Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oregon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Investigation of forest canopy temperatures recorded by the thermal infrared multispectral scanner at H. J. Andrews Experimental Forest

Thermal Infrared Multispectral Scanner (TIMS) data were collected over the H. J. Andrews Experimental Forest in Western Oregon on July 29, 1983 at approximately 1:30 p.m., Pacific Standard Time. The relation of changes in canopy temperature to green leaf biomass levels in reforested clearcuts and old-growth forest was investigated. A digital data base was generated in order to isolate that portion of the thermal emission that could be attributed to surface properties other than the vegetation biomass component. The TIMS appears to be capable of detecting subtle differences in ERT as related to canopy closure and green lead biomass, however calibration techniques are needed to correct for emissivity and atmospheric effects.

Sader, Steven A.↗

Narrow- and broad-band satellite measurements of shortwave radiation - Conversion simulations with a general circulation model

The Oregon State University/Lawrence Livermore National Laboratory general circulation model has been employed as a vehicle for suggesting and exploring various means of converting narrow-band measurements of reflected solar radiation from the earth-atmosphere system to broad-band quantities. For purely illustrative purposes within the model's solar radiation routine, a narrow-band filter function consisting of a square-wave window extending from 0.5 to 0.9 microns is adopted. A limitation of the model, for this sort of endeavor, is that it does not include the wavelength dependence of surface albedos. Nevertheless, the model simulations tend to mimic the calibration of a narrow-band instrument, utilizing reflected solar radiation from the earth-atmosphere system as simultaneously measured by a collocated broad-band instrument; for the model, however, this is done in terms of fluxes, in contrast to instrument-measured radiances. The model results suggest that it might be preferable to perform narrow- to broad-band conversions in terms of planetary albedo (or an equivalent quantity), rather than in terms of reflected fluxes or radiances. Further improvement is achieved if, for instruments that can differentiate between clear and overcast conditions, separate clear and overcast calibrations are performed.

Cess, Robert D.↗

Airborne remote sensing of forest biomes

Airborne sensor data of forest biomes obtained using an SAR, a laser profiler, an IR MSS, and a TM simulator are presented and examined. The SAR was utilized to investigate forest canopy structures in Mississippi and Costa Rica; the IR MSS measured forest canopy temperatures in Oregon and Puerto Rico; the TM simulator was employed in a tropical forest in Puerto Rico; and the laser profiler studied forest canopy characteristics in Costa Rica. The advantages and disadvantages of airborne systems are discussed. It is noted that the airborne sensors provide measurements applicable to forest monitoring programs.

Sader, Steven A.↗

Relationship of Thematic Mapper simulator data to leaf area index of temperate coniferous forests

Regional relationships between remote sensing data and the leaf area index (LAI) of coniferous forests were analyzed using data acquired by an Airborne Thematic Mapper. Eighteen coniferous forest stands with a range of projected leaf area index of 0.6-16.1 were sampled from an environmental gradient in moisture and temperature across west-central Oregon. Spectral radiance measurements to account for atmospheric effects were acquired above the canopies from a radiometer mounted on a helicopter. A strong positive relationship was observed between LAI of closed canopy forest stands and the ratio of near-infrared and red spectral bands. A linear regression based on LAI explained 83 percent of the variation in the ratio of the atmospherically corrected bands. A log-linear equation fit the asymptotic characteristic of the relationship better, explaining 91 percent of the variance. The positive relationship is explained by a strong asymptotic inverse relationship between LAI and red radiation and a relatively flat response between LAI and near-infrared radiation.

Peterson, David L.↗

Research in remote sensing of vegetation

The research topics undertaken were primarily selected to further the understanding of fundamental relationships between electromagnetic energy measured from Earth orbiting satellites and terrestrial features, principally vegetation. Vegetation is an essential component in the soil formation process and the major factor in protecting and holding soil in place. Vegetation plays key roles in hydrological and nutrient cycles. Awareness of improvement or deterioration in the capacity of vegetation and the trends that those changes may indicate are, therefore, critical detections to make. A study of the relationships requires consideration of the various portions of the electromagnetic spectrum; characteristics of detector system; synergism that may be achieved by merging data from two or more detector systems or multiple dates of data; and vegetational characteristics. The vegetation of Oregon is sufficiently diverse as to provide ample opportunity to investigate the relationships suggested above several vegetation types.

Schrumpf, Barry J.↗

Using the thermal infrared multispectral scanner (TIMS) to estimate surface thermal responses

A series of measurements was conducted over the H.J. Andrews, Oregon, experimental coniferous forest, using airborne thermal infrared multispectral scanner (TIMS). Flight lines overlapped, with a 28-min time difference between flight lines. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture were used for atmospheric radiance corrections of the TIMS data. Surface temperature differences over time between flight lines were used to develop thermal response numbers (TRNs) which characterized the thermal response (in KJ/sq m/C, where K is the measured incoming solar radiation) of the different surface types. The surface types included a mature forest (canopy dominated by dense crowns of Pseudosuga menziesii, with a secondary canopy of dense Tsuga heterophylla, and also a tall shrub layer of Acer circinatum) and a two-year-old clear-cut. The temperature distribution, within TIMS thermal images was found to reflect the surface type examined. The clear-cut surface had the lowest TRN, while mature Douglas fir the highest.

Luvall, J. C.↗

Marine stratocumulus cloud fields off the coast of southern California observed using Landsat imagery. I - Structural characteristics

The structural characteristics of stratocumulus cloud fields off the coast of southern California are investigated using Landsat Multispectral Scanner imagery. Twelve scenes in this area are examined along with three other stratocumulus scenes near San Francisco, over central Oregon, and in the Gulf of Mexico. Results from this initial study of stratocumulus clouds indicate that cloud-background threshold selection techniques based upon edge detection gradient assumptions are not appropriate for cloud segmentation and classification algorithms, cloud size distributions obey a power law, and cell horizontal aspect ratio increases with cell diameter. It was also found that stratocumulus clouds are bifractal in nature with fractal dimension of d of about 1.2 for cells with diameter D smaller than 0.5 km and d of about 1.5 for cells with D greater than 0.5 km; stratocumulus cloud fields appear to be homogeneous over regions of about 100 km x 100 km, a much smaller region than the 2.5-deg x 2.5-deg boxes to be used in the ISCCP regional averaging algorithms; and that structural properties of stratocumulus clouds observed off the coast of southern California are similar to those observed for stratocumulus clouds at three other locations.

Welch, R. M.↗

AVIRIS data quality for coniferous canopy chemistry

An assessment of AVIRIS data quality for studying coniferous canopy chemistry was made. Seven flightlines of AVIRIS data were acquired over a transect of coniferous forest sites in central Oregon. Both geometric and radiometric properties of the data were examined including: pixel size, swath width, spectral position and signal-to-noise ratio. A flat-field correction was applied to AVIRIS data from a coniferous forest site. Future work with this data set will exclude data from spectrometers C and D due to low signal-to-noise ratios. Data from spectrometers A and B will be used to examine the relationship between the canopy chemical composition of the forest sites and AVIRIS spectral response.

Swanberg, Nancy A.↗

Measurements of short-term thermal responses of coniferous forest canopies using thermal scanner data

Thermal Infrared Multispectral Scanner (TIMS) data were collected over a coniferous forest in western Oregon. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture provided inputs to LOWTRAN6 for atmospheric radiance corrections of the TIMS data. Surface temperature differences measured by the TIMS over time between flight lines were combined with surface radiative energy balance estimates to develop thermal response numbers (TRN). These numbers characterized the thermal response of the diffent surface types. Barren surfaces had the lowest TRN, whereas the forested surfaces had the highest.

Luvall, J. C.↗

Modeling surface temperature distributions in forest landscapes

A model of the frequency distributions of the spatial variability in surface temperature is presented. Surface temperature data are obtained from two daytime and two nighttime flights of the Thermal IR Multispectral Scanner (TIMS) over forest land in western Oregon in August, 1985. The temperature values are corrected for atmospheric attenuation and thermal radiation emission with the LOWTRAN-6 algorithm. The temperature distributions were modeled with a two-parameter beta probability density distribution and the fit of the model was evaluated by comparison with the TIMS data set. Use of the model's parameters to identify and classify surface types shows good discrimination among various surfaces for the daytime images, with less distinct discrimination for the nighttime images.

Holbo, H. R.↗

Eighteenth NASTRAN (R) Users' Colloquium

This publication is the proceedings of the Eighteenth NASTRAN Users' Colloquium held in Portland, Oregon, April 23-27, 1990. It provides some comprehensive general papers on the application of finite elements in engineering, comparisons with other approaches, unique applications, pre- and post-processing or auxiliary programs, and new methods of analysis with NASTRAN.

Source record↗

Impact fracture experiments simulating interstellar grain-grain collisions

Oxide and silicate grains condensing during the early phases of the formation of the solar system or in the outflow of stars are exposed to high partial pressures of the low-z elements H, C, N and O and their simple gaseous compounds. Though refractory minerals are nominally anhydrous and non-carbonate, if they crystallize in the presence of H2O, N2 and CO or CO2 gases, they dissolve traces of the gaseous components. The question arises: How does the presence of dissolved gases or gas components manifest itself when grain-grain collisions occur. What are the gases emitted when grains are shattered during a collision event. Researchers report on fracture experiments in ultrahigh vacuum (UHV, approximately less than 10 to the -8th power mbar) designed to measure (by means of a quadrupole mass spectrometer, QMS, with microns to ms time resolution) the emission of gases and vapors during and after impact (up to 1.5 sec). Two terrestrial materials were chosen which represent structural and compositional extremes: olivine (San Carlos, AZ), a densely packed Mg-Fe(2+) silicate from the upper mantle, available as 6 to 12 mm single crystals, and obsidian (Oregon), a structurally open, alkaline-SiO2-rich volcanic glass. In the olivine crystals OH- groups have been identified spectroscopically, as well as H2 molecules. Obsidian is a water-rich glass containing OH- besides H2O molecules. Olivine from the mantle often contains CO2, either as CO2-rich fluid in fluid inclusions or structurally dissolved or both. By analogy to synthetic glasses CO2 in the obsidian may be present in form of CO2 molecules in voids of molecular dimensions, or as carbonate anions, CO3(2-). No organic molecules have been detected spectroscopically in either material. Results indicate that refractory oxide/silicates which contain dissolved traces of the H2O and CO/CO2 components but no spectroscopically detectable traces of organics may release complex H-C-O (possibly H-C-N-O) molecules upon fracture, plus metal vapor. This points: (1) at complex reaction mechanisms between dissolved H2O, CO/CO2 (and N2) components within the mineral structure or during fracture, and (2) at the possibility that similar emission processes occur following grain-grain collisions in interstellar dust clouds.

Freund, Friedemann↗

The use of aircraft-based Thermal Infrared Multispectral Scanner (TIMS) data to measure surface energy budgets on a landscape scale

A series of Thermal Infrared Multispectral Scanner Data (TIMS) was collected over the H. J. Andrews experimental forest in western Oregon and at the Coweeta Hydrologic Laboratory in North Carolina. Flight lines were overlapped with an 8 to 28 minute time difference between flight lines. Concurrent radiosonde measurements of atmospheric profiles of air and dew point temperatures provided inputs to LOWTRAN6 for atmospheric radiance corrections of the TIMS data. Surface temperature differences over time between flight lines allowed the development of thermal response numbers (TRN) which characterized the thermal response of the different surface types. The polygons containing mostly soil and bare rock had the lowest TRN whereas the forested polygons were the highest. Results indicate that forest canopy temperatures measured by the TIMS are comparable to needle thermocouples temperatures. ET models developed from the TIMS data obtained similar ET rates as those using energy balance techniques.

Luvall, Jeffrey C.↗

Remote sensing of the seasonal variation of coniferous forest structure and function

One of the objectives of the Oregon Transect Ecosystem Research (OTTER) project is the remotely sensed determination of the seasonal variation of leaf area index (LAI) and absorbed photosynthetically active radiation (APAR). These measurements are required for input into a forest ecosystem model which predicts net primary production evapotranspiration, and photosynthesis of coniferous forests. Details of the study are given.

Spanner, Michael↗

Using Landsat to provide potato production estimates to Columbia Basin farmers and processors

A summary of project activities relative to the estimation of potato yields in the Columbia Basin is given. Oregon State University is using a two-pronged approach to yield estimation, one using simulation models and the other using purely empirical models. The simulation modeling approach has used satellite observations to determine key dates in the development of the crop for each field identified as potatoes. In particular, these include planting dates, emergence dates, and harvest dates. These critical dates are fed into simulation models of crop growth and development to derive yield forecasts. Two empirical modeling approaches are illustrated. One relates tuber yield to estimates of cumulative intercepted solar radiation; the other relates tuber yield to the integral under the GVI curve.

Source record↗

AMPR/SSMI data comparisons

The AMPR (Advanced Microwave Precipitation Radiometer) was flown for the first time with successful data collection over precipitation targets in Florida and off the Oregon coast. The AMPR met its expected performance levels with very low noise and relatively troublefree operation. Numerous rain cloud systems over land and ocean were overflown and the measurements at 10.7, 19.35, 37.1, and 85.5 GHz reveal a wide variety of microphysical conditions which exist within rain cloud systems. Although predicted by radiative transfer model calculations from cloud model simulations, this diversity was not observed before due to the poor spatial resolution of spaceborne microwave radiometers. Saturation of the 19.35 GHz rain emission signal was frequently observed in the oceanic rain systems, supporting the desirability of a 10 GHz channel on the TRMM (Tropical Rain Measuring Mission) microwave radiometer for sensitivity to the higher rain rates.

Spencer, Roy W.↗

Comparison of 7.5-minute and 1-degree digital elevation models

Two digital elevation models are compared for the Echo Mountain SE quadrangle in the Cascade Mountains of Oregon. Comparisons were made between 7.5-minute (1:24,000-scale) and 1-degree (1:250,000-scale) images using the variables of elevation, slope aspect, and slope gradient. Both visual and statistical differences are presented.

Isaacson, Dennis L.↗

The seasonality of AVHRR data of temperate coniferous forests - Relationship with leaf area index

The relationship between the advanced very high resolution radiometer (AVHRR) normalized difference vegetation index (NDVI) and coniferous forest leaf area index (LAI) over the western United States is examined. AVHRR data from the NOAA-9 satellite were acquired of the western U.S. from March 1986 to November 1987 and monthly maximum value composites of AVHRR NDVI were calculated for 19 coniferous forest stands in Oregon, Washington, Montana, and California. It is concluded that the relationships under investigation vary according to seasonal changes in surface reflectance based on key biotic and abiotic controls including phenological changes in LAI caused by seasonal temperature and precipitation variations, the proportions of surface cover types contributing to the overall reflectance, and effects resulting from large variations in the solar zenith angle.

Spanner, Michael A.↗