Engineering PapersSearch

SEARCH · Engineering Papers

Results for “interferometric”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Remote sensing of ocean wave spectra by interferometric synthetic aperture radar

Ocean surface waves can be clearly observed by SAR in the interferometric configuration (INSAR) due to the ability of INSAR to provide images of the local surface velocity field. It is shown here that INSAR can be used to obtain wavenumber spectra that are in agreement with power spectra measured in situ. This new method has considerable potential to provide instantaneous spatial information about the structure of ocean wave fields.

Marom, M.

First high spatial resolution interferometric observations of solar flares at millimeter wavelengths

The first high spatial resolution interferometric observations of solar flares at millimeter wavelengths, carried out with the Berkeley-Illinois-Maryland Array are presented. The observations were made at 3.3 mm wavelength during the very active periods of March 1989, using one or three baselines with fringe spacings of 2-5 arcsec. The observations represent an improvement of an order of magnitude in both sensitivity and spatial resolution compared with previous solar observations at these wavelengths. It appears that millimeter burst sources are not much smaller than microwave sources. The most intense bursts imply brightness temperatures of over 10 to the 6th K and are due to nonthermal gyrosynchrotron emission or possibly thermal free-free emission. If the emission in the flash phase is predominantly due to gyrosynchrotron emission, thermal gyrosynchrotron models can be ruled out for the radio emission because the flux at millimeter wavelengths is too high.

Kundu, M. R.

Information content of interferometric delay-rate measurements for planetary orbiter navigation

Spacecraft such as Magellan and Mars Observer will use earth-based interferometric delay-rate tracking to meet their navigation requirements. Examples of methods used to implement these measurements are Differenced One-Way Doppler, delta-Differenced One-Way Doppler, and Two-Way Minus Three-Way Doppler. These measurements have a greater capability to observe certain orbital elements than that possessed by two-way Doppler, which has been the sole data type used in all U.S. planetary orbiter missions to date. In this paper, an approximate analytic model is developed for delay-rate measurements, as a function of classical orbital elements. The resulting expressions are used to show how the information content of these data types varies with orbit size, shape, and orientation. Comparison is made with the information content of Doppler data, using orbital element sets derived from the Magellan and Mars Observer missions. Results indicate that navigation accuracy improvements obtained by augmenting Doppler data with delay-rate measurements are greatest for spacecraft in low-altitude circular orbits; but decrease steadily for orbits of progressively greater size and eccentricity. The differences in Doppler-only and Doppler plus delay-rate orbit determination accuracies were also found to be highly dependent on Doppler measurement accuracy.

Thurman, Sam W.

Two-Wavelength Interferometric Keratometer

Proposed interferometric keratometer measures shapes of corneas without touching them. Used to test strongly aspherical optics. Resembling present commercial lens-testing interferometers, generates interferograms representative of deviation of surfaces under test from sphericity. Such interferograms used to generate contour maps of surfaces. Measures corneal topography to diameters as large as 12 mm.

Hochberg, Eric

Improving Sparse-Aperture Interferometric Radiometry

Proposed method for designing spatial arrangement of antennas of sparse-aperture interferometric radiometry (SAIR) system increases spatial resolution of images produced by system. Technique involves cross-correlation of signals received by pairs of small antennas at different locations. Includes ring array of "flood-beam" antennas. Signals from all possible pairs of antennas cross-correlated simultaneously. Diameter of ring determines spatial resolution of image, and distribution of antennas around ring determines sampling characteristics. Conceived to improve proposed remote-sensing SAIR system placed in geosynchronous orbit; also applied to other SAIR systems intended to stare at stationary targets for relatively long times.

Ruf, Christopher S.

Improved Interferometric Photorefractive Optical Processor

Processing speed increased substantially. Improved optical interferometric image-processing scheme based on four-wave mixing via photorefractive effect in GaAs or InP. Gives rise to index-of-refraction gratings acting as phase-conjugate mirrors: interactions among four input beams generate wave-front-reversed replicas of two of these beams. Each phase-conjugate beam travels precisely back along path of corresponding input beam, regardless of angle of incidence. Any distortions introduced into input beam during forward propagation removed from phase-conjugate beam during backward propagation.

Cheng, Li-Jen

Second catalog of interferometric measurements of binary stars (McAlister and Hartkopf 1988): Documentation for the machine-readable version

The machine-readable version of the catalog, as it is currently being distributed from the Astronomical Data Center, is described. The catalog is a compilation of measurements of binary- and multiple-star systems obtained by speckle interferometric techniques; this version supersedes a previous edition of the catalog published in 1985. Stars that have been examined for multiplicity with negative results are included, in which case upper limits for the separation are given. The second version is expanded from the first in that a file of newly resolved systems and six cross-index files of alternate designations are included. The data file contains alternate identifications for the observed systems, epochs of observation, reported errors in position angles and separation, and bibliographical references.

Warren, Wayne H., Jr.

Detection of in-plane displacements of acoustic wave fields using extrinsic Fizeau fiber interferometric sensors

Quantitative measurements of the in-plane particle displacement components of ultrasonic surface acoustic wave fields using extrinsic Fizeau fiber interferometric (EFFI) sensors are reported. Wave propagation in materials and the fiber sensor elements are briefly discussed. Calibrated experimental results obtained for simulated acoustic emission events on homogeneous metal test specimens are reported and compared to previous results obtained using piezoelectric transducers.

Dhawan, R.

Miniaturized fiber-optic Michelson-type interferometric sensors

A novel, miniaturized Michelson-type fiber-optic interferometric sensor that is relatively insensitive to temperature drifts is presented. A fused-biconical tapered coupler is cleaved immediately after the coupled length and polished down to the region of the fused cladding, but short of the interaction region. The end of one core is selectively coated with a reflective surface and is used as the reference arm; the other core serves as the sensing arm. The detection of surface acoustic waves, microdisplacements, and magnetic fields is reported. The sensor is shown to be highly stable in comparison to a classic homodyne, uncompensated Michelson interferometer, and signal-to-noise ratios of 65 dB have been obtained.

Murphy, Kent A.

New approaches in interferometric SAR data processing

It is well established that interferometric synthetic aperture radar (SAR) images can be inverted to perform surface elevation mapping. Among the factors critical to the mapping accuracy are registration of the interfering SAR images and phase unwrapping. A novel registration algorithm is presented that determines the registration parameters through optimization. A new figure of merit is proposed that evaluates the registration result during the optimization. The phase unwrapping problem is approached through a new method involving fringe line detection. The algorithms are tested with two SEASAT SAR images of terrain near Yellowstone National Park. These images were collected on Seasat orbits 1334 and 1420, which were very close together in space, i.e., less than 100 m. The resultant elevation map is compared with the USGS digital terrain elevation model.

Lin, Qian

Errors In Synthetic-Aperture Interferometric Radiometry

Report presents analysis of errors in image of scene reconstructed from output of synthetic-aperture interferometric radiometer (SAIR). Receiving at typical frequency of 1.4 GHz, SAIR is airborne or spaceborne instrument including several antennas aimed at nadir and arrayed along line perpendicular to trajectory, such that antennas scan swath along ground track in "pushbroom" fashion. Streaks in reconstructed scene partly removed by image-enhancement techniques.

Ruf, Christopher S.

Radio and optical interferometric imaging

Since diffraction-limited imaging with a single aperture yields angular resolution approx. lambda/D, the attainment of high angular resolution with single apertures requires the construction of correspondingly large monolithic apertures, the whole surface of which must be figured to much less than a wavelength. At the longer wavelengths, it is impossible to build a sufficiently large single aperture: for example, at lambda 21 cm, arcsec resolution requires an aperture of diameter approx. 50 km. At the shorter wavelengths, the atmosphere imposes a natural limit in resolution of about one arcsec. However, another route is possible; that is, using synthetic apertures to image the sky. Synthetic apertures are now in use in many fields, e.g., radio interferometry, radar imaging, and magnetic-resonance imaging. Radio-interferometric techniques developed in radio astronomy over the past 40 years are now being applied to optical and IR astronomical imaging by a number of groups. Furthermore, the problem of figuring synthetic apertures is considerably simpler, and can be implemented in a computer: new 'self-calibration' techniques allow imaging even in the presence of phase errors due to the atmosphere.

Cornwell, Tim J.

Interferometric tracking system for the tracking and data relay satellite

This report documents construction and testing of the Interferometric Tracking System project developed under the NASA SBIR contract NAS5-30313. Manuals describing the software and hardware, respectively entitled: 'Field Station Guide to Operations' and 'Field Station Hardware Manual' are included as part of this final report. The objective of this contract was to design, build, and operate a system of three ground stations using Very Long Baseline Interferometry techniques to measure the TDRS orbit. The ground stations receive signals from normal satellite traffic, store these signals in co-located computers, and transmit the information via phone lines to a central processing site which correlates the signals to determine relative time delays. Measurements from another satellite besides TDRS are used to determine clock offsets. A series of such measurements will ultimately be employed to derive the orbital parameters, yielding positions accurate to within 50 meters or possibly better.

Effland, John E.

Decorrelation in interferometric radar echoes

A radar interferometric technique for topographic mapping of surfaces promises a high resolution, globally consistent approach to generation of digital elevation models. One implementation approach, that of utilizing a single SAR system in a nearly repeating orbit, is attractive not only for cost and complexity reasons but also in that it permits inference of changes in the surface over the orbit repeat cycle from the correlation properties of the radar echoes. The various sources contributing to the echo correlation statistics are characterized, and the term which most closely describes surficial change is isolated. There is decorrelation increasing with time, but digital terrain model generation remains feasible.

Zebker, Howard A.

Metrology of X-ray optics utilizing shearing interferometric techniques

This paper will discuss the optical testing of extreme grazing incidence mirror systems and normal incidence high-precision mirror systems during fabrication processing of the optical substrates. The optical metrology is closely coupled with an advanced material removal process which will be discussed in terms of the optical metrology. Interferometric data will be presented of the optical surfaces. Surface roughness data will be shown and discussed.

Baker, Phillip C.

Laser holographic interferometric measurements of the flow behind a rearward facing step

A holographic interferometer has been designed, constructed, and evaluated in an experimental study of the supersonic flow over a rearward facing step. The nominal Mach number at the corner was 2.05 +/- 0.04 and the Reynolds number per inch was 11.9 x 10 exp 6. The holographic interferometric measurements were supplemented by classical measurements of surface pressure, oil flow, and schlieren visualization. The effects of step height and step width were examined. A method to determine the reattachment point from the interferograms was examined and found to be in good agreement with the other measurement techniques. The reattachment point moved closer to the step as the step height was decreased, but its location did not change with varying step width. In addition to providing surface data for the flow over a rearward facing step, this study provides quantitative off-surface density data and Mach number data throughout the flow, obtained from the holographic interferometry measurements, which are suited for code validation.

Leonard, Rachel

Fiber-optic interferometric acoustic sensors for wind tunnel applications

Progress in developing fiber-optic interferometric sensors for aeroacoustic measurements in wind tunnels, performed under the NASA program, is reported. Preliminary results show that the fiber-optic interferometer sensor array is a powerful instrument for solving complex acoustic measurement problems in wind tunnels, which cannot be resolved with the conventional transducer technique.

Cho, Y. C.