Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “offshore environment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Application of ERTS-1 data to the protection and management of New Jersey's coastal environment

The author has identified the following significant results. The principal thrust of this ERTS-1 experiment is to develop quasi-operational information products from analysis of ERTS-1 imagery and collateral aerial photography and to apply these products to the practical regulation, protection, and management of New Jersey's coastal environment. Incorporated into this goal is the development of procedures for the operational use of ERTS-1 data products within New Jersey's Department of Environmental Protection. Analysis and product preparation for operational needs has centered on four major coastal resource problem areas: detection of land use changes in the coastal zone; siting of ocean outfalls; monitoring of offshore waste disposal; and calculation of recession rates along the Atlantic Shore. The relative utility and estimated monetary benefits derived from ERTS and aircraft imagery for each problem area have been determined. Of equal importance is the development to a capability within the State to use and understand remote sensor-derived information, and the application of this information to meet the requirements of current and anticipated coastal zone legislation.

Yunghans, R. S.↗
DOE OSTI2023

The Impact of Inherited Morphology on Sandbar Migration During Mild Wave Seasons

Sandbars are ubiquitous morphologic features found in the nearshore environment throughout the world, yet predictive capabilities of their evolution remain limited. In order to provide new insights on the relevant processes controlling sandbar morphodynamics, this study uses a 41-year record of 637 monthly cross-shore profiles from Duck, North Carolina, USA, to derive complex empirical orthogonal functions representative of the two dominant modes of sandbar migrations: offshore and onshore propagation. Interference of these two modes produces commonly observed sandbar states. While mild wave energies are traditionally assumed to drive onshore sandbar migration, the offshore mode is repeatedly seen to dominate sandbar migration in mild wave seasons following anomalously high late-winter wave energy and when the inherited morphology is composed of a single bar or terrace, as opposed to a more common two-bar state. A data-derived conceptual model is presented synthesizing the effect of antecedent morphology and wave climate chronology on interannual trends in net offshore sandbar migration.

58 GEOSCIENCES↗
DOE OSTI2022

Triton Field Trials - Changes in Habitats, a Literature Review of Monitoring Technologies

Marine energy devices are installed in highly dynamic environments and have the potential to affect benthic and pelagic habitats around them. Regulatory bodies often require baseline characterization and/or post-installation monitoring to determine whether changes in these habitats are being observed. However, a great diversity of technologies is available for surveying and sampling marine habitats. Selecting the most suitable instrument to identify and measure changes in habitats at marine energy sites can become a daunting task. We conducted a thorough review of journal articles, survey reports, and grey literature to extract information about the technologies used, the data collection and processing methods, and the performance and effectiveness of these instruments. We examined documents related to marine energy development, offshore wind farms, oil and gas offshore sites, and other marine industries around the world over the last 20 years, as well as national and international guidelines for surveying habitats around offshore activities. A total of 120 different technologies were identified across six main habitat categories: seafloor, sediment, infauna, epifauna, pelagic, and biofouling. The technologies were organized into 12 broad technology classes: acoustic, corer, dredge, grab, hook and line, net and trawl, plate, remote sensing, scrape samples, trap, visual, and others. Visual was the most common and the most diverse technology class, with applications across all six habitat categories. Sampling designs varied considerably among the reviewed studies but transect was the predominant design for surveying seafloor, epifauna, and pelagic habitats. The most common data analyses were univariate and multivariate statistical analyses aimed at calculating and comparing biodiversity indices, characterizing faunal assemblages or sediment classes, or modeling the distribution of animals related to abiotic parameters. Technologies and sampling methods adaptable and designed to work efficiently in energetic environments have greater success at marine energy sites. In addition, sampling designs and statistical analyses should be carefully thought through to identify differences in faunal assemblages and spatiotemporal changes in habitats.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Cost Efficiency of Environmental DNA as Compared to Conventional Methods for Biodiversity Monitoring Purposes at Marine Energy Sites

The installation of marine energy systems may affect marine environments, and by extension, marine fish communities. Therefore, biomonitoring is an integral part of assessing impacts on species. Environmental DNA (eDNA) provides a noninvasive alternative to conventional monitoring surveys and the possibility of a more accurate assessment of species richness. Yet, its cost efficiency compared to traditional methods of monitoring is relatively unknown, especially when applied to monitoring around tidal, wave, and offshore wind energy installations. For this study, 202 peer-reviewed journal articles were dissected to inventory the diversity of supplies used for collecting and processing eDNA samples and to compile the average cost of eDNA surveys. Information collected included the type, volume, and brand of containers used in sampling; material, size, and brand of filters; and extraction methods. Cost information was gathered for the most common supplies, and a total cost was estimated for a hypothetical eDNA survey in Sequim Bay, WA, to compare with traditional methods of surveying such as beach seining and scuba surveys. The results showed a higher-than-expected diversity of supplies to collect and process eDNA samples. The most common supplies were 1 L Nalgene bottles at an average cost of 7.96 USD for collecting samples, 0.45 µm glass fiber Merck Millipore filters at an average cost of 1.51 USD for filtering samples, and the Qiagen DNeasy Blood and Tissue kit at 3.54 USD per sample for extracting DNA. When compared to beach seine and scuba surveys, eDNA surveys undertaken by senior researchers are less expensive for both initial surveys with all new materials as well as for follow-up surveys reusing some of the supplies. However, when surveys are done solely by students, eDNA surveys are more expensive than scuba surveys when no prior supplies are available and more than both beach seine and scuba surveys for follow-up surveys reusing supplies. In a professional sphere, where surveys are less often conducted by teams of students only, eDNA surveys are an effective and less-costly alternative to conventional methods. We anticipate that the development and refinement of eDNA methodology will continue to decrease surveying costs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Energy Transition: Challenges and Opportunities for the Oil & Gas Industry

The energy sector has been experiencing a massive but gradual shift in recent years toward renewable and low-carbon energy sources. The future of fossil fuels lies in the ability of the industry to adapt to the market, environment, and social trends within the energy transition framework. In this chapter, we review the challenges that the oil and gas industry will be facing in the coming years. We then explore opportunities and growth areas that this transition provides to the industry. This chapter focuses on three areas of digitization and modernization, developing innovative low-carbon fuels, and harnessing underground and offshore facilities and expertise.

blockchain technology↗
NASA NTRS1989

Multiple-Boundary-Condition Vibration Tests

Multiple-boundary-condition testing method technique to improve analysis of vibrations in large structures. Conceived for vibrational testing, in terrestrial environment, of large, complicated three-dimensional structures intended for use in outer space. Objective of such testing, to identify parameters of mathematical models used to predict vibrations of such structures in absence of gravitation and air. Structure supported and/or restrained at several positions; excited at desired vibrational frequencies, and vibrations measured to determine characteristics of vibrational modes. Potential terrestrial uses in testing and evaluation of dynamics of towers and offshore structures and safety of large buildings in Earthquakes.

Kuo, Chin-Po↗
NASA NTRS1973

Application of ERTS-1 data to the protection and management of New Jersey's coastal environment

The author has identified the following significant results. This catalogue was prepared as a part of the joint ERTS-1 New Jersey coastal mapping experiment. First look analysis of ERTS-1 images indicates that numerous coastal oceanographic patterns can be mapped on a sequential basis using ERTS-1 images. Analysis of imagery indicates a predominant southwesterly drift of dumped wasted in the surface waters. Initial analysis of imagery indicates that the effects of tidal flushing of New York harbor extend as far south as Long Branch, New Jersey. Analysis of imagery from 3 September, 1972, indicates a wide band of turbid water extending several miles offshore around Barnegat Inlet. First look analysis of imagery from 10 October, 1972, illustrates the increased reflectance of turbid waters within the bays, sounds, and thoroughfares behind the barrier islands in the southern New Jersey shore area. The estuarine waters emanating from both Brigantine and Absecon Inlets are very turbid relative to the waters further offshore and to the north and south. The tidal prism appears to be quite large but the movement of water once outside the inlets is not very rapid. The waters are not moving away from the coastline but rather along the coast.

Yunghans, R. S.↗
NASA NTRS2006

Bio-Optical Properties and Ocean Color Algorithms for Coastal Waters Influenced by the Mississippi River During a Cold Front Passage

During the passage of a cold front in March 2002, bio-optical properties examined in coastal waters impacted by the Mississippi River indicated westward advective flows and increasing river discharge containing a larger nonalgal particle content contributed significantly to surface optical variability. A comparison of seasonal data from three cruises indicated spectral models of absorption and scattering to be generally consistent with other coastal environments, while their parameterization in terms of chlorophyll a concentration (Chl) showed seasonal variability. The exponential slope of the colored dissolved organic matter (CDOM) averaged 0.0161 plus or minus 0.00054 per nanometer, and for nonalgal absorption it averaged 0.011 per nanometer with deviations from general trends observed due to anomalous water properties. Although the phytoplankton specific absorption coefficients varied over a wide range (0.02 to 0.1 square meters (mg Chl) sup -1)) being higher in offshore surface waters, values of phytoplankton absorption spectra at the SeaWiFS wavebands were highly correlated to modeled values. The normalized scattering spectral shapes and the mean spectrum were in agreement to observations in other coastal waters, while the backscattering ratios were on average lower in phytoplankton dominated surface waters (0.0101 plus or minus 0.002) and higher in near-bottom waters (0.0191 plus or minus 0.0045) with low Chl. Average percent differences in remote sensing reflectance R (sub rs) derived form modeled and in-eater radiometric measurements were highest in the blue wavebands (52%) and at sampling stations with a ore stratified water column. Estimates of Chl and CDOM absorption derived from SeaWiFS images generated using regional empirical algorithms were highly correlated to in situ data.

D'Sa Eurico J.↗
DOE OSTI2021

Isolating Detrital and Diagenetic Signals in Magnetic Susceptibility Records From Methane‐Bearing Marine Sediments

Abstract Volume‐dependent magnetic susceptibility (κ) is commonly used for paleoenvironmental reconstructions in both terrestrial and marine sedimentary environments where it reflects a mixed signal between primary deposition and secondary diagenesis. In the marine environment, κ is strongly influenced by the abundance of ferrimagnetic minerals regulated by sediment transport processes. Post‐depositional alteration by H 2 S, however, can dissolve titanomagnetite, releasing reactive Fe that promotes pyritization and subsequently decreases κ. Here, we provide a new approach for isolating the detrital signal in κ and identifying intervals of diagenetic alteration of κ driven by organoclastic sulfate reduction (OSR) and the anaerobic oxidation of methane (AOM) in methane‐bearing marine sediments offshore India. Using the correlation of a heavy mineral proxy from X‐ray fluorescence data (Zr/Rb) and κ in unaltered sediments, we predict the primary detrital κ signal and identify intervals of decreased κ, which correspond to increased total sulfur content. Our approach is a rapid, high‐resolution method that can identify overprinted κ resulting from pyritization of titanomagnetite due to H 2 S production in marine sediments. In addition, total organic carbon, total sulfur, and authigenic carbonate δ 13 C measurements indicate that both OSR and AOM can drive the observed κ loss, but AOM drives the greatest decreases in κ. Overall, our approach can enhance paleoenvironmental reconstructions and provide insight into paleo‐positions of the sulfate‐methane transition zone, past enhancements of OSR or paleo‐methane seepage, and the role of detrital iron oxide minerals on the marine sediment sulfur sink, with consequences influencing the development of chemosynthetic biological communities at methane seeps.

58 GEOSCIENCES↗
DOE OSTI2021

Utilizing distributed acoustic sensing and ocean bottom fiber optic cables for submarine structural characterization

The sparsity of permanent seismic instrumentation in marine environments often limits the availability of subsea information on geohazards, including active fault systems, in both time and space. One sensing resource that provides observational access to the seafloor environment are existing networks of ocean bottom fiber optic cables; these cables, coupled to modern distributed acoustic sensing (DAS) systems, can provide dense arrays of broadband seismic observations capable of recording both seismic events and the ambient noise wavefield. Here, we report a marine DAS application which demonstrates the strength and limitation of this new technique on submarine structural characterization. Based on ambient noise DAS records on a 20 km section of a fiber optic cable offshore of Moss Landing, CA, in Monterey Bay, we extract Scholte waves from DAS ambient noise records using interferometry techniques and invert the resulting multimodal dispersion curves to recover a high resolution 2D shear-wave velocity image of the near seafloor sediments. We show for the first time that the migration of coherently scattered Scholte waves observed on DAS records can provide an approach for resolving sharp lateral contrasts in subsurface properties, particularly shallow faults and depositional features near the seafloor. Our results provide improved constraints on shallow submarine features in Monterey Bay, including fault zones and paleo-channel deposits, thus highlighting one of many possible geophysical uses of the marine cable network.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Power at Sea: Use of Wave Energy Converters for Powering Offshore Oil and Gas Operations

New innovative services and goods based on artificial intelligence, next-generation robotics, autonomy, digitization, and electrification are taking root in the ocean economy. More typical competitive forces, such as value enhancement and safety improvement, are also present, as suppliers constantly strive to improve their competitive positioning. Concurrently, the Oil and Gas sector is experiencing mounting pressure to decrease its operational carbon emissions, forcing efforts to reduce or eliminate liquid fuel consumption offshore. Companies in the ocean economy are having to react to this combination of macro- and micro-level drivers and innovate at an ever more rapid pace. However, before many of these new capabilities can be implemented, new, clean, reliable power sources are needed, especially as liquid fuel grows increasingly out of favor. For many of these loads—both old and new and ranging from watts to megawatts—wave energy systems provide the best solution for remote power generation. As such, research, development and demonstration activities are underway to prove wave energy's ability to provide reliable, consistent energy supplies for certain offshore Oil and Gas activities, paving the way for near term commercialization. Furthermore, this paper outlines these drivers, competitive reaction to them, and why and how wave energy can be a preferable choice for power at sea.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Integrated Monitoring of Macroalgae Farms Using Acoustics and UUV Sensing

The vision of this project was to develop an integrated system for autonomous underwater vehicle (AUV) monitoring of offshore kelp farms using acoustic, environmental, and optical sensors. This project supports the overall MARINER goals of developing an offshore kelp aquaculture industry to produce low-carbon or carbon-neutral biofuels. The project commenced in the spring of 2018 and used laboratory experiments to test the efficacy of acoustic sensors for monitoring kelp farm lines and growing kelp biomass. Sensors were then integrated onto two AUVs as well as an autonomous surface vehicle in order to establish the optimal type, price point, and vehicle to most efficiently monitor kelp farm structures, kelp biomass, and the surrounding environment. Multiple field deployments of these vehicles and sensors in Massachusetts, New Hampshire, and Maine confirmed that farm lines and kelp could be visualized and that monitoring the spatial patterns of environmental variables was possible. The COVID-19 pandemic severely limited fieldwork activities and laboratory testing, with deployments around kelp farms not occurring again until January 2021. Time spent away from the field focused on data visualization and the development of a low-cost, vessel-based sensor system. Unfortunately, the low-cost system experienced a disk failure during its first deployment and due to multiple resignations from the project team further engineering and development was not possible. Additionally, final results from acoustic sensor testing in 2021 were also not able to be completed due to the resignation of the postdoc leading the analysis. Despite these setbacks, multiple avenues for further development of optical imagery processing from the 360-degree Kelpcam camera and testing of the low-cost sensor system may be possible.

09 BIOMASS FUELS↗
NASA NTRS2013

Spatially Resolving Ocean Color and Sediment Dispersion in River Plumes, Coastal Systems, and Continental Shelf Waters

Satellite remote sensing of ocean color in dynamic coastal, inland, and nearshorewaters is impeded by high variability in optical constituents, demands specialized atmospheric correction, and is limited by instrument sensitivity. To accurately detect dispersion of bio-optical properties, remote sensors require ample signal-to-noise ratio (SNR) to sense small variations in ocean color without saturating over bright pixels, an atmospheric correction that can accommodate significantwater-leaving radiance in the near infrared (NIR), and spatial and temporal resolution that coincides with the scales of variability in the environment. Several current and historic space-borne sensors have met these requirements with success in the open ocean, but are not optimized for highly red-reflective and heterogeneous waters such as those found near river outflows or in the presence of sediment resuspension. Here we apply analytical approaches for determining optimal spatial resolution, dominant spatial scales of variability ("patches"), and proportions of patch variability that can be resolved from four river plumes around the world between 2008 and 2011. An offshore region in the Sargasso Sea is analyzed for comparison. A method is presented for processing Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua and Terra imagery including cloud detection, stray lightmasking, faulty detector avoidance, and dynamic aerosol correction using short-wave- and near-infrared wavebands in extremely turbid regions which pose distinct optical and technical challenges. Results showthat a pixel size of approx. 520 mor smaller is generally required to resolve spatial heterogeneity in ocean color and total suspended materials in river plumes. Optimal pixel size increases with distance from shore to approx. 630 m in nearshore regions, approx 750 m on the continental shelf, and approx. 1350 m in the open ocean. Greater than 90% of the optical variability within plume regions is resolvable with 500 m resolution, and small, but significant, differences were found between peak and nadir river flow periods in terms of optimal resolution and resolvable proportion of variability.

MODIS↗
DOE OSTI2020

Fate of Internal Waves on a Shallow Shelf

Internal waves strongly influence the physical and chemical environment of coastal ecosystems worldwide. We report novel observations from a distributed temperature sensing (DTS) system that tracked the transformation of internal waves from the shelf break to the surf zone over a narrow shelf slope region in the South China Sea. The spatially continuous view of temperature fields provides a perspective of physical processes commonly available only in laboratory settings or numerical models, including internal wave reflection off a natural slope, shoreward transport of dense fluid within trapped cores, and observations of internal rundown (near-bed, offshore-directed jets of water preceding a breaking internal wave). Analysis shows that the fate of internal waves on this shelf—whether transmitted into shallow waters or reflected back offshore—is mediated by local water column density structure and background currents set by the previous shoaling internal waves, highlighting the importance of wave-wave interactions in nearshore internal wave dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Sea ice breakup and freeze-up indicators for users of the Arctic coastal environment

Abstract. The timing of sea ice retreat and advance in Arctic coastal waters varies substantially from year to year. Various activities, ranging from marine transport to the use of sea ice as a platform for industrial activity or winter travel, are affected by variations in the timing of breakup and freeze-up, resulting in a need for indicators to document the regional and temporal variations in coastal areas. The primary objective of this study is to use locally based metrics to construct indicators of breakup and freeze-up in the Arctic and subarctic coastal environment. The indicators developed here are based on daily sea ice concentrations derived from satellite passive-microwave measurements. The “day of year” indicators are designed to optimize value for users while building on past studies characterizing breakup and freeze-up dates in the open pack ice. Relative to indicators for broader adjacent seas, the coastal indicators generally show later breakup at sites known to have landfast ice. The coastal indicators also show earlier freeze-up at some sites in comparison with freeze-up for broader offshore regions, likely tied to earlier freezing of shallow-water regions and areas affected by freshwater input from nearby streams and rivers. A factor analysis performed to synthesize the local indicator variations shows that the local breakup and freeze-up indicators have greater spatial variability than corresponding metrics based on regional ice coverage. However, the trends towards earlier breakup and later freeze-up are unmistakable over the post-1979 period in the synthesized metrics of coastal breakup and freeze-up and the corresponding regional ice coverage. The findings imply that locally defined indicators can serve as key links between pan-Arctic or global indicators such as sea ice extent or volume and local uses of sea ice, with the potential to inform community-scale adaptation and response.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Control Co-Design of Wind Turbines

Wind energy is recognized worldwide as cost-effective and environmentally friendly, and it is among the fastest-growing sources of electrical energy. To further decrease the cost of wind energy, wind turbines are being designed at ever-larger scales. To expand the deployment of wind energy, wind turbines are also being designed on floating platforms for placement in deep-water locations offshore. Both larger-scale and floating wind turbines pose challenges because of their greater structural loads and deflections. Complex, large-scale systems such as modern wind turbines increasingly require a control co-design approach, whereby the system design and control design are performed in a more integrated fashion. This article reviews recent developments in control co-design of wind turbines. We provide an overview of wind turbine design objectives and constraints, issues in the design of key wind turbine components, modeling of the wind turbine and environment, and controller coupling issues. Wind turbine control functions and the integration of control design in co-design are detailed with a focus on co-design compatible control approaches.

17 WIND ENERGY↗
DOE OSTI2020

A Vector Sensor-Based Acoustic Characterization System for Marine Renewable Energy

NoiseSpotter is a passive acoustic monitoring system that characterizes, classifies, and geo-locates anthropogenic and natural sounds in near real time. It was developed with the primary goal of supporting the evaluation of potential acoustic effects of offshore renewable energy projects. The system consists of a compact array of three acoustic vector sensors, which measures acoustic pressure and the three-dimensional particle velocity vector associated with the propagation of an acoustic wave, thereby inherently providing bearing information to an underwater source of sound. By utilizing an array of three vector sensors, the application of beamforming techniques can provide sound source localization, allowing for characterization of the acoustic signature of specific underwater acoustic sources. Here, performance characteristics of the system are presented, using data from controlled acoustic transmissions in a quiet environment and ambient noise measurements in an energetic tidal channel in the presence of non-acoustic flow noise. Data quality is demonstrated by the ability to reduce non-acoustic flow noise contamination, while system utility is shown by the ability to characterize and localize sources of sound in the underwater environment.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

An adaptive model-free robotic force control strategy for hydrodynamic real-time hybrid simulation of floating offshore wind turbines

Real-time hybrid simulation (RTHS) - a cyber-physical testing approach - promises to enhance the simulation fidelity of the model-scale experiments used to prototype floating offshore wind turbines (FOWTs). In hydrodynamic RTHS (hydro-RTHS), actuators emulate aerodynamic forces on model-scale FOWT specimens subjected to physical waves in a hydrodynamic laboratory. Robotic arms are promising candidates for actuation in hydro-RTHS due to their compact multi-degree-of-freedom (DOF) capabilities. Unlike classical RTHS for seismic applications, which typically relies on displacement control, hydro-RTHS requires 6-DOF force control on newly designed floating prototypes in a model-scale setting, which presents significant challenges, including modeling uncertainties, directional asymmetry, configuration drift, bandwidth limitations, and time-varying delays. To mitigate these constraints without extensive pre-test calibration, this study proposes an adaptive model-free robotic force control strategy that combines task-space explicit force control with a secondary joint-space pose-keeping task. The Adaptive Feedforward Compensator (AFC) is integrated into the force control loop to compensate for time-varying delay. Experimental testing was conducted using a Franka Emika Panda robotic arm with a 1:50 scale FOWT specimen under operational wind and wave conditions. Results demonstrate stable and consistent 6-DOF force tracking. Effective delay compensation was observed, with low-frequency delay reductions ranging from 71.4% to 91.8% and improvements in low-frequency surge force tracking of 25.0% to 52.1%. This study enhances robotic actuation performance in hydro-RTHS and introduces a force control strategy that supports reliable robotic operation in uncertain floating environments. Future work will explore disturbance-observer mechanisms to further enhance wave rejection capabilities under extreme wind and wave conditions.

17 WIND ENERGY↗