Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pyroclastics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Near-surface flow of volcanic gases on Io

Significant near-surface flow of gas several hundred kilometers from Pele (Plume 1) on Io is indicated by a series of bright, elongate albedo markings. Particles produced at small, local vents are apparently carried as much as 70 km farther 'downwind' from Pele. The gas densities and velocities necessary to suspend 0.1 to 10 micron particles at such a distance imply mass flow rates of 10 to the 7th - 10 to the 9th g/sec. Such flow rates are consistent with other estimates of mass transport by the plume. The large flow rates so far from the source allow an estimate of the rate of resurfacing of Io by lava flows and pyroclastics that is independent of estimates based on meteorite flux or on the amount of solids carried within the plumes themselves.

Lee, S. W.↗
NASA NTRS1982

Ignimbrites of Amazonis Planitia region of Mars

The terms ignimbrite and ash flow tuff are used to describe relatively thin but extensive sheets of material interpreted to be of pyroclastic origin and to consist of volcanic ash or pumice fragments. Criteria for distinguishing ignimbrites from other geologic materials are considered, and characteristics observed for rock units interpreted as ignimbrites in Amazonis Planitia are discussed. A series of rock units which are thought to represent ignimbrites have been mapped along an east-west border zone between the highland plateau and lowland plains of Amazonis Planitia. The area is roughly bounded by a triangle whose apices are the volcanoes Apollinaris Patera, Biblis Patera, and Olympus Mons. Attention is given to aspects of general geology, morphology and stratigraphy, and thickness and volume estimates. Correlations with other data are considered and some theoretical aspects of Martian ignimbrite emplacement are discussed.

Scott, D. H.↗
NASA NTRS1982

Compositional variation in the Hadley Apennine region

Orbital geochemical data in the Hadley Apennine region are related to typical rock compositions and used in determining the distribution of soils derived from the rock types found in this region. Orbital XRF Mg/Si and Al/Si intensities are the orbital data that are used primarily. These data are corrected for spurious interorbit variation using a modification of a previously developed method. The corrected values are than converted to % MgO and % Al2O3, respectively, from theoretical considerations, and as such are compared with similar concentrations for typical lunar rocks and soils of the Apollo 15 landing site. The relationship of the XRF values to Fe, Ti, and Th concentrations, derived from gamma-ray observations, is also considered. It is established that the orbital geochemistry data for this region are consistent with the presence of a mixture of ANT suite and Fra Mauro basalt components frequently dominated by a KREEP basalt component toward the west and by a mafic pyroclastic component toward the east.

Clark, P. E.↗
NASA NTRS1982

High spatial resolution Mg/Al maps of the western Crisium and Sulpicius Gallus regions

High spatial resolution Mg/Al ratio maps of the western Crisium and Sulpicius Gallus regions of the moon are presented. The data is from the X-ray fluorescence experiment and the image enhancement technique in the Laplacian subtraction method using a special least-squares version of the Laplacian to reduce noise amplification. In the highlands region west of Mare Crisium several relatively small patches of smooth material have high local Mg/Al ratio similar to values found in mare sites, suggesting volcanism in the highlands. In the same highland region there were other smooth areas with no high Mg/Al local values and they are probably Cayley Formation material produced by impact mass wasting. The Sulpicius Gallus region has variable Mg/Al ratios. In this region there are several high Mg/Al ratio spots, two of which occur at the highland-mare interface. Another high Mg/Al ratio area corresponds to the Sulpicius Gallus Rima I region. The high Mg/Al ratio material in the Sulpicius Gallus region is probably pyroclastic.

Schonfeld, E.↗
NASA NTRS1982

Late-stage summit activity of Martian shield volcanoes

The preservation of morphologically fresh lava flows which pre-date the most recent episodes of caldera collapse at the summits of Ascraeus, Arsia and Olympus Montes indicates that explosive eruptions were not associated with this stage of Tharsis shield volcanism. The existence of resurfaced floor segments, complex wrinkle ridges, and lava terraces within the summit craters suggests that lava lakes comprised the dominant form of the intra-caldera activity. Multiple collapse episodes on Ascraeus and Olympus Montes are indicated by the nested summit craters. The most plausible cause of caldera collapse appears to be large-scale sub-terminal effusive activity, which is corroborated by the previously recognized existence of large lava flows on the flanks of these volcanoes. Due to the implied sequence of large-scale explosive (silicic) volcanism followed by effusive (basaltic) activity, it appears highly unlikely that ignimbrites or other forms of pyroclastic flows (previously proposed as possible deposits within the Olympus Mons aureole material) were ever erupted from the Tharsis Montes.

Mouginis-Mark, P. J.↗
NASA NTRS1982

Physical and chemical characteristics of Mount St. Helens airborne debris

Tephra and aerosols from the May 18, 1980 eruption of Mount St. Helens, Washington were sampled in the lower stratosphere with a WB-57F aircraft. The main body of the plume was intercepted over western Kansas on May 20, 48 hours after the eruption, at an altitude of 15.2 km. Concentrations on filter samples were 26 ng of SO4(-2) of air and 579 ng of ash/g of air. Angular glass pyroclasts ranged in size from 0.5 to 10 microns, with a mean grain of 2 microns. Samples collected at altitudes of 16.7 and 12.5 km had only traces of SO4(-2) and ash. A second flight was flown, 72 hours after the eruption, on May 21. From north Texas to central Wyoming, at an altitude of 15.2 km less than 0.5 to 38 ng of ash/g of air and 1.0 to 2.2 ng of SO4(-2)/g of air were sampled. At an altitude of 18.3 km, from central Wyoming to NW New Mexico, the plume density and character were variable.

Sedlacek, W. A.↗
NASA NTRS1983

Sedimentary processes and crustal cycling on Venus

Sediment exists on the Venus surface. It is observed in Venera images between outcrops and boulders of sedimentary rocks. Sediment is produced by pyroclastic volcanism and chemical weathering. Chemical weathering is driven by an enhanced activity of water and an elevated surface temperature. Sediment is transported by wind action and lithified by cementration and diagenesis. Cementation may be by carbonate or silica cement; diagenesis may be products of chemical weathering acting as cement, or by compaction and recrystallization of sediment into a texture with interlocking grains. Sediment may be transported from the top of sialic continents (such as Ishtar) to the modal plains where it is deposited, lithified, and integrated into thy local crust. As new layers are added, the bottom of the crust melts and is, in part, returned to the mantle. A steady-state chemical exchange might exist by this mechanism of crustal cycling that links atmosphere, continents, modal plains, and mantle.

Warner, J. L.↗
NASA NTRS1984

Experiments on water/melt explosions, nature of products, and models of dispersal

Experiments were carried out in a steel pressure device using controlled amounts of water and thermite melt to examine the mechanical energy released on explosive mixing following the initial contact of the two materials. An experimental design was used to allow the direct calculation of the mechanical energy by the dynamic lift of the device as recorded both optically and physically. A large number of experiments were run to accurately determine the optimum mixture of water and melt for the conversion of thermal to mechanical energy. The maximum efficiency observed was about 12% at a water/thermite mass ratio of 0.50. These experiments are the basis for the development of models of hydroexplosions and melt fragmentation. Particles collected from the experimental products are similar in size and shape to pyroclasts produced by much larger hydrovolcanic explosions. Melt rupture at optimum ratios produces very fine particles whereas rupture at high or low water/melt ratios produces large melt fragments. Grain surface textures in the experimental products are also related to the water/melt ratio and the mechanism of explosive mixing. It is thus possible to have qualitative information about the nature of the explosion from the sizes and shapes of the fragments produced.

Sheridan, M. F.↗
NASA NTRS1984

Drainage Evolution in the Debris Avalanche Deposits Near Mount Saint Helens, Washington

The 18 May 1980 eruption of Mount St. Helens was initiated by a massive rockslide-debris avalanche which completely transformed the upper 25 km of the North Fork Toutle River valley. The debris was generated by one of the largest gravitational mass movements ever recorded on Earth. Moving at an average velocity of 35 m/s, the debris avalanche buried approximately 60 sq km of terrain to an average depth of 45 m with unconsolidated, poorly sorted volcaniclastic material, all within a period of 10 minutes. Where exposed and unaltered by subsequent lahars and pyroclastic flows, the new terrain surface was characterized predominantly by hummocks, closed depressions, and the absence of an identifiable channel network. Following emplacement of the debris avalanche, a complex interrelationship of fluvial and mass wasting processes immediately began operating to return the impacted area to an equilibrium status through the removal of material (potential energy) and re-establishment of graded conditions. In an attempt to chronicle the morphologic evolution of this unique environmental setting, a systematic series of interpretative maps of several selected areas was produced. These maps, which document the rate and character of active geomorphic processes, are discussed.

Gary L Beach↗
NASA NTRS1983

El Chichon - Composition of plume gases and particles

Aircraft measurements were made of trace gases, atmospheric particles, and condensed acid volatiles in the plume of El Chichon volcano, Chiapas, Mexico, in November 1982. Hydrogen sulfide was the primary gaseous sulfur species in the plume at the time of collection. Concentrations of 28 elements were determined by neutron activation analysis of particulate material from the plume. The volatile elements sulfur, chlorine, arsenic, selenium, bromine, antimony, iodine, tungsten, and mercury were enriched relative to bulk pyroclastic material by factors of 60 to 20,000. Arsenic, antimony, and selenium were associated predominantly with small (not greater than 3 micrometer) particles. Calcium and sodium were present almost exclusively on larger particles and aluminum and manganese were bimodally distributed. Ashladen particulate material injected into the stratosphere during the early violent eruptions was enriched by factors of 10 to 30 relative to ash in some of the same elements observed in the quiescent plume.

Kotra, J. P.↗
NASA NTRS1984

The great Tambora eruption in 1815 and its aftermath

The events consequent to the cataclysmic eruption of Mount Tambora, Indonesia, in April of 1815 are reconstructed by quantitative analytical methods which synthesize data and methods from the volcanological, oceanographic, glaciological, meteorological, climatological, astronomical and historical disciplines. This eruption is noteworthy in having been an order of magnitude greater in discharged pyroclastics volume than the Krakatau eruption of 1883, and further, in exceeding the size of any known eruption in the last 10,000 years. The mean temperature in the Northern Hemisphere dropped by 0.4 to 0.7 C in 1816 as a result of its dust veil. It is suggested that Tambora may be used as a calibrating standard in the investigation of other volcanic eruptions.

Stothers, R. B.↗
NASA NTRS1984

Calderas - A planetary perspective

It is pointed out that volcanoes are morphological expressions of magma composition, eruption processes, and regional tectonics. Thus, the lack of unambiguous silicic volcanoes and pyroclastic flows on Mars implies that compared to earth, its crust is deficient in volatiles and/or the planet lacks a thick granitic crust. Such deductions are examples of comparative planetology, in which knowledge of landforms and processes on one planet are utilized to interpret features and histories on others. In the present study calderas are considered in a comparative planetology context to provide perspective for students who investigate only terrestrial calderas and to search for broadscale relationships between calderas and planetary characteristics. Attention is given to terrestrial calderas, lunar calderas, Martian calderas, calderas on Jupiter's satellite Io, and calderas on Venus. A planetary definition of calderas is proposed.

Wood, C. A.↗
NASA NTRS1985

Remote Sensing Analyses of Localized Lunar Dark Mantle Deposits

Near-infrared spectral reflectance data were obtained for 12 localized lunar dark mantle deposits. The dominant feature in these data is the Fe(+2) absorption band in the 1.0 micron wavelength region. In order to emphasize differences in the characteristics of this absorption band, a straight-line continuum was removed from these spectra. On the basis of the depth and shape of this 1.0 micron absorption band, these spectra can be separated into three groups. Group 1 includes spectra from Grimaldi pyroclastics, Franklin floor, Atlas dhc 1, and Archimedes south rim. Absorption band centers in this group are located near 0.93 to 0.95 microns, and depths are approximately 4 to 5%. The shape of the 1.0 micron band in these spectra can be described as check-like, with a straight, steep short-wavelength edge and a straight longer-wavelength edge with a shallower slope. Group 2 is comprised of spectra from Aristoteles East 1 and 2, Rima Fresnel and Atlas dhc 2. These 1.0 micron bands are centered near 0.96 micron, and are deeper (7%) and more symmetrical than those in Group 1. Spectra in group 3 are represented by that of J. Herschel; which have a moderately deep (7%), broad absorption band in the 1.0 micron wavelength region.

Gaddis, L. R.↗
NASA NTRS1985

The depths of the mare basalt source region

Chemical data for the parental magmas of the nine known VLT Array I pyroclastic glasses show statistically significant trends due to olivine (approximately Fo83) control during their formation by partial melting. The compositional scatter is largely due to compositional variations in the source regions on the + or - 1 percent level. This compositional scatter is small when one considers that the scale of the source region is up to 1000 km, but is sufficient to make positive identification of the residual phase(s) in the source regions difficult. Nevertheless, when the effects of the scatter are properly modeled, it is relatively clear that olivine is the residual phase in the source region. Hence these data and additional constraints indicate that the source regions are at shallow depths in the moon.

Binder, A. B.↗
NASA NTRS1986

Lithology, age and structure of early proterozoic greenstone belts, West African shield

Lithologic and chemical data have been compiled for belts in the Proterozoic terrane. Available stratigraphic information from geologic maps of these areas indicate that a typical sequence is comprised of predominately mafic lava flows (basalt-andesite) at the base, which are overlain by felsic volcanic rocks including pyroclastic rocks and lavas. Lithostratigraphic data indicate the volcanic succession is 6-8 km thick. This is followed by 3-4 km of basaltic lava flows which are locally pillowed, the top of the unit is marked by a distinctive manganese formation (MF) consisting of Mn-Fe rich cherts up to 200 m thick. The youngest volcanic unit consists of mafic tuffs and breccia with a distinctive fragmental texture. Of about 100 chemical analyses reported calc-alkaline rocks constitute 55% and tholeiites 45%. Quartz-normative basalt constitutes 99% of the rock type in the tholeiitic suite. In the calc-alkaline suite, 9% of the analyses is basalt, 45% andesite and the rest is dacite and rhyodacite. The available data lead to the conclusion that the minimum age for the volcanic activity must be between 2200 and 2100 million years. It is significant that Archean ages have not been reported from any of the volcanic belts (1-10).

Attoh, K.↗
NASA NTRS1986

Sedimentological and stratigraphic evolution of the southern part of the Barberton greenstone belt: A case of changing provenance and stability

The sedimentological and stratigraphic evolution of the 3.5 to 3.3 Ga Barberton Greenstone Belt can be divided into three principal stages: (1) the volcanic platform stage during which at least 8 km of mafic and ultramafic volcanic rocks, minor felsic volcanic units, and thin sedimentary layers (Onverwacht Group) accumulated under generally anorogenic conditions; (2) a transitional stage of developing instability during which widespread dacitic volcanism and associated pyroclastic and volcaniclastic sedimentation was punctuated by the deposition of terrigenous debris derived by uplift and shallow erosion of the belt itself (Fig Tree Group); (3) an orogenic stage involving cessation of active volcanism, extensive thrust faulting, and widespread deposition of clastic sediments representing deep erosion of the greenstone belt sequence as well as sources outside of the belt (Moodies Group).

Lowe, D. R.↗
NASA NTRS1986

Rhyolitic components of the Michipicoten greenstone belt, Ontario: Evidence for late Archaen intracontinental rifts or convergent plate margins in the Canadian Shield?

Rhyolitic rocks often are the dominant felsic end member of the biomodal volcanic suites that characterize many late Archean greenstone belts of the Canadian Shield. The rhyolites primarily are pyroclastic flows (ash flow tuffs) emplaced following plinian eruptions, although deposits formed by laval flows and phreatomagmatic eruptions also are presented. Based both on measured tectono-stratigraphic sections and provenance studies of greenstone belt sedimentary sequences, the rhyolites are believed to have been equal in abundance to associated basaltic rocks. In many recent discussions of the tectonic setting of late Archean Canadian greenstone belts, rhyolites have been interpreted as products of intracontinental rifting . A study of the tectono-stratigraphic relationships, rock associations and chemical characteristics of the particularly ell-exposed late Archean rhyolites of the Michipicoten greenstone belt, suggests that convergent plate margin models are more appropriate.

Sylvester, P. J.↗
NASA NTRS1986

Thematic mapper studies of Andean volcanoes

The primary objective was to identify all the active volcanoes in the Andean region of Bolivia. Morphological features of the Tata Sabaya volcano, Bolivia, were studied with the thematic mapper. Details include marginal levees on lava and pyroclastic flows, and summit crater structure. Valley glacier moraine deposits, not easily identified on the multispectral band scanner, were also unambiguous, and provide useful marker horizons on large volcanic edifices which were built up in preglacial times but which were active subsequently. With such high resolution imagery, it is not only possible to identify potentially active volcanoes, but also to use standard photogeological interpretation to outline the history of individual volcanoes.

Francis, P. W.↗