Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “positive ions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

An investigation of the solar zenith angle variation of D-region ionization

Model calculations are carried out with a view to interpreting the solar zenith angle variation of D-region ionization. A model is developed for the neutral chemistry including the transport terms relating to molecular and eddy diffusion. The diurnal behavior is described of the minor neutral constituents formed in an oxygen-hydrogen-nitrogen atmosphere, in the height interval between 30 and 120 km. Computations carried out for two cases of the eddy diffusion coefficients models indicate that the constituents which are important for the D-region positive-ion chemistry do not show a significant variation with zenith angle for values up to 75 deg over the D-region heights. In the ion chemistry model, ion-pair production rates are calculated for solar X-rays between 1 A and 100 A, EUV radiations from 100 A up to the Lyman-alpha line, precipitating electrons, and galactic cosmic rays. The solar zenith angle variation of the positive-ion composition, negative-ion composition, and the electron densities are described up to 75 deg zenith angle, in the height interval between 60 and 100 km.

Ratnasiri, P. A. J.↗
NASA NTRS1985

Quasi-neutrality in the polar cusp

Data from the High Altitude Plasma Instrument on Dynamics Explorer have shown a remarkably close correspondence between the densities of suprathermal electrons and positive ions at altitudes between 16,000 and 23,000 km in the polar cusp. It is argued that this quasi-neutrality results from an ambipolar electric field at the magnetopause, which allows the entry of magnetosheath electrons only to the extent required to balance the charge carried by the positive ions.

Burch, J. L.↗
NASA NTRS1981

The Low Altitude Plasma Instrument /LAPI/

The Low Altitude Plasma Instrument on the Dynamics Explorer-B spacecraft provides high resolution velocity space measurements of positive ions and electrons from 5 eV to 32 keV and a monitor of electrons with energies above 35 keV. It consists of an array of 15 parabolic electrostatic analyzers spanning 180 deg in angle and two Geiger-Mueller counters mounted on a one-degree of freedom scan platform. The platform is controlled by a magnetometer that allows placement of the array to selected angles with respect to the magnetic field. Each parabolic analyzer simultaneously measures electrons and positive ions. The temporal resolution and energy range of the measurements and the detector complement to be sampled are programmable by ground command

Winningham, J. D.↗
NASA NTRS1976

Simultaneous observations of field-aligned currents and particle fluxes in the post-midnight sector

The paper presents several examples of simultaneous measurements of electrons and positive ions (5 eV to 15 eV) and of magnetic field perturbations due to field-aligned currents made on the polar-orbiting ISIS-2 satellite at 1400 km altitude in the early morning local time (MLT) sector. There is a good general correspondence between changes in the gradient of the E-W component of the magnetic field along the spacecraft orbit and changes in the character of the low-energy electron fluxes. The equatorward region of outward current flow in this post-midnight sector is spatially coincident with the isotropic precipitation associated with the low-altitude plasma sheet. In cases examined, electron current density always exceeds positive ion current density by a factor of 10 and usually by a factor of over 100.

Klumpar, D. M.↗
NASA NTRS1978

Three-dimensional plasma measurements within the earth's magnetosphere

Magnetospheric measurements of three-dimensional velocity distributions for positive ions and electrons in the energy range from 1 eV to 45 keV are reported which were obtained with quadrispherical Lepedeas on ISEE 1 and 2. The instrumentation is briefly described, and an extension of energy-time spectrograms to three-dimensional summaries via the use of ancillary energy-spin phase spectrograms for multiple analyzers is outlined. Macroscopic plasma parameters for two crossings of the dayside magnetopause are presented, along with a preliminary evaluation of the kinematical motions of low-energy charged particles within the terrestrial ring current. Nonmonotonic electron velocity distributions presumably related to the generation of electron cyclotron harmonic instabilities are examined. The possible signature of diffusion driven by electrostatic waves is considered, and velocity distributions of positive ions in the dawn magnetotail are investigated.

Frank, L. A.↗
NASA NTRS1989

Results of rocket measurements of D-region ionization over Thumba in MAP

Under MAP, two rockets were launched from Thumba (8.5 N, 76.8 E) around 1030 hrs Lt with identical payloads on 7 and 10 March 1986 for D region studies. Positive ion densities were measured by spherical probe and Gerdien condenser and electron densities were measured by Langmuir probe and propagation experiments. In both flights a valley in ionization height profile was noticed around 83 km. The density of ionization at this altitude was about 4 x 10(2) cu cm. A detailed positive ion-chemical scheme was used to reproduce the measured ionization height profiles. The density of NO needed to reproduce the valley in ionization at 83 km came around 5 x 10(5) cu cm. A photochemical treatment without diffusion process was found inadequate to explain this value of NO. Calculations showed that the value of vertical eddy diffusion needed to reproduce the value of NO was around 10(6)sq cm/s. Interestingly, the same value of eddy diffusion coefficient was obtained when derived in the manner described by Thrane and his coworkers using only the positive ion current data of spherical probes.

Chakrabarty, D. K.↗
NASA NTRS1972

Metallic ions in the equatorial ionosphere

Four positive ion composition measurements of the equatorial E region made at Thumba, India, are presented. During the day, the major ions between 90 and 125 km are NO(+) and O2(+). A metallic ion layer centered at 92 km is observed, and found to contain Mg(+), Fe(+), Ca(+), K(+), Al(+), and Na(+) ions. The layer is explained in terms of a similarly shaped latitude distribution of neutral atoms which are photoionized and charge-exchanged with NO(+) and O2(+). Three body reactions form molecular metallic ions which are rapidly lost by dissociative ion-electron recombination. Nighttime observations show downward drifting of the metallic ion layer caused by equatorial dynamo effects. These ions react and form neutral metals which exchange charges with NO(+) and O2(+) to produce an observed depletion of those ions within the metallic ion region.

Aikin, A. C.↗
NASA NTRS1973

Metallic ions in the equatorial ionosphere.

Four positive ion composition measurements of the equatorial E region at Thumba, India, are presented. During the day, the major ions between 90 and 125 km are NO+ and O2+. The relative concentrations are similar to those observed at midlatitudes but exhibit unusual structural behavior with altitude. A metallic ion layer centered at 92 km is found to contain Mg+, Fe+, Ca+, K+, Al+, Na+, and possibly Si+ ions. The layer is explained in terms of a similarly shaped altitude distribution of neutral atoms that are photoionized and charge exchanged with NO+ and O2+. Three-body reactions form molecular metallic ions that are rapidly lost by dissociative ion-electron recombination.

Aikin, A. C.↗
NASA NTRS1978

An ion cyclotron resonance study of reactions of some atomic and simple polyatomic ions with water

Reactions of various positive ions with water vapor were studied by ion cyclotron resonance mass spectrometric techniques. Rate constants and product distributions were determined for reactions of the ions: Ar(+), Co(+), N2(+), and CO2(+), CH2(+), and CH4(+), CH2Cl(+), HCO(+), H2CO(+), H2COH(+), H2S(+) and HS(+). The results obtained in this work are compared with earlier reported data where available.

Karpas, Z.↗
DOE OSTI2025

Positive and Negative Ion CIMS Measurements, SGP, May-June 2024

The negative ion measurements were taken using two LTOF-CIMS with two different nitrate inlets. The data labeled Aerodyne_Inlet used an Aerodyne nitrate inlet. Data labeled PCC used a custom transverse inlet. The positive ion measurements were taken using one LTOF-CIMS with hydronium as an ionization reagent using a custom transverse inlet with an inlet voltage difference of 700 V. See https://doi.org/10.1021/acs.jpca.2c01672 for more information. Peaks were autofit using tofware. Positive ion data is published in the form of peak signal/reagent signal. Data files of peak signal/reagent signal for the two mass spectrometers for the negative ion measurements are separate. Concentrations of H2SO4 are combined into one file. When measurements were overlapping, measurements from the Aerodyne nitrate inlet were used.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A machine learning approach for increased throughput of density functional theory substitutional alloy studies

In this study, a machine learning-based technique is developed to reduce the computational cost required to explore large design spaces of substitutional alloys. The first advancement is based on a neural network (NN) approach to predict the initial position of minority and majority ions prior to DFT relaxation. The second advancement is to allow the NN to predict the total energy for every possibility minority ion position and select the most stable configuration in the absence of relaxing each trial minority configuration. A bismuth oxide materials system, (Bi x La y Yb z ) 2 MoO 6 , was used as the model system to demonstrate the developed methods and quantify the resulting computational speedup. Compared to a brute force method that requires the calculation of every permutation of minority configuration and subsequent DFT relaxation, a 1.3× speedup was realized if the NN predicted the initial configuration of ions prior to relaxation. Implementation of the second advancement allowed the NN to predict the total energy for all possible trial configurations and downselect the most stable configurations prior to relaxation, resulting in a speedup of approximately 37×. Validation was done by comparing position and energy between the NN and DFT predictions. A maximum position vector mean squared error (MSE) of 1.6 × 10 -2 and a maximum energy MSE of 2.3 × 10 -7 was predicted for the worst case configuration. This method demonstrates a significant computational speedup, which has the potential for even greater computational savings for larger compositional design spaces.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Voyager 2 plasma ion observations in the magnetosphere of Uranus

Positive ion measurements in the magnetosphere of Uranus have been made by the Voyager 2 plasma science experiment. The paper presents an overview of the entire data set and a detailed analysis of the observations from the inner magnetosphere which complements and extends results reported elsewhere. Densities and temperatures are obtained from an analysis which incorporates details of the instrumental response. These results are then used to calculate flux tube particle and energy content to support the hypothesis that the plasma transport is controlled by a solar wind-driven magnetospheric convection system. Variations in the flux tube content suggest both a local source of plasma, produced from the neutral hydrogen corona of Uranus, and a nonlocal source, convected inwared and heated by adiabatic compression. In each case a proton composition is inferred. Sharp boundaries in the high-energy (approximately 1 keV) plasma population are interpreted in terms of the spatial extent of the magnetospheric convection, with significant shielding of the convection electric field. The convection theory is also used in a simulation of the low-energy (approximately 10 eV) ion component using the neutral hydrogen source, resulting in distribution functions which qualitatively agree with the observations.

Selesnick, Richard S.↗
DOE OSTI2023

Diffusion in intact secondary cell wall models of plants at different equilibrium moisture content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na + , K + , Cu2 + , Cl - ) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

09 BIOMASS FUELS↗
NASA NTRS1984

Ion Engine With Solid-Electrolyte Ion Generator

Working fluid utilized efficiently. Working fluid positive ions conducted through solid electrolyte to outside, then accelerated in external electric field. While in solid-electrolyte material, ions do not recombine with electrons: transported to surface with high ionization efficiency. Provides new way to generate beam of ions for implantation in semiconductors or other applications.

Richter, R.↗