Results for “radiation mapping” — Page 8

DOE OSTI2025

Characterization of in-situ and ex-situ ion-irradiated additively manufactured 316L and 316H stainless steels

Additively manufactured (AM) 316 stainless steel (SS) differs from its wrought counterpart in its unique dislocation cell structure and the presence of segregation and oxide particles at the cell walls. This work investigated the evolution of the microstructure in laser powder bed fusion (LPBF) 316L and 316H SS under in-situ 1 MeV Kr ion irradiation at 600 °C to 5 dpa, and ex-situ 4 MeV Ni ion irradiation at 300 °C and 600 °C from 0.2 dpa to 10 dpa, with a dose rate for all experiments of 10 -3 dpa/s. The results reveal that the dislocation cell structure results in heterogeneous formation of dislocation loops and voids, particularly at 600 °C, where loops tend to form within the cell interiors while voids form at the cell boundaries. LPBF 316H has a reduced level of swelling compared to LPBF 316L due to prolonged incubation. Energy Dispersive X-ray Spectroscopy (EDS) mapping indicates Ni and Si segregation at void surfaces due to radiation-induced segregation. At 300 °C, where voids are absent, the distribution of dislocation loops and stacking fault tetrahedra appears to be uniform. Dislocation cell structures mostly disappeared by 2 dpa for all conditions in this work. M 23 C 6 carbides were observed in LPBF 316H at 600 °C as early as 0.2 dpa, but not in LPBF 316L. Nanoindentation was performed to obtain the hardness of irradiated materials. In conclusion, this work illustrated the influence of additive manufacturing processes on microstructure evolution under irradiation, revealing the differences as well as the similarities as compared with wrought 316 SS, and the AM-related phenomenon that can potentially occur under neutron irradiation in nuclear reactors.

36 - MATERIALS SCIENCE↗

DOE OSTI2021

Gaussian process regression for radiological contamination mapping [Slides]

Abstract not provided.

61 RADIATION PROTECTION AND DOSIMETRY↗

DOE OSTI2022

Radiative Width of K*(892) from Lattice Quantum Chromodynamics

In this dissertation, we use lattice quantum chromodynamics to explore the radiative transitions of ?K to K, to calculate the radiative-width of the resonant K?(892) which appears in the P-wave ?K ? ?K transition amplitude. The matrix elements are extracted from three-point functions calculated in a finite-volume discretized lattice with a pion mass of 284 MeV. The finite-volume amplitudes, which are constrained over a large number of ?K energy-points and four-momentum transfers, are mapped to the infinite volume transition amplitude by using the Lellouch-Lüscher formalism. The radiative width is determined to be ? = 35 ± 8 keV by analytically continuing the amplitude into the complex energy plane and calculating the residue at the K? pole.

Radhakrishnan, Archana↗

DOE OSTI2024

Mapping Electron Beam-Induced Radiolytic Damage in Molecular Crystals

Every electron crystallography experiment is fundamentally constrained by radiation damage [1]. Despite its crucial importance, little is understood about the onset and progression of radiolysis in beam-sensitive molecular crystals [2]. Since the typical metric used for monitoring the degradation induced by radiolysis is the attenuation of Bragg reflections in electron diffraction patterns [3], the scope of previous analyses [2-6] has mostly been limited to indirect observation via the back focal plane. Here, a simultaneous visualization of the effects of electron beam-induced radiolysis—in both real space and reciprocal space—remains elusive.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2025

Synoptic Weather Regime Classifications for June, July, August, and September, 2022

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A). This dataset includes the data in June, July, August, and September; the last year of the data is 2022.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Synoptic Weather Regime Classifications for the whole year, from 2014 to 2015

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Synoptic Weather Regime Classifications for June, July, August, from 2000 to 2024

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

node_som_ml↗

DOE OSTI2025

Synoptic Weather Regime Classifications for March, April and May, from 2000 to 2025

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

node_som_ml↗

DOE OSTI2025

Synoptic Weather Regime Classifications for June, July and August, from 2000 to 2025

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

node_som_ml↗

DOE OSTI2025

Synoptic Weather Regime Classifications for December, January and February, from 2000 to 2025

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

{node_som_ml,synop_wea_reg}↗

DOE OSTI2025

Synoptic Weather Regime Classifications for September, October and November, from 2000 to 2025

The synoptic weather regime classification has become a highly demanded product for the ARM site in recent years. This type of regime classification has shown applications in various studies and topics, including aerosol-cloud interactions, land-atmosphere interactions, and cloud radiative effects. The VAP employs an unsupervised machine learning method, Self-organizing map (SOM), to classify weather regimes for each day of the AMF campaigns and fixed sites, using ERA5 data. This idea is mainly based on our published study for TRACER in Wang et al. (2022, JGR-A).

node_som_ml↗

DOE OSTI2024

3D hybrid fluid-particle jet simulations and the importance of synchrotron radiative losses

Context. Relativistic jets in active galactic nuclei are known for their exceptional energy output, and imaging the synthetic synchrotron emission of numerical jet simulations is essential for a comparison with observed jet polarization emission. Aims. Through the use of 3D hybrid fluid-particle jet simulations (with the PLUTO code), we overcome some of the commonly made assumptions in relativistic magnetohydrodynamic (RMHD) simulations by using non-thermal particle attributes to account for the resulting synchrotron radiation. Polarized radiative transfer and ray-tracing (via the RADMC-3D code) highlight the differences in total intensity maps when (i) the jet is simulated purely with the RMHD approach, (ii) a jet tracer is considered in the RMHD approach, and (iii) a hybrid fluid-particle approach is used. The resulting emission maps were compared to the example of the radio galaxy Centaurus A. Methods. We applied the Lagrangian particle module implemented in the latest version of the PLUTO code. This new module contains a state-of-the-art algorithm for modeling diffusive shock acceleration and for accounting for radiative losses in RMHD jet simulations. The module implements the physical postulates missing in RMHD jet simulations by accounting for a cooled ambient medium and strengthening the central jet emission. Results. We find a distinction between the innermost structure of the jet and the back-flowing material by mimicking the radio emission of the Seyfert II radio galaxy Centaurus A when considering an edge-brightened jet with an underlying purely toroidal magnetic field. We demonstrate the necessity of synchrotron cooling as well as the improvements gained when directly accounting for non-thermal synchrotron radiation via non-thermal particles.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Disentangling multiple gas kinematic drivers in the Perseus galaxy cluster

Galaxy clusters, the Universe’s largest halo structures, are filled with an X-ray-emitting gas with a temperature between 10 million and 100 million degrees. Their evolution is shaped by energetic processes such as feedback from supermassive black holes (SMBHs) and mergers with other cosmic structures. The imprints of these processes on gas kinematics remain largely unknown, restricting our understanding of energy conversion within clusters4. High-resolution spectral mapping with the X-Ray Imaging and Spectroscopy Mission (XRISM) observatory offers a way forward. Here we present XRISM kinematic measurements of the Perseus cluster, radially covering the extent of its cool core. We find direct evidence for at least two dominant drivers of gas motions operating on distinct physical scales: a small-scale driver in the inner approximately 60 kpc, probably associated with the SMBH feedback; and a large-scale driver in the outer core, powered by mergers. This finding suggests that, during the active phase, SMBH feedback drives gas motions, which, if fully dissipated into heat, could have a substantial role in offsetting radiative cooling losses in the Perseus core. Furthermore, our study underscores the necessity of kinematic mapping observations of extended sources to robustly characterize the velocity fields and their role in the evolution of massive halos. It further offers a kinematic diagnostic for SMBH feedback models.

Astronomy and AstroPhysics↗

DOE OSTI2022

Chromatin structure predicts survival in glioma patients

The pathological changes in epigenetics and gene regulation that accompany the progression of low-grade to high-grade gliomas are under-studied. The authors use a large set of paired atac-seq and RNA-seq data from surgically resected glioma specimens to infer gene regulatory relationships in glioma. Thirty-eight glioma patient samples underwent atac-seq sequencing and 16 samples underwent additional RNA-seq analysis. Using an atac-seq/RNA-seq correlation matrix, atac-seq peaks were paired with genes based on high correlation values (|r 2 | > 0.6). Samples clustered by IDH1 status but not by grade. Surprisingly there was a trend for IDH1 mutant samples to have more peaks. The majority of peaks are positively correlated with survival and positively correlated with gene expression. Constructing a model of the top six atac-seq peaks created a highly accurate survival prediction model (r 2 = 0.68). Four of these peaks were still significant after controlling for age, grade, pathology, IDH1 status and gender. Grade II, III, and IV (primary) samples have similar transcription factors and gene modules. However, grade IV (recurrent) samples have strikingly few peaks. Patient-derived glioma cultures showed decreased peak counts following radiation indicating that this may be radiation-induced. This study supports the notion that IDH1 mutant and IDH1 wildtype gliomas have different epigenetic landscapes and that accessible chromatin sites mapped by atac-seq peaks tend to be positively correlated with expression. The data in this study leads to a new model of treatment response wherein glioma cells respond to radiation therapy by closing open regions of DNA.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Monte Carlo Simulation with CAD Interface for Calculation of 3D Maps of Residual Dose (CRADA)

Objective: To develop an easy-to-use software application to predict and mitigate radiation effects in research environment, space instruments, nuclear plants and medical facilities and help nonproliferation and national security efforts. Tech-X will develop standalone software libraries and command-line tools for ( 1) translating CAD into tessellated surfaces and tetrahedral meshes in GDML (for Geant4 and MARS 15), ROOT (for MARS 15) and HDF5 (for compact representation and for the visualization) formats, (2) healing CAD geometries to make them suitable for Monte Carlo simulations; (3) creating uniform and variable Cartesian and cylindrical meshes for detailed scoring; and ( 4) efficient Monte Carlo navigation in CAD geometries. JLAB will finish automation of simulations of residual dose in CAD geometries and integrate Tech-X software into Geant4 and MARS15. Finally, Tech-X will develop a Graphical User Interface to set up and heal CAD geometries, create input files, run and visualize simulations for residual dose. This application will run on local desktops, local and remote clusters and supercomputers and will be made available through public clouds, such as Amazon Web Services.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

A coupled fluid-mechanical workflow to simulate the directed energy deposition additive manufacturing process

Simulation of additive manufacturing processes can provide essential insight into material behavior, residual stress, and ultimately, the performance of additively manufactured parts. In this work, we describe a new simulation based workflow utilizing both solid mechanics and fluid mechanics based formulations within the finite element software package SIERRA (Sierra Solid Mechanics Team in Sierra/Solid Mechanics 4.52 User’s Guide SAND2019-2715. Technical report, Sandia National Laboratories, 2011) to enable integrated simulations of directed energy deposition (DED) additive manufacturing processes. In this methodology, a high-fidelity fluid mechanics based model of additive manufacturing is employed as the first step in a simulation workflow. This fluid model uses a level set field to track the location of the boundary between the solid material and background gas and precisely predicts temperatures and material deposition shapes from additive manufacturing process parameters. Next, the resulting deposition shape and temperature field from the fluid model are then mapped into a solid mechanics formulation to provide a more accurate surface topology for radiation and convection boundary conditions and a prescribed temperature field. Solid mechanics simulations are then conducted to predict the evolution of material stresses and microstructure within a part. By combining thermal history and deposition shape from fluid mechanics with residual stress and material property evolutions from solid mechanics, additional fidelity and precision are incorporated into additive manufacturing process simulations providing new insight into complex DED builds.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Imaging 3D chemistry at 1 nm resolution with fused multi-modal electron tomography

Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment is completed. Even larger doses are required to achieve high resolution. Thus, chemical mapping in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one-nanometer resolution in an Au-Fe 3 O 4 metamaterial within an organic ligand matrix, Co 3 O 4 -Mn 3 O 4 core-shell nanocrystals, and ZnS-Cu 0.64 S 0.36 nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX/EELS) signals. We thus demonstrate that sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Single-shot in-line x-ray phase-contrast imaging of void-shockwave interactions in fusion energy materials

Recent breakthroughs in nuclear fusion, specifically the report of reactions exceeding scientific breakeven at the National Ignition Facility (NIF), highlight the potential of inertial fusion energy (IFE) as a sustainable and virtually limitless energy source. However, further progress in IFE requires characterization of defects in ablator materials and how they affect fuel capsule compression. Voids within the ablator can degrade energy yield, but their impact on the density distribution has primarily been studied through simulations, with limited high-resolution experimental validation. To address this, we used the x-ray free-electron laser (XFEL) at the matter in extreme conditions (MECs) instrument at the Linac coherent light source (LCLS) to capture 2D x-ray phase-contrast (XPC) images of a void-bearing sample with a composition similar to inertial confinement fusion (ICF) ablators. By driving a compressive shockwave through the sample using MEC's long-pulse laser system, we analyzed how voids influence shockwave propagation and density distribution during compression. To quantify this impact, we extracted phase information using two phase retrieval algorithms. First, we applied the contrast transfer function (CTF) method, paired with Tikhonov regularization and a fast optimization approach to generate an initial phase estimate. We then refined the result using a projected gradient descent (PGD) method that works directly with the sample's refractive index. Comparing these results with radiation adaptive grid Eulerian (xRAGE) radiation hydrodynamic simulations enables identification of model validation needs or improvements. By calculating phase maps in situ, it becomes possible to reconstruct areal density maps, improving understanding of laser-capsule interactions and advancing IFE research.

Hodge, D. S. [Colorado State Univ., Fort Collins, ↗