SEARCH · Engineering Papers

Results for “nonlinear correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Scaling up the transcorrelated density matrix renormalization group

Explicitly correlated methods, such as the transcorrelated method which shifts a Jastrow or Gutzwiller correlator from the wave function to the Hamiltonian, are designed for high-accuracy calculations of electronic structures, but their application to larger systems has been hampered by the computational cost. We develop improved techniques for the transcorrelated density-matrix renormalization group (DMRG), in which the ground state of the transcorrelated Hamiltonian is represented as a matrix product state (MPS), and demonstrate large-scale calculations of the ground-state energy of the two-dimensional Fermi-Hubbard model. Our developments stem from three technical inventions: (i) constructing matrix product operators (MPOs) of transcorrelated Hamiltonians with low bond dimension and high sparsity, (ii) exploiting the entanglement structure of the ground states to increase the accuracy of the MPS representation, and (iii) optimizing the nonlinear parameter of the Gutzwiller correlator to mitigate the nonvariational nature of the transcorrelated method. Here, we examine systems of size up to 12×12 lattice sites, four times larger than previous transcorrelated DMRG studies, and demonstrate that transcorrelated DMRG yields significant improvements over standard nontranscorrelated DMRG for equivalent computational effort. Transcorrelated DMRG reduces the error of the ground-state energy by 2.4×–14×, with the smallest improvement seen for a small system at half filling and the largest improvement in a dilute closed-shell system.

Density matrix renormalization group↗

NASA NTRS1991

Detailed analysis and test correlation of a stiffened composite wing panel

Nonlinear finite element analysis techniques are evaluated by applying them to a realistic aircraft structural component. A wing panel from the V-22 tiltrotor aircraft is chosen because it is a typical modern aircraft structural component for which there is experimental data for comparison of results. From blueprints and drawings supplied by the Bell Helicopter Textron Corporation, a very detailed finite element model containing 2284 9-node Assumed Natural-Coordinate Strain (ANS) elements was generated. A novel solution strategy which accounts for geometric nonlinearity through the use of corotating element reference frames and nonlinear strain displacements relations is used to analyze this detailed model. Results from linear analyses using the same finite element model are presented in order to illustrate the advantages and costs of the nonlinear analysis as compared with the more traditional linear analysis. Strain predictions from both the linear and nonlinear stress analyses are shown to compare well with experimental data up through the Design Ultimate Load (DUL) of the panel. However, due to the extreme nonlinear response of the panel, the linear analysis was not accurate at loads above the DUL. The nonlinear analysis more accurately predicted the strain at high values of applied load, and even predicted complicated nonlinear response characteristics, such as load reversals, at the observed failure load of the test panel. In order to understand the failure mechanism of the panel, buckling and first ply failure analyses were performed. The buckling load was 17 percent above the observed failure load while first ply failure analyses indicated significant material damage at and below the observed failure load.

Davis, D. Dale, Jr.↗

DOE OSTI2022

Accurate parameterization of the kinetic energy functional for calculations using exact-exchange

In this report, electronic structure calculations based on Kohn-Sham density functional theory (KSDFT) that incorporate exact exchange or hybrid functionals are associated with large computational expense, a consequence of the inherent cubic scaling bottleneck and large associated prefactor, which limits the length and time scales that can be accessed. Though orbital-free density functional theory (OFDFT) calculations scale linearly with system size and are associated with significantly smaller prefactor, they are limited by the absence of accurate density-dependent kinetic energy functionals. Therefore, the development of accurate density-dependent kinetic energy functionals is important for OFDFT calculations of large realistic systems. To this end, we propose a method to train kinetic energy functional models at the exact-exchange level of theory by using a dictionary of physically relevant terms that have been proposed in the literature in conjunction with linear or nonlinear regression methods to obtain the fitting coefficients. For our dictionary, we use gradient expansion of the kinetic energy, nonlocal models proposed in the literature and their nonlinear combinations, such as a model that incorporates spatial correlations between higher order derivatives of electron density at two points. The predictive capabilities of these models are assessed by using a variety of model one-dimensional systems that exhibit diverse bonding characteristics, such as a chain of eight hydrogens, LiF, LiH, C 4 H 2 , C 4 N 2 and C 3 O 2 . We show that by using data from model one-dimensional KSDFT calculations performed using the exact-exchange functional for only a few neutral structures, it is possible to generate models with high accuracy for charged systems as well as electron and kinetic energy densities during self-consistent field iterations. In addition, we show that it possible to learn both the orbital dependent terms, i.e., the kinetic energy and the exact-exchange energy, and models that incorporate additional nonlinearities in spatial correlations, such as a quadratic model, are needed to capture subtle features of the kinetic energy density that are present in exact-exchange-based KSDFT calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Continental-Scale Geographic Trends in Barometric-Pumping Efficiency Potential: A North American Case Study

Barometric pumping is a gas transport mechanism that has important implications for many applications involving subsurface gas seepage processes. Here, this study provides the first continental-scale analysis of barometric-pumping efficiency potential based on meteorology. We quantified the barometric-pumping efficiency potential at 1,257 locations across the continental US and Canada. The results provide continental-scale geographic dependencies of barometric-pumping efficiency potential, indicating a significant correlation with latitude and a nonlinear dependence on longitude. The analysis also indicates that variability in barometric-pumping efficiency potential decreases with distance from the coast and as elevation increases. Locations far from the coastline are more likely to have upper mid-range potentials, while higher elevation locations are more likely to have low potentials. The highest barometric-pumping efficiency potentials are mostly found around the Gulf of St. Lawrence around 50°N. Locations along the Atlantic coast exhibit large-scale variations in potentials with a clear increasing trend with latitude.

58 GEOSCIENCES↗

DOE OSTI2026

On how avalanches penetrate the SOL and broaden heat loads

Recent experiments reported a correlation between power law core temperature spectra and Dα emission, suggesting that heat avalanches penetrate the SOL. This paper derives a threshold criterion for avalanche penetration using a reduced model. Avalanches with ($\bigtriangledown$$\tilde{T}$) rms > $\bigtriangledown$$\tilde{T}$ crit at the separatrix are predicted to penetrate, and so broaden the SOL and heat load distribution. $\bigtriangledown$$\tilde{T}$ crit is ~ 1/$τ$ ∥ , where $τ$ ∥ is the parallel heat flow time through the SOL. Penetration occurs when avalanches are strong enough to steepen sufficiently to shock at the separatrix. A positive correlation is found between the nonlinear drive for steepening and the penetration depth. In particular, penetration depth exceeds that of the heuristic drift limit when shocks form. Implications for numerical and physical experiments are also discussed.

SOL heat load↗

DOE OSTI2022

Worldwide Physics-Based Lifetime Prediction of c-Si Modules Due to Solder-Bond Failure

Lifetime prediction of the fielded c-Si solar modules due to location-specific weather conditions has been an important topic of photovoltaic research and the economic viability of solar energy. Data analytic techniques such as the performance ratio method, Statistical clear sky model, and Suns-Vmp methods quantify the degradation from measured data of a solar farm, however, the nonlinear time-dependence and correlated degradations make it difficult to use the empirical degradation rates for ultimate lifetime projection. In this article, we propose a complementary physics-based model to predict the solder bond failure caused by mechanical stress associated with the variations of the temperature. Integrating the worldwide weather information from NASA/NSRDB databases, the model predicts the location-specific output-power degradation and the lifetime of a module due to solder bond failure. The model parameters are calibrated against qualification tests involving thermal cycling of specific batches of modules from a specific technology/manufacturer. The results may be summarized as: 1) Modules installed at higher latitudes show a longer lifetime due to reduced damage accumulation. 2) The reduction of temperature fluctuation close to large bodies of water, such as seashores, increases solder bond lifetime significantly. 3) Relatively speaking, modules installed close to the Tropic of Cancer/Capricorn (23.5 degrees North/South) suffer from a higher solder bond damage and have a shorter lifetime, suggesting a conservative design. This model should serve as a building block of a comprehensive reliability framework that can predict the lifetime of a module that experiences simultaneous and correlated degradation mechanisms involving yellowing, corrosion, and potential-induced degradation.

14 SOLAR ENERGY↗

DOE OSTI2024

An Empirical Model For Intrinsic Alignments: Insights From Cosmological Simulations

We extend current models of the halo occupation distribution (HOD) to include a flexible, empirical framework for the forward modeling of the intrinsic alignment (IA) of galaxies. A primary goal of this work is to produce mock galaxy catalogs for the purpose of validating existing models and methods for the mitigation of IA in weak lensing measurements. This technique can also be used to produce new, simulation-based predictions for IA and galaxy clustering. Our model is probabilistically formulated, and rests upon the assumption that the orientations of galaxies exhibit a correlation with their host dark matter (sub)halo orientation or with their position within the halo. We examine the necessary components and phenomenology of such a model by considering the alignments between (sub)halos in a cosmological dark matter only simulation. We then validate this model for a realistic galaxy population in a set of simulations in the Illustris-TNG suite. We create an HOD mock with Illustris-like correlations using our method, constraining the associated IA model parameters, with the $\mathcal{X}$$^{2}_{dof}$ between our model’s correlations and those of Illustris matching as closely as 1.4 and 1.1 for orientation–position and orientation–orientation correlation functions, respectively. By modeling the misalignment between galaxies and their host halo, we show that the 3-dimensional two-point position and orientation correlation functions of simulated (sub)halos and galaxies can be accurately reproduced from quasi-linear scales down to 0.1 $\mathcal{h}$ –1 Mpc. We also find evidence for environmental influence on IA within a halo. Our publicly-available software provides a key component enabling efficient determination of Bayesian posteriors on IA model parameters using observational measurements of galaxy-orientation correlation functions in the highly nonlinear regime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Advanced Geomechanical Model to Predict the Impact of CO2-Induced Microstructural Alterations on the Cohesive-Frictional Behavior of Mt. Simon Sandstone

We investigated the influence of CO2-induced geochemical reactions on the cohesive-frictional properties of host rock within the context of CO2 storage in a saline aquifer and focused on the Mt. Simon sandstone. The research objective was to model geo-mechanical changes due to host rock exposure to CO2-saturated brine while accounting for heterogeneity, double-scale porosity, and granular structure. We formulated a three-level multi-scale model for host rocks. We conducted scanning electron microscopy analyses to probe the microstructure and grid nanoindentation to measure the mechanical response. We derived new nonlinear strength upscaling solutions to correlate the effective strength characteristics and the macroscopic yield surface to the micro-structure at the nano-, micro-, and meso-scales. Specifically, our theoretical model links CO2-induced microstructural alterations to a reduction in the size of the yield surface, and a drop in the value of the friction coefficient. In turn, regarding the Illinois Basin Decatur Project, the CO2-induced drop in friction coefficient is linked to an increase in the risk of fault slip and a higher probability of induced microseismicity during and after the end of CO2 underground injection operations. The theoretical model presented is essential for the geo-mechanical modeling of CO2 underground injection operations at multiple length-scales.

58 GEOSCIENCES↗

NASA NTRS1983

Constant-temperature hot-wire anemometer practice in supersonic flows. I - The normal wire

The performance of a constant-temperature normal hot-wire in a supersonic flow is critically examined. It is shown that this instrument is inherently unsuitable for measuring turbulent temperature correlations because of the highly nonlinear response to temperature fluctuations, particularly at low overheat ratios. The instrument is therefore limited to measurements of mean and fluctuating mass-flow rates. Suitable calibration procedures, as well as the limits on spatial and temporal resolution are discussed, and corrections for mean stagnation temperature changes are suggested.

Smits, A. J.↗

NASA NTRS1999

Evaluation of a Scaling Approach for Stiffened Composite Flat Panels Loaded in Compression

Results of an experimental study of the effects of geometric scaling on a graphite-epoxy flat stiffened-skin panel concept loaded in compression are presented. The scaled models were fabricated using an approach to laminate thickness scaling, referred to as the "ply-thickness method." The structural response and failure characteristics of full-, half-, and quarter-scale specimens fabricated with this scaling concept are discussed and compared. The scaled up failure loads of the half- and quarter-scale models agree well with the failure load of the full-scale prototypes tested. The strength scale effects observed in the results were substantially smaller than those in earlier studies that employed other laminate scaling techniques. The experimental results indicate that failure initiated by crippling and delamination in the cap of the longitudinal stiffeners and skin-stiffener separation at the bond-lines, and was followed by failure of the specimen skin. Nonlinear finite element analysis results correlate well with experimental results up to failure.

Rouse, Marshall↗

NASA NTRS2003

Structural Stability of a Stiffened Aluminum Fuselage Panel Subjected to Combined Mechanical and Internal Pressure Loads

Results from an experimental and analytical study of a curved stiffened aluminum panel subjected to combined mechanical and internal pressure loads are presented. The panel loading conditions were simulated using a D-box test fixture. Analytical buckling load results calculated from a finite element analysis are presented and compared to experimental results. Buckling results presented indicate that the buckling load of the fuselage panel is significantly influenced by internal pressure loading. The experimental results suggest that the stress distribution is uniform in the panel prior to buckling. Nonlinear finite element analysis results correlates well with experimental results up to buckling.

Rouse, Marshall↗

NASA NTRS2019

Predictability of Ocean Heat Content From Electrical Conductance

Ocean heat content (OHC) is a key climate variable that needs to be monitored to know how Earth's energy imbalance is changing, yet observing OHC remains a challenge. The present study examines whether a depth integral of the ocean's electrical conductivity (“conductance”), which may be inferred from both in situ methods and satellite magnetometers over the global ocean, could help monitor OHC. The ocean's electrical conductivity locally depends on temperature, salinity, and pressure, but it is not as well known how the conductance depends on OHC and ocean salt content. By examining the output of an ocean state estimate shown to agree well with observations that have not been assimilated, this study evaluates the fundamental limitations of using perfectly known ocean conductance to predict OHC, rather than the challenges associated with accounting for observational error. It is found that the ocean's conductance and OHC fields are nonlinearly related but nevertheless highly correlated. A statistical framework tends to predict OHC more accurately than ocean salt content from ocean conductance in regions where conductivity is more sensitive to salinity than temperature. The annually (bidecadally) averaged OHC can be predicted from a combination of conductance and depth‐averaged conductivity ocean fields to within nearly 0.1% (1%) error globally and even more accurately in many poorly observed (e.g., ice‐covered) regions. Practical application of this statistical framework to monitor OHC requires examination of the effect of uncertainties in the observed bathymetry and ocean conductance, which vary with application.

Trossman, D. S.↗

NASA NTRS1990

Nonlinear damping model for flexible structures

The study of nonlinear damping problem of flexible structures is addressed. Both passive and active damping, both finite dimensional and infinite dimensional models are studied. In the first part, the spectral density and the correlation function of a single DOF nonlinear damping model is investigated. A formula for the spectral density is established with O(Gamma(sub 2)) accuracy based upon Fokker-Planck technique and perturbation. The spectral density depends upon certain first order statistics which could be obtained if the stationary density is known. A method is proposed to find the approximate stationary density explicitly. In the second part, the spectral density of a multi-DOF nonlinear damping model is investigated. In the third part, energy type nonlinear damping model in an infinite dimensional setting is studied.

Zang, Weijian↗

NASA NTRS2003

Using Correlated Photons to Suppress Background Noise

A proposed method of suppressing the effect of background noise in an optical communication system would exploit the transmission and reception of correlated photons at the receiver. The method would not afford any advantage in a system in which performance is limited by shot noise. However, if the performance of the system is limited by background noise (e.g., sunlight in the case of a free-space optical communication system or incoherently scattered in-band photons in the case of a fiber-optic communication system), then the proposed method could offer an advantage: the proposed method would make it possible to achieve a signal-to-noise ratio (S/N) significantly greater than that of an otherwise equivalent background- noise-limited optical communication system based on the classical transmission and reception of uncorrelated photons. The figure schematically depicts a classical optical-communication system and a system according to the proposed method. In the classical system, a modulated laser beam is transmitted along an optical path to a receiver, the optics of which include a narrow-band-pass filter that suppresses some of the background noise. A photodetector in the receiver detects the laser-beam and background photons, most or all of which are uncorrelated. In the proposed system, correlated photons would be generated at the transmitter by making a modulated laser beam pass through a nonlinear parametric down-conversion crystal. The sum of frequencies of the correlated photons in each pair would equal the frequency of the incident photon from which they were generated. As in the classical system, the correlated photons would travel along an optical path to a receiver, where they would be band-pass filtered and detected. Unlike in the classical system, the photodetector in the receiver in this system would be one that intrinsically favors the detection of pairs of correlated photons over the detection of uncorrelated photons. Even though there would be no way of knowing the precise location and time of creation of a given pair of correlated signal photons in the nonlinear down-conversion crystal, the fact that the photons are necessarily created at the same time and place makes it possible to utilize conventional geometrical imaging optics to reunite the photons in coincidence in the receiving photodetector. Because most or all of the signal photons would be correlated while most or all of the noise photons would be uncorrelated, the S/N would be correspondingly enhanced in the photodetector output. An additional advantage to be gained by use of a correlated-photon detector is that it could be capable of recovering the signal even in the presence of background light so bright that a classical uncorrelated-photon detector would be saturated. A blocked-impurity-band (BIB) photodetector that preferentially detects pairs of correlated photons over uncorrelated ones and that operates at a quantum efficiency of 88 percent is commercially available. This detector must be cooled to the temperature of liquid helium to obtain the desired low-noise performance. It is planned to use this detector in a proof-of-principle demonstration. In addition, it may be possible to develop GaN-based photodetectors that could offer the desired low-noise performance at room temperature.

Jackson, Deborah↗

DOE OSTI2022

Visualization and quantum control of light-accelerated condensates by terahertz multi-dimensional coherent spectroscopy

Abstract Characterizing and controlling high-order correlation of quantum systems is key for developing quantum devices and switching technologies. Although conventional static and ultrafast spectroscopy gives access to collective excitations characterizing quantum states, more exotic correlations cannot be easily separated from other contributions. Here we develop density matrix simulations to show that seventh-order-wave-mixing peaks with distinct temperature and field dependences in two-dimensional terahertz nonlinear spectra reveal light-induced correlations in non-equilibrium superconducting states. Above critical terahertz driving, these emerging peaks split from conventional peaks along the second axis introduced by pump-probe relative phase in two-dimensional frequency space. They are photo-generated by correlations between two-photon fluctuations and interacting quasi-particle and quasi-particle/Higgs superconductor excitations. By photo-inducing persistent symmetry breaking via light-wave propagation, we also demonstrate seventh-order-wave-mixing sensing of Higgs collective modes. Our theory suggests to use multi-dimensional spectroscopy for quantum sensing of light-driven superconductivity and paves a path for quantum operations by few-cycle-THz-periodic photocurrent modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1980

A modified Barrett-Lampard expansion and its application to bandpass nonlinearities with both AM-AM and AM-PM conversion

A two-dimensional Barrett-Lampard expansion is developed to handle two-dimensional nonlinear systems with random Gaussian inputs. The theory is applied to the problem of evaluating the mean signal and the inphase and quadrature noise correlation functions at the output of a TWT nonlinearity exhibiting arbitrary AM-AM and AM-PM characteristics, when the input consists of a narrow-band signal and Gaussian noise. As a specialized application, the classical problem of determining the coherent and incoherent noise correlation functions at the output of a power-law bandpass nonlinearity is also considered. The results are of interest in assessing the performance of coherent satellite communication channels. The theory developed is accompanied by numerical examples of practical interest.

Chie, C. M.↗

DOE OSTI2020

Encoding the complete electric field of an ultraviolet ultrashort laser pulse in a near-infrared nonlinear-optical signal

We introduce a variation on the cross-correlation frequency-resolved optical gating (XFROG) technique that uses a near-infrared (NIR) nonlinear-optical signal to characterize pulses in the ultraviolet (UV). Using a transient-grating XFROG beam geometry, we create a grating using two copies of the unknown UV pulse and diffract a NIR reference pulse from it. We show that, by varying the delay between the UV pulses creating the grating, the UV pulse intensity-and-phase information can be encoded into a NIR signal. We also implemented a modified generalized-projections phase-retrieval algorithm for retrieving the UV pulses from these spectrograms. We performed proof-of-principle measurements of chirped pulses and double pulses, all at 400 nm. This approach should be extendable deeper into the UV and potentially even into the extreme UV or x-ray range.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Nuclear Data Adjustment for Nonlinear Applications in the OECD/NEA WPNCS SG14 Benchmark -- A Bayesian Inverse UQ-based Approach for Data Assimilation

The Organization for Economic Cooperation and Development (OECD) Working Party on Nuclear Criticality Safety (WPNCS) proposed a benchmark exercise to assess the performance of current nuclear data adjustment techniques applied to nonlinear applications and experiments with low correlation to applications. This work introduces Bayesian Inverse Uncertainty Quantification (IUQ) as a method for nuclear data adjustments in this benchmark, and compares IUQ to the more traditional methods of Generalized Linear Least Squares (GLLS) and Monte Carlo Bayes (MOCABA). Posterior predictions from IUQ showed agreement with GLLS and MOCABA for linear applications. When comparing GLLS, MOCABA, and IUQ posterior predictions to computed model responses using adjusted parameters, we observe that GLLS predictions fail to replicate computed response distributions for nonlinear applications, while MOCABA shows near agreement, and IUQ uses computed model responses directly. We also discuss observations on why experiments with low correlation to applications can be informative to nuclear data adjustments and identify some properties useful in selecting experiments for inclusion in nuclear data adjustment. Performance in this benchmark indicates potential for Bayesian IUQ in nuclear data adjustments.

FOS: Computer and information sciences↗