Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “memory effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Low Temperature Creep of Hot-Extruded Near-Stoichiometric NiTi Shape Memory Alloy: Effect of Thermal Cycling - Part 2

This paper is the first report on the effect prior low temperature creep on the thermal cycling behavior of NiTi. The isothermal low temperature creep behavior of near-stoichiometric NiTi between 300 and 473 K was discussed in Part I. The effect of temperature cycling on its creep behavior is reported in the present paper (Part II). Temperature cycling tests were conducted between either 300 or 373 K and 473 K under a constant applied stress of either 250 or 350 MPa with hold times lasting at each temperature varying between 300 and 700 h. Each specimen was pre-crept either at 300 or at 473 K for several months under an identical applied stress as that used in the subsequent thermal cycling tests. Irrespective of the initial pre-crept microstructures, the specimens exhibited a considerable increase in strain with each thermal cycle so that the total strain continued to build-up to 15 to 20 percent after only 5 cycles. Creep strains were immeasurably small during the hold periods. It is demonstrated that the strains in the austenite and martensite are linearly correlated. Interestingly, the differential irrecoverable strain, in the material measured in either phase decreases with increasing number of cycles, similar to the well-known Manson-Coffin relation in low cycle fatigue. Both phases are shown to undergo strain hardening due to the development of residual stresses. Plots of true creep rate against absolute temperature showed distinct peaks and valleys during the cool-down and heat-up portions of the thermal cycles, respectively. Transformation temperatures determined from the creep data revealed that the austenitic start and finish temperatures were more sensitive to the pre-crept martensitic phase than to the pre-crept austenitic phase. The results are discussed in terms of a phenomenological model, where it is suggested that thermal cycling between the austenitic and martensitic phase temperatures or vice versa results in the deformation of the austenite and a corresponding development of a back stress due to a significant increase in the dislocation density during thermal cycling.

Raj, S. V.↗
NASA NTRS1991

Non-volatile, high density, high speed, Micromagnet-Hall effect Random Access Memory (MHRAM)

The micromagnetic Hall effect random access memory (MHRAM) has the potential of replacing ROMs, EPROMs, EEPROMs, and SRAMs because of its ability to achieve non-volatility, radiation hardness, high density, and fast access times, simultaneously. Information is stored magnetically in small magnetic elements (micromagnets), allowing unlimited data retention time, unlimited numbers of rewrite cycles, and inherent radiation hardness and SEU immunity, making the MHRAM suitable for ground based as well as spaceflight applications. The MHRAM device design is not affected by areal property fluctuations in the micromagnet, so high operating margins and high yield can be achieved in large scale integrated circuit (IC) fabrication. The MHRAM has short access times (less than 100 nsec). Write access time is short because on-chip transistors are used to gate current quickly, and magnetization reversal in the micromagnet can occur in a matter of a few nanoseconds. Read access time is short because the high electron mobility sensor (InAs or InSb) produces a large signal voltage in response to the fringing magnetic field from the micromagnet. High storage density is achieved since a unit cell consists only of two transistors and one micromagnet Hall effect element. By comparison, a DRAM unit cell has one transistor and one capacitor, and a SRAM unit cell has six transistors.

Wu, Jiin C.↗
DOE OSTI2021

External-Field-Induced Phase Transformation and Associated Properties in a Ni 50 Mn 34 Fe 3 In 13 Metamagnetic Shape Memory Wire

Metamagnetic shape memory alloys exhibit a series of intriguing multifunctional properties and have great potential for applications in magnetic actuation, sensing and magnetic refrigeration. However, the poor mechanical properties of these alloys with hardly any tensile deformability seriously limit their practical application. In the present work, we developed a Ni-Fe-Mn-In microwire that exhibits both a giant, tensile superelasticity and a magnetic-field-induced first-order phase transformation. The recoverable strain of superelasticity is more than 20% in the temperature range of 233–283 K, which is the highest recoverable strain reported heretofore in Ni-Mn-based shape memory alloys (SMAs). Moreover, the present microwire exhibits a large shape memory effect with a recoverable strain of up to 13.9% under the constant tensile stress of 225 MPa. As a result of the magnetic-field-induced first-order phase transformation, a large reversible magnetocaloric effect with an isothermal entropy change ΔS m of 15.1 J kg –1 K –1 for a field change from 0.2 T to 5 T was achieved in this microwire. The realization of both magnetic-field and tensile-stress-induced transformations confers on this microwire great potential for application in miniature multi-functional devices and provides an opportunity for multi-functional property optimization under coupled multiple fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Average nonlinear dynamics of particles in gravitational pulses: Effective Hamiltonian, secular acceleration, and gravitational susceptibility

Particles interacting with a prescribed quasimonochromatic gravitational wave (GW) exhibit secular (average) nonlinear dynamics that can be described by Hamilton’s equations. We derive the Hamiltonian of this “ponderomotive” dynamics to the second order in the GW amplitude for a general background metric. For the special case of vacuum GWs, we show that our Hamiltonian is equivalent to that of a free particle in an effective metric, which we calculate explicitly. We also show that already a linear GW pulse displaces a particle from its unperturbed trajectory by a finite distance that is independent of the GW phase and proportional to the integral of the pulse intensity.This effect is independent from the nonlinear memory effects that has been known. We calculate the particle displacement analytically and show that our result is in agreement with numerical simulations. We also show how the Hamiltonian of the nonlinear averaged dynamics naturally leads to the concept of the linear gravitational susceptibility of a particle gas with an arbitrary phase-space distribution. We calculate this susceptibility explicitly to apply it, in a follow-up paper, toward studying self-consistent GWs in inhomogeneous media within the geometrical-optics approximation

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Delay Effect for Pulsed Excitation of Actuator Based on Rapidly Quenched Ti{sub 2}NiCu Alloy with Thermoelastic Martensitic Transformation

The pulse response of the actuator based on rapidly quenched Ti{sub 2}NiCu alloy with a thermoelastic martensitic transformation and the shape memory effect is studied experimentally. The mechanical response of the actuator cooled by running water is preserved when the duration of the excitation (activating) electric pulses decreases to 2 ms. High-speed activation is accompanied by a delay in the mechanical pulse in comparison with the excitation electric pulse. The minimum duration of the mechanical pulse, taking into account the delay, was 8 ms, which corresponds to a frequency of 125 Hz with periodic activation. Estimates show that the delay time includes both the time of mechanical inertia and the time of thermal inertia associated with heat transfer. The possible limitation of the rate of activation due to kinetic phenomena during the thermoelastic martensitic transition is evaluated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Effect of HfO{sub 2} Nanoparticles on the Shape and Parameters of Pseudoelastic Stress–Strain Curves of Cu–Al–Ni Alloy Single Crystals

The effect of hafnium dioxide (HfO{sub 2}) disperse nanoparticles on the shape and parameters of stress–strain curves for the compression of Cu–13.5 wt %Al–4.0 wt %Ni alloy single crystals with memory effect has been investigated. It is found that 30-nm nanoparticles with a volume fraction of 1% affect the shape of pseudoelastic stress–strain curves of an alloy crystal, namely, substantially elevate its (martensite) strain-hardening coefficient θ and deformation work and eliminate deforming stress drops associated with the existence of interfacial stresses under martensite transformation, but do not affect the hysteresis of pseudoelastic stress–strain curves and deformation of shape memory. Simulation of pseudoelastic stress–strain curves and analysis of results using the smeared martensite transformation have revealed that the increase in coefficient θ ~ ω{sup –1} and elimination of stress drops on pseudoelastic stress–strain curves are associated with a considerable (order-of-magnitude) decrease in martensite nucleus volume ω ~ w, where w is the transverse size of nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Self-assembly of wood-based shape memory composites triggered by solar-thermal energy

Transporting and assembling large, complex structures poses significant challenges due to their size, geometry, and cost. Additionally, the installation sites are often inaccessible or hazardous for humans, necessitating self-assembling capabilities in these structures. To mitigate these challenges, we propose using 3D printing materials with shape memory effect (SME) for both transport and construction. This approach involves developing 3D modular components into flat sheets for easier transportation, and then self-assembling into 3D structures on-site using solar energy. To gain a deeper understanding of the factors influencing material memory performance, we have chosen a composite PLA/WF, which is polylactic acid (PLA) with 20 wt% wood flour (WF) for this purpose, leveraging its high tensile modulus at 0.966 GPa, low cost, and sustainability. Printed shapes with this material can maintain a recovery ratio over 90% after 3 cycles. While traditional composites fillers (e.g. glass or carbon fiber) are added to enhance mechanical and thermal properties, the addition of bio-based fillers like WF accomplish similar goals without compromising sustainability. We conducted multiple experiments to demonstrate how environmental conditions (i.e. temperature) maximize the material’s SME. Although still at an early stage, this study provides initial insights into bridging the gap between the small-scale nature of shape memory polymers (SMPs) and their potential for large-scale additive manufacturing, addressing a critical need for efficient and sustainable construction. In the long term, we hope our study contributes to the design vision of utilizing SMPs for transportation, assembly, and deployment of complex structures, providing a new pathway for sustainable construction and transportation of large-scale structures to hard-to-access locations such as disaster-affected areas and remote deserts, etc.

4D printing↗
DOE OSTI2020

From a conventional ferromagnetism to a frustrated magnetism: An unexpected role of Fe in Nd(Al 1-x Fe x ) 2 (x ≤ 0.2)

The structure and magnetic properties of Nd(Al 1-x Fe x ) 2 alloys with x = 0, 0.05, 0.1 and 0.2, which adopt cubic MgCu 2 -type structure with space group Fd3¯m, are studied using x-ray powder diffraction, static and dynamic magnetization, and calorimetric measurements. The lattice constant decreases linearly with increasing Fe content from 8.0106(4) Å to 7.9044(4) Å. Large thermal irreversibilities between zero-field-cooled and field-cooled conditions are observed for all substituted samples. Here, the magnetic transition temperatures exhibit a minimum for x = 0.1, and coercive fields at 2 K increase from 70 Oe for x = 0 to 6.3 kOe for x = 0.2. The absence of λ-type peak in the heat capacity data, frequency dependence of ac magnetic susceptibility, and memory effects indicate formation of a cluster-glass magnetic state when x ≥ 0.1.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Active interlocking metasurfaces enabled by shape memory alloys

Interlocking metasurfaces (ILMs) are a newly developed joining technology that relies on arrays of interlocking features that transmit force and constrain motion between adjoining bodies in one or more directions. This study explores harnessing the shape memory effect (SME) in Nickel-Titanium shape memory alloys (NiTi SMAs) in structures fabricated using additive manufacturing (AM) to advance the development of active ILMs by creating unit cells that open or close at specific temperatures. The study encompasses designing and fabricating two distinct interlocking array configurations using near-equiatomic NiTi powder and the laser powder bed fusion (L-PBF) AM technique, following a previously developed AM process optimization framework to manufacture defect-free parts. To guide the design process, finite element analysis (FEA) was employed to predict strain values during engage-disengage cycles. The martensitic transformation characteristics of the ILMs were characterized. Thermomechanical testing revealed that the ILMs demonstrate high locking force once engaged, coupled with complete shape recovery and good cyclic stability. Digital image correlation (DIC) was also employed to validate the FEA predictions during the engage-disengage cycles. The results indicate that NiTi SMA-based ILMs can be designed and fabricated into complex shapes using L-PBF. By leveraging the SME, the functionality of an ILM can be improved upon. The combination of computational modeling, additive manufacturing, and thermomechanical and physical property characterization provides a framework for designing future ILMs out of active materials.

Additive manufacturing↗
DOE OSTI2018

Shape memory and superelasticity of nanograined Ti-51.2 at.% Ni alloy processed by severe plastic deformation via high-ratio differential speed rolling

A novel method of producing nanograined Ni-rich superelastic NiTi alloys in sheet form was proposed using a combination of severe plastic deformation via high-ratio differential speed rolling (HRDSR) and post-deformation annealing. The HRDSR-processed microstructure was composed of heavily deformed austenite and martensite grains, and amorphous phases. After annealing at 673 K, the severely deformed microstructure with no functional properties evolved to the nanograined structure (20–70 nm) composed of austenite and martensite nanograins and sub-nanograins through static recovery or continuous static recrystallization process. The nanograined microstructure had a high resistance to martensitic transformation upon cooling and slip deformation during straining. As a result, the HRDSR-processed alloy annealed at 673K exhibited superior superelasticity compared to the alloys with coarse grains. At the higher annealing temperature of 873 K, the micron-sized recrystallized grains with low dislocations developed through discontinuous static recrystallization process. In this case, deformation during straining was governed by the detwinning of twinned martensite, and as a result, shape memory effect was more significantly pronounced than superelasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Structure-phase state and mechanical properties of surface layers in titanium nikelide single crystals after shock mechanical treatment

The influence of ultrasonic shock surface treatment (USST) on refine structure and mechanical characteristics of surface layers and deformation behaviour of volume samples of TiNi(Fe, Mo) shape memory effect alloy single crystals is studied using optical and transmission electron microscope, X-ray diffraction, nanoindentation, mechanical attrition testing and experiments on uniaxial tension.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Synthesize and microstructure characterization of Ni{sub 43}Mn{sub 41}Co{sub 5}Sn{sub 11} Heusler alloy

The ferromagnetic heusler alloys are promising materials in many technical applications due to their multifunctional properties such as shape memory effect, magnetocaloric effect, giant magnetoresistance, etc. In this work, synthesize and characterization of polycrystalline Ni{sub 43}Mn{sub 41}Co{sub 5}Sn{sub 11} (NMCS) alloy are reported. Alloy preparation was conducted by melting the constitute elements under an innert Argon (Ar) atmosphere in a vacuum mini arc-melting furnace. Homogenization of the microstructure of the as-cast ingot was obtained after annealing process at 750°C for 48 hours. It is shown that the dendrites structure has changed to equaixed grains morphology after homogenization. Microstructure characteristics of material by x-ray diffraction revealed that the alloy has a L{sub 21}-type cubic crystal structure as the main phase at room temperature. In order to induce the shape anisotropy, a forging treatment was applied to show the shape orientation of material. Various enhancements of magnetic properties in a longitudinal direction were observed at various degree of anisotropy. The microstructure changes of as-cast NMCS and effects of homogenization treatments as studied by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) are discussed in details.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Functional Performances of CuZnAl Shape Memory Alloy Open-Cell Foams

Shape memory alloys (SMAs) with cellular structure offer a unique mixture of thermo-physical–mechanical properties. These characteristics can be tuned by changing the pore size and make the shape memory metallic foams very attractive for developing new devices for structural and functional applications. In this work, CuZnAl SMA foams were produced through the liquid infiltration of space holder method. In comparison, a conventional CuZn brass alloy was foamed trough the same method. Functional performances were studied on both bulk and foamed SMA specimens. Calorimetric response shows similar martensitic transformation (MT) below 0 °C. Compressive response of CuZnAl revealed that mechanical behavior is strongly affected by sample morphology and that damping capacity of metallic foam is increased above the MT temperatures. The shape memory effect was detected in the CuZnAl foams. The conventional brass shows a compressive response similar to that of the martensitic CuZnAl, in which plastic deformation accumulation occurs up to the cellular structure densification after few thermal cycles.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Narrow thermal hysteresis of NiTi shape memory alloy thin films with submicrometer thickness

NiTi shape memory alloy (SMA) thin films were fabricated using biased target ion beam deposition (BTIBD), which is a new technique for fabricating submicrometer-thick SMA thin films, and the capacity to exhibit shape memory behavior was investigated. The thermally induced shape memory effect (SME) was studied using the wafer curvature method to report the stress-temperature response. The films exhibited the SME in a temperature range above room temperature and a narrow thermal hysteresis with respect to previous reports. To confirm the underlying phase transformation, in situ x-ray diffraction was carried out in the corresponding phase transformation temperature range. The B2 to R-phase martensitic transformation occurs, and the R-phase transformation is stable with respect to the expected conversion to the B19′ martensite phase. The narrow hysteresis and stable R-phase are rationalized in terms of the unique properties of the BTIBD technique.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Crystallization study of amorphous sputtered NiTi bi-layer thin film

The crystallization of Ni-rich/NiTiCu bi-layer thin film deposited by magnetron sputtering from two separate alloy targets was investigated. To achieve the shape memory effect, the NiTi thin films deposited at room temperature with amorphous structure were annealed at 773 K for 15, 30, and 60 min for crystallization. Characterization of the films was carried out by differential scanning calorimetry to indicate the crystallization temperature, grazing incidence X-ray diffraction to identify the phase structures, atomic force microscopy to evaluate surface morphology, scanning transmission electron microscopy to study the cross section of the thin films. The results show that the structure of the annealed thin films strongly depends on the temperature and time of the annealing. Crystalline grains nucleated first at the surface and then grew inward to form columnar grains. Furthermore, the crystallization behavior was markedly affected by composition variations. - Highlights: • A developed bi-layer Ni45TiCu5/Ni50.8Ti was deposited on Si substrate and crystallized. • During crystallization, The Ni{sub 45}TiCu{sub 5} layer is thermally less stable than the Ni-rich layer. • The activation energy is 302 and 464 kJ/mol for Cu-rich and Ni-rich layer in bi-layer, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of Thermomechanical Treatment on Structural-Phase Transformations and Mechanical Properties of the Cu–Al–Ni Shape-Memory Alloys

Using the methods of optical and electron microscopy and electron and X-ray diffraction analyses, the influence of thermomechanical treatment on the mechanical properties, average grain size, and structural and phase transformations is investigated in the Cu–Al–Ni triple alloys exhibiting a shape memory effect. In the alloys under study with a fixed content of 3wt% Ni the concentration of aluminum was varied from 9 to 14 wt%. It is shown that in the alloys subjected to thermal treatment, including forging and homogenizing annealing using controlled recrystallization in the austenitic state followed by quenching, the grain-boundary disintegration and segregation disappear. It is found out that the microstructure of the alloys in the hot-forged and hardened states with the content of aluminum 9–10 wt%. consists of the grains of the average dimensions within 60–80 μm, with the content of aluminum 10–12 wt% – 100–350 μm, while in the alloys with the content of aluminum up to 14 12 wt% the average grain size reaches 1 mm. According to the data of mechanical testing at room temperature, with a decrease in the content of aluminum the ultimate tensile strength (σ{sub UTS}), the yield strength (σ{sub М}) and the relative elongation (δ) increase. An improvement of the mechanical properties of the alloys is attributed to the grain structure refinement of the β{sub 2}-austenite and package substructure of the β'{sub 1}-and γ'{sub 1}-martensites as the content of aluminum in the alloys decreases. For instance, in the fine-grained alloys containing 9.2 and 9.5 wt% Al the value of relative elongation remains at a high level (>10%), while for the other alloys with 10–14 wt% Al it does not exceed 5%. As the content of aluminum in the alloys decreases, the character of the specimen fracture under uniaxial tension changes (from brittle to ductile).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Data-driven learning of Mori–Zwanzig operators for isotropic turbulence

Developing reduced-order models for turbulent flows, which contain dynamics over a wide range of scales, is an extremely challenging problem. In statistical mechanics, the Mori–Zwanzig (MZ) formalism provides a mathematically exact procedure for constructing reduced-order representations of high-dimensional dynamical systems, where the effects due to the unresolved dynamics are captured in the memory kernel and orthogonal dynamics. Turbulence models based on MZ formalism have been scarce due to the limited knowledge of the MZ operators, which originates from the difficulty in deriving MZ kernels for complex nonlinear dynamical systems. In this work, we apply a recently developed data-driven learning algorithm, which is based on Koopman's description of dynamical systems and Mori's linear projection operator, on a set of fully resolved isotropic turbulence datasets to extract the Mori–Zwanzig operators. With data augmentation using known turbulence symmetries, the extracted Markov term, memory kernel, and orthogonal dynamics are statistically converged and the generalized fluctuation–dissipation relation can be verified. The properties of the memory kernel and orthogonal dynamics, and their dependence on the choices of observables are investigated to address the modeling assumptions that are commonly used in MZ-based models. A series of numerical experiments are then constructed using the extracted kernels to evaluate the memory effects on prediction. The results show that the prediction errors are strongly affected by the choice of observables and can be further reduced by including the past history of the observables in the memory kernel.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1986

1986 Annual Conference on Nuclear and Space Radiation Effects, 23rd, Providence, RI, July 21-23, 1986, Proceedings

The present conference on the effects of nuclear and space radiation on electronic hardware gives attention to topics in the basic mechanisms of radiation effects, dosimetry and energy-dependent effects, electronic device radiation hardness assurance, SOI/SOS radiation effects, spacecraft charging and space radiation, IC radiation effects and hardening, single-event upset (SEU) phenomena and hardening, and EMP/SGEMP/IEMP phenomena. Specific treatments encompass the generation of interface states by ionizing radiation in very thin MOS oxides, the microdosimetry of meson energy deposited on 1-micron sites in Si, total dose radiation and engineering studies, plasma interactions with biased concentrator solar cells, the transient imprint memory effect in MOS memories, mechanisms leading to SEU, and the vaporization and breakdown of thin columns of water.

Ellis, Thomas D.↗