Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “robotic manipulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The application of model-referenced adaptive control to robotic manipulators

The achievement of quality dynamic performance in manipulator systems is difficult using conventional control methods because of both the inherent geometric nonlinearities of these systems and the dependence of the system dynamics on the characteristics of manipulated objects. A model-referenced adaptive control law is developed for maintaining uniformly good performance over a wide range of motions and payloads. The effectiveness of the approach is demonstrated in several simulations and the system stability as a function of input is investigated. Also developed is a 'learning signal' approach designed to minimize initial transients arising from abrupt changes in the inertial payload.

Dubowsky, S.↗
NASA NTRS1985

Direct model reference adaptive control of a flexible robotic manipulator

Quick, precise control of a flexible manipulator in a space environment is essential for future Space Station repair and satellite servicing. Numerous control algorithms have proven successful in controlling rigid manipulators wih colocated sensors and actuators; however, few have been tested on a flexible manipulator with noncolocated sensors and actuators. In this thesis, a model reference adaptive control (MRAC) scheme based on command generator tracker theory is designed for a flexible manipulator. Quicker, more precise tracking results are expected over nonadaptive control laws for this MRAC approach. Equations of motion in modal coordinates are derived for a single-link, flexible manipulator with an actuator at the pinned-end and a sensor at the free end. An MRAC is designed with the objective of controlling the torquing actuator so that the tip position follows a trajectory that is prescribed by the reference model. An appealing feature of this direct MRAC law is that it allows the reference model to have fewer states than the plant itself. Direct adaptive control also adjusts the controller parameters directly with knowledge of only the plant output and input signals.

Meldrum, D. R.↗
NASA NTRS1985

Time optimal robotic manipulator motions and work places for point to point tasks

High productivity requires that manipulators perform complex tasks quickly. Recently, optimal control algorithms have been developed which enable manipulators to move quickly, but only for simple motions. A method is presented here which combines simple time optimal motions in an optimal manner to yield the minimum time motions for an important class of complex manipulator tasks composed of point to point moves, such as assembly, electronic component insertion and spot welding. This method can also be used to design manipulator actions and work places so that tasks can be completd in minimum time. The method has been implemented in a CAD software package. Examples are presented which show the methods effectiveness.

Dubowsky, S.↗
NASA NTRS1987

Solid modelling for the manipulative robot arm (power) and adaptive vision control for space station missions

The structure of a flexible arm derived from concatenation of the Stewart-Table-based links were studied. Solid modeling provides not only a realistic simulation, but is also essential for studying vision algorithms. These algorithms could be used for the adaptive control of the arm, using the well-known algorithms such as shape from shading, edge detection, orientation, etc. Details of solid modeling and its relation to vision based adaptive control are discussed.

Harrand, V.↗
NASA NTRS1987

Adaptive control of robotic manipulators

The author presents a novel approach to adaptive control of manipulators to achieve trajectory tracking by the joint angles. The central concept in this approach is the utilization of the manipulator inverse as a feedforward controller. The desired trajectory is applied as an input to the feedforward controller which behaves as the inverse of the manipulator at any operating point; the controller output is used as the driving torque for the manipulator. The controller gains are then updated by an adaptation algorithm derived from MRAC (model reference adaptive control) theory to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal are also used to enhance closed-loop stability and to achieve faster adaptation. The proposed control scheme is computationally fast and does not require a priori knowledge of the complex dynamic model or the parameter values of the manipulator or the payload.

Seraji, H.↗
NASA NTRS1989

Inversion Of Jacobian Matrix For Robot Manipulators

Report discusses inversion of Jacobian matrix for class of six-degree-of-freedom arms with spherical wrist, i.e., with last three joints intersecting. Shows by taking advantage of simple geometry of such arms, closed-form solution of Q=J-1X, which represents linear transformation from task space to joint space, obtained efficiently. Presents solutions for PUMA arm, JPL/Stanford arm, and six-revolute-joint coplanar arm along with all singular points. Main contribution of paper shows simple geometry of this type of arms exploited in performing inverse transformation without any need to compute Jacobian or its inverse explicitly. Implication of this computational efficiency advanced task-space control schemes for spherical-wrist arms implemented more efficiently.

Fijany, Amir↗
NASA NTRS1987

Chaos motion in robot manipulators

It is shown that a simple two-link planar manipulator exhibits a phenomenon of global instability in a subspace of its configuration space. A numerical example, as well as results of a graphic simulation, is given.

Lokshin, A.↗
NASA NTRS1987

Adaptive hybrid position/force control of robotic manipulators

The problem of position and force control for the compliant motion of the manipulators is considered. The external force and the position of the end-effector are related by a second order impedance function. The force control problem is then translated into a position control problem. For that, an adaptive controller is designed to achieve the compliant motion. The design uses the Liapunov's direct method to derive the adaptation law. The stability of the process is guaranteed from the Liapunov's stability theory. The controller does not require the knowledge of the system parameters for the implementation, and hence is easy for applications.

Pourboghrat, F.↗
NASA NTRS1988

Efficient Jacobian inversion for the control of simple robot manipulators

Symbolic inversion of the Jacobian matrix for spherical wrist arms is investigated. It is shown that, taking advantage of the simple geometry of these arms, the closed-form solution of the system Q = J-1X, representing a transformation from task space to joint space, can be obtained very efficiently. The solutions for PUMA, Stanford, and a six-revolute-joint coplanar arm, along with all singular points, are presented. The solution for each joint variable is found as an explicit function of the singular points which provides a better insight into the effect of different singular points on the motion and force exertion of each individual joint. For the above arms, the computation cost of the solution is on the same order as the cost of forward kinematic solution and it is significantly reduced if forward kinematic solution is already obtained. A comparison with previous methods shows that this method is the most efficient to date.

Fijany, Amir↗
NASA NTRS1989

Distribution of dynamic loads for multiple cooperating robot manipulators

For the situation of multiple cooperating manipulators handling a single object, a formulation is presented which allows load distribution of the combined system to be made while taking manipulator dynamics into account. First, object dynamics are used to transform the motion task. An integrated procedure for modeling arm dynamics are used to transform the motion task. An integrated procedure for modeling arm dynamics is detailed. Then, a method is introduced which transforms the object load to the joint level. At this level, various methods of load distribution that allow subtask performance are proposed. These methods allow desired object motion while selecting loads desirable to alleviate manipulator dynamic loads.

Walker, Ian D.↗
NASA NTRS1988

Stability analysis of multiple rigid robot manipulators holding a common rigid object

The authors consider several possible control structures for multiple-arm systems by regarding either joint torques, tip force, or a generalized acceleration of the control input. They emphasize the first case, since a class of relatively model-independent control laws can be generated for both motion and internal force control. The recently developed move/squeeze orthogonal subspace decomposition coupled with the energy Lyapunov function formulation provides a basic analytical framework within which motion and force control are considered as independent problems. Simulation results of two three-link planar arms are included to demonstrate good transient performance for both motion and force that can be attained with the full dynamics control paradigm.

Wen, John T.↗
NASA NTRS1989

Planning time-optimal robotic manipulator motions and work places for point-to-point tasks

A method is presented which combines simple time-optimal motions in an optimal manner to yield the minimum-time motions for an important class of complex manipulator tasks composed of point-to-point moves such as assembly, electronic component insertion, and spot welding. This method can also be used to design manipulator actions and work places so that tasks can be completed in minimum time. The method has been implemented in a computer-aided design software system. Several examples are presented. Experimental results show the method's validity and utility.

Dubowsky, S.↗
NASA NTRS1989

Robust high-performance control for robotic manipulators

A robust control scheme to accomplish accurate trajectory tracking for an integrated system of manipulator-plus-actuators is proposed. The control scheme comprises a feedforward and a feedback controller. The feedforward controller contains any known part of the manipulator dynamics that can be used for online control. The feedback controller consists of adaptive position and velocity feedback gains and an auxiliary signal which is simply generated by a fixed-gain proportional/integral/derivative controller. The feedback controller is updated by very simple adaptation laws which contain both proportional and integral adaptation terms. By introduction of a simple sigma modification to the adaptation laws, robustness is guaranteed in the presence of unmodeled dynamics and disturbances.

Seraji, H.↗
NASA NTRS1989

Kinematic sensitivity of robot manipulators

Kinematic sensitivity vectors and matrices for open-loop, n degrees-of-freedom manipulators are derived. First-order sensitivity vectors are defined as partial derivatives of the manipulator's position and orientation with respect to its geometrical parameters. The four-parameter kinematic model is considered, as well as the five-parameter model in case of nominally parallel joint axes. Sensitivity vectors are expressed in terms of coordinate axes of manipulator frames. Second-order sensitivity vectors, the partial derivatives of first-order sensitivity vectors, are also considered. It is shown that second-order sensitivity vectors can be expressed as vector products of the first-order sensitivity vectors.

Vuskovic, Marko I.↗
NASA NTRS1990

Simulation of cooperating robot manipulators on a mobile platform

The dynamic equations of motion for two manipulators holding a common object on a freely moving mobile platform are developed. The full dynamic interactions from arms to platform and arm-tip to arm-tip are included in the formulation. The development of the closed chain dynamics allows for the use of any solution for the open topological tree of base and manipulator links. In particular, because the system has 18 degrees of freedom, recursive solutions for the dynamic simulation become more promising for efficient calculations of the motion. Simulation of the system is accomplished through a MATLAB program, and the response is visualized graphically using the SILMA Cimstation.

Murphy, Steve H.↗
NASA NTRS1992

Bilevel Shared Control Of A Remote Robotic Manipulator

Proposed concept blends autonomous and teleoperator control modes, each overcoming deficiencies of the other. Both task-level and execution-level functions performed at local and remote sites. Applicable to systems with long communication delay between local and remote sites or systems intended to function partly autonomously.

Hayati, Samad A.↗
NASA NTRS1993

Extended-Task-Space Control For Robotic Manipulators

Extended-task-space concept provides unified approach for control of both redundant and nonredundant manipulators: theoretical framework for complete description of set of mechanism commands in terms of task-space commands, and singularity-avoidance scheme providing robustness at and near singular points of workspace while not degrading performance in nonsingular regions.

Backes, Paul G.↗
NASA NTRS1992

Inertial-space disturbance rejection for robotic manipulators

The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted on a 3-DOF platform is investigated. A control algorithm is designed to track the desired position and attitude of the end-effector in inertial space, subject to unknown disturbances in the platform axes. Conditions for the stability of the closed-loop system are derived. The performance of the controller is compared for step, sinusoidal, and random disturbances in the platform rotational axis and in the neighborhood of kinematic singularities.

Holt, Kevin↗