Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lan”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates

This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m –1 K –1 . Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-order multirate explicit time-stepping schemes for the baroclinic-barotropic split dynamics in primitive equations

In order to treat the multiple time scales of ocean dynamics in an efficient manner, the baroclinic-barotropic splitting technique has been widely used for solving the primitive equations for ocean modeling. Based on the framework of strong stability-preserving Runge-Kutta approach, we propose two high-order multirate explicit time-stepping schemes (SSPRK2-SE and SSPRK3-SE) for the resulting split system in this paper. The proposed schemes allow for a large time step to be used for the three-dimensional baroclinic (slow) mode and a small time step for the two-dimensional barotropic (fast) mode, in which each of the two mode solves just need to satisfy their respective CFL conditions for numerical stability. Specifically, at each time step, the baroclinic velocity is first computed by advancing the baroclinic mode and fluid thickness of the system with the large time-step and the assistance of some intermediate approximations of the barotropicmode obtained by substepping with the small time step; then the barotropic velocity is corrected by using the small time step to re-advance the barotropic mode un-der an improved barotropic forcing produced by interpolation of the forcing terms from the preceding baroclinic mode solves; lastly, the fluid thickness is updated by coupling the baroclinic and barotropic velocities. Additionally, numerical inconsistencies on the discretized sea surface height caused by the mode splitting are relieved via a reconciliation process with carefully calculated flux deficits. Here, two benchmark tests from the “MPAS-Ocean” platform are carried out to numerically demonstrate the performance and parallel scalability of the proposed SSPRK-SE schemes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Insights into Ti doping for stabilizing the Na 2/3 Fe 1/3 Mn 2/3 O 2 cathode in sodium ion battery

Iron- and manganese-based layered metal oxides, as cathodes for sodium ion batteries, have received widespread attention because of the low cost and high specific capacity. However, the Jahn-teller effect of Mn 3+ ions and the resulted unstable structure usually lead to continuously capacity decay. Herein, Titanium (Ti) has been successfully doped into Na 2/3 Fe 1/3 Mn 2/3 O 2 to suppress the Jahn-Teller distortion and improve both cycling and rate performance of sodium ion batteries. In situ high-energy synchrotron X-ray diffraction study shows that Ti-doped compound (Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 ) can maintain the single P2 phase without any phase transition during the whole charging/discharging process. Further, various electrochemical characterizations are also applied to explore the better kinetics of sodium ions transfer in the Na 2/3 Fe 1/3 Mn 0.57 Ti 0.1 O 2 . This work provides a comprehensive insight into the Ti-doping effects on the performance from both structural and electrokinetic perspectives.

25 ENERGY STORAGE↗
DOE OSTI2022

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Quantifying the effects of urbanization on floods in a changing environment to promote water security — A case study of two adjacent basins in Texas

The increased occurrence of flood events resulting from urbanization and global climate change is a great threat to water security. To systematically evaluate the impacts of urbanization on floods, here we applied a paired catchments approach to two adjacent river basins in south-central Texas — the San Antonio River Basin (SARB), with fast urbanization; and the Guadalupe River Basin (GRB), with little land cover change. A physics-based distributed hydrological model — the Distributed Hydrology Soil Vegetation Model, embedded with a multi-purpose reservoir module (DHSVM-Res) — was used to simulate streamflow and reservoir storage. The simulations were conducted under different land cover scenarios, including a newly developed continuous land cover series (CLCS). Holistic analyses were then conducted for the paired basins using three methods: analyzing the selected flood events, detecting change points (CP) of monthly floods, and testing the elasticity of long-term flood regimes. The results suggest that: (1) urbanization may reduce lag time and elevate flood peaks significantly by 3–30% in our study area; (2) when there is little land cover change, changing climate is the major driver of variations in the monthly maximum streamflow (MMS); (3) fast urbanization can amplify streamflow variability, increase MMS significantly, and thus alter the timing of CP; and (4) the mean MMS of observed streamflow in the SARB has increased by as much as 75.7% from the pre-CP to post-CP periods. This comprehensive study fills in a gap in our current understanding of the isolated impacts of urbanization on flooding and is expected to support future explorations of anthropogenic influences on floods.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Tracking snowmelt during hydrological surface processes using a distributed hydrological model in a mesoscale basin on the Tibetan Plateau

We report that mountain snowpack is an important water resource for the high altitude and latitude regions where the terrain is complex. However, the snowmelt pathway and its actual contribution to streamflow and soil moisture are rarely reported and remain unclear in such regions. To fill in this knowledge gap, we incorporate a snowmelt pathway tracking algorithm to a high-resolution physics-based distributed-hydrology-soil-vegetation model (DHSVM), to track snowmelt movement and quantify snowmelt contributions in the surface hydrologic processes. A simple reservoir operation scheme is also incorporated in the model. The modified model is applied to a dammed meso-scale watershed in the northeast Tibetan Plateau, China to study the snow and reservoir effects. The results show that annual snow contribution to soil moisture (SC-SM) and snow contribution to streamflow (SC-S) significantly decrease over 1965-2019. At a monthly scale, SC-SM has the largest amplitude at the top soil layer and its peak in the deeper layer lags behind the upper layer, and mean monthly SC-S at all stations show bimodal distributions corresponding to snowfall season. Reservoir regulation has subtle impacts (≤2.0%) on SC-S. If the current climate change rate continues, monthly and annual streamflow at the outlet will decrease primarily due to snowpack reduction. To mitigate climate change impacts, better water resource management is needed in this watershed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Anion photoelectron spectroscopic and relativistic coupled-cluster studies of uranyl dichloride anion, UO 2 Cl 2 –

A joint relativistic coupled-cluster and experimental photoelectron (PE) spectroscopic study of the uranyl dichloride anion, UO 2 Cl 2 – , is reported. Sophisticated electronic-structure calculations predict the photodetachment of UO 2 Cl 2 – to involve a U 5f electron and to be followed by significant geometry relaxation. Therefore, the adiabatic electron affinity (EA a ) of the uranyl dichloride neutral molecule, UO 2 Cl 2 , and the vertical detachment energy (VDE) of its anion, UO 2 Cl 2 – , provide valuable information about its uranium 5f orbital energies. The EA a value was computed to be 3.15 eV. The VDE value was calculated to be 3.55 eV by augmenting the computed EA a with a shift derived from a Franck–Condon simulation using coupled-cluster potential energy surfaces. Here, the VDE, which corresponds to the highest intensity peak in the PE spectrum, was measured to be 3.69 ± 0.20 eV, in good agreement with the computed value. The origin transition in the PE spectrum, whose electron binding energy corresponds to the EA a , was assigned to the feature at 3.2 ± 0.20 eV, consistent with the computed EA a .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

In situ study on medium-range order evolution during the polyamorphous phase transition in a Pd-Ni-P nanostructured glass

Engineering multiscale structural hierarchies in glassy alloys enable a broad spectrum of potential applications. Metallic glasses were born in hierarchical structures from atomic-to-nanometer scales. However, the frozen-in structures in traditional metallic glasses prepared by rapid quenching techniques are challenging to tailor. Here, we show that a Pd 40 Ni 40 P 20 bulk nanostructured glass of polyamorphous interfacial structures was prepared by inert-gas condensation with a laser evaporation source, and its multiscale structures could be engineered. In-situ scattering experiment results reveal polyamorphous phase transitions occurred in the interfacial regions, which are accompanied by the evolution of medium-range order and the nanoscale heterogeneous structures during the condensation process of glassy nanoparticles under high pressure and the following heating process. Moreover, changes in the cluster connectivity resulting from repacking of the local ordering induced by pressure and temperature could be observed. The thermophysical and mechanical properties, including boson peaks, hardness, and elasticity modulus, could be changed as a function of heat-treatment parameters. In conclusion, our findings would shed light on the synthesis of bulk nanostructured glassy alloys with tailorable thermodynamic and dynamical behavior as well as mechanical properties based on the understanding of metastability for polyamorphous interfacial phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Features of relaxation modes in soft magnetic metallic glasses and their correlation with magnetic ordering

Although the anneal-induced relaxation process of Fe-based metallic glasses has been widely reported, there is a lack of a systematic description of the relaxation modes of atoms. Here, in this work, the relaxation modes of FeSiBPC metallic glasses and their relationship with magnetic ordering have been investigated. A two-stage relaxation behavior has been observed, and the pinning effect of Curie temperature is found in the first stage. The short-range ordering involved in the β relaxation in the first stage is confined and facilitated by magnetic ordering. It causes a smaller E β compared to that of non-magnetic metallic glasses. In the second stage, the pinning effect disappears. It is mainly the medium-range rearrangements involved in α relaxation that begins to yield the influence on magnetic ordering. This work uncovers the inner magnet-influenced β relaxation in Fe-based metallic glasses and provides insights into the interaction between structural arrangement during relaxation and magnetic ordering.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A study on texture stability and the biaxial creep behavior of as-hydrided CWSR Zircaloy-4 cladding at the effective stresses from 55 MPa to 65 MPa and temperatures from 300°C to 400°C

The creep rupture of high burnup used nuclear fuel (> 45 GWD/MTU) cladding is regarded as one of the failure mechanisms during long-term dry storage. A high amount of zirconium hydride in the cladding matrix would degrade the mechanical properties of the cladding especially leading to delayed hydride cracking. To better understand the influence of zirconium hydride on the biaxial thermal creep performance and the crystalline texture stability of Zircaloy-4 cladding, the pressurized tube technique is applied to test the durability of the as-hydrided material. Tests were performed on as-received Zircaloy-4 tubular specimens as well as-hydrided ones with targeted 300 wt parts per million (wppm) or 750 wppm hydrogen. The biaxial creep experiments were conducted at temperatures from 300 degrees C to 400 degrees C and at equivalent stresses at mid-wall from 55 MPa to 65 MPa. The hydridation process prior to creep tests induces the formation of FCC delta-hydride platelets along the circumferential direction of the tube. This alignment and phase structure of hydride show no significant change after biaxial creep tests. The creep strain-rate negatively depends on the hydrogen content. The synchrotron wide-angle X-ray diffraction (WAXD) technique and electron backscatter diffraction (EBSD) analysis were applied for the study of the crystallographic orientation relationship. zirconium-to-hydride grain orientation follows Shoji-Nishiyama crystallographic relationship. This relationship is stable before and after creep deformation. These results of creep performance and texture stability of Zircaloy-4 claddings can help support the design basis of interim and long-term dry storage facilities.

creep↗
DOE OSTI2024

Manufacturing Oxide Dispersion Strengthened (ODS) steel plate via cold spray and friction stir processing

Oxide dispersion strengthened (ODS) steels, traditionally fabricated by ball milling and conventional powder metallurgy techniques to achieve bulk form, followed by intricate rolling and thermal treatment steps to achieve plate or sheet form. Here, we present a novel processing route that combines cold spray (CS) with friction stir processing (FSP) to manufacture ODS steel plate directly from gas atomization reaction synthesis (GARS)-prepared powder, thus no rolling steps involved. Microstructural and mechanical characterizations were performed to assess the quality and properties of the resulting ODS steel plate. Our findings demonstrate that the slightly porous CS deposited layer was fully consolidated after FSP, yielding a fully dense ODS steel plate that exhibited a favorable tradeoff between strength and ductility upon extraction from the substrate. Furthermore, through microstructural analysis, we revealed the presence of an appreciable density (∼10 22 /m 3 ) of nano-sized oxide particles, with the majority being smaller than 5 nm via the combined CS + FSP fabrication route. This work serves as a first proof-of-concept demonstration of the manufacturing approach described herein, offering a possible alternative route for producing ODS steel plates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pectin methyltransferase QUASIMODO2 functions in the formation of seed coat mucilage in Arabidopsis

Pectin, cellulose, and hemicelluloses are major components of primary cell walls in plants. In addition to cell adhesion and expansion, pectin plays a central role in seed mucilage. Seed mucilage contains abundant pectic rhamnogalacturonan-I (RG-I) and lower amounts of homogalacturonan (HG), cellulose, and hemicelluloses. Previously, accumulated evidence has addressed the role of pectin RG-I in mucilage production and adherence. However, less is known about the function of pectin HG in seed coat mucilage formation. In this study, we analyzed a novel mutant, designated things fall apart2 (tfa2), which contains a mutation in HG methyltransferase QUASIMODO2 (QUA2). Etiolated tfa2 seedlings display short hypocotyls and adhesion defects similar to qua2 and tumorous shoot development2 (tsd2) alleles, and show seed mucilage defects. Here, the diminished uronic acid content and methylesterification degree of HG in mutant seed mucilage indicate the role of HG in the formation of seed mucilage. Cellulosic rays in mutant mucilage are collapsed. The epidermal cells of seed coat in tfa2 and tsd2 display deformed columellae and reduced radial wall thickness. Under polyethylene glycol treatment, seeds from these three mutant alleles exhibit reduced germination rates. Together, these data emphasize the requirement of pectic HG biosynthesis for the synthesis of seed mucilage, and the functions of different pectin domains together with cellulose in regulating its formation, expansion, and release.

59 BASIC BIOLOGICAL SCIENCES↗