Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observer mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Saturn Ring Seismology: Interpreting the Seismogram

Marley (1990) and Marley and Porco (1993) proposed that f-mode oscillations of Saturn could excite resonant density and bending waves in the inner C-ring. They hypothesized that certain wave features discovered by Rosen et al. (1991) that were not associated with known satellite resonances could be the result of such resonant interactions with the planetary oscillation modes. They also predicted that if this was the case the waves would be found to be density (and not bending) waves by Cassini and predicted the azimuthal wave number of the C-ring waves m. Employing Cassini VIMS stellar occultation data Hedman and Nicholson (2013) have now confirmed the predictions and demonstrated that at least some of the C-ring features identified by Rosen et al. are indeed likely caused by resonant oscillation modes of Saturn. Given this context we have taken a fresh look at the Saturn ring seismology. First we propose that an apparent bending wave denoted 'j' by Rosen may be a second order outer vertical resonance with the l=3, m=2 f-mode of Saturn and discuss the locations of other plausible second order resonances in the rings. Since only a handful of ring resonances have been identified, measuring even one or two additional planetary mode frequencies would substantially assist the process of inverting mode frequencies to constrain Saturn interior's structure. Using the available mode frequencies, modern inversion technique employed in stellar seismology, and a recent set of Saturn interior models we provide an initial estimation of what available mode frequencies are telling us about the interior structure of the planet. Since the f-modes are confined relatively closely to the planetary surface, most of the observed modes probe only the outermost layers of the planet that are already comparatively well understood. However the l = 2 mode does probe relatively deeply into the planet and we will discuss the potential the measurement of this mode frequency has for placing new constraints on the interior structure.

Seismogram↗

X-Ray and Near-Infrared Observations of the Middle-aged Pulsar B1055-52, Its Multiwavelength Spectrum, and Proper Motion

Previous observations of the middle-aged γ-ray, X-ray, and radio pulsar B1055–52 indicated some peculiarities, such as a suspected changing of the X-ray flux and spectral parameters, a large excess of the alleged thermal component of the UV spectrum over the Rayleigh–Jeans extension of the X-ray thermal spectrum, and a possible double break in the nonthermal spectral component between the optical and X-ray bands. We observed PSR B1055–52 with the XMM-Newton observatory in X-rays and the Hubble Space Telescope in near-infrared (NIR). The analysis of the XMM-Newton observations does not support the notion of long-term changes in the X-ray flux and broadband X-ray spectrum of the pulsar. Using an observing mode less affected by background noise than the previous XMM-Newton observations, we constrain the power-law (PL) spectral index as X 0.57 0.25 0.26 a = - - + (Fν ∝ ν α ) in the energy band 3–10 keV. From the NIR–optical data we obtain a PL slope αO = −0.24 ± 0.10 for the color index E(B − V ) = 0.03 mag. The slopes and fluxes of the NIR–optical and X-ray nonthermal spectra suggest that the NIR through X-ray emission can be described by the same PL and is generated by the same mechanism, unlike the pulsar’s γ-ray emission. The excess of the UV thermal component over the extension of the X-ray thermal component became smaller but did not disappear, indicating a nonuniformity of the bulk surface temperature. The NIR data also enable us to measure the proper motion accurately, with values μα = 47.5 ± 0.7 mas yr−1 and μδ = −8.7 ± 0.7 mas yr−1 .

B Posselt↗

Observation of Reversed Shear Alfven Eigenmodes between Sawtooth Crashes in the Alcator C-Mod Tokamak

Groups of frequency chirping modes observed between sawtooth crashes in the Alcator C-Mod tokamak are interpreted as reversed shear Alfven eigenmodes near the q=1 surface. These modes indicate that a reversed shear q profile is generated during the relaxation phase of the sawtooth cycle. Two important parameters, q{sub min} and its radial position, are deduced from comparisons of measured density fluctuations with calculations from the ideal MHD code NOVA. These studies provide valuable constraints for further modeling of the sawtooth cycle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotope tracer investigation and ab-initio simulation of anisotropic hydrogen transport and possible multi-hydrogen centers in tin dioxide

Hydrogen as an impurity in single crystals of tin dioxide was investigated through diffusivity and vibrational-mode analyses performed using isotope tracers and density functional theory calculations. It was found that hydrogen diffusion along the 〈001〉 axis is very fast, even at relatively low temperatures (400 °C), but is considerably slower within the (001) plane. Using transitional state calculations, this diffusion behavior was determined to be the result of anisotropy in the migration barrier for interstitial hydrogen (H{sub i}). In addition, the two distinct vibrational modes observed in the optical spectrum were identified as the O-H stretching modes of Hi and the substitutional hydrogen at the tin sites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous-wave GaAs/AlGaAs quantum cascade laser at 5.7 THz

Design strategies for improving terahertz (THz) quantum cascade lasers (QCLs) in the 5–6 THz range are investigated numerically and experimentally, with the goal of overcoming the degradation in performance that occurs as the laser frequency approaches the Reststrahlen band. Two designs aimed at 5.4 THz were selected: one optimized for lower power dissipation and one optimized for better temperature performance. The active regions exhibited broadband gain, with the strongest modes lasing in the 5.3–5.6 THz range, but with other various modes observed ranging from 4.76 to 6.03 THz. Pulsed and continuous-wave (cw) operation is observed up to temperatures of 117 K and 68 K, respectively. In cw mode, the ridge laser has modes up to 5.71 THz – the highest reported frequency for a THz QCL in cw mode. The waveguide loss associated with the doped contact layers and metallization is identified as a critical limitation to performance above 5 THz.

47 OTHER INSTRUMENTATION↗

Low-frequency shear Alfvén waves at DIII-D: Theoretical interpretation of experimental observations

The linear properties of the low-frequency shear Alfvén waves such as those associated with the beta-induced Alfvén eigenmodes (BAEs) and the low-frequency modes observed in reversed-magnetic-shear DIII-D discharges [W. Heidbrink et al., Nucl. Fusion 61, 066031 (2021)] are theoretically investigated and delineated based on the theoretical framework of the general fishbone-like dispersion relation (GFLDR). By adopting representative experimental equilibrium profiles, it is found that, even though both modes are predominantly of Alfvénic polarization, the low-frequency mode is a reactive unstable mode with weak coupling to the energetic particles, while the BAE involves a dissipative instability due to resonant excitation by the energetic ions. Thus, the low-frequency mode is more appropriately called a low-frequency Alfvén mode (LFAM). Moreover, the ascending frequency spectrum patterns of the experimentally observed BAEs and LFAMs can be theoretically reproduced by varying qmin and also be well interpreted based on the GFLDR. The present analysis illustrates the solid predictive capability of the GFLDR and its practical usefulness in enhancing the interpretative capability of both experimental and numerical simulation results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

VERITAS detection of γ-ray flaring activity from the BL LAC object 1ES 1727+502 during bright moonlight observations

During moonlit nights, observations with ground-based Cherenkov telescopes at very high energies (VHEs, E>100 GeV) are constrained since the photomultiplier tubes (PMTs) in the telescope camera are extremely sensitive to the background moonlight. Observations with the VERITAS telescopes in the standard configuration are performed only with a moon illumination less than 35% of full moon. Since 2012, the VERITAS collaboration has implemented a new observing mode under bright moonlight, by either reducing the voltage applied to the PMTs (reduced-high-voltage; RHV configuration), or by utilizing UV-transparent filters. While these operating modes result in lower sensitivity and increased energy thresholds, the extension of the available observing time is useful for monitoring variable sources such as blazars and sources requiring spectral measurements at the highest energies. In this paper we report the detection of γ-ray flaring activity from the BL Lac object 1ES 1727+502 during RHV observations. This detection represents the first evidence of VHE variability from this blazar. The integral flux is (1.1±0.2)×10{sup −11} cm{sup −2} s{sup −1} above 250 GeV, which is about five times higher than the low-flux state. The detection triggered additional VERITAS observations during standard dark-time. Multiwavelength observations with the FLWO 48″ telescope, and the Swift and Fermi satellites are presented and used to produce the first spectral energy distribution (SED) of this object during γ-ray flaring activity. The SED is then fitted with a standard synchrotron-self-Compton model, placing constraints on the properties of the emitting region and of the acceleration mechanism at the origin of the relativistic particle population in the jet.

79 ASTRONOMY AND ASTROPHYSICS↗

The Stability of the Low Degree 5 Minute Solar Oscillations

The decay rate for many of the low degree p modes observed as 5 minute oscillations of the Sun is discussed and decay rates for modes ranging from radial (l=0) to the nonradial ones with l=5 for overtones 10 through 28. Parameters needed for he solar model are given and the hydrogen mass fraction composition structure is shown as well as the structure given by Christensen-Dalsgaard (1982) for an evolved solar model. The special equation of state and opacity table with X=0.74 for the hydrogen mass fraction in the outer 0.40 of the mass needs slightly more hydrogen in the central regions than obtained by Christensen-Dalsgaard in order to give a complete and consistent model. The difference in helium production between these two models is about 10%, meaning that the total energy radiated by the Sun during its lifetime thus far agrees satisfactorily with accurately calculated evolution sequences.

Kidman, R. B.↗

In-flight observations of low-mode ρR asymmetries in NIF implosions

Charged-particle spectroscopy is used to assess implosion symmetry in ignition-scale indirect-drive implosions for the first time. Surrogate D{sup 3}He gas-filled implosions at the National Ignition Facility produce energetic protons via D+{sup 3}He fusion that are used to measure the implosion areal density (ρR) at the shock-bang time. By using protons produced several hundred ps before the main compression bang, the implosion is diagnosed in-flight at a convergence ratio of 3–5 just prior to peak velocity. This isolates acceleration-phase asymmetry growth. For many surrogate implosions, proton spectrometers placed at the north pole and equator reveal significant asymmetries with amplitudes routinely ≳10%, which are interpreted as ℓ=2 Legendre modes. With significant expected growth by stagnation, it is likely that these asymmetries would degrade the final implosion performance. X-ray self-emission images at stagnation show asymmetries that are positively correlated with the observed in-flight asymmetries and comparable in magnitude, contradicting growth models; this suggests that the hot-spot shape does not reflect the stagnated shell shape or that significant residual kinetic energy exists at stagnation. More prolate implosions are observed when the laser drive is sustained (“no-coast”), implying a significant time-dependent asymmetry in peak drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultraviolet spectrometer experiment for the Voyager mission

An objective grating spectrometer covering the wavelength range of 500 to 1700 A with a 10-A resolution is employed for the Voyager ultraviolet spectrometer experiment. In determining the composition and structure of the atmospheres of Saturn, Jupiter and several satellites, the ultraviolet spectrometer will rely on airglow mode observations to measure radiation from the atmospheres due to resonant scattering of solar flux, and the occultation mode for assessments of the atmospheric extinction of solar or stellar radiation as the spacecraft enters shadow zones. Since it is capable of prolonged stellar observations in the 500 to 1000 A wavelength range, the spectrometer is expected to make important contributions to exploratory studies of UV sources.

Broadfoot, A. L.↗

Static and dynamic behavior of ultrathin cobalt nanowires embedded in transparent matrix

Two self-assembly of ultrathin Co nanowires (NWs) embedded in a CeO{sub 2} matrix was grown on SrTiO{sub 3}(001) and oxidized Si(001) substrates. A common feature of the two arrays of NWs is the small diameter of the wires, falling in the 4–5 nm range. Combined with their length, the aspect ratio is large enough to ensure large magnetostatic anisotropy with an easy axis along the axis of the nanowires as revealed by magnetometry measurements. The Brillouin light scattering technique has been used to investigate the behavior of the spin waves under a field perpendicular to the NWs axes. The transparency of the matrix ensures the penetration of the probing light inside the sample. Importantly, Brillouin light scattering from the magnetic modes obeys the volume Bragg condition, which is characteristic of the configuration in which the observed modes are propagating along the nanowires and due to their very small diameter are nearly constant across the section. Both series of experimental results are satisfactorily analyzed by means of a single analytical model, based on a mean-field approach, assuming the presence at remanence of two populations of NWs with up and down magnetizations and including the dipolar coupling between the cylinders.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An ac bridge readout for bolometric detectors

The authors have developed a bolometer readout circuit which greatly improves the low-frequency stability of bolometric detectors. The circuit uses an ac bias voltage and two matched bolometers and allows stable dc bolometer operation for integration times greater than 10 s. In astronomical applications the readout allows for qualitatively different observation modes (e.g. staring or slow-drift scanning) which are particularly well suited for space observations and for the use of arrays. In many applications the readout can increase sensitivity. The authors present noise spectra for 4He temperature bolometers with no excess noise at frequencies greater than 0.1 Hz. The measured optical responsivity of a bolometer operated with the present readout is the same as that of a bolometer operated with a conventional readout.

Rieke, F. M.↗

The Keck Interferometer Nuller: System Architecture and Laboratory Performance

The first high-dynamic-range interferometric mode planned to come on line at the Keck Observatory is mid-infrared nulling. This observational mode, which is based on the cancellation of the on-axis starlight arriving at the win Keck telescopes, will be used to examine nearby stellar systems for the presence of circumstellar exozodiacal emission. This paper describes the system level layout of the Keck Interferometer Nuller (KIN), as well as the final performance levels demonstrated in the laboratory integration and test phase at the Jet Propulsion Laboratory prior to shipment of the nuller hardware to the Keck Observatory in mid-June 2004. On-sky testing and observation with the mid-infrared nuller are slated to begin in August 2004.

interferometry↗

Effects of structure distortion on optical phonon properties of crystalline beta-BaTeMo{sub 2}O{sub 9}—A novel nonlinear optical material: Infrared and Raman spectra as well as first-principles calculations

The infrared dielectric property of monoclinic BaTeMo{sub 2}O{sub 9} single crystals is studied by polarized IR reflectance spectra from 20 to 1800 cm{sup −1}. Based on the modified Lorentz model, the frequencies, strengths, and dampings of TO modes as well as the orientations of the dipole momenta are determined, agreeing well with Raman spectra and results from First-principles calculation. The observed modes are visually assigned to the specific atoms' motions in the primitive cell based on the theory calculations. A large shift of the internal modes of the anion groups relative to free anion co-ordination polyhedra is observed, which can be used to indicate the distortions of co-ordination polyhedra related to the nonlinear optical properties. Further, the experimental results of the strengths of the oscillators support the elimination and splitting of degenerate modes in free regular polyhedrons. These results offer a way to evaluate the nonlinear optical properties by use of traditional IR reflectivity spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of steel type on the propensity for tribochemical wear in boundary lubrication with a wind turbine gear oil

Tribochemical wear may occur at the interface between a surface and a lubricant as a result of chemical and mechanical interactions in a tribological contact. Understanding the onset of tribochemical wear damage on component surfaces requires the use of high resolution techniques such as transmission electron microscopy (TEM). In this study, two steel types, case carburized AISI 3310 and through-hardened AISI 52100, were wear tested using a ball-on-disk rolling/sliding contact tribometer in fully formulated commercial wind turbine gearbox oil under boundary lubrication conditions with 10% slip. With the exception of steel type, all other test conditions were held constant. Conventional tribofilm analysis in the wear tracks was performed using X-ray photoelectron spectroscopy, and no significant composition differences were detected in the tribofilms for the different steel disk types. However, TEM analysis revealed significant tribochemical wear differences between the two steel types at multiple length scales, from the near-surface material microstructure (depth < 500 nm) to the tribofilm nanostructure. Nanometer-scale interfacial cracking and surface particle detachment was observed for the AISI 52100 case, whereas the tribofilm/substrate interface was abrupt and undamaged for the AISI 3310 case. Differences in tribofilm structure, including the location and orientation of MoS{sub 2} single sheet inclusions, were observed as a function of steel type as well. It is suggested that the tribochemical wear modes observed in these experiments may be origins of macroscopic surface-initiated damage such as micropitting in bearings and gears.

17 WIND ENERGY↗

Arc distribution during the vacuum arc remelting of Ti-6Al-4V

Currently, the temporal distribution of electric arcs across the ingot during vacuum arc remelting (VAR) is not a known or monitored process parameter. Previous studies indicate that the distribution of arcs can be neither diffuse nor axisymmetric about the center of the furnace. Correct accounting for the heat flux, electric current flux, and mass flux into the ingot is critical to achieving realistic solidification models of the VAR process. The National Energy Technology Laboratory has developed an arc position measurement system capable of locating arcs and determining the arc distribution within an industrial VAR furnace. The system is based on noninvasive magnetic field measurements and a VAR specific form of the Biot–Savart law. The system was installed on a coaxial industrial VAR furnace at ATI Albany Operations in Albany, OR. This article reports on the different arc distributions observed during production of Ti-6Al-4V. It is shown that several characteristic arc distribution modes can develop. This behavior is not apparent in the existing signals used to control the furnace, indicating the measurement system is providing new information. It is also shown that the different arc distribution modes observed may impact local solidification times, particularly at the side wall.

36 MATERIALS SCIENCE↗

Lattice vibrations and dielectric functions of ferroelectric SrBi{sub 2-x}Nd{sub x}Nb{sub 2}O{sub 9} bismuth layer-structured ceramics determined by infrared reflectance spectra

Infrared optical properties of SrBi{sub 2-x}Nd{sub x}Nb{sub 2}O{sub 9} (SBNN) ceramics with different Nd compositions (from 0 to 0.2) have been investigated by near-normal incident reflectance technique. The experimental spectra in the wavenumbers range of 350-1500 cm{sup -1} were analyzed using the Lorentz oscillator model for five infrared-active phonon mode observed. It is found that the frequencies of the NbO{sub 6} tilting and symmetric stretching modes linearly decrease with the Nd composition due to the octahedra distortion. The high-frequency dielectric constant varies in the range from 4.55 {+-} 0.04 to 4.80 {+-} 0.04. Owing to the contribution from the stronger electronic transitions, the real part of dielectric function Re({epsilon}) is estimated to about 4.0 in the high-frequency transparent region.

36 MATERIALS SCIENCE↗

CORSICA modelling of ITER hybrid operation scenarios

The hybrid operating mode observed in several tokamaks is characterized by further enhancement over the high plasma confinement (H-mode) associated with reduced magneto-hydro-dynamic (MHD) instabilities linked to a stationary flat safety factor ($q$ ) profile in the core region. The proposed ITER hybrid operation is currently aiming at operating for a long burn duration (>1000 s) with a moderate fusion power multiplication factor, $Q$ , of at least 5. This paper presents here candidate ITER hybrid operation scenarios developed using a free-boundary transport modelling code, CORSICA, taking all relevant physics and engineering constraints into account. The ITER hybrid operation scenarios have been developed by tailoring the 15 MA baseline ITER inductive H-mode scenario. Accessible operation conditions for ITER hybrid operation and achievable range of plasma parameters have been investigated considering uncertainties on the plasma confinement and transport. ITER operation capability for avoiding the poloidal field coil current, field and force limits has been examined by applying different current ramp rates, flat-top plasma currents and densities, and pre-magnetization of the poloidal field coils. Various combinations of heating and current drive (H&CD) schemes have been applied to study several physics issues, such as the plasma current density profile tailoring, enhancement of the plasma energy confinement and fusion power generation. A parameterized edge pedestal model based on EPED1 added to the CORSICA code has been applied to hybrid operation scenarios. Finally, fully self-consistent free-boundary transport simulations have been performed to provide information on the poloidal field coil voltage demands and to study the controllability with the ITER controllers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗