Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

High-resolution laser-induced fluorescence spectroscopy of 28 Si 16 O + and 29 Si 16 O + in a cryogenic buffer-gas cell

Here, the electronic, laser-induced fluorescence spectrum of the B 2 Σ + ← X 2 Σ + transition in 28 Si 16 O + and 29 Si 16 O + has been recorded in a cryogenic buffer gas cell at K. Molecular constants are extracted for both 28 Si 16 O + and 29 Si 16 O + , including the Fermi contact hyperfine constant for both the B and X states of 29 Si 16 O + , and used in a discussion of the suitability of SiO in future quantum information experiments.

47 OTHER INSTRUMENTATION↗

Effect of interfacial layer on the crystal structure of InAs/AlAs{sub 0.16}Sb{sub 0.84}/AlSb quantum wells

Ion channeling technique using MeV C{sup 2+} ions and high resolution X-ray diffraction were used to study the crystal quality of an InAs/AlSb-based quantum wells. We found that the InAs quality has a strong dependence on the type of the interface used. With the addition of the InSb-like interface, the crystal quality of the InAs channel was greatly improved. The InAs lattice was fully strained and aligned with the lattice of the buffer layer without any lattice relaxation. On the other hand, if the interface was of the AlAs type, the lattice of the InAs quantum well was relaxed and the crystal quality was poor. This explains why a superior InAs quantum well with high electron mobility and good surface morphology can be achieved with the use of the InSb interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Fast Parallel Algorithm for Selected Inversion of Structured Sparse Matrices with Application to 2D Electronic Structure Calculations

We present an efficient parallel algorithm and its implementation for computing the diagonal of $H^-1$ where $H$ is a 2D Kohn-Sham Hamiltonian discretized on a rectangular domain using a standard second order finite difference scheme. This type of calculation can be used to obtain an accurate approximation to the diagonal of a Fermi-Dirac function of $H$ through a recently developed pole-expansion technique \cite{LinLuYingE2009}. The diagonal elements are needed in electronic structure calculations for quantum mechanical systems \citeHohenbergKohn1964, KohnSham 1965,DreizlerGross1990. We show how elimination tree is used to organize the parallel computation and how synchronization overhead is reduced by passing data level by level along this tree using the technique of local buffers and relative indices. We analyze the performance of our implementation by examining its load balance and communication overhead. We show that our implementation exhibits an excellent weak scaling on a large-scale high performance distributed parallel machine. When compared with standard approach for evaluating the diagonal a Fermi-Dirac function of a Kohn-Sham Hamiltonian associated a 2D electron quantum dot, the new pole-expansion technique that uses our algorithm to compute the diagonal of $(H-z_i I)^-1$ for a small number of poles $z_i$ is much faster, especially when the quantum dot contains many electrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Zero lattice mismatch and twin-free single crystalline ScN buffer layers for GaN growth on silicon

We report the growth of thin ScN layers deposited by plasma-assisted molecular beam epitaxy on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates. Using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, we find that ScN films grown at 600 °C are single crystalline, twin-free with rock-salt crystal structure, and exhibit a direct optical band gap of 2.2 eV. A high degree of crystalline perfection and a very good lattice matching between ScN and GaN (misfit < 0.1%) makes the ScN/Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3} buffer system a very promising template for the growth of high quality GaN layers on silicon.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Model of the radial gas-temperature distribution in a copper bromide vapour laser

An analytic model is proposed to calculate the buffer-gas temperature in the discharge-tube cross section of the copper bromide vapour laser. The model is the generalisation of the previous models developed by the authors. Assuming that the volume electric power is arbitrary distributed over the tube radius, the general solution of the quasi-stationary heat conduction equation with the boundary conditions of the first and second kinds is presented. Application of the model is considered by the example of a copper bromide vapour laser emitting at 510.6 and 578.2 nm at different specific radial distributions of the volume power. The obtained results are compared with the temperature profiles known to date. Application of this model to molecular lasers is also discussed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High resolution InSb quantum well ballistic nanosensors for room temperature applications

We report the room temperature operation of a quasi-ballistic InSb quantum well Hall sensor that exhibits a high frequency sensitivity of 560nT/√Hz at 20uA bias current. The device utilizes a partitioned buffer layer design that suppresses leakage currents through the mesa floor and can sustain large current densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band offset at the heterojunction interfaces of CdS/ZnSnP{sub 2}, ZnS/ZnSnP{sub 2}, and In{sub 2}S{sub 3}/ZnSnP{sub 2}

Heterojunctions were formed between ZnSnP{sub 2} and buffer materials, CdS, ZnS, and In{sub 2}S{sub 3}, using chemical bath deposition. The band offset was investigated by X-ray photoelectron spectroscopy based on Kraut method. The conduction band offset, ΔE{sub C}, between ZnSnP{sub 2} and CdS was estimated to be −1.2 eV, which significantly limits the open circuit voltage, V{sub OC}. Conversely, ΔE{sub C} at the heterojunction between ZnSnP{sub 2} and ZnS was +0.3 eV, which is within the optimal offset range. In the case of In{sub 2}S{sub 3}, ΔE{sub C} was a relatively small value, −0.2 eV, and In{sub 2}S{sub 3} is potentially useful as a buffer layer in ZnSnP{sub 2} solar cells. The J−V characteristics of heterojunction diodes with an Al/sulfides/ZnSnP{sub 2} bulk/Mo structure also suggested that ZnS and In{sub 2}S{sub 3} are promising candidates for buffer layers in ZnSnP{sub 2} thin film solar cells, and the band alignment is a key factor for the higher efficiency of solar cells with heterojunctions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-density InAs/GaAs{sub 1−x}Sb{sub x} quantum-dot structures grown by molecular beam epitaxy for use in intermediate band solar cells

InAs quantum-dot structures were grown using a GaAs{sub 1−x}Sb{sub x} matrix on a GaAs(001) substrate. The use of GaAs{sub 1−x}Sb{sub x} for the buffer and cap layers effectively suppressed coalescence between dots and significantly increased the dot density. The highest density (∼3.5 × 10{sup 11}/cm{sup 2}) was obtained for a nominal 3.0 monolayer deposition of InAs with an Sb composition of x = 13–14% in the GaAs{sub 1−x}Sb{sub x} matrix. When the Sb composition was increased to 18%, the resulting large photoluminescent red shift (∼90 meV) indicated the release of compressive strain inside the quantum dots. For x > 13%, we observed a significant decrease in photoluminescence intensity and an increase in the carrier lifetime (≥4.0 ns). This is attributed to the type-II band alignment between the quantum dots and matrix material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strategies to improve phase-stability of ultrafast swept source optical coherence tomography for single shot imaging of transient mechanical waves at 16 kHz frame rate

We present single-shot phase-sensitive imaging of propagating mechanical waves within tissue, enabled by an ultrafast optical coherence tomography (OCT) system powered by a 1.628 MHz Fourier domain mode-locked (FDML) swept laser source. We propose a practical strategy for phase-sensitive measurement by comparing the phases between adjacent OCT B-scans, where the B-scan contains a number of A-scans equaling an integer number of FDML buffers. With this approach, we show that micro-strain fields can be mapped with ∼3.0 nm sensitivity at ∼16 000 fps. The system's capabilities are demonstrated on porcine cornea by imaging mechanical wave propagation launched by a pulsed UV laser beam, promising non-contact, real-time, and high-resolution optical coherence elastography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study on GaN buffer leakage current in AlGaN/GaN high electron mobility transistor structures grown by ammonia-molecular beam epitaxy on 100-mm Si(111)

The effect of carbon doping on the structural and electrical properties of GaN buffer layer of AlGaN/GaN high electron mobility transistor (HEMT) structures has been studied. In the undoped HEMT structures, oxygen was identified as the dominant impurity using secondary ion mass spectroscopy and photoluminescence (PL) measurements. In addition, a notable parallel conduction channel was identified in the GaN buffer at the interface. The AlGaN/GaN HEMT structures with carbon doped GaN buffer using a CBr{sub 4} beam equivalent pressure of 1.86 × 10{sup −7} mTorr showed a reduction in the buffer leakage current by two orders of magnitude. Carbon doped GaN buffers also exhibited a slight increase in the crystalline tilt with some pits on the growth surface. PL and Raman measurements indicated only a partial compensation of donor states with carbon acceptors. However, AlGaN/GaN HEMT structures with carbon doped GaN buffer with 200 nm thick undoped GaN near the channel exhibited good 2DEG characteristics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of buffer-layer construction and substrate orientation on the electron mobilities in metamorphic In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As structures on GaAs substrates

The influence of construction of the buffer layer and misorientation of the substrate on the electrical properties of In{sup 0.70}Al{sup 0.30}As/In{sup 0.76}Ga{sup 0.24}As/In{sup 0.70}Al{sup 0.30}As quantum wells on a GaAs substrate is studied. The temperature dependences (in the temperature range of 4.2 K < T < 300 K) and field dependences (in magnetic fields as high as 6 T) of the sample resistances are measured. Anisotropy of the resistances in different crystallographic directions is detected; this anisotropy depends on the substrate orientation and construction of the metamorphic buffer layer. In addition, the Hall effect and the Shubnikov–de Haas effect are studied. The Shubnikov–de Haas effect is used to determine the mobilities of electrons separately in several occupied dimensionally quantized subbands in different crystallographic directions. The calculated anisotropy of mobilities is in agreement with experimental data on the anisotropy of the resistances.

36 MATERIALS SCIENCE↗

Ge/SiGe quantum wells on Si(111): Growth, structural, and optical properties

The epitaxial growth of Ge/Si{sub 0.15}Ge{sub 0.85} multiple quantum wells (MQWs) on Si(111) substrates is demonstrated. A 3 μm thick reverse, double-step virtual substrate with a final composition of Si{sub 0.10}Ge{sub 0.90} has been employed. High resolution XRD, TEM, AFM and defect etching analysis has been used for the study of the structural properties of the buffer and of the QWs. The QW stack is characterized by a threading dislocation density of about 3 × 10{sup 7 }cm{sup −2} and an interdiffusion layer at the well/barrier interface of 2.1 nm. The quantum confined energy levels of this system have been calculated using the k·p and effective mass approximation methods. The Ge/Si{sub 0.15}Ge{sub 0.85} MQWs have been characterized through absorption and photoluminescence measurements. The optical spectra have been compared with those of Ge/Si{sub 0.15}Ge{sub 0.85} QWs grown on Si(001) through a thick graded virtual substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Specific features of the photoluminescence of HEMT nanoheterostructures containing a composite InAlAs/InGaAs/InAs/InGaAs/InAlAs quantum well

The specific features of the photoluminescence and the electrical properties of doped nanoheterostructures containing a composite InAlAs/InGaAs/InAlAs quantum well with a thin InAs insert in the middle are studied. The insert thickness is varied in the range from 1.7 to 3.0 nm. It is established that the position of the peaks in the photoluminescence spectra in the photon energy range 0.6–0.8 eV correlates with the InAs insert thickness. Simulation of the band structure shows that the experimentally observed variation in the energy of optical transitions is associated with lowering of the energy of electron and hole states in the quantum well with increasing insert thickness. In the photon energy range 1.24–1.38 eV, optical transitions in the region of the InAlAs buffer-InP substrate interface are observed. The signal photon energy and intensity depend on the features of the formation of this heterointerface and on the conditions of substrate annealing. It is conceived that this is due to the formation of a transition region between the InAlAs buffer and the substrate.

36 MATERIALS SCIENCE↗

Nanoheterostructures with improved parameters for high-speed and efficient plasmon-polariton light emitting Schottky diodes

As a result of theoretical and experimental analyses, the parameters of heterostructures with InAs quantum dots in a GaAs matrix are determined, which provide the development of high-speed and efficient plasmon-polariton near-infrared light-emitting Schottky diodes based on such structures. The quantum dots should be arranged on a heavily doped (to a dopant concentration of 10{sup 19} cm{sup –3}) GaAs buffer layer and be separated from the metal by a thin (10–30 nm thick) undoped GaAs cap layer. The interface between the metal (e.g., gold) and GaAs provides the efficient scattering of surface plasmon-polaritons to ordinary photons if it contains inhomogeneities shaped as metal-filled cavities with a characteristic size of ~30 nm and a surface concentration above 10{sup 10} cm{sup –2}.

36 MATERIALS SCIENCE↗

Buffer-eliminated, charge-neutral epitaxial graphene on oxidized 4H-SiC (0001) surface

Buffer-eliminated, charge-neutral epitaxial graphene (EG) is important to enhance its potential in device applications. Using the first principles Density Functional Theory calculations, we investigated the effect of oxidation on the electronic and structural properties of EG on 4H-SiC (0001) surface. Our investigation reveals that the buffer layer decouples from the substrate in the presence of both silicate and silicon oxy-nitride at the interface, and the resultant monolayer EG is charge-neutral in both cases. The interface at 4H-SiC/silicate/EG is characterized by surface dangling electrons, which opens up another route for further engineering EG on 4H-SiC. Dangling electron-free 4H-SiC/silicon oxy-nitride/EG is ideal for achieving charge-neutral EG.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Collision dynamics of polyatomic molecules containing carbon rings at low temperatures

We explore the collision dynamics of complex hydrocarbon molecules (benzene, coronene, adamantane, and anthracene) containing carbon rings in a cold buffer gas of {sup 3}He. For benzene, we present a comparative analysis of the fully classical and fully quantum calculations of elastic and inelastic scattering cross sections at collision energies between 1 and 10 cm{sup −1}. The quantum calculations are performed using the time-independent coupled channel approach and the coupled-states approximation. We show that the coupled-states approximation is accurate at collision energies between 1 and 20 cm{sup −1}. For the classical dynamics calculations, we develop an approach exploiting the rigidity of the carbon rings and including low-energy vibrational modes without holonomic constraints. Our results illustrate the effect of the molecular shape and the vibrational degrees of freedom on the formation of long-lived resonance states that lead to low-temperature clustering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of prolonged coherence time of the collective spin wave of an atomic ensemble in a paraffin-coated {sup 87}Rb vapor cell

We report a prolonged coherence time of the collective spin wave of a thermal {sup 87}Rb atomic ensemble in a paraffin-coated cell. The spin wave is prepared through a stimulated Raman process. The long coherence time is achieved by prolonging the lifetime of the spins with paraffin coating and minimize dephasing with optimal experimental configuration. The observation of the long-time-delayed-stimulated Stokes signal in the writing process suggests the prolonged lifetime of the prepared spins; a direct measurement of the decay of anti-Stokes signal in the reading process shows the coherence time is up to 300 mus after minimizing dephasing. This is 100 times longer than the reported coherence time in the similar experiments in thermal atomic ensembles based on the Duan-Lukin-Cirac-Zoller and its improved protocols. This prolonged coherence time sets the upper limit of the memory time in quantum repeaters based on such protocols, which is crucial for the realization of long-distance quantum communication. The previous reported fluorescence background in the writing process due to collision in a sample cell with buffer gas is also reduced in a cell without buffer gas.

74 ATOMIC AND MOLECULAR PHYSICS↗