Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ligands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Synthesis of UO 2 nanoparticles via coulometric titration: influence of electrolytes and ligands on synthesized particle properties

Here, this study investigates the controlled synthesis of uranium oxide nanoparticles (UO 2 NPs) via coulometric titration under ambient conditions, focusing on the impact of electrolyte anions, salt concentrations, and strongly complexing ligands on particle formation and properties. Using dilute solutions of mineral acids (HNO 3 , HCl, and HClO 4 ), we demonstrate that the choice of electrolyte anion affects particle size, polydispersity, and surface charge. Particle characterization using dynamic light scattering and transmission electron microscopy shows that particles synthesized in perchlorate are largest and show a high degree of polydispersity. In comparison, particles synthesized in chloride are smaller and more uniform in size. Synthesis in nitrate yields a wide variety of particle sizes, with the major fraction (>65 %) having a smaller size than that obtained in the other two electrolytes. The presence of more strongly coordinating ligands such as sulfate and acetate modulate hydrolysis and condensation reactions, with sulfate suppressing nanoparticle formation across a wide concentration range ([SO 4 2- ] > 5 mM) and acetate enabling stable colloidal suspensions at [HOAc] ≤ 0.1 M. Synthesis in concentrated electrolytes (2 M NaNO 3 , NaCl, or NaClO 4 ) accelerates reaction kinetics but introduces challenges, as particles showed increased polydispersity and aggregation, and were more prone to oxidation. Electrolyte effects on actinide oxide nanoparticle formation are discussed and a short comparison to established nanoparticle syntheses is drawn. This work underscores the importance of tailoring synthesis parameters to achieve desired nanoparticle properties, providing valuable insights for optimizing UO 2 NP production for various applications.

Actinide hydrolysis↗
DOE OSTI2026

Oxidative Cascade Cyclization of 1,2-Dicyanoarenes by a Dicopper(I,I) Nitrite Complex to Phthalimide Ligands

The reactions of [Cu2(μ–κ 1:κ 1 -O2N)­DPFN]­[NTf2] (1; DPFN = 2,7-bis­(fluoro-di­(2-pyridyl)­methyl)-1,8-naphthyridine, NTf2 – = N­(SO2CF3)2 –) with 1,4-dicyanobenzene and 1,2-dicyanoarenes are discussed. Treatment of 1 with 1,4-dicyanobenzene produces a tetra-Cu­(I) terephthalate complex (2) and dinitrogen via a discrete CN triple bond cleavage at each cyano group. However, reactions of 1 with 1,2-dicyanoarenes appear to proceed via a cascade reaction involving two intertwined CN triple bond activations to yield a series of di-Cu­(I) phthalimides, [Cu2(μ–N­(CO)2(Ar))­DPFN]­[NTf2] (3-(Ar); Ar = 1,2-arylenes C6H4, 3-NO2C6H3, 4-NO2C6H3, 4-PrOC6H3, 3-NC5H3) and dinitrogen. The dicopper phthalimide bonding interaction in these compounds is robust enough to resist protonation by pentafluorophenol and alkylation by methyl triflate or benzyl chloride at the imide nitrogen. This characteristic presents an opportunity for postsynthetic modifications of the phthalimide ligand. Nevertheless, treatment of 3-(C 6 H 4 ) with bistriflimidic acid (HNTf2) results in release of the neutral phthalimide, making the dicopper core available to coordinate other ligands such as nitrite and thus, completing a stoichiometric cycle.

Fernandez, Jose Martinez↗
DOE OSTI2026

Nanocrystal-to-Ligand Interfacial Thermal Transport: Plasmonic Indium Tin Oxide to Perylene Diimide Adsorbates

The generation and dissipation of heat in nanocrystals upon optical excitation is a process which may either limit or enhance their performance in certain applications. Using transient absorption spectroscopy, we tracked the flow of heat from plasmonic tin-doped indium oxide (ITO) nanocrystals to surface adsorbed perylenediimide (PDI) molecules upon excitation of the ITO near-infrared plasmon resonance. Here, we rationalize the derivative line shapes observed in the transient absorption bleach features are the result of thermal transfer from the ITO core to surface ligands based on temperature-dependent static absorption studies of the PDI molecules adsorbed on plasmonic ITO. Through a series of pump power dependent measurements, we demonstrate that the PDI heating time is largely fluence independent at the powers measured, while the overall recovery time increases. Elucidating thermal transfer rates at the nanocrystal and organic ligand interface is key for applications such as plasmon mediated photocatalysis, where heating may obfuscate hot carrier transfer processes.

heat dissipation↗
DOE OSTI2025

Photochemical Ligand-Based CO 2 Reduction Mediated by Ruthenium Formyl Species

Here, a new, ligand-based strategy for CO 2 reduction to formate has been demonstrated. This approach relies on the photochemical generation of a coordinatively saturated transient ruthenium metalloformyl species, Ru-CHO, capable of reducing CO 2 to free formate directly. Under this paradigm, a highly reactive radical cation which is capable of facile formal hydrogen atom transfer (HAT) is generated via reductive quenching of an excited-state photosensitizer. Sequential electron transfer (ET) and HAT steps to a ruthenium carbonyl complex subsequently yield the Ru-CHO species, which upon further reduction undergoes fast hydride transfer to CO 2 , producing free formate. High formate selectivity (up to 98%) and impressive catalytic performance (TON ~5300; TOF ~0.1 s -1 ) was observed. Detailed mechanistic studies revealed that the overall process is highly sensitive to the identity of the radical cation, with divergent reactivity observed when HAT thermodynamics are altered. These findings provide new insights into ligand-based hydride transfer mechanisms and establish a foundation for the rational design of selective CO 2 reduction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Support modification by phosphonic acid ligands controls ethylene hydroformylation on single-atom rhodium sites

To investigate the ability of surface-bound ligands to control activity toward ethylene hydroformylation, we modified site-isolated Rh 1 /TiO 2 with a series of substituted benzyl phosphonic acids. We found that modification of the support by phosphonic acids reduced break-in times for hydroformylation by 4× and increased absolute hydroformylation activity by up to 18× compared to unmodified catalyst at 150 °C. All functionalized catalysts improved hydroformylation activity by at least 9× and improved selectivity by between 7× and 60× relative to the unmodified catalyst. Carbon monoxide probe–molecule spectroscopy indicated that the enhancements in activity among modified samples were due to changes in the local environment of the active Rh site. Specifically, the bite angle of adsorbed carbon monoxide, as determined from infrared spectra, correlated with hydroformylation activity. These findings demonstrate that Rh 1 active sites are highly sensitive to modification of the support with organic ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the influence of ion-pairing on ligand-field excited-state dynamics

Exploration of the photophysical and photochemical properties of transition metal complexes has driven ground-breaking advancements in solar energy conversion technologies, including photoredox catalysis. While significant research has been devoted to understanding excited state properties of second- and third-row transition metal complexes, earth-abundant first-row metal complexes have received comparatively little attention in this context until very recently. In particular, the role of ion-pairing – which has been identified as a potentially significant factor for Ir(III)-based photosensitizers – has not been examined with regard to its influence on the ligand-field excited states that dominate much of first-row photophysics. A key challenge in studying ion-pair interactions lies in quantifying the extent and nature of ion-pairing, particularly in non-aqueous media where the vast majority of photophysical studies are performed. Cobalt(III) polypyridyl complexes provide an attractive platform to address such questions due to their demonstrated potential for applications in photoredox catalysis involving ligand-field excited states. In the present study, we prepared a cobalt(III) polypyridyl complex, [Co(4,4′-OMebpy) 3 ](BAr F 4 ) 3 (where 4,4′-OMebpy is 4,4′-dimethoxy-2,2′-bipyridine and BAr F 4 is tetrakis(3,5-bis(trifluoromethyl)-phenyl)borate) to probe ion-pairing in non-aqueous solutions. Specifically, analysis of data acquired from both variable-temperature diffusion ordered spectroscopy (DOSY) NMR and 1-D rotating-frame nuclear Overhauser effect (ROE) experiments allowed us to identify and differentiate between solvent-separated ion pairs in high-dielectric media and contact ion pairs in a low-dielectric solvent. Time-resolved absorption spectroscopy was then used to measure ground-state recovery dynamics under these varying conditions of ion-pairing, the results of which revealed an increase in excited-state lifetime for contact ion-pairs that we suggest arises from a reduction in outer-sphere reorganization energy relative to conditions which favored solvent-separated ion pairs. We believe this study demonstrates that one can leverage broadly available NMR-based methods to understand ion-pairing in non-aqueous solutions, which in turn can provide a microscopic picture of intermolecular interactions that can impact the photophysical properties of transition metal-based chromophores.

Ghosh, Atanu [Michigan State University, East Lans↗
DOE OSTI2025

Experimental electronic structures of the Fe IV =O bond in S=1 heme vs. nonheme sites: Effect of the porphyrin ligand

High-valent Fe IV =O species are common intermediates in biological and artificial catalysts. Heme and nonheme S=1 Fe IV =O sites have been synthesized and studied for decades but little quantitative experimental comparison of their electronic structures has been available, due to the lack of direct methods focused on the iron. This study allows a rigorous determination of the electronic structure of a nonheme Fe IV =O center and its comparison to an Fe IV =O heme site using 1s2p resonant inelastic X-ray scattering (RIXS) and Fe L-edge X-ray absorption spectroscopy (XAS). Further, variable temperature magnetic circular dichroism (VT-MCD) of the ligand field transitions, combined with nuclear resonance vibrational spectroscopy of the two S=1 Fe IV =O systems show that the equatorial ligand field decreases from a nonheme to a heme Fe IV =O site. Alternatively, RIXS and Fe L-edge XAS combined with MCD show that the Fe dπ orbitals are unperturbed in the Fe IV =O heme relative to the nonheme site because the strong axial Fe-O bond uncouples the Fe dπ orbitals from the porphyrin π-system. As a consequence, the thermodynamics and kinetics of the H-atom abstraction reactions are actually very similar for heme compound II and nonheme Fe IV =O active sites.

bioinorganic chemistry↗
DOE OSTI2024

Enhanced nucleation mechanism in ruthenium atomic layer deposition: Exploring surface termination and precursor ligand effects with RuCpEt(CO)2

Miniaturization of microelectronic devices necessitates atomic precision in manufacturing techniques, particularly in the deposition of thin films. Atomic layer deposition (ALD) is recognized for its precision in controlling film thickness and composition on intricate three-dimensional structures. This study focuses on the ALD nucleation and growth mechanisms of ruthenium (Ru), a metal that has significant future implications for microelectronics. Despite its advantages, the deposition of a high surface-free energy material like Ru on a low surface-free energy material such as an oxide often faces challenges of large nucleation delays and non-uniform growth. To address these challenges, we explored the effectiveness of organometallic surface pretreatments using trimethylaluminum (TMA) or diethylzinc (DEZ) to enhance Ru film nucleation and growth. Our study employed a less-studied Ru precursor, cyclopentadienylethyl(dicarbonyl)ruthenium [RuCpEt(CO)2], which demonstrated promising results in terms of reduced nucleation delay and increased film continuity. Ru ALD was performed on silicon substrates with native oxide, using RuCpEt(CO)2 and O2 as coreactants. Our findings reveal that surface pretreatment significantly improves nucleation density and film thickness within the initial 60 ALD cycles, achieving up to a 3.2-fold increase in Ru surface coverage compared to nonpretreated substrates. Supported by density functional theory calculations, we propose that the enhanced nucleation observed with RuCpEt(CO)2 compared to previously-studied Ru(Cp)2 is due to two key mechanisms: the facilitated removal of CO ligands during deposition, which enhances the reactivity of the precursor, and a hydrogen-abstraction reaction involving the ethyl ligand of RuCpEt(CO)2 and the metal-alkyl groups on the surface. This study not only advances our understanding of Ru ALD processes but also highlights the significant impact of precursor chemistry and surface treatments in optimizing ALD for advanced microelectronic applications.

Materials Science↗
DOE OSTI2025

Neptunium (V) Solubility in WIPP Brine: Presence and Absence of WIPP-Relevant Organic and Inorganic Ligands

The oxidation state and solubility of neptunium (Np) in 5 M NaCl and high ionic strength synthetic WIPP (Waste Isolation Pilot Plant) brines were systematically investigated as a function of pCH+ (7-11) in the presence and absence of WIPP-relevant organic ligands, including EDTA (Ethylenediaminetetraacetic acid), oxalate, citrate, and acetate, as well as inorganic ligands such as borate and carbonate at a temperature of 23 ± 2°C. This study was conducted through long-term batch solubility experiments spanning approximately 950 days, using an undersaturation approach. A comprehensive set of experimental and spectroscopic techniques, including UV-VIS-NIR spectroscopy and Np L III -edge X-ray Absorption Spectroscopy (XAS), was employed to identify the solubility-controlling Np solid phases and the predominant aqueous Np species present in the samples.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Lone Pairs of Carbogenic Center Enable Thermally Activated Delayed Fluorescence from Carbon to Ligand Charge Transfer Excited States

Carbogenic compounds of the type L→C(0)←L, where L represents various ligands such as phosphines or carbenes, and C(0) denotes zerovalent carbon with two orthogonal lone pairs, are widely utilized in organic and coordination chemistry; however, in-depth photophysical and optical properties remain largely unknown. In the following work, we report detailed luminescent properties of one of the most prominent examples of carbogenic compounds, hexaphenylcarbodiphosphorane (CDP). Combined spectroscopic/TD-DFT studies demonstrate that both lone pairs of CDP participate in the observed visible light absorption and emission, which are associated with carbon lone pairs π*(PPh3) carbon to ligand charge transfer states (CLCTs). The CLCT exhibits a considerably decoupled electron-hole pair, resulting in a small S1-T1 gap and thermally assisted delayed fluorescence (TADF). Moreover, two lone pairs teamed up around C(0) provide numerous close-lying σ- and π-CLCT singlet and triplet states, which allow, for organic TADF emitters, extremely fast rates of exergonic intersystem crossing up to 1.27×109 s-1, competitive with some 3d and 4d metal-based TADF luminophores. These results open fresh directions for innovative design of novel luminescent materials for high-end photonic applications, utilizing lone pairs of carbogenic centers as donors of electron density in the excited states.

Mrózek, Ondřej [University of Southern California]↗
NASA NTRS1990

Affinity Electrophoresis Using Ligands Attached To Polymers

In new technique, reduction of electrophoretic mobilities by addition of polyethylene glycol to ligands increases electrophoretic separabilities. In immuno-affinity electrophoresis, modification of ligands extends specificity of electrophoretic separation to particles having surface electric-charge structures otherwise making them electrophoretically inseparable. Modification of antibodies by polyethylene glycol greatly reduces ability to aggregate while enhancing ability to affect electrophoretic mobilities of cells. In hydrophobic-affinity electrophoresis, addition of polyethylene glycol reduces tendency toward aggregation of cells or macromolecules.

Van Alstine, James M.↗
NASA NTRS1991

Al(+)-ligand binding energies

Ab initio calculations are used to optimize the structure and determine the binding energies of Al(+) to a series of ligands. For Al(+)-CN, the bonding was found to have a large covalent component. For the remaining ligands, the bonding is shown to be electrostatic in origin. The results obtained for Al(+) are compared with those previously reported for Mg(+).

Sodupe, M.↗
NASA NTRS1992

Calculation of Mg(+)-ligand relative binding energies

The calculated relative binding energies of 16 organic molecules to Mg(+) are compared with experimental results where available. The geometries of the ligands and the Mg(+)-ligand complexes arc optimized at the self-consistent field level using a 6-31G* basis set. The Mg(+) binding energies are evaluated using second-order perturbation theory and basis sets of triple-sigma quality augmented with two sets of polarization functions. This level of theory is calibrated against higher levels of theory for selected systems. The computed binding energies are accurate to about 2 kcal/mol.

Partridge, Harry↗
DOE OSTI2025

Synthesis of Sandwich-α-Diimine Ligands via Copper-Mediated Stille Coupling

While sandwich diimines have found use in transition metal catalysis, the general method for their preparation has been lacking. Here, this approach utilizes a copper-mediated Stille-type coupling between aryl stannanes and α-diimines bearing 8-bromonaphthylimino group in commercial-grade N,N-dimethylformamide solvent and employs CuI or thiophene-2-carboxylate to promote the reactions. No other additives or bases are required. Electron-poor, electron-rich, heterocyclic, and hindered aryl stannanes can be employed as coupling reagents. Ligand scaffolds derived from structurally diverse α-diketones can be used.

Catalysts↗
DOE OSTI2025

The [M 6 (S 2 C 2 Ph 2 ) 6 ] (M = Ni, Pd, Pt) Series: Multielectron Reservoirs That Sustain Ligand-Based Oxidations and Metal-Based Reductions

A complete [M 6 (S 2 C 2 R 2 ) 6 ] series (M = Ni (1), Pd (2), Pt (3); R = Ph), the rarest variety among homoleptic dithiolene transition-metal compounds, has been prepared by reaction between [M(S 2 C 2 Ph 2 ) 2 ] and a M 0 source. The platinum member of this set is the first of its type. Diffraction-quality crystals, grown with high reproducibility by evaporation from PhNO 2 solutions, reveal fully reduced [Ph 2 C 2 S 2 ] 2– dianions and an octahedral M 6 core that is reduced to C 2 symmetry by the fusion of a mononuclear D 2h [M(S 2 C 2 Ph 2 ) 2 ] fragment upon a C 4 -symmetric base. The [Ni 6 (S 2 C 2 Ph 2 ) 2 ] 1– monoanion, prepared by Cp* 2 Co reduction, shows only modest structural differences from its neutral counterpart. In CH 2 Cl 2 , 1 and 2 can undergo two reductions and an oxidation, while 3 sustains two reductions and two oxidations. In benzonitrile, 1 sustains three reversible oxidations at potentials that are shifted appreciably to less positive values. The cathodic processes are shown by density functional theory (DFT) calculations to involve an MO largely of metal–sulfur composition that has contributions throughout the C 4 -symmetric pentametallic base of the assembly, while the oxidations are largely ligand-based and confined to the monometallic [M(S 2 C 2 Ph 2 ) 2 ] cap. The absorption spectra are marked by multiple overlapping bands that produce a continuous, tapering absorption profile of unresolved shoulders and swells.

Ligands↗
DOE OSTI2025

Atomic Orbital Energy Matching vs Overlap in Actinide-Ligand Dative Bonding

Prebonding conditions and dative bond formation in actinide(IV)hexachloride complexes with U, Np, and Pu are studied by density functional theory (DFT) calculations, focusing on the interplay of atomic orbital (AO) overlap and AO energy matching in the formation of molecular orbitals (MOs) and the subsequent identification of dative bonds. The extent of donation is tracked via population analysis, MO localization, and bond-order criteria. DFT Fock matrices are used to setup models in which varying numbers of valence AOs interact to form dative bonds. The results confirm, among other effects, a contribution to metal−ligand covalency from the actinide (An) 6p shell. Better matching of An(5f) and Cl(3p) energies occurs as the An(5f) level stabilizes with increasing An effective nuclear charge. A near-degeneracy occurs in the case of the α-spin orbitals of the Pu system, but it is inconsequential. Altogether, better AO energy matching for An(5f) and Cl(3p) along the series U, Np, Pu is counter-balanced by decreasing AO overlap and decreasing availability of 5f acceptor orbitals, leading to similar bond orders and extents of donation in the three systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Convergent Protocols for Computing Protein–Ligand Interaction Energies Using Fragment-Based Quantum Chemistry

Fragment-based quantum chemistry methods offer a way to sidestep the steep nonlinear scaling of electronic structure calculations so that large molecular systems can be investigated using high-level methods. Here, we use fragmentation to compute protein–ligand interaction energies in systems with several thousand atoms, using a new software platform for managing fragment-based calculations that implements a screened many-body expansion. Convergence tests using a minimal-basis semiempirical method (HF-3c) indicate that two-body calculations, with single-residue fragments and simple hydrogen caps, are sufficient to reproduce interaction energies obtained using conventional supramolecular electronic structure calculations, to within 1 kcal/mol at about 1% of the computational cost. We also demonstrate that the HF-3c results are illustrative of trends obtained with density functional theory in basis sets up to augmented quadruple-ζ quality. Strategic deployment of fragmentation facilitates the use of converged biomolecular model systems alongside high-quality electronic structure methods and basis sets, bringing ab initio quantum chemistry to systems of hitherto unimaginable size. This will be useful for generation of high-quality training data for machine learning applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗