the selection of solvent compositions to tune solute partition coefficients. Here, to alleviate the experimental burden of selecting optimal solvent systems, we apply the conductor-like screening model for real solvents (COSMO-RS) method to compute partition coefficients of representative lignin monomers from four currently used depolymerization strategies in standard solvent systems. We further design new ternary and quaternary solvent systems that are predicted to further improve separation efficacy. On the basis of these predicted partition coefficients and empirical solvent selection criteria for CCC measurements, we suggest a range of solvent systems that would be suitable for the effective separation of aromatic lignin-derived products via CCC or similar liquid–liquid extraction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Single-Molecule Fluorescence Investigations of Solute Transport Dynamics in Nanostructured Membrane Separation Materials

Many materials used for membrane separations comprise of nanoscale structures such as pores and domains. Such nanostructures often control the solute permeability and selectivity of separation membranes. Thus, for future development of highly efficient separation membranes, it is important to understand the structural and chemical properties of these nanostructures, and also their influences on solute transport dynamics. For the last two decades, single-molecule fluorescence techniques have been used to measure the detailed dynamics of solute molecules diffusing in various nanostructured materials, giving valuable insights into molecular transport mechanisms influenced by nanoscale material heterogeneity. This Perspective will discuss recent single-molecule fluorescence studies on solute diffusion in materials relevant to membrane separations, including dense polymer films and nanoporous materials. These studies have revealed the formation and properties of nanostructures, and unique transport dynamics of solute molecules manipulated by their confinement and partitioning to the nanostructures, which play key roles in membrane separations. Furthermore, this Perspective will also point out scientific challenges toward thorough understanding of molecular-level mechanisms in membrane separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Flexible MOFs as Pressure-Tunable Filters for Hydrocarbon Separation

Metal–organic frameworks (MOFs) hold significant promise for separating gas mixtures, especially hydrocarbons. While the main focus in the field is the development of new adsorbents for specific separations of binary mixtures, a preferable situation would be using a single framework for separating various species. This has been achieved in some flexible MOFs, where ternary mixtures can be separated at different temperatures. Here, we propose a simple yet fascinating way of utilizing the flexibility of MOFs to create tunable filters as a function of external pressure. We thus replace the more costly temperature-driven tunability with a cost-efficient external-pressure tunability. As a proof-of-concept, we select the CaMOF flexible framework for C6 hydrocarbon separation, however, our results are applicable to other flexible framework and gas molecules. Furthermore, our findings provide mechanistic insight and guidelines to engineer separation filters by designing flexible pores with critical sizes that can be effectively manipulated by external pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Significance of a Solid Electrolyte Interphase on Separation of Anode and Cathode Materials from Spent Li-Ion Batteries by Froth Flotation

The separation of electrode active materials from spent Li-ion batteries (LIBs) by froth flotation is challenging due to the changes in surface properties of electrode active materials from cycling as well as the presence of organic binders. In this work, the froth flotation separation of aged anode and cathode composite materials from spent LIBs was systematically investigated after the materials were heat treated. The results show that aged anode and cathode materials from spent LIBs can be well separated from each other after a heating process in air at 400 degrees C and at which some of the PVDF binder remains intact. The underlying mechanism was investigated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX). The results from the XPS and contact angle measurements show that there is a hydrophilic and oxygen-rich layer on the surface of aged anode materials. This hydrophilic surface, associated with the solid electrolyte interface (SEI) layer, impacts the froth flotation process significantly. The results also show that both the SEI layers and PVDF binder residues on the surface are removed at 400 degrees C for an hour, restoring the hydrophobicity of the anode materials, which, in turn, benefits the separation of anode and cathode materials. The STEM/EDX elemental analysis data confirms that there are 20 nm-thick oxygen-rich SEI layers on the surfaces, which can be removed after a heating process. The present result illustrates the significance of the SEI layers in flotation separation of electrode materials and sheds new lights into the future development of the recycling processes for the separation of anode and cathode composite materials from spent Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Customizable Aperture Geometry in Metal–Organic Frameworks for Kinetic Hydrocarbon Separation

Precise control of aperture dimensions is crucial in adsorptive separations of hydrocarbons, as it directly affects key parameters such as selectivity, capacity, diffusion, and recyclability. The development of metal–organic frameworks (MOFs) has enabled the fine-tuning of local pore environments to address important hydrocarbon separations. However, customizing the aperture geometry to tune the kinetic separation performance remains challenging. Here, we deploy a mixed-linker synthesis strategy, combining long and short linkers on fcu net Zr-MOFs with equilateral triangular apertures to construct isoreticular multivariate MOFs, NU-415 and NU-416, with tailored isosceles triangular apertures suitable for the separation of hexane isomers. Sorption, liquid batch separation, and X-ray diffraction measurements demonstrate significantly improved selectivity, capacity, stability, and recyclability of NU-415 and NU-416 compared with Zr-muconate and MOF-801. Notably, both NU-415 and NU-416 achieve uptake capacities of 2.2 mmol g –1 in 1 min with an n-hexane to 2,2-dimethylbutane selectivity over 200 in an equimolar ternary mixture at ambient conditions, comparable to leading reported materials. Mechanistic studies confirm that separation performance is predominantly governed by significant kinetic differences rather than by thermodynamics. Furthermore, the successful customization of aperture geometry not only enables superior linear to monobranched hexane selectivity in NU-415 but also demonstrates the mixed-linker synthesis strategy as a promising solution for precise and predictable pore architecture control in MOFs.

Adsorption↗
DOE OSTI2025

Solvent Polarity Independent Symmetry-Breaking Charge Separation in a Slip-Stacked Covalent Terrylene Monoimide Dimer

The design of organic materials capable of efficient photoinduced charge separation in low-polarity environments is a critical challenge for advancing organic photovoltaics. Symmetry-breaking charge separation (SB-CS) offers a promising route to efficient charge separation with minimal energy loss; however, in conventional organic materials this process typically relies on polar solvents to stabilize the charge-separated state. Here, we investigate a slip-stacked terrylene monoimide dimer (TMI 2 ) engineered with intrinsic electronic asymmetry to circumvent this limitation. We demonstrate through a comprehensive suite of ultrafast spectroscopic techniques that TMI 2 undergoes remarkably efficient SB-CS regardless of solvent polarity enabled by the permanent dipole moment of TMI and the accessible intramolecular charge-transfer (ICT) character of its monomer units. Furthermore, analysis of vibronic coherences reveals that the initial state mixing is actively driven by a 193 cm –1 intermolecular mode, while the final SB-CS state is marked by a distinct vibrational fingerprint of the radical ion pair product. Our findings reveal how the intrinsic electronic asymmetry of the TMI monomers that constitute TMI 2 creates an efficient charge separation pathway that precludes the need for external stabilization from a polar solvent. Here, this work establishes a powerful molecular design principle for leveraging intrinsic monomeric asymmetry to achieve efficient charge separation in low-dielectric environments, with significant implications for the development of next-generation organic optoelectronic materials.

Aromatic compounds↗
DOE OSTI2026

Lanthanide Separations through Helicate Self-Assembly

Skyrocketing demand for rare-earth elements makes their isolation and reuse from electronic waste an increasingly attractive alternative to mining. Typically, the capture of individual lanthanides from mixtures requires the iterative design of complex, macrocyclic ligands, a sometimes successful but often laborious process. Here we show that the self-assembly of rare-earth ions with a ditopic ligand, L d , results in the selective incorporation of smaller lanthanides and gives rise to impressive separation factors. Comparison to a monotopic ligand, L m , shows that the separation performance of ditopic L d critically depends on the presence of two adjacent binding sites. Isothermal titration calorimetry (ITC) experiments show that the selectivity of L d for smaller ions is thermodynamically driven and provide evidence of positive cooperativity among the two binding sites of L d . The simplicity of the separation procedure reported here, requiring only 1 min of sonication in methanol, shows the potential applicability of this approach to real-world separations. Here, by achieving efficient rare-earth separations in small, synthetically facile helicates, this work shows the promise of self-assembly as a mechanism to drive metal separations.

Alcohols↗
DOE OSTI2022

Solvent-driven fractional crystallization for atom-efficient separation of metal salts from permanent magnet leachates

Abstract This work reports a dimethyl ether-driven fractional crystallization process for separating rare earth elements and transition metals. The process has been successfully applied in the treatment of rare earth element-bearing permanent magnet leachates as an atom-efficient, reagent-free separation method. Using ~5 bar pressure, the solvent was dissolved into the aqueous system to displace the contained metal salts as solid precipitates. Treatments at distinct temperatures ranging from 20–31 °C enable crystallization of either lanthanide-rich or transition metal-rich products, with single-stage solute recovery of up to 95.9% and a separation factor as high as 704. Separation factors increase with solution purity, suggesting feasibility for eco-friendly solution treatments in series and parallel to purify aqueous material streams. Staged treatments are demonstrated as capable of further improving the separation factor and purity of crystallized products. Upon completion of a crystallization, the solvent can be recovered with high efficiency at ambient pressure. This separation process involves low energy and reagent requirements and does not contribute to waste generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Separation of Hydrogen Using Pd/Ag Membranes: Experimental and Modeling Results with Potential Application to Direct Internal Recycle

Implementation of fusion energy requires processing the deuterium-tritium (D-T) mixture used to fuel the reaction, and separation of hydrogen isotopes from other gases is imperative. Specifically, the separation of hydrogen isotopes from helium is a matter of importance to the fusion fuel cycle community. Initial testing with a palladium-silver (Pd-Ag) membrane indicates that even moderate vacuum (~100 torr permeate pressure) can provide a high degree of separation (>90%) at a high ratio of H 2 to He. Given the presence of He in many fusion systems, a high technology readiness level (TRL) for Q 2 /He (where Q represents any isotope of hydrogen) separations is needed. This study demonstrates the efficacy of H 2 removal from He via permeation and potential applications for direct internal recycle. Modeling will accompany the experimental campaign to generate a predictive capability and quantify the separation performance. Modeling from previous hydrogen permeation studies has demonstrated that the typical Sieverts’ law fails to predict the measured permeation rates at high hydrogen fluxes. Existing models are being refined to integrate the effects of surface phenomena into permeation predictions, which have been expanded to account for mixtures with large ranges of Q 2 concentrations. These data will improve the TRL of permeators as a separation technology for the fusion fuel cycle.

08 HYDROGEN↗
DOE OSTI2022

Experimental Results for Large Particle Separation from Non-Newtonian Slurries Using Tapered Bump Arrays

Lateral displacement arrays are useful for separating particles such as blood cells and sand from carrier fluids. These arrays consist of staggered posts, which allow smaller particles to follow streamlines and larger particles to flow around the posts and migrate to one side. This migration increases the particle concentration in one direction and depletes the particle concentration in the other direction allowing particle separation to occur. Experiments were conducted to separate large particles in non-Newtonian yield stress slurries using tapered bump arrays. The non-Newtonian slurry used was composed of a bentonite kaolin blend with the inclusion of larger diameter particles. These experiments were conducted to evaluate the performance of particle separation using a tapered array of staggered posts as configured in a bump array for non-Newtonian yield stress slurries, an application that has not been explored experimentally. A theory for large particle separation was developed for slurries that exhibit Bingham or Cross rheology. The results of these experiments are described. This information could be applied in industrial settings such as separation of particles from nuclear waste slurries including those to be processed at the Hanford site, where removing large particles from waste streams is important to processing.

slurry, solids removal, deterministic lateral disp↗