Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “linear collider”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

GeantV: Results from the Prototype of Concurrent Vector Particle Transport Simulation in HEP

Full detector simulation was among the largest CPU consumers in all CERN experiment software stacks for the first two runs of the Large Hadron Collider. In the early 2010s, it was projected that simulation demands would scale linearly with increasing luminosity, with only partial compensation from increasing computing resources. The extension of fast simulation approaches to cover more use cases that represent a larger fraction of the simulation budget is only part of the solution, because of intrinsic precision limitations. The remainder corresponds to speeding up the simulation software by several factors, which is not achievable by just applying simple optimizations to the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport code in order to benefit from features of fine-grained parallelism, including vectorization and increased locality of both instruction and data. This paper provides an extensive presentation of the results and achievements of this R&D project, as well as the conclusions and lessons learned from the beta version prototype.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

The FRIB Decay Station: New Horizons with Rare Isotopes

In May 2022, the Facility for Rare Isotope Beams (FRIB), located on the campus of Michigan State University (MSU), began delivering exotic isotopes to an international community of scientists. New discoveries are now being reported from radioactive decay of neutron-rich nuclei near N = 20 and N = 28.FRIB is expected to produce roughly 80% of the unstable or radioactive isotopes predicted to exist up to uranium (Z = 92). The new user facility is supported by the U.S. Department of Energy, and it is operated by MSU. A high-power superconducting linear accelerator, shaped like a paper-clip, drives the production of these rare isotopes by colliding stable nuclei moving at half the speed of light with a rotating, water-cooled graphite tar-get. These collisions cause the primary stable beam to fragment into a wide variety of unstable nuclei, which can be subsequently filtered through a multistage magnetic separator, the Advanced Rare Isotope Separator, and transported to one of several experimental stations. The FRIB Decay Station initiator (FDSi) (see Figure 1) was developed to enable comprehensive radio-active decay studies of the exotic nuclei produced by FRIB and it was used in the first two experiments in 2022. Further, the FDSi is a highly reconfigurable multidetector system with two focal planes (FP1 for discrete spectroscopy and FP2 for total absorption spectroscopy) that can be optimized for the specific science goals of each experiment. It is designed, built, and operated by a community of users with the sup-port of U.S. funding agencies, including the Department of Energy and National Science Foundation.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

A Forward Analytic Model of Neutron Time-of-Flight Signals for Inferring Ion Temperatures from MagLIF Experiments

A forward analytic model is required to rapidly simulate the neutron time-of-flight (nToF) signals that result from magnetized liner inertial fusion (MagLIF) experiments at Sandia’s Z Pulsed Power Facility. Various experimental parameters, such as the burn-weighted fuel-ion temperature and liner areal density, determine the shape of the nToF signal and are important for characterizing any given MagLIF experiment. Extracting these parameters from measured nToF signals requires an appropriate analytic model that includes the primary deuterium-deuterium neutron peak, once-scattered neutrons in the beryllium liner of the MagLIF target, and direct beamline attenuation. Here, mathematical expressions for this model were derived from the general-geometry time- and energy-dependent neutron transport equation with anisotropic scattering. Assumptions consistent with the time-of-flight technique were used to simplify this linear Boltzmann transport equation into a more tractable form. Models of the uncollided and once-collided neutron scalar fluxes were developed for one of the five nToF detector locations at the Z-Machine. Numerical results from these models were produced for a representative MagLIF problem and found to be in good agreement with similar neutron transport simulations. Twenty experimental MagLIF data sets were analyzed using the forward models, which were determined to only be significantly sensitive to the ion temperature. The results of this work were also found to agree with values obtained separately using a zero scatter analytic model and a high-fidelity Monte Carlo simulation. Finally, inherent difficulties in this and similar techniques are identified, and a new approach forward is suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Multi-waveband observations of colliding galaxies

Colliding galaxies represent a major challenge to both theorists and observers because of the large variety of phenomena which are expected to come into play during the interaction. Strong gravitational fluctuations may drive non-linear waves and instabilities throughout the stars and gas leading to enhanced star formation, nuclear activity and ultimately a mixing of the morphological components of the original galaxies. One relatively uncomplicated class of colliding galaxy where stellar waves play an important role in star formation are ring galaxies. Ring galaxies are probably formed when a companion galaxy passes through the center of a disk system driving circular waves through the disk (Lynds and Toomre 1976, Toomre 1978, Struck-Marcell 1990). Off-center collisions can generate non-circular waves and can be loosely described as banana-shaped although they may exhibit more complex forms as the waves expand into the disk. The propagation of such stellar and gaseous waves through the disk leads to enhanced star formation (e.g., Appleton and Struck-Marcell 1987a; Jeske 1986) and provides a unique probe of the response of the interstellar medium (ISM) to a propagating wave (see Appleton and Struck-Marcell 1987b). Here, the authors report results for 3 systems; the irregular ring Arp 143 (=VV 117); Wakamatsu's Seyfert ring (A0959-755; see Wakamatsu and Nishida 1987) and the brighter member of the pair of ring galaxies comprising of AM 1358-221. The most complete multi-wavelength data is for Arp 143. Optical charge coupled device (CCD) observations made with the 60 inch Palomar telescope at BV and r band, near-IR images at J (1.25 microns), H (1.65 microns) and k (2.2 microns) bands from the infrared camera (IRCAM) InSb array camera on the 3.8m United Kingdon Infrared Telescope (UKIRT) telescope and very large array (VLA) observations at 20cm in both the neutral hydrogen line and radio continuum are described. The observations of Wakamatsu's ring and AM 1358 were made only in the near-IR, and a comparison is made with available optical plate material.

Appleton, P. N.↗
DOE OSTI2026

Consideration of HTS rapid-cycling magnet for staged muon acceleration

The HTS conductor hysteresis dominates magnet cable power loss but is independent of the magnetic field ramping rate. This makes the HTS conductor suitable to power the rapid-cycling accelerator magnet. We present a possible application of the HTS rapid-cycling magnet as outlined in [1,2] for the staged muon acceleration including the front-end Recirculating Linear Accelerator and the followed-up Rapid Cycling Synchrotrons delivering the muon beams to the Muon Collider.[1] H. Piekarz, S. Otten, A. Kario, H. ten Kate, “Rapid-cycling HTS magnet for muon acceleration”, US MC Inaugural Meeting, FERMILAB-POSTER-24-0219-AD, August 7-9, 2024[2] H. Piekarz, B. Claypool, S. Hays, M. Kufer, V. Shiltsev, “Record High Ramping Rates in HTS Based Supercond. Accelerator Magnet”, MT 27, IEEE Trans. on Applied Superccond, 32 (2022) 6, 4100404

Piekarz, Henryk [Fermilab]↗
DOE OSTI2022

Shape of atomic nuclei in heavy ion collisions

In the hydrodynamic model description of heavy ion collisions, the final-state anisotropic flows v n are linearly related to the strengths of the multipole shape of the distribution of nucleons in the transverse plane, ε n : v n ∝ε n . The ε n , for n=1, 2, 3, 4, are sensitive to the shapes of the colliding ions, characterized by the quadrupole β 2 , octupole β 3 , and hexadecapole β 4 deformations. This sensitivity is investigated analytically and also in a Monte Carlo Glauber model. One observes a robust linear relation, $\langleε^{2}_{n}\rangle$ = $a^{'}_{n} + b^{'}_{n}β^{2}_{n}$, for events in a fixed centrality. The $\langleε^{2}_{1}\rangle$ has a contribution from β 3 and β 4 , and $\langleε^{2}_{3}\rangle$ from β 4 . In ultracentral collisions, there are little cross contributions between β 2 and ε 3 and between β 3 and ε 2 , but clear cross contributions are present in noncentral collisions. Additionally, $\langleε^{2}_{n}\rangle$ are insensitive to nonaxial shape parameters such as the triaxiality. This is good news because the measurements of v 2 , v 3 , and v 4 can be used to constrain simultaneously the β 2 , β 3 , and β 4 values. This is best done by comparing two colliding ions with similar mass numbers and therefore nearly identical $a^{'}_{n}$, to obtain a simple equation that relates the β n of the two species. Finally, this opens up the possibility to map the shape of the atomic nuclei at a timescale (<10 –24 s) much shorter than probed by low-energy nuclear structure physics (<10 –21 s), which ultimately may provide information complementary to that obtained in the nuclear structure experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

High-power test of a C-band linear accelerating structure with an RFSoC-based LLRF system

Normal conducting linear particle accelerators consist of multiple rf stations with accelerating structure cavities. Low-level rf (LLRF) systems are employed to set the phase and amplitude of the field in the accelerating structure and to compensate for the pulse-to-pulse fluctuation of the rf field in the accelerating structures with a feedback loop. The LLRF systems are typically implemented with analog rf mixers, heterodyne-based architectures, and discrete data converters. There are multiple rf signals from each of the rf stations, so the number of rf channels required increases rapidly with multiple rf stations. With a large number of rf channels, the footprint, component cost, and system complexity of the LLRF hardware will increase significantly. To meet the design goals of being compact and affordable for future accelerators, we have designed the next-generation LLRF (NG-LLRF) with a higher integration level based on RFSoC technology. The NG-LLRF system samples rf signals directly and performs rf mixing digitally. Further, the NG-LLRF has been characterized in loopback mode to evaluate the performance of the system and has also been tested with a standing-wave accelerating structure, a prototype for the Cool Copper Collider (C 3 ) with a peak rf power level up to 16.45 MW. The loopback test demonstrated amplitude fluctuation below 0.15% and phase fluctuation below 0.15°, which are considerably better than the requirements of C 3 . The rf signals from the different stages of the accelerating structure at different power levels are measured by the NG-LLRF, which will be critical references for the control algorithm designs. The NG-LLRF also offers flexibility in waveform modulation, so we have used rf pulses with various modulation schemes, which could be useful for controlling some of the rf stations in accelerators. In this paper, the high-power test results at different stages of the test setup will be summarized, analyzed, and discussed.

47 OTHER INSTRUMENTATION↗
NASA NTRS1989

Dust coagulation in ISM

Coagulation is an important mechanism in the growth of interstellar and interplanetary dust particles. The microphysics of the coagulation process was theoretically analyzed as a function of the physical properties of the coagulating grains, i.e., their size, relative velocities, temperature, elastic properties, and the van der Waal interaction. Numerical calculations of collisions between linear chains provide the wave energy in individual particles and the spectrum of the mechanical vibrations set up in colliding particles. Sticking probabilities are then calculated using simple estimates for elastic deformation energies and for the attenuation of the wave energy due to absorption and scattering processes.

Chokshi, Arati↗
NASA NTRS1993

Collisions and close encounters between massive main-sequence stars

Smooth-particle hydrodynamics is used to investigate collisions and close encounters between two massive main-sequence stars. Approximate scaling relations and fitting formulas are given for the amount of mass loss and for the critical impact parameters for capture or merging. The more massive stars, which have smaller ratios of specific binding energy to the square of escape velocity, are more easily disrupted in collisions. As the relative velocity increases, the orbital energy of the colliding stars can only be dissipated by shock heating, and the critical capture radius decreases much faster than predicted by linear theory. The average fractional mass loss per collision in a cluster is found not to depend sensitively on the stellar velocity dispersion.

Lai, Dong↗
DOE OSTI2025

Energy recovery proton linear accelerator

High-power proton linear accelerators have important applications in both scientific research and industry. However, the operation of such accelerators with megawatt-level beam power is expensive and limits the broad availability of these facilities. In this Letter, we propose a novel energy recovery proton linear accelerator in which the final GeV-level proton beam is reinjected into the linear accelerator from the accelerator exit and is decelerated in the same accelerator down to about 2 MeV, close to the initial beam energy. This substantially reduces the power consumption of the proton linear accelerator and also avoids the need for a high-power beam dump. We demonstrate this concept through self-consistent simulations and show that the beam-beam effect between the forward-accelerating beam and the backward-decelerating beam would not be a limiting factor for the proposed concept. A potential application of this concept to an electron-ion collider based on energy recovery electron and ion accelerators is discussed.

Energy recovery linacs↗
DOE OSTI2021

High-throughput injection-acceleration of electron bunches from a linear accelerator to a laser wakefield accelerator

Plasma-based accelerators (PBAs) driven by either intense lasers (laser wakefield accelerators, LWFAs) or particle beams (plasma wakefield accelerators, PWFAs), can accelerate charged particles at extremely high gradients compared to conventional radio-frequency (RF) accelerators. In the past two decades, great strides have been made in this field, making PBA a candidate for next-generation light sources and colliders. However, these challenging applications necessarily require beams with good stability, high quality, controllable polarization and excellent reproducibility. To date, such beams are generated only by conventional RF accelerators. As such, it is important to demonstrate the injection and acceleration of beams first produced using a conventional RF accelerator, by a PBA. In some recent studies on LWFA staging and external injection-acceleration in PWFA only a very small fraction (from below 0.1% to few percent) of the injected charge (the coupling efficiency) was accelerated. For future colliders where beam energy will need to be boosted using multiple stages, the coupling efficiency per stage must approach 100%. Here we report the first demonstration of external injection from a photocathode-RF-gun-based conventional linear accelerator (LINAC) into a LWFA and subsequent acceleration without any significant loss of charge or degradation of quality, which is achieved by properly shaping and matching the beam into the plasma structure. Furthermore, this is an important step towards realizing a high-throughput, multi-stage, high-energy, hybrid conventional-plasma accelerator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Electron Accelerator Lattice Design for LHeC with Permanent Magnets

We present a new ’green energy’ approach to the Energy Recovery Linac (ERL) the future Electron Ion Collider at LHeC using single beam line made of very strong focusing combined function permanent magnets and the Fixed Field Alternating Linear Gradient (FFA-LG) principle. We are basing our design on recent very successful commissioning results of the Cornell University and Brookhaven National Laboratory ERL Test Accelerator-CBETA.

Trbojevic, D.↗
DOE OSTI2024

Complexity: from Turbulence to Accelerators to Poetry

Though it may seem intuitive at times, the term 'complexity' is multifaceted, often encompassing various interacting aspects and components that follow local rules. This interaction leads to non-linearity, randomness, collective dynamics, hierarchy, and emergence. The phenomenological complexity found in large accelerators has recently been addressed by the Snowmass’21 Future Colliders Implementation Task Force (ITF). In this presentation, we will provide a concise overview of the mathematical constructs employed to assess hierarchical complexity, summarize the key findings from the ITF analysis, and offer a few examples demonstrating how this approach can be applied to analyze certain literaryclassics.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Dihadron azimuthal asymmetry and light-quark dipole moments at the Electron-Ion Collider

Here, we propose a novel method to probe light-quark dipole moments by examining the azimuthal asymmetries between a collinear pair of hadrons in semi-inclusive deep inelastic lepton scattering off an unpolarized proton target at the Electron-Ion Collider. These asymmetries provide a means to observe transversely polarized quarks, which arise exclusively from the interference between the dipole and the Standard Model interactions, thereby depending linearly on the dipole couplings. We demonstrate that this novel approach can enhance current constraints on light-quark dipole operators by an order of magnitude, free from contamination of other new physics effects. Furthermore, it allows for a simultaneous determination of both the real and imaginary parts of the dipole couplings, offering a new avenue for investigating potential CP-violating effects at high energies.

dihadron fragmentation↗
DOE OSTI2025

e + e – → ZH process in the SMEFT beyond leading order

We systematically study potential effects of Beyond the Standard Model physics in the e + e – → ZH process. To this end, we include all relevant dimension-6 Standard Model Effective Field Theory operators and work to next-to-leading order (NLO) accuracy in the electroweak coupling. We consider both polarized and unpolarized electron and positron beams and present results for $\sqrt {s}$ = 240, 365 and 500 GeV, emphasizing contributions where the NLO predictions differ significantly from the leading order results. At NLO, a sensitivity arises to operators that do not contribute at tree level, such as the Higgs tri-linear coupling, CP-violating operators, and dimension-6 operators involving the top quark, among many others. We compare the prospects of future e + e – colliders to explore these new physics effects with existing measurements from the LHC, electron EDMs (for CP violating operators), and Z pole measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Modified equilibrium distributions for Cooper-Frye particlization

We introduce a positive-definite single-particle distribution that is suitable for describing the transition from a macroscopic hydrodynamic to a microscopic kinetic description during the late stages of heavy-ion collisions in the presence of moderately large viscous corrections. The modified equilibrium distribution function can be constructed with hydrodynamic input from either relativistic viscous fluid dynamics or anisotropic fluid dynamics. We test the modified equilibrium distribution's hydrodynamic output for a stationary hadron resonance gas subject to either shear stress, bulk pressure, or baryon diffusion current at a given freeze-out temperature and baryon chemical potential. While it does not reproduce all components of the net baryon current and energy-momentum tensor exactly, it significantly improves upon the customary linearized approximations for the nonequilibrium correction δf n which typically lead to unphysical negative distribution functions at large particle momenta. A comparison of particle spectra and p T –differential elliptic flow coefficients from the Cooper–Frye formula computed with the modified equilibrium distribution and with linearized δf n corrections is presented, for two different (2 + 1)–dimensional hypersurfaces corresponding to central and noncentral Pb + Pb collisions at the Large Hadron Collider (LHC).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Forward rapidity $J/ψ$ production as a function of charged-particle multiplicity in pp collisions at $\sqrt{s}$ = 5.02 and 13 TeV

The production of J/ψ is measured as a function of charged-particle multiplicity at forward rapidity in proton-proton (pp) collisions at center-of-mass energies $\sqrt{s}$ = 5.02 and 13 TeV. The J/ψ mesons are reconstructed via their decay into dimuons in the rapidity interval (2.5 < y < 4.0), whereas the charged-particle multiplicity density (dN ch /dη) is measured at midrapidity (|η| <; 1). The production rate as a function of multiplicity is reported as the ratio of the yield in a given multiplicity interval to the multiplicity-integrated one. This observable shows a linear increase with charged-particle multiplicity normalized to the corresponding average value for inelastic events (dN ch /dη/$\langle$dN ch /dη$\rangle$), at both the colliding energies. Measurements are compared with available ALICE results at midrapidity and theoretical model calculations. First measurement of the mean transverse momentum ($\langle$p T $\rangle$) of J/ψ in pp collisions exhibits an increasing trend as a function of dN ch /dη/$\langle$dN ch /dη$\rangle$ showing a saturation towards high charged-particle multiplicities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Interplaying mechanisms behind inclusive jet R and extraction of jet energy loss distributions

The observed inclusive jet suppression in heavy-ion collisions at LHC has a very weak p T dependence over a large range of p T =50–1000 GeV and is almost independent of the colliding energy, though the initial energy density of the bulk medium has increased from √s=2.76 to 5.02 TeV by about 20%. This interesting phenomenon is investigated in the linear Boltzmann transport (LBT) model for jet propagation in an event-by-event 3+1D hydro background. We show that the p T dependence of jet R AA is determined by the initial spectrum in p+p collisions and p T dependence of jet energy loss. Furthermore, jet energy loss distributions for inclusive jet and γ-jet at both LHC energies are extracted directly from experimental data through the state-of-art Bayesian analysis. Additionally, the averaged jet energy loss has a weak p T dependence and the scaled jet energy loss distributions have a large width, both of which are consistent with the LBT simulations and indicate that jet quenching is caused by only a few out-of-cone jet medium scatterings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗