Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pore sizes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Local microenvironment tuning induces switching between electrochemical CO 2 reduction pathways

Gas diffusion layers (GDL) have become a critical component in electrochemical CO 2 reduction (CO 2 R) systems because they can enable high current densities needed for industrially relevant productivity. Besides this function, it is often assumed that the choice of catalyst and electrolyte play much more important roles than the GDL in influencing the observed product selectivity. Here, we show that tuning of the GDL pore size can be used to control the local microenvironment of the catalyst and hence, effect significant changes in catalytic outcomes. This concept is demonstrated using sputtered Ag films on hydrophobic PTFE substrates with 6 different pore sizes. Although Ag is known to be a predominantly CO generating catalyst, we find that smaller pore sizes favor the generation of formate up to a faradaic efficiency of 43%. Combined experimental and simulation results show that this is due to the influence of the pore size on CO 2 mass transport, which alters the local pH at the electrode, resulting in reaction pathway switching between CO and formate. Importantly, our results highlight the importance of the local microenvironment as an experimental knob that can be rationally tuned for controlling product selectivity: a key consideration in the design of CO 2 R systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Size Dependence of the Tetragonal to Orthorhombic Phase Transition of Ammonia Borane in Nanoconfinement

We have investigated the thermodynamic property modification of ammonia borane via nanoconfinement. Two different mesoporous silica scaffolds, SBA-15 and MCM-41, were used to confine ammonia borane. Using in situ Raman spectroscopy, we examined how pore size influences the phase transition temperature from tetragonal (I4mm) to orthorhombic (Pmn21) for ammonia borane. In bulk ammonia borane, the phase transition occurs at around 217 K; however, confinement in SBA-15 (with ~8 nm pore sizes) reduces this temperature to approximately 195 K, while confinement in MCM-41 (with pore sizes of 2.1–2.7 nm) further lowers it to below 90 K. This suppression of the phase transition as a function of pore size has not been previously studied using Raman spectroscopy. The stability of the I4mm phase at a much lower temperature can be interpreted by incorporating the surface energy terms to the overall free energy of the system in a simple thermodynamic model, which leads to a significant increase in the surface energy when transitioning from the tetragonal phase to the orthorhombic phase.

Najiba, Shah↗
DOE OSTI2020

Colloidal Three-Dimensional Covalent Organic Frameworks and Their Application as Porous Liquids

Developing solid porous materials into free-flowing liquids with permanent porosity is a promising strategy for overcoming certain limitations of conventional sorbent materials employed in gas storage and separation applications. The ability to control the pore size and chemical functionalities of organic frameworks gives these particular nanoporous materials distinct advantages over other small cage-like molecules or hollow particles that have been developed into porous liquids. Here, we describe the synthesis of a 3D imine-linked colloidal covalent organic framework (COF)-based porous liquid, designed for efficient size-exclusion of solvent, as well as for long-term stability. By tethering ionic liquids to the colloid surface, the colloids can be dried, purified, and resuspended in a variety of solvents without irreversible aggregation typically observed of COF colloids. Colloid size could be controlled between 50 and 400 nm, with surface areas as high as 800 m2/g. The 3D intertwining morphology of the colloids had pore sizes ranging from 5 to 14 Å, allowing them to efficiently sizeexclude bulky ionic liquids. The COF colloids were stable towards flocculation in an ionic liquid for > 1 year. Permanent porosity was confirmed with a combination of 19F NMR measurements and gas sorption techniques. CO2 and CH4 uptake in these porous liquids increased more than 10 and 20-fold, respectively, over non-porous, neat ionic liquid control samples. The work not only advances the state of COF-based colloid science but also represents a practical advance towards developing more robust, tunable framework-based porous liquid materials for a host of gas storage and separation applications.

Mow, Rachel E.↗
NASA NTRS1996

Effective Thermal Conductivity of an Aluminum Foam + Water Two Phase System

This study examined the effect of volume fraction and pore size on the effective thermal conductivity of an aluminum foam and water system. Nine specimens of aluminum foam representing a matrix of three volume fractions (4-8% by vol.) and three pore sizes (2-4 mm) were tested with water to determine relationships to the effective thermal conductivity. It was determined that increases in volume fraction of the aluminum phase were correlated to increases in the effective thermal conductivity. It was not statistically possible to prove that changes in pore size of the aluminum foam correlated to changes in the effective thermal conductivity. However, interaction effects between the volume fraction and pore size of the foam were statistically significant. Ten theoretical models were selected from the published literature to compare against the experimental data. Models by Asaad, Hadley, and de Vries provided effective thermal conductivity predictions within a 95% confidence interval.

Moskito, John↗
DOE OSTI2022

Effects of Supercritical CO 2 Injection on the Shale Pore Structures and Mass Transport Rates

Characterizing the pore structures and transport properties of low-permeability shales is critical for evaluating these formations as potential seals or storage sites for geological CO 2 sequestration. Here, we use low-pressure gas adsorption in conjunction with nuclear magnetic resonance (NMR) to characterize the pore-size distribution of shales before and after injection of supercritical CO 2 . Nitrogen gas was used as the detecting phase for the adsorption experiments and pentane liquid was used for the NMR experiments. We also performed time-resolved NMR and gravimetric microbalance measurements to observe mass transport during desaturation. We use these data to estimate the self-diffusion coefficient of pentane and changes in the saturation state of the pore network. We analyzed samples with a range of compositions from the Wolfcamp shale before and after exposure to supercritical CO 2 for 3 days. Integrating the gas adsorption and NMR data shows how supercritical CO 2 injection alters the pore-size distribution for pore sizes <1 nm to 1 mm. Finally, our results provide insights on how the pore structure and mass transport properties of different shale lithologies may evolve during storage of supercritical CO 2 .

58 GEOSCIENCES↗
NASA NTRS1973

A new method for the determination of thin film porosity

Internal reflection spectroscopy may be used to determine presence of water in thin film pores. Presence of water in such pores is function of relative humidity and pore size. Thus, one can determine pore size by controlling humidity. Fluids with surface tension different from that of water can be used to detect pores.

Beck, T. R.↗
NASA NTRS2003

Gravitational Effects on Distortion in Sintering

During sintering a powder compact gains strength through low-temperature interparticle bonding, usually induced by solid-state surface diffusion, followed by further strength contributions from high-temperature densification. In cases where a liquid phase forms, sintering densification is accelerated and shape retention is sustained while open pores remain and contribute capillary forces. Unfortunately, sintering densification requires the compact become thermally softened to a point where creep strain rates reach levels near 10(exp -2)/s when the liquid forms. On the other hand, thermal softening of the powder compact substantially reduces the strength at high temperatures. Therefore, the in situ strength evolution during sintering is a primary focus to separate compact densification (as required for high performance) with minimized distortion (as required for net-shaping). With respect to gravitation effects on distortion during sintering there are two points of substantial weakness - prior to significant interparticle bonding and during final pore closure. This research is focused on understanding the competition among interparticle neck growth, densification, thermal softening, grain boundary wetting, capillary effects associated with liquid wetting and residual porosity, and gravity. Most surprising is the apparent role of gravity, where the deviatoric stress acting on the powder structure induces skeletal formation that reduces distortion. In contrast with theory, microgravity samples exhibit more distortion yet fail to fully densify. Results are presented on the experimental concepts supporting an emerging model of sintering strength evolution that enables understanding of both distortion and densification. The experiments have relied on tungsten heavy alloys, various combinations of dihedral angle, pore size, initial porosity, liquid:solid ratio, and heating rates. On Earth, the dominant factor with respect to distortion is the starting body heterogeneity. Current modeling efforts are seeking some means to uniformly predict the distortion based on a starting pore structure heterogeneity parameter. Densification is largely unaffected by the initial pore structure, but distortion is highly variable, suggesting that nonuniform pore closure might be a significant parameter during sintering. With respect to flight experiments, plans include removal of the solid body forces acting on the solid grains, allowing stabilization of the pore structure and examination of the buoyancy effects with regard to distortion. In microgravity there is the surprising result that compacts do not densify, yet distort a factor that is contrary to all current sintering models. Densification without distortion during liquid phase sintering was achieved by manipulating microstructure and its evolution during sintering. Microstructure parameters such as the solid volume fraction, dihedral angle, initial porosity, and pore size were varied to measure densification and distortion behavior during LPS using W-Ni-Cu alloys. Green compacts were formed using ethylene-bis-stearamide as a pore-forming agent with the amount of polymer controlling the initial porosity. Different initial pore sizes were generated by varying the polymer particle size. Dihedral angle was varied by changing the Ni:Cu ratio in the alloys. Finally, the solid volume fraction was adjusted via the tungsten content. Distortion was quantified using profiles determined with a coordinate measuring machine to calculate a distortion parameter. Sintering results showed that solid volume fraction and dihedral angle are the dominant factors on densification and distortion during liquid phase sintering. Distortion decreases with increasing solid volume fraction and dihedral angle, while initial porosity and pore size have no observable effect on distortion at nearly full densification. Various strategies emerge to improve distortion control in liquid phase sintering.

German, Randall M.↗
NASA NTRS2000

Electrophoretic Porosimetry of Sol-Gels

It has been hypothesized that gravity has an effect on the formation and resulting microstructure of sol-gels. In order to more clearly resolve the effect of gravity, pores may be non-destructively analyzed in the wet gel, circumventing the shrinkage and coarsening associated with the drying procedure. We discuss the development of an electrophoretic technique, analogous to affinity chromatography, for the determination of pore size distribution and its application to silica gels. Specifically a monodisperse charged dye is monitored by an optical densitometer as it moves through the wet gel under the influence of an electric field. The transmittance data (output) represents the convolution of the dye concentration profile at the beginning of the run (input) with the pore size distribution (transfer function), i.e. linear systems theory applies. Because of the practical difficulty in producing a delta function input dye profile we prefer instead to use a step function. Average pore size is then related to the velocity of this dye front, while the pore size distribution is related to the spreading of the front. Preliminary results of this electrophoretic porosimetry and its application to ground and space-grown samples will be discussed.

Snow, L. A.↗
DOE OSTI2021

Synthesis and characterization of porous polydimethylsiloxane structures with adjustable porosity and pore morphology using emulsion templating technique

Abstract Porous polydimethylsiloxane (PDMS) framework with adjustable pore structures has been fabricated by polymerization of the continuous phase in the emulsion templates. Different types of surfactants, including nonionic (Triton X‐100), cationic (Benzalkonium chloride), anionic (sodium dodecyl sulfate), and silicone‐based block copolymer were used to stabilize the water‐in‐oil emulsion system. Deionized water with a wide range of internal phases varying from 10% to 60% by weight was employed to make the low internal phase emulsion and medium internal phase emulsion. The effect of surfactant type, surfactant concentration, and the internal phase volume on the stability of the emulsion, pore morphology, and pore size distribution was explored. The stability of the emulsion was investigated by comparing the pore morphology of the cured sample at different set times, such as 0, 6, and 72 h. Scanning electron microscopy was employed for the characterization of the porous structures. The image analysis was conducted, and the pore size distribution, porosity, and open‐cell ratio of each sample were calculated. Interconnected pores have been seen in the porous PDMS made from emulsions with an internal phase larger than 30%. The results demonstrated that the frequency of open‐cell pores and the pore size is dependent on the surfactant types.

Abshirini, Mohammad↗
DOE OSTI2020

Converting 2D Nanofiber Membranes to 3D Hierarchical Assemblies with Structural and Compositional Gradients Regulates Cell Behavior

Abstract New methods are described for converting 2D electrospun nanofiber membranes to 3D hierarchical assemblies with structural and compositional gradients. Pore‐size gradients are generated by tuning the expansion of 2D membranes in different layers with incorporation of various amounts of a surfactant during the gas‐foaming process. The gradient in fiber organizations is formed by expanding 2D nanofiber membranes composed of multiple regions collected by varying rotating speeds of mandrel. A compositional gradient on 3D assemblies consisting of radially aligned nanofibers is prepared by dripping, diffusion, and crosslinking. Bone mesenchymal stem cells (BMSCs) on the 3D nanofiber assemblies with smaller pore size show significantly higher expression of hypoxia‐related markers and enhanced chondrogenic differentiation compared to BMSCs cultured on the assemblies with larger pore size. The basic fibroblast growth factor gradient can accelerate fibroblast migration from the surrounding area to the center in an in vitro wound healing model. Taken together, 3D nanofiber assemblies with gradients in pore sizes, fiber organizations, and contents of signaling molecules can be used to engineer tissue constructs for tissue repair and build biomimetic disease models for studying disease biology and screening drugs, in particular, for interface tissue engineering and modeling.

Chen, Shixuan↗
DOE OSTI2023

Solid and gas thermal conductivity models improvement and validation in various porous insulation materials

In the past few decades, significant efforts have been made to improve the theoretical understanding of thermal transport mechanisms in thermal insulation materials and push the thermal conductivity's lower limits. However, most works focused singularly on specific types of materials, and the models used for thermal conductivity predictions are diverse - a model that fits one material might not fit others. Here, we improve and unify the gas and solid thermal conductivity models for porous materials. Through experimental characterization of several different materials as well as literature data for other materials, these models are validated. Further, we have also found that the pressure-dependent gas thermal conductivity of most materials can be well fitted by using one or two pore sizes without using a complex pore size distribution. With the refined models, we decompose the effective thermal conductivity of several thermal insulation materials into gas, solid, and radiation contributions. For cellular (polystyrene and polyurethane) foams, the relative contributions from air, solid, and radiation are 58–75%, 3–11%, 16–38%, respectively. For granular porous materials (polyurethane and silica in this work), the contributions from air, solid, and radiation are 45–66%, 34–46%, and 0–8%, respectively. This work is expected to provide guidance on the design and optimization of the next generation of thermal insulation materials, for example, through the effort of reducing gas conduction and radiation in foams and suppressing gas and solid conduction in aerogels.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Lightweight inorganic membrane module

An apparatus and system for separating a liquid from a mixed gas stream includes a porous graphite foam support comprising graphite foam with pores having a first pore size and a membrane support surface. A porous condensation membrane layer is provided on the membrane support surface, and interlocked with the pores of the graphite foam. The condensation membrane layer includes capillary condensation pores having a second pore size that is less than the first pore size. A mixed gas stream passageway is in fluid communication with the condensation membrane layer. A liquid collection assembly collects condensed liquid from the condensation pores and the graphite foam support pores. A gas inlet is provided for flowing the mixed gas stream into the mixed gas stream passageway. A gas outlet is provided for exhausting gas from the mixed gas stream passageway. A method for separating a liquid from a mixed gas stream is also disclosed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High Pressure Infiltration/Expulsion of Aqueous NaCl in Planar Hydrophobic Nanopores

Pressure-driven permeation of water in a poorly wettable material results in a conversion of mechanical work into surface free energy representing a new form of energy storage, or absorption. When water is replaced by a concentrated electrolyte solution, the storage capacity of a nanoporous medium becomes comparable to high-end supercapacitors. The addition of salt can also reduce the hysteresis of the infiltration/expulsion cycle. Our molecular simulations provide a theoretical perspective into the mechanisms involved in the process, and underlying structures and interactions in compressed nanoconfined solutions. Specifically, we consider aqueous NaCl in planar confinements of widths of 1.0 nm and 1.64 nm and pressures of up to 3 kbar. Open ensemble Monte Carlo simulations utilizing fractional exchanges of molecules for efficient additions/removal of ions have been utilized in conjunction with pressure-dependent chemical potentials to model bulk phases under pressure. Confinements open to these pressurized bulk, aqueous electrolyte phases show reversibility at narrow pore sizes and irreversibility in wider ones, consistent with experiment, as well as strong hysteresis at both pore size. The addition of salt results in significant increases in the solid/liquid interfacial tension in narrower pores and associated infiltration and expulsion pressures. Furthermore, these changes are consistent with strong desalination effects at the lower pore size observed irrespective of external pressure and initial concentration.

25 ENERGY STORAGE↗
DOE OSTI2025

Molar-Mass-Dependent Partitioning of Polyethylene in Nanopores of Model Catalyst Supports from Small-Angle Neutron Scattering

Heterogeneous catalysis offers opportunities to enhance valorization of plastic waste via chemical recycling through control of the upcycled product distributions. Minimizing low-value light hydrocarbons is desired; however, fundamental insights into how to control selectivity are lacking. Here we use contrast variation with small-angle neutron scattering (SANS), model perdeuterated polyethylenes (dPEs), and a model liquid hydrocracking product (tetradecane) to quantify polymer partitioning within mesoporous silica (SBA-15). Polyethylene concentration within the mesopores is increased relative to the bulk solution, and this partitioning increases as the temperature increases. However, this polyethylene partitioning is maximized when the radius of gyration of the polymer chains is comparable to the SBA-15 pore size (10 nm). An increased partitioning at higher temperatures is attributed to entropically driven adsorption of PE within the mesopores. There is no observed preferential partitioning of hexatriacontane (a model oligomer) within the mesopores at the temperatures examined. Furthermore, these results suggest that pore size could promote the selective partitioning of polymer species into the mesopores by size. For plastic upcycling, pore-size-dependent partitioning should increase the probability for the reaction of long polymers over oligomeric and small-molecule polyolefin depolymerization products.

Adsorption↗
NASA NTRS1990

Factors affecting plant growth in membrane nutrient delivery

The development of the tubular membrane plant growth unit for the delivery of water and nutrients to roots in microgravity has recently focused on measuring the effects of changes in physical variables controlling solution availability to the plants. Significant effects of membrane pore size and the negative pressure used to contain the solution were demonstrated. Generally, wheat grew better in units with a larger pore size but equal negative pressure and in units with the same pore size but less negative pressure. Lettuce also exhibited better plant growth at less negative pressure.

Dreschel, T. W.↗
DOE OSTI2025

Manufacturing Li 2 TiO 3 -based tritium breeder materials by volume-controlled spark plasma sintering with an optimized microstructure

Multifunctional ceramic breeder materials are highly desirable for the deuterium-tritium fusion to achieve high efficiency in breeding tritium through neutron irradiation of lithium-containing blankets. Li 2 TiO 3 displays unique attributes as a potential ceramic breeder material. An optimized microstructure with three-dimensional interconnected pore structure is required for rapid transport of the tritium for effective fuel cycle, which however enviably results in the degradation of the thermal-mechanical properties of the breeding materials. In this work, nanocrystalline porous Li 2 TiO 3 ceramic pellets with controlled porosities of 14% and 20% are manufactured by volume-controlled spark plasma sintering. An optimized 3D interconnected pore structure is achieved consisting of both micro-sized pores and nano-sized pores embedded in nanocrystalline matrix, which could be beneficial to facilitate easy removal of bred T and He. Further, the 3D interconnected porous structure is well maintained upon isothermal annealing of the SPS-fabricated pellets at relevant operation temperature of the solid breeding materials. Single-phasic porous pellets also display enhanced thermal-mechanical properties, superior to current state-of-the-art materials which establish their potential as a promising tritium breeder material for nuclear fusion applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1995

The effect of sample holder material on ion mobility spectrometry reproducibility

When a positive detection of a narcotic occurs during the search of a vessel, a decision has to be made whether further intensive search is warranted. This decision is based in part on the results of a second sample collected from the same area. Therefore, the reproducibility of both sampling and instrumental analysis is critical in terms of justifying an in depth search. As reported at the 2nd Annual IMS Conference in Quebec City, the U.S. Coast Guard has determined that when paper is utilized as the sample desorption medium for the Barringer IONSCAN, the analytical results using standard reference samples are reproducible. A study was conducted utilizing papers of varying pore sizes and comparing their performance as a desorption material relative to the standard Barringer 50 micron Teflon. Nominal pore sizes ranged from 30 microns down to 2 microns. Results indicate that there is some peak instability in the first two to three windows during the analysis. The severity of the instability was observed to increase as the pore size of the paper is decreased. However, the observed peak instability does not create a situation that results in a decreased reliability or reproducibility in the analytical result.

Jadamec, J. Richard↗
DOE OSTI2026

Effects of confinement and pressure on the structure and dynamics of carbon dioxide in silica slit pores

An understanding of carbon dioxide fluid properties within geological mesopores is important in applications ranging from carbon sequestration to shale oil recovery. Here, a molecular dynamics study is presented that aims to shed light on these systems by simulation of CO 2 fluid confined in β-cristobalite silica slit pores with different pore widths and pressure conditions. The weakly associating nature of carbon dioxide leads to little difference in structural and interfacial dynamical properties for different pore sizes and pressures. Rather, the behavior is found to be dominated by the entropic effects, namely, how the CO 2 organizes next to the silica surface. The CO 2 self-diffusion coefficient shows the strongest pore size dependence. It is strongly diminished in small pores and does not reach the bulk fluid value even in 6 nm pores. It also decreases with pressure, yielding an activation volume that increases with pore size. These results provide new insight into the behavior of a compressible fluid in nanoscale confinement.

Godahewa, Sahan M. [Univ. of Kansas, Lawrence, KS ↗