Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “selection methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Turnkey CAD/CAM selection and evaluation

The methodology to be followed in evaluating and selecting a computer system for manufacturing applications is discussed. Main frames and minicomputers are considered. Benchmark evaluations, demonstrations, and contract negotiations are discussed.

Moody, T.↗

Improved effectiveness of GPS RAIM through ridge regression signal processing

A measurement processing method has been developed which markedly improves the GPS Receiver Autonomous Integrity Monitoring (RAIM) software-based algorithm system's effectiveness in detecting satellite signal failures. Detection is via the consistency of a redundant set of pseudorange measurements. When five satellites are in view, five different subsolutions can be calculated; the integrity alarm is triggered on the basis of subsolution comparisons. Because a poor distribution of the satellites also causes RAIM subsolution scattering, a methodology for selecting the covariance matrix is presented which incorporates ridge regression into a Kalman filter.

Kelly, Robert J.↗

A method for tailoring the information content of a software process model

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to set of accepted processes and products for achieving each criterion; (5) Select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

Perkins, Sharon↗

A method for tailoring the information content of a software process model

The framework is defined for a general method for selecting a necessary and sufficient subset of a general software life cycle's information products, to support new software development process. Procedures for characterizing problem domains in general and mapping to a tailored set of life cycle processes and products is presented. An overview of the method is shown using the following steps: (1) During the problem concept definition phase, perform standardized interviews and dialogs between developer and user, and between user and customer; (2) Generate a quality needs profile of the software to be developed, based on information gathered in step 1; (3) Translate the quality needs profile into a profile of quality criteria that must be met by the software to satisfy the quality needs; (4) Map the quality criteria to a set of accepted processes and products for achieving each criterion; (5) select the information products which match or support the accepted processes and product of step 4; and (6) Select the design methodology which produces the information products selected in step 5.

Perkins, Sharon↗

Dynamic coordination of a self-reconfigurable manipulator system

The authors present the dynamic coordination of a self-reconfigurable manipulator system capable of changing its mechanical structure according to given task requirements. The self-reconfiguration is achieved by reconfiguring the topology of a dual-arm system through serial, parallel, and bracing structures. Particular emphasis is placed on the dynamic coordination of two arms having three different dual-arm topologies. The authors develop the Cartesian space dynamic models of a dual-arm system of three dual-arm topologies and derive the kinematic and dynamic constraints imposed on two arms in cooperation. Dual-arm dynamic manipulabilities are defined to quantify the dynamic performance of three dual-arm topologies in terms of the efficiency of generating Cartesian accelerations. A methodology of selecting serial, parallel, and bracing structures based on dual-arm dynamic manipulabilities is provided.

Kim, Sungbok↗

Use of GC/MS and Microtome Techniques as Methods to Evaluate ODC Free Cleaner Diffusion and Evaporation in Insulation and Phenolic Case Material

Because of the 1990 Clean Air Act Amendment (CAAA) many chlorinated solvents used in the aerospace industry are being phased out. Replacement of the ODC (ozone-depleting chemicals) with less volatile, non-ozone depleting cleaners has been extensively studied over the past seven years at Thiokol Propulsion, a Division of Cordant Technologies, Inc. The down selection of ODC replacement cleaners has been based on several factors including the diffusion evaporation of the cleaners in selected substrates. Methodologies were developed to evaluate the cleaner content in substrates. Methods of cutting thin slices of material (microtoming) were combined with GC/MS (gas chromatography/mass spectroscopy) analysis. Substrates evaluated in this study include potential solid rocket motor materials: ASNBR (asbestos-filled nitrile butadiene rubber) and CFEPDM (carbon-filled ethylene propylene dimonomer) insulation and glass (GCP), carbon (CCP) and silica (SCP) cloth phenolic substrates with fibers either parallel (0 deg) or perpendicular (90 deg) to the surface. Residue profiles indicate both cleaner and substrate composition affect the diffusion and subsequent evaporation of the cleaner from the substrate surface.

Biegert, L. L.↗

Constellations of elliptical inclined lunar orbits providing polar and global coverage

Prior results have developed a methodology for selecting a long-lived constellation of 3 satellites that provide persistent, stable coverage to either the North or South Pole with no requirement for stationkeeping under the influence of only gravitational perturbations. In the present study, the sensitivity of this coverage in the presence of non-gravitational forces is determined, and a design strategy is formulated that minimizes any potential sensitivity to these accelerations.

lunar constellation design↗

Aerothermal Ground Testing of Flexible Thermal Protection Systems for Hypersonic Inflatable Aerodynamic Decelerators

Flexible TPS development involves ground testing and analysis necessary to characterize performance of the FTPS candidates prior to flight testing. This paper provides an overview of the analysis and ground testing efforts performed over the last year at the NASA Langley Research Center and in the Boeing Large-Core Arc Tunnel (LCAT). In the LCAT test series, material layups were subjected to aerothermal loads commensurate with peak re-entry conditions enveloping a range of HIAD mission trajectories. The FTPS layups were tested over a heat flux range from 20 to 50 W/cm with associated surface pressures of 3 to 8 kPa. To support the testing effort a significant redesign of the existing shear (wedge) model holder from previous testing efforts was undertaken to develop a new test technique for supporting and evaluating the FTPS in the high-temperature, arc jet flow. Since the FTPS test samples typically experience a geometry change during testing, computational fluid dynamic (CFD) models of the arc jet flow field and test model were developed to support the testing effort. The CFD results were used to help determine the test conditions experienced by the test samples as the surface geometry changes. This paper includes an overview of the Boeing LCAT facility, the general approach for testing FTPS, CFD analysis methodology and results, model holder design and test methodology, and selected thermal results of several FTPS layups.

Bruce, Walter E., III↗

Strategies for Choosing Descent Flight-Path Angles for Small Jets

Three candidate strategies for choosing the descent flight path angle (FPA) for small jets are proposed, analyzed, and compared for fuel efficiency under arrival metering conditions. The strategies vary in operational complexity from a universally fixed FPA, or FPA function that varies with descent speed for improved fuel efficiency, to the minimum-fuel FPA computed for each flight based on winds, route, and speed profile. Methodologies for selecting the parameter for the first two strategies are described. The differences in fuel burn are analyzed over a year s worth of arrival traffic and atmospheric conditions recorded for the Dallas/Fort Worth (DFW) Airport during 2011. The results show that the universally fixed FPA strategy (same FPA for all flights, all year) burns on average 26 lbs more fuel per flight as compared to the minimum-fuel solution. This FPA is adapted to the arrival gate (direction of entry to the terminal) and various timespans (season, month and day) to improve fuel efficiency. Compared to a typical FPA of approximately 3 degrees the adapted FPAs vary significantly, up to 1.3 from one arrival gate to another or up to 1.4 from one day to another. Adapting the universally fixed FPA strategy to the arrival gate or to each day reduces the extra fuel burn relative to the minimum-fuel solution by 27% and 34%, respectively. The adaptations to gate and time combined shows up to 57% reduction of the extra fuel burn. The second strategy, an FPA function, contributes a 17% reduction in the 26 lbs of extra fuel burn over the universally fixed FPA strategy. Compared to the corresponding adaptations of the universally fixed FPA, adaptations of the FPA function reduce the extra fuel burn anywhere from 15-23% depending on the extent of adaptation. The combined effect of the FPA function strategy with both directional and temporal adaptation recovers 67% of the extra fuel relative to the minimum-fuel solution.

Wu, Minghong Gilbert↗

Design of Quasi-Terminator Orbits near Primitive Bodies

Quasi-terminator orbits are a class of quasi-periodic orbits around a primitive body that exist in the vicinity of the well-known terminator orbits. The inherent stability of quasi-terminator trajectories and their wide variety of viewing geometries make them a very compelling option for primitive body mapping missions. In this paper, we discuss orbit design methodologies for selection of an appropriate quasi-terminator orbit that would meet the needs of a specific mission. Convergence of these orbits in an eccentric, higher-fidelity model is also discussed with an example case at Bennu, the target of the upcoming NASA's OSIRIS-REx mission.

mapping↗

Building Reliable Printed Circuit Boards - the Lessons Learned

"Printed circuit boards (PCBs) are the baseline for electronics manufacturing upon which electronic components are mounted and formed into electronic systems. PCBs are used in a variety of electronic circuits from simple one-transistor amplifiers to large super computers. A PCB serves three main functions: 1) it provides the necessary mechanical support for the components in the circuit 2) it provides the necessary electrical interconnections, and 3) it bears some form of legend which identifies the components it carries. The failure modes on the PCBs can be categorized in a hierarchical structure, in which the mechanisms and causes are site or location dependant. This one day workshop will discuss a variety of failure mechanisms that effect the functionality of PCBs. These mechanisms can be related to how PCB materials are selected, PCBs are designed, manufactured, tested and used in the field conditions. The workshop will begin with an overview of PCB manufacturing, materials and processes. With the help of examples and case studies, a wide range of failure mechanisms will be discussed, case studies are focused on digital circuits, however some failures in analog, double sided boards are also presented. The workshop then provides the guideline for selection of methodologies for identifying potential failure mechanisms based on the failure history and how a systematic root cause failure analysis of the PCB can result in prevention of future issues."

Sood, Bhanu↗

Effect of Geometric Granularity on the Noise Signature of a Full-Scale Large Civil Transport Nose Landing Gear

Results from a comprehensive simulation campaign focused on characterizing the air-frame noise signature of a full-scale Boeing 777-300ER nose landing gear are presented. The as-flown, installed nose gear geometry was used to assess how accurately the selected computational methodology can predict far-field noise before extending the simulation approach to the complete B777-300ER aircraft in landing configuration. To facilitate direct comparisons with experimental data, the simulations were conducted for conditions matching those recorded for a flyby of the same aircraft over the ground-based phased microphone array used during the 2005 Quiet Technology Demonstrator II test. The far-field acoustic footprint of the nose landing gear was computed via a Ffowcs-Williams and Hawkings integral approach, with pressures on the model solid surface or flow quantities on a permeable data surface enclosing the gear used as input. A grid refinement study performed for the baseline gear con-figuration to establish the convergence behavior of the far-field spectrum indicated that the sound pressure levels had converged at frequencies slightly beyond 5 kHz for the finest spatial resolution attempted. To ascertain the effects of geometric granularity on far-field noise, simulations of a defeatured version of the nose gear were undertaken. Comparisons with fully-dressed gear results indicated that finer geometric details add 2–4 dB to the sound pressure levels at mid- to high-frequencies (800 Hz to 5 kHz), suggesting that for accurate noise prediction such details cannot be neglected.

airframe noise↗

Event Report for The Ethical Artificial Intelligence Quantification Workshop

Artificial Intelligence (AI) is a powerful emerging technology area which requires special attention to using it ethically. AI ethics is still an emerging field, and the partners for this workshop and report seek to move AI ethics discussion ahead by experimenting with ways to measure AI ethics criteria. The following document describes the outcomes and learnings from The Ethical Artificial Intelligence Quantification Workshop held at the National Institute for Aerospace (NIA), Hampton, Virginia on May 12th, 2022. The purpose of the workshop was for participants to evaluate and experiment-with the methodology and process presented by AIEthics.World in cooperation with Intel Corporation. The meeting participants learned about the Ethical AI Certification and Maturity Model™ and applied the methodology to selected notional AI systems. The workshop facilitated the evaluation of the maturity of the AI system according to ethical considerations relevant to NASA, NIA and other participants. The workshop consisted of three main phases. The first phase focused on understanding and summarizing NASA’s ethical approaches, mission and values based on published documentation, discussions and individual insights & opinions of participants. This information was prioritized, weighted, ordered, and quantified in phase two, to formulate an alignment between human values (ethics) and their applicability to AI systems during all lifecycle phases. The first two phases were summarized as a form of ethical genealogy for artificial intelligence, specific to NASA’s ethical approaches. In the third and last phase of the workshop the participants evaluated notional examples of artificial intelligence to qualify and quantify its ability to adhere to the organizational ethics approaches, using the Ethical AI Certification and Maturity Model™. The workshop uses the concept of genealogy, in the traditional sense: the study and traceability of lines of ancestors in the process of evolutionary development from earlier forms. However, as it is applied to an Ethical AI definition, it is providing the insights to the necessary and mandatory traceability of content, data, metrics, telemetry, elements, and structures which are used in the AI’s lifecycle to foster and measure AI ethics in all steps of its lifecycle. The Ethical Artificial Intelligence Quantification Workshop provided NASA with the opportunity to apply the Ethical AI Certification and Maturity Model™, in combination with existing and well-known decision-making and quality control methods to identify the metrics and measurements for an Ethical AI and assess its ethical condition and quality aligned with NASA ethics approaches. The result of the workshop is the capacity for NASA to apply the maturity model assessment to its AI Systems as desired and if necessary, publish the ability of these AI Systems to adhere to the organizational ethical goals. AI ethics frameworks need to be customized for each application domain, for example, individual NASA Mission Directorates. General principles that work in one area such as AI/Machine Learning-based text analysis (the ethics of information-extraction) may need to be adapted for another such as sense-and-avoid decision-making in a flight environment. The workshop was conducted among approximately twenty NASA subject matter experts, so the elements noted above should be considered examples, not definitive NASA ethical AI principles, genealogy, etc. Generating a definitive AI ethics framework for an organization as diverse as NASA would require far more discussion, debate, review, etc. However, the workshop provided valuable insight into mechanisms and processes for quantifying AI ethical qualities.

Artificial Intelligence↗

Development of a Test Article to Demonstrate the Long Duration Storage of Liquid Hydrogen via a Two-Stage Active Cooling Approach

A NASA team is developing a test article for the purpose of demonstrating the long duration storage of liquid hydrogen utilizing passive Cryogenic Fluid Management and cryocoolers via a two-stage active cooling approach. Funded by NASA’s Technology Demonstration Mission Program and managed by the Cryogenic Fluid Management Portfolio Project, the team is leveraging demonstrations conducted under pervious NASA activities to develop a fully integrated test article that will demonstrate the zero boil-off storage of liquid hydrogen. This paper discusses the previous activities being leveraged from NASA’s Cryogenic Propellant Storage and Transfer project, the test article design and build, hardware and instrumentation selections, control methodology, and the planned primary and secondary test objectives. The test article assembly and demonstration are both to be conducted in the East Test Area at NASA Marshall Space Flight Center and are currently scheduled for Fiscal Year 2024.

Active Cooling↗

Assessment of Pre-Irradiation SiC CMC Joint Performance in Representative Cladding Geometries

Silicon carbide fiber reinforced, silicon carbide matrix composites (SiC-SiC) offer strength at high temperatures, corrosion resistance, and stability during irradiation, and are being developed by General Atomics as cladding for accident tolerant fuel (ATF) applications and advanced reactor concepts. Advanced joining techniques capable of withstanding harsh reactor environments are key to enable GA’s SiGAtm SiC-SiC composite. The objective of this work is to obtain joint-specific material properties for assemblies in representative planar and cladding geometries that will allow for the generation of a material properties database and more accurate simulation of SiC joint behavior across arange of temperatures and irradiation conditions. To support this, three different joint formulations are being assessed for mechanical and thermal performance pre and post irradiation in the High Flux Isotope Reactor (HIFR) at ORNL. GA has previously identified its hybrid SiC (HSiC) joint as the most promising and best suited joining approach for cladding applications [1]. Additionally, oxide and transeutectic phase (TEP) joints are being investigated to make the material property database more comprehensive as these joints have previously shown strength resilience under irradiation in planar geometries [2]. The thermal and mechanical data obtained in this work will address vital knowledge gaps, enabling more accurate modeling of joints in SiC-based components for accelerated material qualification.The scope of work presented here focuses on the mechanical and thermal performance of the joint material prior to irradiation in HFIR. Endplug push-out (EPPO) testing to determine joint strength in tube geometries, and shear strength testing for planar geometries have provided a benchmark for pre-irradiation mechanical performance. These results show that all three selected joint methodologies result in cladding joints capable of withstanding the expected joint stresses in a LWR reactor environment [3]. This has been accompanied by He leak testing of the joint regions on tube specimens to assess the suitability of each joint methodology for cladding applications. Here, only the HSiC formulation consistently met critical leak rate requirements suggesting that other joining strategies require additional development. Finally, pre-irradiation thermal testing has been completed to establish a baseline for comparison after irradiation. Subsequent irradiation of these joints types in HFIR will provide further detail on joint material properties and their appropriateness for nuclear applications.

Gonderman, Sean↗

Economic and Environmental Assessment of Biological Conversions of Agile BioFoundry (ABF) Bio-Derived Chemicals

Bio-derived chemicals are an essential part of the growing bioeconomy. They possess the potential to boost a new domestic bioproduct industry, improve the sustainability of integrated biomanufacturing, and reduce U.S. dependence on fossil energy. The Agile BioFoundry (ABF) consortium, a Department of Energy (DOE)-sponsored collaboration, is investigating biobased pathways to produce advantaged products including advanced biofuels, fuel intermediates, and bioproducts. ABF is integrating advanced computational tools for biological engineering, process design and data analysis, and economic/sustainability modeling tools into a comprehensive and dynamic platform for biomanufacturing of microbes and using them to produce key metabolic intermediates or beachhead molecules which may be derivatized into several distinct bioproducts of industrial interest. In this presentation, we first discuss a methodology to select a single exemplar product molecule to represent each beachhead pathway based on similarities with other end-molecule options (yields/titers/rates, fermentation operation mode, oxygen requirements, general separations challenges, etc.), in order to maintain a reasonable number of cases for rigorous process simulation. We then use techno-economic analysis (TEA) and life-cycle analysis (LCA) to highlight sensitivities and trends around economic performance and environmental footprint, reflecting examples for two selected ABF technology pathways to bio-derived chemicals: 1) adipic acid production via muconic acid fermentation from mixed sugars with Pseudomonas putida and 2) cineole via geranyl diphosphate with Rhodosporidium toruloides. We present multi-variable scan plots highlighting key drivers on costs and greenhouse gas emissions in order to identify the parameter space in which each pathway could ultimately achieve economic and environmental sustainability meeting or exceeding commodity product benchmarks, thus prioritizing future R&D focus areas.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Analysing lessons from experience as part of a project to prepare/train teams to manage potentially stressful crisis situations - 164

Following the presentation of the methodology for making use of Operating Experience (OE) data, implemented as part of a study on preparing teams to manage potentially stressful crisis situations, this paper discusses and enhances the 'Implementing a Learning Organisation (ILO)' model, the aim of which is to organise operating experience for learning purposes. By way of introduction, we first present this model, which is divided into four fields of investigation for organising an OE mechanism to support learning, to pose the question we aim to answer in this paper: how does the field relating to the use of OE in the ILO model help us to turn the experience acquired to good account? With this in mind, we then present the different stages of the methodology for making use of OE. The first stage involves defining the area under examination in line with current best practices. This definition is then used in the second stage, as a basis for developing a framework to guide the analysis of OE. Finally, the third stage of the methodology involves selecting the OE data to be analysed. The findings obtained in the chosen case are then presented and several points are discussed based on this experience. These relate to the following: the acquisition of knowledge on current working situations enabled by OE; the stored data analysis method; and the conditions facilitating the use of OE. (authors)

99 GENERAL AND MISCELLANEOUS↗