Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Studies of auroral X-ray imaging from high altitude spacecraft

Results of a study of techniques for imaging the aurora from a high altitude satellite at X-ray wavelengths are summarized. The X-ray observations allow the straightforward derivation of the primary auroral X-ray spectrum and can be made at all local times, day and night. Five candidate imaging systems are identified: X-ray telescope, multiple pinhole camera, coded aperture, rastered collimator, and imaging collimator. Examples of each are specified, subject to common weight and size limits which allow them to be intercompared. The imaging ability of each system is tested using a wide variety of sample spectra which are based on previous satellite observations. The study shows that the pinhole camera and coded aperture are both good auroral imaging systems. The two collimated detectors are significantly less sensitive. The X-ray telescope provides better image quality than the other systems in almost all cases, but a limitation to energies below about 4 keV prevents this system from providing the spectra data essential to deriving electron spectra, energy input to the atmosphere, and atmospheric densities and conductivities. The orbit selection requires a tradeoff between spatial resolution and duty cycle.

Mckenzie, D. L.↗

System and method for character recognition

A character recognition system is disclosed in which each character in a retina, defining a scanning raster, is scanned with random lines uniformly distributed over the retina. For each type of character to be recognized the system stores a probability density function (PDF) of the random line intersection lengths and/or a PDF of the random line number of intersections. As an unknown character is scanned, the random line intersection lengths and/or the random line number of intersections are accumulated and based on a comparison with the prestored PDFs a classification of the unknown character is performed.

Hong, J. P.↗

Characterization of point focusing test bed concentrators at JPL

The characterization data were measured using both a flux mapper and a cold water calorimeter. The flux mapper uses a Kendall Radiometer as the sensing device. It is mounted on an x, y, z motor-driven positioning mechanism that allows the sensor to take an x-y flux raster at several Z planes in the vicinity of the concentrators nominal focal plane. Various concepts were tried to protect the concentrator structure from being damaged by the Sun's energy during sun acquisition and deacquisition. A description of both the passive and active protective systems is presented.

Starkey, D. J.↗

Graphical measurement of Saturn's oblateness and the radius of the Encke gap

The geometric distortions attendant to spin-scan imaging were extraordinarily manifest in the Pioneer encounter with Saturn. By overlapping graphical predictions of these distortions with raster scans of the raw intensity data, both displayed to the same scale on a Versatec printer-plotter, it is possible to determine the precise geometry of a data-taking sequence. The predictions are quite sensitive to the assumed dimensions of Saturn and its rings. It is accordingly concluded that the ratio of polar to equatorial radius is 0.91 and that the Encke gap is 133,500 km from Saturn's center.

Burke, J. J.↗

The remote-controlled spectrograph, area scanner, and spectropolarimeter for the Lick 3-m telescope

A Cassegrain spectrograph used in conjunction with an image-tube, image-dissector scanner (ITS) is discussed with reference to its design features and operation. The spectrograph has a remote control feature, and its parameters, such as slit width, decker position, filter selection, focus, and grating selection, can be easily changed by computer command or a hard-wired control box. The discussion also includes the area scanner modification which allows raster scanning and limited picture taking. Finally, the design of a two-channel polarization analyzer is presented which allows simultaneous sky and sky-plus-star observations and faint-object polarimetry.

Miller, J. S.↗

Control of the Soft X-ray Polychromator on the Solar Maximum Mission Satellite

The Soft X-ray Polychromator on the Solar Maximum Mission Satellite consists of two largely independent instruments: the Flat Crystal Spectrometer, a highly collimated scanning spectrometer mounted on a raster platform, and the Bent Crystal Spectrometer, a broadly collimated spectrometer providing high time-resolution (128 ms) spectra for the study of rapidly evolving phenomena. Each instrument is controlled by a microcomputer system built around an RCA 1802 microprocessor. This paper presents a discussion of the motivation for using a microprocessor in this application, and the design concepts that were implemented. The effectiveness of the approach as seen after several months of operation will also be discussed.

Springer, L. A.↗

Performance and design of the ultraviolet spectrometer and polarimeter on the solar maximum mission

The instrument observes spectral line intensity, Doppler motions, and polarization parameters. First Dopplergrams of the sun showing mass motion of prominences have been obtained. The instrument consists of a telescope, a spectrometer, a polarimeter, and five detectors. Spectral range extends from 1150 to 3600 Angstroms. The telescope is an alphanatic Gregorian capable of scanning a 256 x 256 arcsecond raster. The spectrometer is an Ebert-Fastie mount with exchangeable slits for intensity measurements and spectroscopy. Detectors are photomultipliers operating in the pulse-counting mode.

Sterk, A. A.↗

The C I opacity and physical structure of cool, very dense plasma in the solar corona

The physical structure of the cool material in the volume of the solar corona is investigated. The observational evidence is summarized in a table giving the brightness contrast in optical and EUV radiations. The state of ionization and the opacity sources are discussed, and a physical model is described that is consistent with the EUV and optical data. It is noted that a comparison of the EUV raster pictures with H-alpha and Ca K photoheliograms indicates that the material is commonly injected from below into relatively low-lying magnetic loops (fibrils) seen near sunspots and plages.

Foukal, P.↗

Observations of the giant radio lobes region of Centaurus A with SAS 3

Observations of the X-ray flux from the extended radio lobes of the galaxy Centaurus A obtained with the SAS 3 observatory are reported. The 15 x 15 deg region that includes the lobes was mapped by superposing data from raster scans with the horizontal tubular collimator detectors, which have a 1.7 deg FWHM circular field of view. Data obtained is consistent with the presence of superposed emission from the point sources NGC 5128 and MX 1312-42, a previously unreported source detected by the Einstein Observatory IPC. Fluxes of 4.63 + or - 0.14 x 10 to the -10th and 4.6 + or - 0.6 x 10 to the -11th ergs/sq cm per sec were measured for NGC 5128 and MX 1312-42, respectively, with best fit power law spectra of indices 0.83 + or - 0.04 and 0.62 + or - 0.10 and hydrogen column densities of 1.23 + or - 0.10 x 10 to the 23rd and 9.7 + or - 15.0 x 10 to the 21st atoms/sq cm. Results imply an upper limit of 2.9 x 10 to the 11th for the X-ray emission from the extended radio lobes of Cen A between 2 and 10 keV, which indicates a lower limit to the magnetic field in the lobes of 1.6 x 10 to the -6th gauss.

Marshall, F. J.↗

Solar Maximum Mission Experiment - Ultraviolet Spectroscopy and Polarimetry on the Solar Maximum Mission

The Ultraviolet Spectrometer and Polarimeter on the Solar Maximum Mission spacecraft is described. It is pointed out that the instrument, which operates in the wavelength range 1150-3600 A, has a spatial resolution of 2-3 arcsec and a spectral resolution of 0.02 A FWHM in second order. A Gregorian telescope, with a focal length of 1.8 m, feeds a 1 m Ebert-Fastie spectrometer. A polarimeter comprising rotating Mg F2 waveplates can be inserted behind the spectrometer entrance slit; it permits all four Stokes parameters to be determined. Among the observing modes are rasters, spectral scans, velocity measurements, and polarimetry. Examples of initial observations made since launch are presented.

Tandberg-Hanssen, E.↗

Parallelism maps for optically contacted etalons

A measurement technique is described that is capable of producing accurate numerical maps of the parallelism defect of optically contacted Fabry-Perot etalons. A photoelectric raster scan of the etalon transmission intensity distribution is performed at each of three closely spaced etalon tunings, one at maximum on-axis and two at the half-maxima on-axis positions. Simple data manipulation gives numerical or contour maps of the parallelism defect. Results demonstrating the effect of mechanical constraints on etalon parallelism are presented

Killeen, T. L.↗

Interactive Digital Image Manipulation System (IDIMS)

The implementation of an interactive digital image manipulation system (IDIMS) is described. The system is run on an HP-3000 Series 3 minicomputer. The IDIMS system provides a complete image geoprocessing capability for raster formatted data in a self-contained system. It is easily installed, documentation is provided, and vendor support is available.

Fleming, M. D.↗

Computational aspects of remapping digital imagery

One of the advantages of automated cartography is that map data stored in the digital computer can be plotted or displayed at any scale or projection by recomputing the coordinates of the data. This is especially easy in the case of vector (graphics) data but in the case of digital image (raster) data, remapping is a more difficult operation. Examples of the remapping of digital imagery would include rectification of a LANDSAT MSS to an orthographic or Mercator projection, warping of one image to register with another, or rotation, scale, or aspect changes of a digital image. Use of general purpose computers and array processors for this task will be covered. Data processing error will be discussed for each modelling/warping approach.

Zobrist, A. L.↗

Attitude tracker

Line array sensors produce data which has no inherent geometrical continuity. Hence, any platform attitude variation will be evidenced as a distortion when the data lines are displayed in the normal Cartesian raster. Ancillary sensing is required to establish the platform attitude to allow geometric rectification. This is normally provided by inertial or star reference attitude sensors. However, in the absence of such sensors or if performance of them is degraded, the required attitude information is lost. A strawman sensor design is proposed which utilizes small image areas on the ground to provide a series of motion vectors with which the platform attitude can be tracked; this allows the distorted image received by the normal image line sensor to be rectified.

Billingsley, F. C.↗

An advanced programmable/reconfigurable color graphics display system for crew station technology research

The hardware configuration, software organization, and applications software for the NASA IKONAS color graphics display system are described. The systems were created at the Langley Research Center Display Device Laboratory to develop, evaluate, and demonstrate advanced generic concepts, technology, and systems integration techniques for electronic crew station systems of future civil aircraft. A minicomputer with 64K core memory acts as a host for a raster scan graphics display generator. The architectures of the hardware system and the graphics display system are provided. The applications software features a FORTRAN-based model of an aircraft, a display system, and the utility program for real-time communications. The model accepts inputs from a two-dimensional joystick and outputs a set of aircraft states. Ongoing and planned work for image segmentation/generation, specialized graphics procedures, and higher level language user interface are discussed.

Montoya, R. J.↗

Detection of a temperature deficit in magnetic faculae at the solar photosphere

A photometric technique is presented which allows the observation of faculae across the entire solar disk. A clean continuum was used and granular noise was reduced by subtracting simultaneous spectroheliograms taken at widely separated points of the photospheric radiation curve. Spectroheliographic observations taken from March 12-14, 1980, using two color-scans in the green at gamma 4980.96 and gamma 5256.31 in the fourth order resulted in observation of clean continua in the red at gamma 6641.85 and gamma 7008.8 in another slot of the magnetograph. Approximately 20 raster scans were obtained and indications were found that dark magnetic facular structures in the Delta signal were cooler than the photosphere at equal optical continuum depths

Foukal, P.↗

The thermal structure of solar coronal loops and implications for physical models of coronae

EUV spectra of three active region loops observed above the solar limb with the SO55 spectrometer on Skylab are analyzed. It is noted that the lengths, peak temperatures, and pressures of the loops are typical of the X-ray coronal loops to which static models have been applied. It is found that the physical parameters of the coronal loop plasma derived from EUV spectra and raster pictures are not well represented by the static models. Although the loops also contain a significant quantity of cool plasma, no physical reason is found to differentiate them from other active region loops of similar length, pressure, and temperature. Several line ratios in the loop spectrum suggest departures from ionization equilibrium caused by rapid cooling. The source of this cooling material is discussed with reference to several models of loop dynamics.

Raymond, J. C.↗