Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model updating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Status Update: Deposition Modeling For SNF Canister CISCC

This report fulfills the M3 milestones M3SF-21PN010207025 & M3SF-20PN0102070412. During fiscal year (FY) 2020, Pacific Northwest National Laboratory (PNNL) worked to further develop the FY 2019 deposition and particle tracking models. This status report outlines these efforts and presents the progress made so far. Model development work is ongoing and is planned to continue in FY 2021. The FY 2020 model development included work on: Wind Effects. Model development and sensitivity studies, investigated how wind direction and speed affect deposition; Brownian Motion. Implementing Brownian Motion into existing models; Particle Size Variability. Depending on the particle composition, the diameter of the particle may vary with changes in relative humidity. Models were developed to analyze this; Multiphase and Fluid Film Modeling. Investigating canister surface wetting and drying, and how this effects overall deposition. Models were developed to analyze this; Difusophoresis. Performing initial work to implement diffusiophoresis into the existing models; Turbophoresis. Performing initial work to implement turbophoresis into the existing models. Much of this work will continue into FY21. The authors present initial results and discus current and future work.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Update on Model Specification Development of Ternary Pumped Storage Technologies [Slides]

T-PSH is an innovative structure of C-PSH that features two turbines, one for pumping and one for generation, replacing the single turbine in C-PSH. These turbines are housed in separate chambers, with an additional set of penstocks connecting the pump turbine to the hydraulic system. This structure enables T-PSH to operate in an HSC mode, allowing for simultaneous pumping and generation, which provides greater operational flexibility compared to C-PSH. To model T-PSH's HSC mode, a user defined turbine and governor system model is required, including the shared penstock model and additional pump turbine model. This specification will focus on the details of the user-defined turbine and governor model, which leverages the HYGOV model.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Comprehensive Analysis of the Neutrino Process in Core-collapsing Supernovae

We investigate the neutrino flavor change effects due to neutrino self-interaction and shock wave propagation, as well as the matter effects on the neutrino process in core-collapsing supernovae (CCSNe). For the hydrodynamics, we use two models: a simple thermal bomb model and a specified hydrodynamics model for SN1987A. For the presupernova model, we take an updated model, adjusted to explain SN1987A, which employs recent developments in the (n, γ) reaction rates for nuclei near the stability line (A ~ 100). As for the neutrino luminosity, we adopt two different models: equivalent neutrino luminosity and nonequivalent luminosity models. The latter is taken from a synthetic analysis of CCSN simulation data, which quantitatively presented the results obtained by various neutrino transport models. Relevant neutrino-induced reaction rates are calculated using a shell model for light nuclei and a quasiparticle random phase approximation model for heavy nuclei. For each model, we present abundances of the light nuclei ( 7 Li, 7 Be, 11 B, and 11 C) and the heavy nuclei ( 92 Nb, 98 Tc, 138 La, and 180 Ta) produced by the neutrino process. The light nuclei abundances turn out to be sensitive to the Mikheyev–Smirnov–Wolfenstein (MSW) region around O-Ne-Mg layer while the heavy nuclei are mainly produced prior to the MSW region. Through detailed analyses, we find that neutrino self-interaction becomes a key ingredient, in addition to the MSW effect, for understanding the neutrino process and the relevant nuclear abundances. The normal mass hierarchy is shown to be more compatible with the meteorite data. The main nuclear reactions for each nucleus are also investigated in detail.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1983

Modeling global structural damping in trusses using simple continuum models

Truss beams with members having viscous damping are modeled as continuum Timoshenko beams. Procedures for deriving the equivalent beam stiffnesses and damping are presented. The global damping for the continuum beam is explicitly expressed in terms of the damping coefficients of the individual truss members. The continuum beam model is used to study transient vibration problems and the solutions are compared well with the full scale finite element solutions. The gradient method is used for parameter estimations in conjunction with the Timoshenko beam model. It is shown that the Timoshenko beam model can be easily updated with measured data and the updated model can yield very accurate transient solutions.

Sun, C. T.↗
NASA NTRS1986

Multiple boundary condition test (MBCT) approach to update mathematical models of large flexible structures

A major challenge to the structural dynamicist is to validate mathematical models of large space structures which cannot be ground tested because of its size and/or flexibility. The paper presents a Multiple Boundary Condition Test (MBCT) approach which allows a systematic validation of the mathematical model by performing a number of ground tests on a large structure with variable boundary conditions. A numerical simulation is presented which illustrates the validity of the MBCT including some of the potential limitations.

Wada, B. K.↗
NASA NTRS1992

Sudbury project (University of Muenster-Ontario Geological Survey): Summary of results - an updated impact model

In 1984 the Ontario Geological Survey initiated a research project on the Sudbury structure (SS) in cooperation with the University of Muenster. The project included field mapping (1984-1989) and petrographic, chemical, and isotope analyses of the major stratigraphic units of the SS. Four diploma theses and four doctoral theses were performed during the project (1984-1992). Specific results of the various investigations are reported. Selected areas of the SS were mapped and sampled: Footwall rocks; Footwall breccia and parts of the sublayer and lower section of the Sudbury Igneous Complex (SIC); Onaping Formation and the upper section of the SIC; and Sudbury breccia and adjacent Footwall rocks along extended profiles up to 55 km from the SIC. All these stratigraphic units of the SS were studied in substantial detail by previous workers. The most important characteristic of the previous research is that it was based either on a volcanic model or on a mixed volcanic-impact model for the origin of the SS. The present project was clearly directed toward a test of the impact origin of the SS without invoking an endogenic component. In general, our results confirm the most widely accepted stratigraphic division of the SS. However, our interpretation of some of the major stratigraphic units is different from most views expressed. The stratigraphy of the SS and its new interpretation is given as a basis for discussion.

Avermann, M.↗
NASA NTRS1994

Cycle life versus depth of discharge update on modeling studies

The topics are presented in viewgraph form and cycle life vs. depth of discharge data for the following are presented: data as of three years ago; Air Force/Crane-Fuhr-Smithrick; Ken Fuhr's Data; Air Force/Crane Data; Eagle-Pitcher Data; Steve Schiffer's Data; John Smithrick's Data; temperature effects; and E-P, Yardney, and Hughes 26% Data. Other topics covered include the following: LeRC cycling tests of Yardney Space Station Cells; general statements; general observations; two different models of cycle life vs. depth of discharge; and other degradation modes.

Thaller, Lawrence H.↗
NASA NTRS1999

The JPL Proton Fluence Model: An Update

The development of new technologies and the miniaturization of sensors bring new requirements for our ability to predict and forecast hazardous space weather conditions.

solar events spacecraft environments↗
NASA NTRS2017

Updates on Modeling the Water Cycle with the NASA Ames Mars Global Climate Model

Global Circulation Models (GCMs) have made steady progress in simulating the current Mars water cycle. It is now widely recognized that clouds are a critical component that can significantly affect the nature of the simulated water cycle. Two processes in particular are key to implementing clouds in a GCM: the microphysical processes of formation and dissipation, and their radiative effects on heating/ cooling rates. Together, these processes alter the thermal structure, change the dynamics, and regulate inter-hemispheric transport. We have made considerable progress representing these processes in the NASA Ames GCM, particularly in the presence of radiatively active water ice clouds. We present the current state of our group's water cycle modeling efforts, show results from selected simulations, highlight some of the issues, and discuss avenues for further investigation.­

Global Circulation Models (GCMs)↗
NASA NTRS2019

Improving Accuracy of Structural Dynamic Modification with Augmented Residual Vectors

It is often important to perform sensitivity analysis to determine how a structural model will be impacted by design changes. Often, the structural analysts will manually make changes to the finite element model (FEM) to determine the effects. But when dealing with a large FEM with millions of degrees of freedom these manual changes can be cumbersome and calculation of the effects can computationally expensive. Therefore, it is desirable to determine the effects of model changes through approximation methods. One common technique is to determine the analytical sensitivity of the FEM model with respect to the given change. These analytical sensitivities are valid when small changes are made to the structural model, but invalid if large changes need to be assessed. Another approach is to use Structural Dynamic Modification (SDM) to create a surrogate model to analyze model changes. SDM is a widely-used sensitivity method and is used in applications of model updating, uncertainty quantification, and model design studies. SMD is valid for moderate (10-20 percent) changes in the structural model, but model approximations are often needed for large parameter changes (greater than 20 percent). Structural Dynamic Modification can be improved by using residual vectors to augment the surrogate model formulation from SDM. Adding the residual modes increases the fidelity of the surrogate model while keeping the computational cost low. This paper discusses the application and limitations of the augmented residual modes method to two structures: the Integrated Spacecraft and Payload Element (ISPE) of the Space Launch System (SLS) and the full SLS as it is configured during its Integrated Modal Test (IMT).

Stewart, Eric C.↗
NASA NTRS1994

Efficient Updating of Model Parameters Using Modal Coordinates

Model correlation methods based on iterative modification of physical model parameters have been used with frequent success. The cost and time to perform these methods is driven mostly by the need to recompute normal modes and parameter sensitivities from the full finite element model after each adjustment.

modal↗