Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Capability Enhancements for System-level thermal Hydraulic Modeling of Lead Fast Reactors

This project has focused on the use, assessment, and development of the SAS4A/SASSYS-1 (SAS) safety analysis software. Although SAS was originally intended as a safety analysis tool for Liquid Metal cooled Fast Reactors (LMFRs), which includes both Sodium Fast Reactors (SFRs) and Lead Fast Reactors (LFRs), the vast majority of its recent development and customization has been tailored to SFRs. In general, enhancements that are made to the software for SFRs are applicable to LFRs, however, the fuel composition and corrosive nature of lead requires careful consideration when performing safety analysis of an LFR. In this project an emphasis was placed on closing gaps that are associated with modeling LFRs using SAS. The principal objective of the project was to enhance the ability of SAS as a licensing tool for LFRs. This objective was to be accomplished through three tasks: 1) Enhance the ability of SAS to couple with external software; 2) Improve the underlying physics models in SAS, with priority given to models that are highly relevant to LFRs; 3) Extend the Verification and Validation (V&V) basis of the software

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of a space activity suit

The development of a series of prototype space activity suit (SAS) assemblies is discussed. The SAS is a new type of pressure suit designed especially for extravehicular activity. It consists of a set of carefully tailored elastic fabric garments which have been engineered to supply sufficient counterpressure to the body to permit subjects to breath O2 at pressures up to 200 mm Hg without circulatory difficulty. A closed, positive pressure breathing system (PPBS) and a full bubble helmet were also developed to complete the system. The ultimate goal of the SAS is to improve the range of activity and decrease the energy cost of work associated with wearing conventional gas filled pressure suits. Results are presented from both laboratory (1 atmosphere) and altitude chamber tests with subjects wearing various SAS assemblies. In laboratory tests lasting up to three hours, the SAS was worn while subjects breathed O2 at pressures up to 170 mm Hg without developing physiological problems. The only physiological symptoms apparent were a moderate tachycardia related to breathing pressures above 130 mm Hg, and a small collection of edema fluid in the hands. Both problems were considered to be related to areas of under-pressurization by the garments. These problems, it is suggested, can ultimately be corrected by the development of new elastic fabrics and tailoring techniques. Energy cost of activity, and mobility and dexterity of subjects in the SAS, were found to be superior to those in comparable tests on subjects in full pressure suits.

Annis, J. F.↗

Small-angle X-ray and neutron scattering

Small-angle scattering (SAS) is a technique that is able to probe the structural organization of matter and quantify its response to changes in external conditions. X-ray and neutron scattering profiles measured from bulk materials or materials deposited at surfaces arise from nanostructural inhomogeneities of electron or nuclear density. Furthermore, the analysis of SAS data from coherent scattering events provides information about the length scale distributions of material components. Samples for SAS studies may be prepared in situ or under near-native conditions and the measurements performed at various temperatures, pressures, flows, shears or stresses, and in a time-resolved fashion. In this Primer, we provide an overview of SAS, summarizing the types of instrument used, approaches for data collection and calibration, available data analysis methods, structural information that can be obtained using the method, and data depositories, standards and formats. Recent applications of SAS in structural biology and the soft-matter and hard-matter sciences are also discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of two-dimensional magnetic uncertainties and three-dimensional error and perturbation fields on the Small Angle Slot divertor geometry and topology [Effects of two- and three-dimensional magnetic fields on the Small Angle Slot divertor magnetic topology]

The Small Angle Slot (SAS) was recently installed on DIII-D as an advanced divertor, promising easier plasma detachment and lower temperatures across the whole target. A twofold study of the SAS magnetic topology is presented in this paper. On one hand, a twodimensional uncertainty quantification analysis is carried out through a Monte Carlo approach in order to understand the level of accuracy of two-dimensional equilibrium computations in reconstructing the strike point and angle onto the divertor. Under typical experimental conditions, the uncertainties are found to be roughly 6.8 mm and 0.56 deg, respectively. On the other hand, a three-dimensional “vacuum” analysis is carried out to understand the effects of typical external perturbation fields on the scrape-off layer topology. When the threedimensional I-coils are switched on, poloidally-localized lobes are found to appear, grow, and hit the SAS target, although barely, even for 5 kA; at the same time, the strike point modulation is found to be roughly 1.8 mm and thus negligible for most purposes. Furthermore, such results complement previous two-dimensional analyses in characterizing typical SAS equilibria and provide useful background information for planning and interpreting SAS experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical assessment of the new V-shape small-angle slot divertor on DIII-D

The small-angle slot (SAS) divertor of the DIII-D tokamak, and its upcoming upgrade, the V-shape small-angle slot (SAS-V) divertor, are numerically investigated using the SOLPS-ITER code package, including the effect of particle drifts, for a range of plasma density, heating power, strike point position in the slot, and for both magnetic field directions. The simulations show that the electron temperature near the strike point is reduced in SAS-V compared to SAS, for both magnetic field directions, such that SAS-V achieves divertor detachment at a lower value of the outboard mid-plane separatrix electron density. The detachment threshold is lower because the V-shape focuses recycling neutrals on the V-end, densifying and cooling the plasma in the slot. At sufficiently high density, the V-shape also reduces the radial gradient of the temperature profile at the target, which in turns reduces the radial electric field and the E x B drift velocities, further densifying and cooling the plasma in the slot and leading to detachment. The V-shape effect, however, is reduced for higher heating power. With more heating power, the detachment density increases, reducing the ionization mean free path of recycled neutrals, which therefore become less sensitive to target shape changes. Furthermore, this suggests that in a fusion reactor, where the heating power is high, optimization of the divertor target shape needs to be combined with other strategies to lower the detachment density, such as in-slot injection of low-Z impurities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

2017 publication guidelines for structural modelling of small-angle scattering data from biomolecules in solution: an update

In 2012, preliminary guidelines were published addressing sample quality, data acquisition and reduction, presentation of scattering data and validation, and modelling for biomolecular small-angle scattering (SAS) experiments. Biomolecular SAS has since continued to grow and authors have increasingly adopted the preliminary guidelines. In parallel, integrative/hybrid determination of biomolecular structures is a rapidly growing field that is expanding the scope of structural biology. For SAS to contribute maximally to this field, it is essential to ensure open access to the information required for evaluation of the quality of SAS samples and data, as well as the validity of SAS-based structural models. To this end, the preliminary guidelines for data presentation in a publication are reviewed and updated, and the deposition of data and associated models in a public archive is recommended. These guidelines and recommendations have been prepared in consultation with the members of the International Union of Crystallography (IUCr) Small-Angle Scattering and Journals Commissions, the Worldwide Protein Data Bank (wwPDB) Small-Angle Scattering Validation Task Force and additional experts in the field.

Biochemistry & Molecular Biology↗

Materials Data on As24S25 by Materials Project

AsAs15S17(SAs)8 crystallizes in the triclinic P1 space group. The structure is one-dimensional and consists of one arsenic molecule; three SAs clusters; and one As15S17 ribbon oriented in the (1, 0, 0) direction. In one of the SAs clusters, there are two inequivalent As+2.08+ sites. In the first As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.30 Å. In the second As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.30 Å. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted L-shaped geometry to one As+2.08+ and one S2- atom. The S–S bond length is 2.09 Å. In the second S2- site, S2- is bonded in a distorted water-like geometry to one As+2.08+ and one S2- atom. In one of the SAs clusters, there are three inequivalent As+2.08+ sites. In the first As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.31 Å. In the second As+2.08+ site, As+2.08+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.12 Å) and one longer (2.37 Å) As–S bond lengths. In the third As+2.08+ site, As+2.08+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.26 Å) and one longer (2.32 Å) As–S bond lengths. There are three inequivalent S2- sites. In the first S2- site, S2- is bonded in a single-bond geometry to one As+2.08+ atom. In the second S2- site, S2- is bonded in a water-like geometry to two As+2.08+ atoms. In the third S2- site, S2- is bonded in an L-shaped geometry to two As+2.08+ atoms. In one of the SAs clusters, there are three inequivalent As+2.08+ sites. In the first As+2.08+ site, As+2.08+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.32 Å) and one longer (2.33 Å) As–S bond lengths. In the second As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.26 Å. In the third As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.35 Å. There are three inequivalent S2- sites. In the first S2- site, S2- is bonded in a water-like geometry to two As+2.08+ atoms. In the second S2- site, S2- is bonded in a 2-coordinate geometry to one As+2.08+ and one S2- atom. The S–S bond length is 2.09 Å. In the third S2- site, S2- is bonded in a distorted water-like geometry to one As+2.08+ and one S2- atom. In the As15S17 ribbon, there are fifteen inequivalent As+2.08+ sites. In the first As+2.08+ site, As+2.08+ is bonded in an L-shaped geometry to two S2- atoms. There are one shorter (2.25 Å) and one longer (2.43 Å) As–S bond lengths. In the second As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.25 Å. In the third As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.32 Å. In the fourth As+2.08+ site, As+2.08+ is bonded in a distorted trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.07–3.00 Å. In the fifth As+2.08+ site, As+2.08+ is bonded in an L-shaped geometry to two S2- atoms. There are one shorter (2.28 Å) and one longer (2.33 Å) As–S bond lengths. In the sixth As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.29 Å. In the seventh As+2.08+ site, As+2.08+ is bonded in an L-shaped geometry to two S2- atoms. There are one shorter (2.32 Å) and one longer (2.71 Å) As–S bond lengths. In the eighth As+2.08+ site, As+2.08+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.29 Å) and one longer (2.32 Å) As–S bond lengths. In the ninth As+2.08+ site, As+2.08+ is bonded in a distorted water-like geometry to two S2- atoms. There are one shorter (2.30 Å) and one longer (2.38 Å) As–S bond lengths. In the tenth As+2.08+ site, As+2.08+ is bonded in a 3-coordinate geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.23–2.81 Å. In the eleventh As+2.08+ site, As+2.08+ is bonded in a distorted L-shaped geometry to two S2- atoms. There are one shorter (2.39 Å) and one longer (2.45 Å) As–S bond lengths. In the twelfth As+2.08+ site, As+2.08+ is bonded in a distorted L-shaped geometry to two S2- atoms. There are one shorter (2.18 Å) and one longer (2.54 Å) As–S bond lengths. In the thirteenth As+2.08+ site, As+2.08+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.27 Å. In the fourteenth As+2.08+ site, As+2.08+ is bonded in an L-shaped geometry to two S2- atoms. There are one shorter (2.32 Å) and one longer (2.38 Å) As–S bond lengths. In the fifteenth As+2.08+ site, As+2.08+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.18 Å) and one longer (2.29 Å) As–S bond lengths. There are seventeen inequivalent S2- sites. In the first S2- site, S2- is bonded in a distorted water-like geometry to one As+2.08+ and one S2- atom. The S–S bond length is 2.03 Å. In the second S2- site, S2- is bonded in an L-shaped geometry to one As+2.08+ and one S2- atom. The S–S bond length is 2.03 Å. In the third S2- site, S2- is bonded in a bent 120 degrees geometry to two As+2.08+ atoms. In the fourth S2- site, S2- is bonded in a 1-coordinate geometry to one As+2.08+ and one S2- atom. The S–S bond length is 2.10 Å. In the fifth S2- site, S2- is bonded in a 2-coordinate geometry to two As+2.08+ atoms. In the sixth S2- site, S2- is bonded in a distorted L-shaped geometry to two As+2.08+ atoms. In the seventh S2- site, S2- is bonded in an L-shaped geometry to two As+2.08+ atoms. In the eighth S2- site, S2- is bonded in a 1-coordinate geometry to two As+2.08+ and one S2- atom. The S–S bond length is 2.07 Å. In the ninth S2- site, S2- is bonded in a distorted bent 120 degrees geometry to one As+2.08+ and one S2- atom. In the tenth S2- site, S2- is bonded in a single-bond geometry to one As+2.08+ atom. In the eleventh S2- site, S2- is bonded in a bent 120 degrees geometry to two As+2.08+ atoms. In the twelfth S2- site, S2- is bonded in a 2-coordinate geometry to two As+2.08+ atoms. In the thirteenth S2- site, S2- is bonded in a distorted trigonal non-coplanar geometry to three As+2.08+ atoms. In the fourteenth S2- site, S2- is bonded in a 2-coordinate geometry to two As+2.08+ atoms. In the fifteenth S2- site, S2- is bonded in a distorted water-like geometry to one As+2.08+ and one S2- atom. In the sixteenth S2- site, S2- is bonded in a 3-coordinate geometry to two As+2.08+ and one S2- atom. In the seventeenth S2- site, S2- is bonded in a distorted bent 120 degrees geometry to one As+2.08+ and one S2- atom.

36 MATERIALS SCIENCE↗

SmartApps: Middle-ware for Adaptive Applications on Reconfigurable Platforms

There are several reasons why the performance of current distributed and heterogeneous systems is often disappointing. For example, the characteristics of the application may be input sensitive and evolve during execution causing dramatic changes in memory reference patterns, resource requirements, or degree of concurrency between different phases of the computation. Or, the system may change dynamically with nodes failing or appearing, some network links severed and other links established with different latencies and bandwidths. Another important reason for poor performance is the fairly compartmentalized approach to optimization: applications, compilers, operating systems and hardware configurations are designed and optimized in isolation and without the knowledge of instance specific information and needs of a running application. There is too little information flow across these boundaries and no global optimization is even attempted. For example, most operating systems services like paging, virtual-to-physical page mapping, I/O, or data layout in disks, provide little or no application customization. Similarly, the off-the-shelf hardware used by most commercial systems is optimized to give best average-case performance. To address this problem, we have proposed application-centric computing, or Smart Applications (SAS). In the SAS executable, the compiler embeds most run-time system services, and a performance-optimizing feedback loop that monitors the application's performance and adaptively reconfigures the application and the OS/system platform. At run-time, after incorporating the code's input and determining the system's resources and state, the SAS performs an *instance* specific optimization, which is more tractable than a global generic optimization between application, OS and system. The overriding philosophy of SAS is ``measure, compare, and adapt if beneficial.'' That is, the application will continually monitor its performance and the available resources to determine if, and by how much, performance could be improved if the application was restructured. Then, if the potential performance benefit outweighs the projected overhead costs, the application will restructure itself and the underlying system accordingly. The SAS framework includes performance monitoring and modeling components and mechanisms for performing the actual restructuring at various levels including: (i) algorithmic adaptation, (ii) run-time software optimization (e.g., input sensitivity analysis, etc.), (iii) tuning reconfigurable OS services (scheduling policy, page size, etc), and (iv) system configuration (e.g., selecting which, and how many, computational resources to use). SmartApps is being developed in the STAPL infrastructure. STAPL (the Standard Template Adaptive Parallel Library) is a framework for developing highly-optimizable, adaptable, and portable parallel and distributed applications. It consists of a relatively new and still evolving collection of generic parallel algorithms and distributed containers and a run-time system (RTS) through which the application and compiler interact with the OS and hardware.

97 MATHEMATICS AND COMPUTING↗

Ground and flight test methods for determining limit cycle and structural resonance characteristics of aircraft stability augmentation systems

Performance criteria and test techniques are applied to stability augmentation systems (SAS) during ground testing to predict objectionable limit cycles and preclude structural resonance during flight. Factors that give rise to these problems, means of suppressing their effects, trade-offs to be considered, and ground test methods that have been developed are discussed. SAS performance predicted on the basis of these tests is compared with flight data obtained from three lifting body vehicles and the X-15 research airplane. Limit cycle and structural resonance test criteria, based upon ground and flight experience and data, were successfully applied to these vehicles. The criteria used were: The limit cycle amplitude (SAS gain multiplied by peak-to-peak angular rate) shall not exceed 0.5 deg for the highest product of control power and SAS gain that will be used in flight; the maximum in-flight SAS gain should never exceed 50 percent of the value at which a structural resonance can be sustained during ground test.

Painter, W. D.↗

The effects of stability augmentation on the gust response of a STOL aircraft during a curved manual approach

The task of investigating the effect of SAS was formulated as two optimal control problems for stochastic systems: (1) to compute SAS gains with a rate model in the performance index algorithm; and (2) to calculate the pilot gains and system gust response using an optimal pilot model. Both problems were solved to yield reasonable low gains for the pilot and SAS, and the lateral directional mode poles and the longitudinal short period poles could be placed accurately by the model matching algorithm. Of the longitudinal (SAS) poles achieved, the vertical rms path error was least for the unaugmented poles. The lateral rms path error was an order of magnitude larger than the vertical error and showed a plus or minus 50 percent variation with SAS. It increased with dutch roll frequency and damping, and it decreased most significantly with increased roll stability. The variation in lateral error with bank angle for curved flight was also a significant function of the augmented poles.

Porter, M. B., Jr.↗

Structural Alignment Sensor Feasibility Demonstration

A structural alignment sensor (SAS) was developed for use with large deployable antenna systems for contour measurement and/or active control. The SAS is a laser ranging system using frequency modulation and accurate phase measurement to determine distance. Work was done with a CO2 and HeNe laser. The capability of the SAS to measure antenna rib contours was studied over ranges of 50 meters to a resolution of 100 microns. Initial resolution data was taken with the CO2 system. This data shows that it will indeed meet the SAS requirements. The development of the HeNe system was initiated because it offers substantial improvement in size, weight, and power over the CO2 system. The final demonstration was made with the HeNe system and it too showed that the SAS requirements could be met with this alternate approach. The projection of these results to a conceptual design for a flight system and its application are described.

Anderson, R. H.↗

Soot Superaggregates from Flaming Wildfires and Their Direct Radiative Forcing

Wildfires contribute significantly to global soot emissions, yet their aerosol formation mechanisms and resulting particle properties are poorly understood and parameterized in climate models. The conventional view holds that soot is formed via the cluster-dilute aggregation mechanism in wildfires and emitted as aggregates with fractal dimension D(sub f) approximately equals 1.8 mobility diameter D(sub m) (is) less than or equal to 1 micron, and aerodynamic diameter D(sub a) (is) less than or equal to 300 nm. Here we report the ubiquitous presence of soot superaggregates (SAs) in the outflow from a major wildfire in India. SAs are porous, low-density aggregates of cluster-dilute aggregates with characteristic D(sub f) approximately equals 2.6,D(sub m) (is) greater than 1 micron, and D(sub a) is less than or equal to 300 nm that form via the cluster-dense aggregation mechanism.We present additional observations of soot SAs in wildfire smoke-laden air masses over Northern California, New Mexico, and Mexico City. We estimate that SAs contribute, per unit optical depth, up to 35% less atmospheric warming than freshly-emitted (D(sub f) approximately equals 1.8) aggregates, and approximately equals 90% more warming than the volume-equivalent spherical soot particles simulated in climate models.

SAS↗

Empirical Relationships Between Optical Properties and Equivalent Diameters of Fractal Soot Aggregates at 550 Nm Wavelength.

Soot aggregates (SAs)-fractal clusters of small, spherical carbonaceous monomers-modulate the incoming visible solar radiation and contribute significantly to climate forcing. Experimentalists and climate modelers typically assume a spherical morphology for SAs when computing their optical properties, causing significant errors. Here, we calculate the optical properties of freshly-generated (fractal dimension Df = 1.8) and aged (Df = 2.6) SAs at 550 nm wavelength using the numericallyexact superposition T-Matrix method. These properties were expressed as functions of equivalent aerosol diameters as measured by contemporary aerosol instruments. This work improves upon previous efforts wherein SA optical properties were computed as a function of monomer number, rendering them unusable in practical applications. Future research will address the sensitivity of variation in refractive index, fractal prefactor, and monomer overlap of SAs on the reported empirical relationships.

deuterium fluorides↗

Glassy carbon as an absolute intensity calibration standard for small-angle scattering.

Absolute calibration of small-angle scattering (SAS) intensity data (measured in terms of the differential scattering cross section per unit sample volume per unit solid angle) is essential for many important aspects of quantitative SAS analysis, such as obtaining the number density, volume fraction, and specific surface area of the scatterers. It also enables scattering data from different instruments (light, X-ray, or neutron scattering) to be combined, and it can even be useful to detect the existence of artifacts in the experimental data. Different primary or secondary calibration methods are available. In the latter case, absolute intensity calibration requires a stable artifact with the necessary scattering profile. Glassy carbon has sometimes been selected as this intensity calibration standard. Here we review the spatial homogeneity and temporal stability of one type of commercially available glassy carbon that is being used as an intensity calibration standard at a number of SAS facilities. We demonstrate that glassy carbon is sufficiently homogeneous and stable during routine use to be relied upon as a suitable standard for absolute intensity calibration of SAS data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of excess free energy at an interface according to the applied interpolation scheme for elasticity: A phase-field method

Phase-field modeling is an effective simulation technique for modeling microstructure evolution of elastically anisotropic systems. To introduce the elastic energy contribution in a phase field model, an interpolation scheme is used to define the mechanical properties within the phases and across the continuous interface. Several existing interpolation schemes introduce a potential excess elastic energy at the interface, which undesirable effect on microstructure evolution needs to be evaluated. In this study, we focused on three interpolation schemes including Khachaturyan’ scheme (KHS), Voigt–Taylor’s scheme (VTS), and Steinbach–Apel’s scheme (SAS). Comparisons of these schemes’ performances were performed in three configuration types using the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework: bi-crystal, isotropic particle-matrix and anisotropic particle-matrix. The contribution of excess elastic energy on the interface energy as a function of interface width and the computational time to steady-state were evaluated in these three configurations. SAS introduces the lowest excess elastic energy contribution and the VTS has the biggest contribution amongst the considered schemes. Moreover, when modeling precipitation in an anisotropic elastic material, the SAS approach seems to predict more physical convex shapes during growth, making it preferable to KHS and VTS. Finally, as currently implemented, SAS requires the largest computational time and KHS requires the smallest time to reach steady-state amongst the considered schemes.

36 MATERIALS SCIENCE↗

Use of sustainability appraisal by English planning inspectors and judges

This article considers how sustainability appraisals (SA - an English form of SEA that also considers social and economic issues) are treated at the end of the plan-making process: by planning inspectors who review plans before they are adopted, and by judges in the case of legal challenge to plans and their SAs. It briefly describes the role of inspectors and judges, and how their decisions influence SA. It presents the conclusions of 81 planning inspectors' reports about local authority development plans and their SAs, including three cases where inspectors required further SA information and reasons given by inspectors for not challenging the legal adequacy of other SAs. The three main successful English legal challenges to SA are then summarised. Planning inspectors seemed prone, until recently, to not challenge even quite poor quality SAs. This seems to be changing in the wake of recent court judgements, and in turn is affecting planners' SA practice. However it is unclear whether these changes will affect only the procedural aspects of SA or also planners' and inspectors' 'hearts and minds'. - Highlights: Black-Right-Pointing-Pointer Inspectors tend to err in favour of the submitted plan, even where its sustainability or the quality of its SA is dubious. Black-Right-Pointing-Pointer In contrast to inspectors, judges seem to be taking a broad and rigorous view of SEA requirements. Black-Right-Pointing-Pointer Planners and inspectors are changing their behaviour to avoid legal challenge.

54 ENVIRONMENTAL SCIENCES↗

Dense Ru single-atoms integrated with sulfoacids for cellulose valorization to isosorbide

Metal-acid bifunctional catalysts are the unity of two opposites (metal-acid repelling) for cellulosic biomass valorization to isosorbide. It is challenging to improve the selectivity of metal hydrogenation catalysts and their synergism with acids for catalytic hydrolysis and dehydration to achieve substantial isosorbide. Herein, dense Ru single-atoms (10.1 wt% of Ru SAs) are anchored on sulfoacid-functionalized hollow mesoporous carbon shells, designed by assembling silica and 8-hydroxyquinoline-modified chitosan (HQ-CTS) through in situ Stöber templating strategy before pyrolysis and acid treatment. Based on X-ray absorption fine structure and computational modeling results, the structure of Ru SAs is determined as RuN 4 , which is more selective for a transitional glucose hydrogenation to sorbitol than Ru001 of Ru clusters. A lower-energy barrier of 1.21 (0.72) eV is delivered over RuN 4 (Ru001) for glucose hydrogenation (isomerization). These Ru SAs are integrated with sulfoacids (SO 3 H) but resistent against acids, rendering enhanced isosorbide yield in water as compared to Ru clusters, via a one-pot cascade reaction under harsh conditions (220 °C, 6 MPa H 2 ). The elaborately fabricated dense Ru SAs and sulfoacids, achieved by varying the addition time of HQ-CTS during the in situ Stöber templating process, improve the synergism of glucose hydrogenation with cellulose hydrolysis and sorbitol dehydration. In conclusion, this study provides a new idea for rational design of high-performance metal-acid bifunctional catalysts toward one-pot conversion of cellulose to isosorbide.

36 MATERIALS SCIENCE↗

Effect of H 2 O Vapor on the Adsorption and Desorption Behavior of CO 2 in a Solid Amine Sorbent

The effect of H 2 O vapor on the adsorption and desorption of CO 2 and vice versa, both on a commercially viable solid amine sorbent (SAS), were studied using a thermogravimetric analyzer at constant temperature. The SAS was prepared by physically immobilizing PEI (M n 423) in a porous silica (CARiACT G10). Studies were carried out at two concentrations of CO 2 (2 vol % in N 2 and 100 vol %), one concentration of H 2 O vapor (2 vol %), and four temperatures (40, 60, 80, and 100 °C). The results revealed three separate and identifiable mechanisms or processes taking place on the SAS, i.e., the individual adsorption of CO 2 or H 2 O and the coadsorption of H 2 O and CO 2 . The individual adsorption of either CO 2 or H 2 O was noncompetitive or completely independent of each other thermodynamically for both concentrations of CO2 and all four temperatures. In addition, the individual adsorption of CO 2 was fully reversible, while the individual adsorption of H 2 O was only partially reversible. The coadsorption of CO 2 and H 2 O was exothermic, with either irreversible or very slow desorption kinetics. Coadsorption was observed appreciably only at 60 and 40 °C at both CO 2 concentrations and only very slightly at 80 °C and 2 vol % CO 2 . It was not observed at 100 °C at either CO 2 concentration or at 80 °C at 100 vol % CO 2 . The influence of CO 2 or H 2 O on the kinetics of any of these processes was revealed only at the two lower temperatures, with H 2 O having a positive influence on the desorption kinetics of CO 2 at 40 °C and with CO 2 , if adsorbed previously, having a negative influence on the adsorption kinetics of both H 2 O and the coadsorption of both CO 2 and H 2 O at both 60 and 40 °C. When these effects existed, they were not that significant, at least not at 2 vol % H 2 O vapor. Finally, these results thus indicated that the effect of H 2 O vapor in the feed of a CO 2 stream does not have to be accounted for mechanistically when modeling a cycle adsorption process based on this commercially viable SAS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗