Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interfacial engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Molecular Assembly-Induced Charge Transfer for Programmable Functionalities

The donor–acceptor interface within molecular charge transfer (CT) solids plays a vital role in the hybridization of molecular orbitals to determine their carrier transport and electronic delocalization. In this study reported herein, we demonstrate molecular assembly-driven bilayer and crystalline solids, consisting of electron donor dibenzotetrathiafulvalene (DBTTF) and acceptor C 60 , in which interfacial engineering-induced CT degree control is a key parameter for tuning its optical, electronic, and magnetic performance. Compared to the DBTTF/C 60 bilayer structure, the DBTTFC 60 cocrystalline solids show a stronger degree of charge transfer for broad CT absorption and a large dielectric constant. In addition, the DBTTFC 60 cocrystals exhibit distinct CT arrangement-driven anisotropic electron mobility and spin characteristics, which further enables the development of high-penetration and high-energy $γ$-ray photodetectors. The results presented in this paper provide a basis for the design and control of molecular charge transfer solids, which facilitates the integration of such materials into molecular electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Electrode with Sputtered Au Coating for Efficient and Stable Perovskite Solar Cells

Halide perovskite solar cells (PSCs) represent a low-cost and high-efficiency solar technology. However, most of the highly efficient PSCs need a noble electrode, such as Au, through thermal evaporation. Here it is reported that a sputtered Au electrode on a PSC could damage the organic hole transport layer (HTL) and the perovskite layer. Here, we report a simple, yet effective sputtered gold nanoparticle decorated carbon electrode to fabricate efficient and stable planar PSCs. The sputtered Au layer on the doctor-bladed coated carbon electrode can be directly applied to the perovskite semicells by mechanical stacking. By optimizing the gold thickness, a power conversion efficiency (PCE) of 16.87% was obtained for the composite electrode-based PSC, while the reference device recorded a PCE of 12.38%. The composite electrode-based device demonstrated 96% performance retention after being stored under humid conditions (50-60%) without encapsulation for ~100 h. This demonstrates a promising pathway toward the commercialization of large-scale manufacturable sputtered electrodes for the PSC solar module.

14 SOLAR ENERGY↗

Buried Interfaces in Organic Photocathodes for H 2 Evolution: Fermi-Level Pinning and Recombination

Herein, we demonstrate how Fermi-level pinning at buried contacts impacts solar fuel generation in all-polymer photocathodes by systematically comparing the effects of work function, hydroxyl coverage, and hydrogen evolution using chemically modified indium tin oxide (ITO) supports. Photovoltages and net photocathode performance are improved when the ITO is passivated using phosphonic acids, independent of work function, suggesting that the passivation reduces Fermi-level pinning at the buried interface arising from blended heterojunction interactions with surface metal hydroxyls. Transient photovoltage decay reveals differences in recombination mechanisms, supported by light intensity-dependent measurements. Briefly, nonpassivated, hydrophilic contacts exhibit trap-assisted recombination, while passivated, hydrophobic contacts follow bimolecular recombination. We then investigate changes in electroactivity of hole-transfer processes as a function of scan rate and repetitive cycling using a diffusion-controlled molecular redox probe, analogous to a hole-only device achieved via the electrolyte. The nonpassivated buried contacts exhibit higher overpotentials for oxidation, indicative of hole injection/extraction barriers. We observe irreversible electron transfer via the hole-transport level of the blended heterojunction and a strong cycle dependence, consistent with changes in the hole trap state density. Passivation results in more reversible redox behaviors, consistent with more Ohmic-like contacts. Collectively, these results provide context toward the realization of durable organic photoelectrodes with optimized photovoltages and net solar-to-hydrogen conversion efficiencies via fundamental understanding of the rates of carrier generation, recombination, and transport in high-dielectric aqueous environments and opportunities to characterize buried interfaces under device-relevant electric fields.

buried interfaces↗

Revealing Nanoscale Solid–Solid Interfacial Phenomena for Long-Life and High-Energy All-Solid-State Batteries

Enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against sulfide solid electrolytes. While protective oxide coating layers such as LiNbO 3 (LNO) have been proposed, its precise working mechanisms are still not fully understood. Existing literature attributes reductions in interfacial impedance growth to the coating's ability to prevent interfacial reactions. However, its true nature is more complex, with cathode interfacial reactions and electrolyte electrochemical decomposition occurring simultaneously, making it difficult to decouple each effect. Herein, we utilized various advanced characterization tools and first-principles calculations to probe the interfacial phenomenon between solid electrolyte Li6PS5Cl (LPSCl) and high-voltage cathode LiNi 0.85 Co 0.1 Al 0.05 O 2 (NCA). We segregated the effects of spontaneous reaction between LPSCl and NCA at the interface and quantified the intrinsic electrochemical decomposition of LPSCl during cell cycling. We report both experimental and computational results demonstrated improved thermodynamic stability between NCA and LPSCl after incorporation of the LNO coating. Additionally, we revealed the in situ passivation effect of LPSCl electrochemical decomposition. When combined, both these phenomena occurring at the first charge cycle result in a stabilized interface, enabling long cyclability of all-solid-state batteries.

25 ENERGY STORAGE↗

Revealing Fast Cu-Ion Transport and Enhanced Conductivity at the CuInP 2 S 6 –In 4/3 P 2 S 6 Heterointerface

Van der Waals layered ferroelectrics, such as CuInP 2 S 6 (CIPS), offer a versatile platform for miniaturization of ferroelectric device technologies. Control of the targeted composition and kinetics of CIPS synthesis enables the formation of stable self-assembled heterostructures of ferroelectric CIPS and nonferroelectric In 4/3 P 2 S 6 (IPS). Here, we use quantitative scanning probe microscopy methods combined with density functional theory (DFT) to explore in detail the nanoscale variability in dynamic functional properties of the CIPS-IPS heterostructure. Within, we report evidence of fast ionic transport which mediates an appreciable out-of-plane electromechanical response of the CIPS surface in the paraelectric phase. Further, we map the nanoscale dielectric and ionic conductivity properties as we thermally stimulate the ferroelectric-paraelectric phase transition, recovering the local dielectric behavior during this phase transition. Finally, aided by DFT, we reveal a substantial and tunable conductivity enhancement at the CIPS/IPS interface, indicating the possibility of engineering its interfacial properties for next generation device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-enhanced bifunctional metal-acid catalyst for C=C bond hydrogenation

Water-assisted proton shuttling can promote hydrogenation of polar functional groups, and it is generally believed that such an effect can be hardly applied to hydrogenation of C═C bonds due to the latter's weak interaction with water. Here, we report density functional theory calculations and metadynamics simulations, through which we show a dynamic bifunctional metal–acid site that can be transformed, when interacting with water, into an active configuration for unexpected water-enhanced proton shuttling to C═C bonds. In particular, we investigated B(OH)3 anchored to a Ni catalyst for hydrogenation of cyclohexene in an organic solvent, which showed in experiments an increased rate by 100 times when adding a small amount of water. Metadynamics simulations suggest that a B(OH)3–H2O cluster can form on Ni(111), which promotes the proton transfer in the first hydrogenation step, while the second hydrogenation is still driven by metal-mediated direct H-transfer. The recovery process of B(OH)3–H2O also involves a proton shuttling step. We find that the boric species on the surface serves as an electron reservoir and carries the negative charge to balance the positive charge in the proton transfer steps. This work thus provides fundamental insights into this dynamic transformation process of the metal–acid interface, which can in principle be applied to many other bifunctional systems for hydrogenating non-polar unsaturated groups by engineering the interfacial charge separation.

Sun, Shoutian↗

Multifunctional oxides for integrated manufacturing of efficient graphene electrodes for organic electronics

Using multi-functional oxide films, we report on the development of an integration strategy for scalable manufacturing of graphene-based transparent conducting electrodes (TCEs) for organic electronics. A number of fundamental and process challenges exists for efficient graphene-based TCEs, in particular, environmentally and thermally stable doping, interfacial band engineering for efficient charge injection/extraction, effective wetting, and process compatibility including masking and patterning. Here, we show that all of these challenges can be effectively addressed at once by coating graphene with a thin (>10 nm) metal oxide (MoO{sub 3} or WO{sub 3}) layer. We demonstrate graphene electrode patterning without the need for conventional lithography and thereby achieve organic light emitting diodes with efficiencies exceeding those of standard indium tin oxide reference devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-layer deposited thulium oxide as a passivation layer on germanium

A comprehensive study of atomic-layer deposited thulium oxide (Tm{sub 2}O{sub 3}) on germanium has been conducted using x-ray photoelectron spectroscopy (XPS), vacuum ultra-violet variable angle spectroscopic ellipsometry, high-resolution transmission electron microscopy (HRTEM), and electron energy-loss spectroscopy. The valence band offset is found to be 3.05 ± 0.2 eV for Tm{sub 2}O{sub 3}/p-Ge from the Tm 4d centroid and Ge 3p{sub 3/2} charge-corrected XPS core-level spectra taken at different sputtering times of a single bulk thulium oxide sample. A negligible downward band bending of ∼0.12 eV is observed during progressive differential charging of Tm 4d peaks. The optical band gap is estimated from the absorption edge and found to be 5.77 eV with an apparent Urbach tail signifying band gap tailing at ∼5.3 eV. The latter has been correlated to HRTEM and electron diffraction results corroborating the polycrystalline nature of the Tm{sub 2}O{sub 3} films. The Tm{sub 2}O{sub 3}/Ge interface is found to be rather atomically abrupt with sub-nanometer thickness. In addition, the band line-up of reference GeO{sub 2}/n-Ge stacks obtained by thermal oxidation has been discussed and derived. The observed low reactivity of thulium oxide on germanium as well as the high effective barriers for holes (∼3 eV) and electrons (∼2 eV) identify Tm{sub 2}O{sub 3} as a strong contender for interfacial layer engineering in future generations of scaled high-κ gate stacks on Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Very High Efficiency, Hybrid Organic-Inorganic Photovoltaic Cells

This SETP project focuses on developing highly efficient, hybrid organic inorganic photovoltaic (OIPV) cells. The goal is to greatly enhance the power conversion efficiency of hybrid OIPV cells using several innovative approaches. The specific objectives are: (i) to develop new inorganic nanocrystals along with conjugated oligomers and polymers to improve their matching with the solar spectrum; (ii) to engineer the interfacial electronic structures at the hybrid interface to minimize energy and carrier losses during charge transfer; (iii) to understand the assembly of hybrid polymer/nanorod composites and demonstrate hybrid nanostructures that facilitate carrier transport and collection; and (iv) to demonstrate high efficiency hybrid OIPV cells by effectively incorporating materials absorbing in different spectral regions. Through this project, the research team at the University of Florida synthesized a series of new functional organic materials and colloidal nanocrystals with optical absorption covering the near-ultraviolet, visible, and near-infrared regions of the solar spectrum. The team also demonstrated improved understandings on how to control the morphological structure of the organic/inorganic hybrid active layer as well as on the orientation of anisotropic nanostructures in the organic matrix. With the demonstration of several innovative device structures, the efficiency of such hybrid photovoltaic cells was drastically increased. The introduction of proper chemical treatment of the nanocrystal/organic interface and the demonstration of a new light trapping technique (which can also be easily scaled up for large area device fabrication) also contributed to the significant increase in device efficiency. The new knowledge on material synthesis, material processing, device physics, and optical design gained from this project will greatly contribute to the further development of this low-cost PV technology.

14 SOLAR ENERGY↗

Nanoparticle Surface Passivation Strategies to Improve the Cycle and Calendar Lifetime of Silicon Anodes in Standard Carbonate Electrolytes

Silicon Lithium alloys (SiLix) as the anode active material in a Li-Ion battery configuration offer possible energy densities paralleled only by pure lithium metal. However, the extreme mechanical deformation of alloying and dealloying SiLix through charge/discharge cycles paired with the highly reactive interface of SiLix which generates an interfacial layer known as the solid-electrolyte-interphase are large barriers to industrial adoption of high-silicon-content negative electrodes. Moreover, these challenges are magnified when the thickness of the electrode is brought to relevant levels (>3 mg/cm2). Here, I describe our efforts to address these challenges by utilizing single-nanometer-scale silicon nanoparticles to reduce capacity fade related to mechanical failure. I also detail our efforts to modify the silicon surface through interfacial chemical engineering strategies to passivate the silicon surface. This development three different majority silicon electrodes (50-74 wt%) to achieve cycle capacity retention of greater than 73% through 1000 charge/discharge cycles against capacity-matched NMC-based cathodes and calendar lifetimes greater than one year. This research is a part of the multi-national lab Silicon Consortium Project.

anodes↗

Dislocation-induced stop-and-go kinetics of interfacial transformations

Most engineering materials are based on multiphase microstructures produced either through the control of phase equilibria or by the fabrication of different materials as in thin-film processing. In both processes, the microstructure relaxes towards equilibrium by mismatch dislocations (or geometric misfit dislocations) across the heterophase interfaces (1-5) . Despite their ubiquitous presence, directly probing the dynamic action of mismatch dislocations has been unachievable owing to their buried nature. In this work, using the interfacial transformation of copper oxide to copper as an example, we demonstrate the role of mismatch dislocations in modulating oxide-to-metal interfacial transformations in an intermittent manner, by which the lateral flow of interfacial ledges is pinned at the core of mismatch dislocations until the dislocation climbs to the new oxide/metal interface location. Together with atomistic calculations, we identify that the pinning effect is associated with the non-local transport of metal atoms to fill vacancies at the dislocation core. These results provide mechanistic insight into solid-solid interfacial transformations and have substantial implications for utilizing structural defects at buried interfaces to modulate mass transport and transformation kinetics.

25 ENERGY STORAGE↗

Nanoscale Structure and Interfacial Electrochemical Reactivity of Moiré-Engineered Atomic Layers

Here, the electronic properties of atomically thin van der Waals (vdW) materials can be precisely manipulated by vertically stacking them with a controlled offset (for example, a rotational offset─i.e., twist─between the layers, or a small difference in lattice constant) to generate moiré superlattices. In recent years, the application of this “twistronics” concept to interfacial electrochemistry has unveiled unique pathways for tailoring the electrochemical reactivity. Furthermore, this Account provides an overview of our work that leveraged a suite of structural characterization methods, such as interferometric four-dimensional scanning transmission electron microscopy, dark-field transmission electron microscopy, and scanning tunneling microscopy, along with nanoscale electrochemical measurement techniques, namely, scanning electrochemical cell microscopy (SECCM), to uncover and dissect the profound impact of electrode electronic structure, controlled by interlayer twist, on interfacial electron transfer kinetics.

Charge transfer↗

Electronic structure modulation of MoS2 by substitutional Se incorporation and interfacial MoO3 hybridization: Implications of Fermi engineering for electrocatalytic hydrogen evolution and oxygen evolution

The design of earth-abundant electrocatalysts that can facilitate water splitting at low overpotentials, provide high current densities, and enable prolonged operational lifetimes is central to the production of sustainable fuels. The distinctive atomistic and electronic structure characteristics of the edges of MoS2 imbue high reactivity toward the hydrogen evolution reaction. MoS2 is nevertheless characterized by significantly high overpotentials as compared to platinum. Here, we demonstrate that modulation of the electronic structure of MoS2 through interfacial hybridization with MoO3 and alloying of selenium on the anion sublattice allows for systematic lowering of the conduction band edge and raising of the valence band edge, respectively. The former promotes enhanced electrocatalytic activity toward hydrogen evolution, whereas the latter promotes enhanced activity toward the oxygen evolution reaction. Such alloyed heterostructures prepared by sol-gel reactions and hydrothermal selenization expose a high density of edge sites. The alloyed heterostructures exhibit low overpotential, high current density, high turnover frequency, and prolonged operational lifetime. The mechanistic origins of catalytic activity have been established based on electronic structure calculations and x-ray absorption and emission spectroscopy probes of electronic structure, which suggest that interfacial hybridization at the MoO3 interface yields low-lying conduction band states that facilitate hydrogen adsorption. In contrast, shallow Se 4p-derived states give rise to a raised effective valence band maximum, which facilitates adsorption of oxygen intermediates and engenders a low overpotential for the oxygen evolution reaction. The findings illustrate the use of electronic structure modulation through interfacial hybridization and alloying to systematically improve electrocatalytic activity.

Parija, Abhishek↗

Expression of interfacial Seebeck coefficient through grain boundary engineering with multi-layer graphene nanoplatelets

Energy filtering has been a long-sought strategy to enhance a thermoelectric material's figure of merit zT through improving its power factor. Here we show a composite of multi-layer graphene nanoplatelets (GNP) and n-type Mg 3 Sb 2 leads to the expression of an energy filtering like effect demonstrated by an increase in the material's Seebeck coefficient and maximum power factor, without impact on the material's carrier concentration. We analyse these findings from the perspective of a heterogeneous material consisting of grain and grain boundary phases, instead of a more traditional and common analysis that assumes a homogeneously transporting medium. An important implication of this treatment is that it leads to the development of an interfacial Seebeck coefficient term, which can explain the observed increase in the material's Seebeck coefficient. The contribution of this interfacial Seebeck coefficient to the overall Seebeck coefficient is determined by the relative temperature drop across the grain boundary region compared to that of the bulk material. In Te doped Mg 3 Sb 2 we show the introduction of GNP increases the interfacial thermal resistance of grain boundaries, enhancing the contribution of the interfacial Seebeck coefficient arising from grain boundaries to the overall Seebeck coefficient. Without significant detriment to the electrical conductivity this effect results in a net increase in maximum power factor. This increased interfacial thermal resistance also leads to the synergistic reduction of the total thermal conductivity. As a result, we enhance zT of the Mg 3 Sb 2 to a peak value of 1.7 near 750 K. Considering the two-dimensional nature of the grain boundary interface, this grain boundary engineering strategy could be applied to a few thermoelectric systems utilizing various two-dimensional nanomaterials.

42 ENGINEERING↗

Large orbital polarization in nickelate-cuprate heterostructures by dimensional control of oxygen coordination

Artificial heterostructures composed of dissimilar transition metal oxides provide unprecedented opportunities to create remarkable physical phenomena. Here, we report a means to deliberately control the orbital polarization in LaNiO 3 (LNO) through interfacing with SrCuO 2 (SCO), which has an infinite-layer structure for CuO 2 . Dimensional control of SCO results in a planar-type (P-SCO) to chain-type (C-SCO) structure transition depending on the SCO thickness. This transition is exploited to induce either a NiO 5 pyramidal or a NiO 6 octahedral structure at the SCO/LNO interface. Consequently, a large change in the Ni d orbital occupation up to similar to 30% is achieved in P-SCO/LNO superlattices, whereas the Ni e g orbital splitting is negligible in C-SCO/LNO superlattices. The engineered oxygen coordination triggers a metal-to-insulator transition in SCO/LNO superlattices. Our results demonstrate that interfacial oxygen coordination engineering provides an effective means to manipulate the orbital configuration and associated physical properties, paving a pathway towards the advancement of oxide electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing interfacial conductivity and spatial charge confinement of LaAlO{sub 3}/SrTiO{sub 3} heterostructures via strain engineering

We explored the possibility of enhancing interfacial conductivity and spatial charge confinement of LaAlO{sub 3}/SrTiO{sub 3} (LAO/STO) heterostructure (HS) via strain engineering using first-principles electronic structure calculations. We found that applying a tensile strain on the STO substrate along the ab-plane can significantly enhance the interfacial conductivity, magnetic moments, and the spatial charge confinement of the HS system. In contrast, a compressive strain can dilute the interfacial charge carrier density, make the mobile charges transfer to deep STO substrate, and weaken the spatial charge confinement along the c-axis. Hence, we propose that applying a tensile strain can be an effective way to enhance the interfacial conductivity and magnetism of STO-based HS systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic Liquid Engineering in Perovskite Photovoltaics

Over the past decade, perovskite photovoltaics have approached other currently available technologies and proven to be the most prospective type of solar cells. Although the many-sided research in this very active field has generated consistent results with regard to their undisputed consistently increasing power conversion efficiency, it also produced several rather contradictory opinions. Among other important details, debate surrounding their proneness to surface degradation and poor mechanical robustness, as well as the environmental footprint of this materials class, remains a moot point. The application of ionic liquids appears as one of the potential remedies to some of these challenges due to their high conductivity, the opportunities for chemical “tuning” of the structure, and relatively lower environmental footprint. This article provides an overview, classification, and applications of ionic liquids in perovskite solar cells. Here, we summarize the use and role of ionic liquids as versatile additives, solvents, and modifiers in perovskite precursor solution, in charge transport layer, and in interfacial and stability engineering. Finally, challenges and the future prospects for the design and/or selection of ionic liquids with a specific profile that meets the requirements for next-generation highly efficient and stable perovskite solar cells are proposed.

14 SOLAR ENERGY↗