Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanostructure stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tailoring Charge Transport and Magnetism in Complex Half-Heusler/Full-Heusler Nanocomposites (Final Report)

This project exploits (1) the facile co-crystallization of the half-Heusler (HH) and full-Heusler (FH) structures, (2) the high coherency and stability of the HH/FH interfaces, and (3) the solid-state inter-conversion between HH and FH structures through local atomic diffusion, to investigate, for selected compositions of the HH and FH phases, the effect of size, dimensionality, dispersion and volume fraction of FH nanostructures on the electronic, phonon and magnetic behavior of the resulting HH/FH nanocomposites. Our goal is to identify and control key material and growth parameters governing phase formation, microstructural evolution, and to understand the mechanism by which these changes of the internal structure modify the material’s performance. To elucidate the mechanism by which the FH nanostructures regulate electronic charge transport and induce ferromagnetism within non-magnetic and magnetic semiconducting HH matrices, suitable series of HH/0D-FH and HH/2D-FH nanocomposites will be fabricated using synthesis conditions suggested by theoretical calculations of the formation energy and stability of various FH phases (varying M) in HH matrices with known chemical composition. The structure of the HH/FH interfaces (size, chemical composition, volume fraction and dispersion) will be investigated along with the evaluation of the electronic (carrier density, mobility, thermopower, electrical conductivity, effective mass), thermal and magnetic (susceptibility, magnetization etc.) properties of the resulting HH/FH nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Microphase Separation of Randomly Linked Branched Polystyrene/Polylactic Acid for Formation of Cocontinuous Nanostructures

Cocontinuous polymeric nanomaterials have gained attention for their ability to preserve distinct properties of constituent microphases within a single material. Randomly linked copolymer networks have shown very wide stability windows for disordered cocontinuous phases (extending over ≈ 30 wt % in composition), but the reliance on a network architecture prevents subsequent solution- or melt-processing. Furthermore, the key factors contributing to cocontinuity have remained unclear. We recently found that randomly linked star copolymers (RSCs) can exhibit a cocontinuous window as wide as 25 wt % in the case of 4-arm stars, suggesting that while a network architecture is not essential for the formation of disordered cocontinuous phases, the presence of random elastic forces in such architectures may indeed facilitate their formation. In addition, the behavior was found to be highly sensitive to arm number, with 6-arm RSCs exhibiting almost no cocontinuous phase. These results raised a key mechanistic question regarding the contribution of random elastic forces, originating from strands that bridge between junctions, in stabilizing disordered cocontinuous phases. In the current study, we synthesized randomly linked branched copolymers (RBCs) of polystyrene (PS) and poly(D,L-lactic acid) (PLA), which represent an intermediate architecture between networks and stars. This approach allows for the introduction of elastic contributions from strands bridging between different junctions, while still maintaining the processability advantages of a non-network architecture. The cocontinuous regions of the PS/PLA RBCs, with varying polymer and linker functionalities (f p and f l , respectively), were characterized by small-angle X-ray scattering, gravimetry, and scanning electron microscopy. We found that the cocontinuous windows of RBCs typically expanded with increasing elastic contributions and exhibited reduced sensitivity to junction-functionality compared to RSCs. Notably, RBCs with f p = 1.50 and f l = 3, which had large molecular weights due to proximity to the gel point, achieved a cocontinuous window of ≈ 34 wt %, which is almost twice as wide as analogous 3-arm RSCs and comparable to randomly linked networks. Leveraging this robust cocontinuity and solution-processability, we fabricated a film of interconnected nanoporous PS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

MX precipitate behavior in an irradiated advanced Fe-9Cr steel: Helium effects on phase stability

As part of an ongoing series aimed at optimizing Fe-9Cr reduced activation ferritic/martensitic (RAFM) alloys for fusion energy systems, this study explores MX precipitate behavior under dual-ion irradiations, specifically examining correlations between helium transmutation and irradiation-induced damage. Utilizing single and dual-beam ion irradiation, the research explores the combined effects of helium (10–25 appm He/dpa), temperature (400–600 °C), and damage levels (15–100 dpa) on the microstructural evolution of CNA9 steel, a variant of Castable Nanostructured Alloys (CNAs). The study demonstrates that helium co-implantation hinders radiation-enhanced coarsening of MX-TiC precipitates at 500 and 600 °C, maintaining MX-TiC precipitate stability at moderate damage levels (15 dpa) but failing to prevent complete precipitate dissolution at higher damage levels (≥50 dpa) when irradiated at 500 °C. Here, a generalized precipitate stability model suggests that helium-induced suppression of diffusion alters the balance between recoil resolution and back diffusion for MX-TiC precipitates, enhancing the current understanding of precipitate behavior under damage and transmutation simulated dual-ion irradiation conditions.

Characterization↗
DOE OSTI2025

Recent Progress on Cerium Oxide‐Based Nanostructures for Energy and Environmental Applications

Cerium oxide (CeO 2 ) photo/electrocatalysts for energy storage and environmental applications have attracted considerable interest because of stable crystal structure, low toxicity/cost, superior chemical stability, stable redox (Ce 3+ /Ce 4+ ) pairs, abundant oxygen defects, and capablility for intense interaction with other materials. However, the wide bandgap and poor conductivity lower the CeO 2 photo/electrocatalytic and energy storage performances. To overcome these limitations, various modification strategies (tuning morphology, doping or loading of metal nanoparticles, and heterostructures) have been applied for the improvement of photocatalytic (removal of organic contaminants from water/wastewater and H 2 production and CO 2 reduction reactions) efficiency, electrocatalytic (hydrogen/oxygen evolution reactions and CO 2 reduction reactions), and energy storage performances (supercapacitor) of CeO 2 ‐based materials. Herein, the recent progress of CeO 2 ‐based materials for electro(photo)catalysis and energy storage applications has been discussed. The challenges and possible direction of CeO 2 ‐based materials for electro(photo)catalysis and energy storage applications have been emphasized. Furthermore, this comprehensive review is expected to advance the design of CeO 2 ‐based materials and their applications in electro(photo)catalysis and energy.

Ray, Schindra Kumar [Department of Chemistry North↗
DOE OSTI2020

Nanoscale Imaging and Control of Volatile and Non-Volatile Resistive Switching in VO 2

Control of the metal-insulator phase transition is vital for emerging neuromorphic and memristive technologies. The ability to alter the electrically driven transition between volatile and non-volatile states is particularly important for quantum-materials-based emulation of neurons and synapses. The major challenge of this implementation is to understand and control the nanoscale mechanisms behind these two fundamental switching modalities. In this study, in situ X-ray nanoimaging is used to follow the evolution of the nanostructure and disorder in the archetypal Mott insulator VO 2 during an electrically driven transition. Our findings demonstrate selective and reversible stabilization of either the insulating or metallic phases achieved by manipulating the defect concentration. This mechanism enables us to alter the local switching response between volatile and persistent regimes and demonstrates a new possibility for nanoscale control of the resistive switching in Mott materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultrafast photoinduced charge carrier dynamics of L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots coupled with gold nanoparticles

We have synthesized L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots (PQDs) and coupled them with gold nanoparticles (AuNPs). The PQDs and AuNPs, as well as their hybrid nanostructures (HNS), were characterized using UV–visible (UV–vis) and photoluminescence (PL) spectroscopy. The UV–vis spectra show absorption bands of the HNS at 503 and 520 nm, attributed mainly to PQDs and AuNPs, respectively. The PQDs show a strong excitonic PL band peaked at 513 nm from PQDs. The HR-TEM results show the formation of hybrid structures between PQDs and AuNPs, which is also supported by the PL quenching of the PQDs by the coupled AuNPs. Ultrafast dynamics of the exciton and charge carriers in the HNS and pristine PQD were studied using femtosecond transient absorption. Multiexponential fitting of the dynamic data revealed the existence of shallow and deep trap states in pristine PQDs and ultrafast electron transfer from PQDs to AuNPs in the HNS. A kinetic model was proposed to account for the key dynamic processes involved and to extract the time for electron transfer from PQDs to AuNPs in the HNS, found to be ∼2 ps. Dynamic processes in pristine PQDs are largely unchanged by HNS formation with AuNPs.

Chemistry↗
DOE OSTI2025

Curvature Induced Modifications of Chirality and Magnetic Configuration in Perpendicular Films

Designing curvature in three-dimensional (3D) magnetic nanostructures enables controlled manipulation of local energy landscapes, allowing for the modification of noncollinear spin textures relevant for next-generation spintronic devices. In this study, we experimentally investigate 3D magnetization textures in a Co/Pd multilayer film, exhibiting strong perpendicular magnetic anisotropy (PMA), deposited onto curved Cu nanowire meshes with diameters as small as 50 nm and lengths of several microns. Utilizing magnetic soft X-ray nanotomography, we achieve reconstructions of 3D magnetic domain patterns at approximately 30 nm spatial resolution. This approach provides detailed information on both the orientation and magnitude of magnetization within the film. Our results reveal that interfacial anisotropy in the Co/Pd multilayers drives the magnetization toward the local surface normal. In contrast to typical labyrinth domains observed in planar films, the presence of curved nanowires significantly alters the domain structure, with domains preferentially aligning along the nanowire axis in close proximity, while adopting random orientations farther away. We report direct experimental observation of a curvature-induced Dzyaloshinskii-Moriya interaction (DMI), which is quantified to be approximately one-third of the intrinsic DMI in Co/Pd stacks. The curvature induced DMI enhances stability of Néel-type domain walls. These experimental observations are further supported by micromagnetic simulations. Altogether, our findings demonstrate that introducing curvature into magnetic nanostructures provides a powerful strategy for tailoring complex magnetic behaviors, paving the way for the design of advanced 3D racetrack memory and neuromorphic computing devices.

Raftrey, David↗
DOE OSTI2021

Plastic deformation mechanism of calcium-silicate hydrates determined by deviatoric-stress Raman spectroscopy

Highlights: • C-(A-)S-H samples under stress were characterized at the bond and grain level. • Small angle scattering showed that 720 MPa reduced grain thickness by 30%. • In-situ Raman showed that cross-linked C-A-S-H slips along its intralayer. • However, in-situ Raman showed that C-S-H slips along the interlayer. • In-situ Raman also showed a growth in CaCO{sub 3}, indicating fracture in both samples. Creep of the cement matrix affects the structural stability of concrete. In Portland cements, the creep is largely controlled by the binding phase calcium-(aluminum-)silicate-hydrate, or C-(A-)S-H. This phase has a lamellar structure and under deviatoric stress aligns its c-axis with the principal stress. However, the limiting resistance to this reorientation is unknown at the nanocrystalline level. Small-angle X-ray scattering shows that the lamellae thickness decreases under 100's MPa deviatoric stress. Deviatoric stress Raman spectroscopy shows that there are two ways that this break-up can occur. If the material's silicate chains are cross-linked, then strain in SiO bonds does not increase above certain stresses, indicating a relaxation adjacent to the SiO bond. If the chains are not cross-linked, then the silicate chains are broken up by rastering against each other, introducing defects. These results show that the plastic deformation of C-(A-)S-H is relevant for Portland cement creep.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Gradient nanostructuring via compositional means

Nanocrystalline metals are inherently unstable against thermal and mechanical stimuli, commonly resulting in significant grain growth. Also, while these metals exhibit substantial Hall-Petch strengthening, they tend to suffer from low ductility and fracture toughness. With regard to the grain growth problem, alloying elements have been employed to stabilize the microstructure through kinetic and/or thermodynamic mechanisms. And to address the ductility challenge, spatially-graded grain size distributions have been developed to facilitate heterogeneous deformation modes: high-strength at the surface and plastic deformation in the bulk. In the present work, we combine these two strategies and present a new methodology for the fabrication of gradient nanostructured metals via compositional means. Here, we have demonstrated that annealing a compositionally stepwise Pt-Au film with a homogenous microstructure results in a film with a spatial microstructural gradient, exhibiting grains which can be twice as wide in the bulk compared to the outer surfaces. Additionally, phase-field modeling was employed for the comparison with experimental results and for further investigation of the competing mechanisms of Au diffusion and thermally induced grain growth. This fabrication method offers an alternative approach for developing the next generation of microstructurally stable gradient nanostructured films.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding Stabilization in Nanoporous Intermetallic Alloy Anodes for Li-Ion Batteries Using Operando Transmission X-ray Microscopy

Tin-based alloying anodes are exciting due to their high energy density. Unfortunately, these materials pulverize after repetitive cycling due to the large volume expansion during lithiation and delithiation; both nanostructuring and intermetallic formation can help alleviate this structural damage. Here, these ideas are combined in nanoporous antimony–tin (NP-SbSn) powders, synthesized by a simple and scalable selective-etching method. The NP-SbSn exhibits bimodal porosity that facilitates electrolyte diffusion; those void spaces, combined with the presence of two metals that alloy with lithium at different potentials, further provide a buffer against volume change. This stabilizes the structure to give NP-SbSn good cycle life (595 mAh/g after 100 cycles with 93% capacity retention). Operando transmission X-ray microscopy (TXM) showed that during cycling NP-SbSn expands by only 60% in area and then contracts back nearly to its original size with no physical disintegration. The pores shrink during lithiation as the pore walls expand into the pore space and then relax back to their initial size during delithiation with almost no degradation. Importantly, the pores remained open even in the fully lithiated state, and structures are in good physical condition after the 36th cycle. The results of this work should thus be useful for designing nanoscale structures in alloying anodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Metasurface‐Based Mueller Matrix Microscope

In conventional optical microscopes, image contrast of objects mainly results from the differences in light intensity and/or color. Muller matrix optical microscopes (MMMs), on the other hand, can provide significantly enhanced image contrast and rich information about objects by analyzing their interactions with polarized light. However, state-of-the-art MMMs are fundamentally limited by bulky and slow polarization state generators and analyzers. Here, the study demonstrates a metasurface-based MMM, i.e., Meta-MMM, which is equipped with a chip-integrated, single-shot metasurface polarization state analyzer (Meta-PSA). The Meta-MMM is featured with high-speed measurement (≈2s per Muller matrix (MM) image), superior operation stability, dual-color operation, and high measurement accuracy (measurement error 1–2%) for MM imaging. The Meta-MMM is applied to nanostructure characterization, surface morphology analysis, and discovering birefringent structures in honeybee wings. As a result, the Meta-MMMs hold the promise to revolutionize various applications from biological imaging, medical diagnosis, and material characterization to industry inspection and space exploration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stable Thermotropic 3D and 2D Double Gyroid Nanostructures with Sub-2-nm Feature Size from Scalable Sugar–Polyolefin Conjugates

In this study, ultra-low molecular weight disaccharide–polyolefin conjugates with cellobiose, lactose and maltose head groups and atactic polypropene tails, such as 1, undergo a series of irreversible thermotropic order–order transitions with increasing temperature to provide nanostructured phases in the sequence: lamellar (L), hexagonal perforated lamellar (HPL), double gyroid (DG) and hexagonal cylindrical (C). The DG phase displays exceptional stability at ambient temperature and features two interpenetrating sugar domain networks having a sub-2-nm strut width and a lattice parameter, a DG , of 13.1 nm. The unique stability of this DG phase extends further within ultrathin films all the way down to the two-dimensional limit of 15 nm in which film thickness, l, is now less than the surface-oriented unit cell height, h DG . In addition to raising the fundamental question of what minimally constitutes a Schoen triply periodic minimal surface and DG lattice, these results serve to establish the class of sugar–polyolefin conjugates as a new material platform for nanoscience and nanotechnology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stable Thermotropic 3D and 2D Double Gyroid Nanostructures with Sub‐2‐nm Feature Size from Scalable Sugar–Polyolefin Conjugates

Abstract Ultra‐low molecular weight disaccharide–polyolefin conjugates with cellobiose, lactose and maltose head groups and atactic polypropene tails, such as 1 , undergo a series of irreversible thermotropic order–order transitions with increasing temperature to provide nanostructured phases in the sequence: lamellar ( L ), hexagonal perforated lamellar ( HPL ), double gyroid ( DG ) and hexagonal cylindrical ( C ). The DG phase displays exceptional stability at ambient temperature and features two interpenetrating sugar domain networks having a sub‐2‐nm strut width and a lattice parameter, a DG , of 13.1 nm. The unique stability of this DG phase extends further within ultrathin films all the way down to the two‐dimensional limit of 15 nm in which film thickness, l , is now less than the surface‐oriented unit cell height, h DG . In addition to raising the fundamental question of what minimally constitutes a Schoen triply periodic minimal surface and DG lattice, these results serve to establish the class of sugar–polyolefin conjugates as a new material platform for nanoscience and nanotechnology.

Nowak, Samantha R.↗
DOE OSTI2021

Shear-free mixing to achieve accurate temporospatial nanoscale kinetics through scanning-SAXS: ion-induced phase transition of dispersed cellulose nanocrystals

Time-resolved in situ characterization of well-defined mixing processes using small-angle X-ray scattering (SAXS) is usually challenging, especially if the process involves changes of material viscoelasticity. In specific, it can be difficult to create a continuous mixing experiment without shearing the material of interest; a desirable situation since shear flow both affects nanoscale structures and flow stability as well as resulting in unreliable time-resolved data. Here, we demonstrate a flow-focusing mixing device for in situ nanostructural characterization using scanning-SAXS. Given the interfacial tension and viscosity ratio between core and sheath fluids, the core material confined by sheath flows is completely detached from the walls and forms a zero-shear plug flow at the channel center, allowing for a trivial conversion of spatial coordinates to mixing times. With this technique, the time-resolved gel formation of dispersed cellulose nanocrystals (CNCs) was studied by mixing with a sodium chloride solution. It is observed how locally ordered regions, so called tactoids, are disrupted when the added monovalent ions affect the electrostatic interactions, which in turn leads to a loss of CNC alignment through enhanced rotary diffusion. The demonstrated flow-focusing scanning-SAXS technique can be used to unveil important kinetics during structural formation of nanocellulosic materials. However, the same technique is also applicable in many soft matter systems to provide new insights into the nanoscale dynamics during mixing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Visualizing Size-Dependent Dynamics of CeO 2-δ {100}-Supported CoO x Nanoparticles Under CO 2 Hydrogenation Conditions

Carbon dioxide is a major greenhouse gas. In order to optimize processes focused on its chemical valorization, one needs detailed information about the effects of CO 2 and/or CO 2 /H 2 mixtures on the structure and morphology of metal/oxide catalysts. Here, in this study, the evolution of a catalyst with cobalt supported on CeO 2 -cube nanostructures under CO 2 hydrogenation conditions was investigated by using a set of in situ characterization techniques (X-ray absorption fine structure, X-ray diffraction, diffuse reflectance infrared Fourier transform spectroscopy, and environmental transmission electron microscopy (TEM)). The {100} facets of the ceria support displayed an unexpectedly high stability due to strong interactions with the aggregates of cobalt oxide. A significant influence of interfacial bonding between CoO x and CeO 2-δ {100} is evident through a clear preference in the orientation of CoO x nanoparticles (NPs) with respect to the substrate. For initially reduced Co/CeO 2 -cube nanostructures, a kinetically controlled oxidation of cobalt upon the introduction of CO 2 was observed during the early stages of CO 2 hydrogenation. Environmental TEM revealed the size-dependent morphological behavior of cobalt oxide NPs due to strong interactions with the CeO 2 {100} surface. When the environment was switched from H 2 to a mixture of H 2 and CO 2 at 250 °C, small CoO x NPs (in the largest dimension < 2.5 nm) rapidly transformed from a pyramidal three-dimensional (3D) form to a planar, monatomic layer attached to the concurrently oxidized CeO 2-δ {100} surface. This maximizes the number of sites available for the binding of CO 2 or reaction intermediates. The shape transformation reflected the oxophilic character of cobalt and strong metal–support interactions. The removal of CO 2 from the gas phase led to a reduction of the cobalt oxide NPs by hydrogen and a reversible two-dimensional → 3D transformation. In contrast, no significant morphological changes, apart from further oxidation, were observed for big CoO x NPs (in the largest dimension > 3 nm). These trends are not seen for nanoparticles of noble metals. The observed morphological and structural changes in the small CoO x NPs affected the stability of reaction intermediates and modified the selectivity of the CoO x /CeO 2 catalyst system for methane production.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Symmetry-Breaking and Self-Sorting in Block Copolymer-Based Multicomponent Nanocomposites

Co-assembly of inorganic nanoparticles (NPs) and nanostructured polymer matrix represents an intricate interplay of enthalpic or entropic forces. Particle size largely affects the phase behavior of the nanocomposite. Theoretical studies indicate that new morphologies would emerge when the particles become comparable to the soft matrix's size, but this has rarely been supported experimentally. By designing a multicomponent blend composed of NPs, block copolymer-based supramolecules, and small molecules, a 3-D ordered lattice beyond the native BCP's morphology was recently reported when the particle is larger than the microdomain of BCP. The blend can accommodate various formulation variables. In this work, when the particle size equals the microdomain size, a symmetry-broken phase appears in a narrow range of particle sizes and compositions, which we named the "train track" structure. In this phase, the NPs aligned into a 3-D hexagonal lattice and packed asymmetrically along the c axis, making the projection of the ac and the bc plane resemble train tracks. Computational studies show that the broken symmetry reduces the polymer chain deformation and stabilizes the metastable hexagonally perforated lamellar morphology. Given the mobility of the multicomponent blend, the system shows a self-sorting behavior: segregating into two macroscopic phases with different nanostructures based on only a few nanometers NP size differences. Smaller NPs form "train track" morphology, while larger NPs form a "simple hexagon" structure, where the NPs take a symmetric hexagonal arrangement. Detailed structural evolution and simulation studies confirm the systematic-wide cooperativity across different components, indicating the strong self-regulation of the multicomponent system.

"train track" morphology↗