Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inorganic electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Molecular Tuning of Ether Cosolvent Chemistry for High-Voltage Sodium-Ion Batteries

Ethers as electrolyte cosolvents in sodium-ion batteries (SIBs) provide favorable Na + solvation and interfacial properties, but their low oxidative stability limits their use in high-voltage SIBs. Herein, we address this limitation via molecular tuning of ether cosolvents for high-voltage (4.2 V) hard carbon || NaNi 0.33 Fe 0.33 Mn 0.33 O 2 full cells. Tetrahydropyran (THP) is functionalized with a nitrile group to form tetrahydropyran-4-carbonitrile (THPCN). To delineate the effect of nitrile functionalization and benchmark ether against a conventional carbonate, THP, THPCN, and diethyl carbonate (DEC) are evaluated as cosolvents with ethylene carbonate. Nitrile functionalization lowers the HOMO energy of the ether, extends the electrolyte stability window, and alters Na⁺ solvation. Spectroscopic techniques and molecular dynamics simulations reveal that THPCN exhibits predominantly aggregate-dominated solvation (95.1 %) with weakened Na + -solvent interactions, producing the most anion-rich environment relative to DEC and THP cosolvents. THPCN-modified solvation promotes the formation of highly conductive, fluorine-enriched interphases that suppress parasitic reactions. Pouch full cells with THPCN sustained ~ 600 cycles at 4.2 V, outperforming THP and DEC. Operando gas analysis reveals that THPCN reduces CO 2 generation by 45% and H 2 generation by 30% relative to THP. Furthermore, the findings demonstrate nitrile functionalization as a molecular design strategy to stabilize ethers and enable high-voltage SIBs.

25 ENERGY STORAGE↗
NASA NTRS2008

Special Polymer/Carbon Composite Films for Detecting SO2

A family of polymer/carbon films has been developed for use as sensory films in electronic noses for detecting SO2 gas at concentrations as low as 1 part per million (ppm). Most previously reported SO2 sensors cannot detect SO2 at concentrations below tens of ppm; only a few can detect SO2 at 1 ppm. Most of the sensory materials used in those sensors (especially inorganic ones that include solid oxide electrolytes, metal oxides, and cadmium sulfide) must be used under relatively harsh conditions that include operation and regeneration at temperatures greater than 100 C. In contrast, the present films can be used to detect 1 ppm of SO2 at typical opening temperatures between 28 and 32 C and can be regenerated at temperatures between 36 and 40 C. The basic concept of making sensing films from polymer/carbon composites is not new. The novelty of the present family of polymer/carbon composites lies in formulating the polymer components of these composites specifically to optimize their properties for detecting SO2. First-principles quantum-mechanical calculations of the energies of binding of SO2 molecules to various polymer functionalities are used as a guide for selecting polymers and understanding the role of polymer functionalities in sensing. The polymer used in the polymer-carbon composite is a copolymer of styrene derivative units with vinyl pyridine or substituted vinyl pyridine derivative units. To make a substituted vinyl pyridine for use in synthesizing such a polymer, poly(2-vinyl pyridine) that has been dissolved in methanol is reacted with 3-chloropropylamine that has been dissolved in a solution of methanol. The methanol is then removed to obtain the copolymer. Later, the copolymer can be dissolved in an appropriate solvent with a suspension of carbon black to obtain a mixture that can be cast and then dried to obtain a sensory film.

Homer, Margie↗
DOE OSTI2021

In-built ultraconformal interphases enable high-safety practical lithium batteries

There is an urgent need for high-safety and high-energy lithium-ion batteries to satisfy the rapidly increasing need for energy storage. Nickel-rich layered cathodes have been at the forefront of the revolution for batteries due to their relatively high capacity and low cost. However, with the increase of nickel content, the batteries suffer from severe safety concerns, which caused by thermal runaway. Herein, we show that the ultraconformal cathode-electrolyte interphase (CEI) protective skin with high inorganic content dramatically enhances the safety of high-energy practical Li-ion pouch cells. We find that the robust CEI skin significantly improves the intrinsic thermal stability, mitigates the evolution of oxygen resulting from phase transition, and effectively suppresses the associated parasitic reactions between the delithiated cathodes and electrolyte. The in-situ CEI engineering strategy is simple and suitable for practical industrial manufacture, and it provides design ideas for aggressive nickel-rich cathodes towards safe and high-energy batteries.

25 ENERGY STORAGE↗
NASA NTRS2007

Lithium Dinitramide as an Additive in Lithium Power Cells

Lithium dinitramide, LiN(NO2)2 has shown promise as an additive to nonaqueous electrolytes in rechargeable and non-rechargeable lithium-ion-based electrochemical power cells. Such non-aqueous electrolytes consist of lithium salts dissolved in mixtures of organic ethers, esters, carbonates, or acetals. The benefits of adding lithium dinitramide (which is also a lithium salt) include lower irreversible loss of capacity on the first charge/discharge cycle, higher cycle life, lower self-discharge, greater flexibility in selection of electrolyte solvents, and greater charge capacity. The need for a suitable electrolyte additive arises as follows: The metallic lithium in the anode of a lithium-ion-based power cell is so highly reactive that in addition to the desired main electrochemical reaction, it engages in side reactions that cause formation of resistive films and dendrites, which degrade performance as quantified in terms of charge capacity, cycle life, shelf life, first-cycle irreversible capacity loss, specific power, and specific energy. The incidence of side reactions can be reduced through the formation of a solid-electrolyte interface (SEI) a thin film that prevents direct contact between the lithium anode material and the electrolyte. Ideally, an SEI should chemically protect the anode and the electrolyte from each other while exhibiting high conductivity for lithium ions and little or no conductivity for electrons. A suitable additive can act as an SEI promoter. Heretofore, most SEI promotion was thought to derive from organic molecules in electrolyte solutions. In contrast, lithium dinitramide is inorganic. Dinitramide compounds are known as oxidizers in rocket-fuel chemistry and until now, were not known as SEI promoters in battery chemistry. Although the exact reason for the improvement afforded by the addition of lithium dinitramide is not clear, it has been hypothesized that lithium dinitramide competes with other electrolyte constituents to react with lithium on the surface of the anode to form a beneficial SEI. Apparently, nitrides and oxides that result from reduction of lithium dinitramide on the anode produce a thin, robust SEI different from the SEIs formed from organic SEI promoters. The SEI formed from lithium dinitramide is more electronically insulating than is the film formed in the presence of an otherwise identical electrolyte that does not include lithium dinitramide. SEI promotion with lithium dinitramide is useful in batteries with metallic lithium and lithium alloy anodes.

Gorkovenko, Alexander A.↗
DOE OSTI2022

Differences in the Interfacial Mechanical Properties of Thiophosphate and Argyrodite Solid Electrolytes and Their Composites

Interfacial mechanics are a significant contributor to the performance and degradation of solid-state batteries. Spatially resolved measurements of interfacial properties are extremely important to effectively model and understand the electrochemical behavior. Herein, we report the interfacial properties of thiophosphate (Li 3 PS 4 )- and argyrodite (Li 6 PS 5 Cl)-type solid electrolytes. Using atomic force microscopy, we showcase the differences in the surface morphology as well as adhesion of these materials. Additionally we investigate solvent-less processing of hybrid electrolytes using UV-assisted curing. Physical, chemical, and structural characterizations of the materials highlight the differences in the surface morphology, chemical makeup, and distribution of the inorganic phases between the argyrodite and thiophosphate solid electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Systematic Way to Extend the Debye–Hückel Theory beyond Dilute Electrolyte Solutions

An extended Debye–Hückel theory with fourth order gradient term is developed for electrolyte solutions; namely, the electric potential φ(r) of the bulk electrolyte solution can be described by ∇ 2 φ(r) = κ 2 φ(r) + L Q 2 ∇ 4 φ(r), where the parameters κ and L Q are chosen to reproduce the first two roots of the dielectric response function of the bulk solution. Three boundary conditions for solving the electric potential problem are proposed based upon the continuity conditions of involving functions at the dielectric boundary, with which a boundary element method for the electric potential of a solute with a general geometrical shape and charge distribution is derived. Solutions for the electric potential of a spherical ion and a diatomic molecule are found and used to calculate their electrostatic solvation energies. In this work, the validity of the theory is successfully demonstrated when applied to binary as well as multicomponent primitive models of electrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular-level solvation and selectivity behavior of Na + , K + , and Li + within glycerol-derived solvents

Ether-based acyclic solvents have a tendency to confine positively charged atoms, forming structures called podands. Due to the stability of these structures, podands have been identified as promising candidates for several different electrochemical applications. In this work, we use molecular dynamics simulations to investigate the solvation and selectivity of Na + , K + , and Li + by different glycerol-derived solvents. The structural properties suggest that the solvent-cation association is stable over a very wide temperature range. Further, a strong correlation is observed between the more electronegative oxygen sites and preferential interaction with the cations, which suggests that the electrostatic oxygen-ion interactions dominate the coordination between these species. Significantly more intense interactions are observed between the solvents and Li + , versus Na + or K + . These molecular-level thermodynamic insights provide fundamental support for further exploring the performance of glycerol-derived podand complexes in Li + capture applications and/or electrolyte formulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anolyte Buffering and CO Coverage Effects in the Electrochemical Reduction of CO at Cu Electrocatalysts

Electrolytic CO reduction was investigated at copper electrocatalysts in zero-gap membrane electrode assemblies as a function of buffering agents and cofeeding with CO 2 or Ar. Results show an acetate Faradaic efficiency (FE) of 90% at 300 mA cm −2 using pure CO feeds and phosphate-buffered anolyte near pH 8. When using CO feeds with more alkaline anolytes, the hydrogen evolution reaction becomes the dominant reduction reaction, independent of the buffer. Product distributions of cofeeding experiments with CO and CO 2 show that increasing CO 2 cofeeding results in increased selectivity toward ethylene (42% FE) in near-neutral KHCO 3 anolytes or ethanol (40% FE) in alkaline KOH anolytes. Evaluation of several commercial anion exchange membranes shows similar selectivity trends, suggesting product selectivity is dominated by the local pH and surface coverage of CO. Based on these results, we propose pH buffering and CO coverage behaviors that facilitate high selectivities to acetate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Composite Solid Ion Conductor with Engineered Lithium Interface

Successful widespread commercialization of electric vehicles is contingent upon development of safe high energy density batteries capable of long cycle life. Lithium metal affords the highest theoretical capacity (3,860 mAh/g) and lowest electrochemical potential (-3.04V vs SHE), which offers the highest specific energy density of anode materials today. While Li-ion batteries are capable of delivering energy densities of 400-600 Wh/kg, the development of lithium metal batteries such as Li-S and Li-air may boost this number up to 650 and 950 Wh/kg, respectively. However, significant progress towards the passivation of lithium metal must occur before the energy density benefit can be realized. Issues with lithium dendrite formation, anode volume expansion, and continuous solid electrolyte interphase (SEI) build-up often result in significant safety concerns, high cell resistance, and poor cycle life. The intrinsic high reactivity between lithium metal with conventional lithium ion electrolytes (organic carbonate-based solvents) makes it extremely difficult to overcome these problems. In this project, Wildcat performed focused, fundamental research and development on composite polymer/ceramic electrolytes and protected lithium metal anodes to develop an all solid state lithium metal battery targeting the DOE requirements to enable commercialization. Wildcat successfully leveraged its high throughput battery platform and explored a broad composite electrolyte compositional space. Additionally, Wildcat screened large numbers of inorganic and organic coatings for lithium metal protection using in situ liquid methods and translated the best results to all solid cells. The proposed composite polymer/ceramic electrolyte and a protected lithium metal anode enabled a solid-state lithium metal battery. The ultimate targets from this effort will deliver a safe all solid-state lithium metal pouch cell with over 350 Wh/kg and over 1,000 cycles (C/3) with the cost estimate below $100/kWh. During the course of the project, we demonstrated stable cycling of 10’s of cycles with the composite SSE and our protected lithium. The work has continued after the conclusion of the DOE funding, demonstrating further improvements in catholyte composition and thinner composite solid electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2020

Reversible Changes in the Grain Structure and Conductivity in a Block Copolymer Electrolyte

Here, we study the phase behavior of a triblock organic–inorganic hybrid copolymer, poly(polyhedral oligomeric silsesquioxane)-b-poly(ethylene oxide)-b-poly(polyhedral oligomeric silsesquioxane) (POSS-PEO-POSS)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt mixture, as a function of temperature. The polymer exhibits a lamellar morphology both in the neat state and in the presence of salt. However, the average grain size increases substantially when the electrolyte is heated above 113 °C. The grain structure of this sample changes reversibly with temperature, that is, smaller grains reappear when the electrolyte is cooled below 113 °C. While annealing block copolymers at high temperatures often leads to an increase in the grain size, this change is generally irreversible. The reason for the reversible change in the grain structure of the POSS-PEO-POSS/LiTFSI electrolyte is discussed. The ionic conductivity of the electrolyte also exhibits reversible changes in this temperature window. Knowledge of the grain structure is crucial for understanding ion transport in nanostructured electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2022

A step-wise ion hydration model of aqueous electrolyte solution: The 2:2, 2:1 and 1:2 punches

In prior work we showed that the current step-wise hydration framework shows promise for modeling the concentration-activity relationship in aqueous solutions of ions representing 1:1 electrolytes, alcohols, and sugars, and accurately predicting the partitioning of the water between the bound (hydrated) pool and an unbound (free) pool. Here, in the current work, we continue developing this framework by applying it to ions representing 2:2, 2:1 and 1:2 electrolyte in aqueous solutions. Properly treating ion hydration as an ideal solution along with employing mean spherical approximation of the long-range electrostatic interactions yields an accurate model for most electrolytes considered. This simple model of aqueous solutions is robust for electrolytes and organic solutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synchronized Breathing in Anion-Derived Interphases

Anion-derived interphases are crucial for extending the cycle life of lithium metal batteries. While their benefits are often attributed to crystalline inorganic species like LiF and Li 2 O, the role of amorphous inorganic species and the interplay between the anode-electrolyte interphase (SEI) and the cathode-electrolyte interphase (CEI) remain largely unexplored. Here, in this study, we examine two model electrolyte systems─one with solvent-derived interphases and the other with anion-derived interphases─using advanced X-ray scattering and spectroscopy techniques. Our findings reveal that anion-derived interphases contain substantial amounts of amorphous inorganic species, leading to a unique synchronization of "breathing" between SEI and CEI. During charging, the SEI grows while the CEI shrinks; during discharging, these roles reverse. This distinctive interfacial behavior originates from the competition of deposition and dissolution of amorphous inorganics during cycling. The study highlights the unique role of amorphous inorganics in anion-derived interphases, providing new insights into improving battery performance and durability.

25 ENERGY STORAGE↗
DOE OSTI2022

Refined Classical Force Field for Choline Chloride and Ethylene Glycol Mixtures over Wide Composition Range

In this work, a classical force field based on the General Amber Force Field (GAFF) was refined for the simulation of choline chloride (ChCl) and ethylene glycol (EG) mixtures over a wide composition range by scaling the partial charges and van der Waals parameters. The scaling factors were derived by fitting the simulation results to only eight experimental density and viscosity data points of pure EG, and ChCl/EG mixtures at 1:2, 1:4, and 1:6 molar ratios. Using the refined force field, properties essential for electrochemical applications such as density, viscosity, self-diffusion coefficient, and ionic conductivity were calculated, and excellent agreement to experimental results was found even for compositions and temperatures not used in the fitting procedure. In addition, new experimental data for density, viscosity, and ionic conductivity are reported as a function of temperature and composition for this mixture. To the best of our knowledge, this is the first classical force field developed for the study of ChCl/EG mixtures over a composition range that includes the eutectic point. Using the new model, the liquid dynamics was studied in terms of ionic conductivity. It was found that the dynamics in ChCl/EG mixtures with ChCl mole fraction higher than 20% is similar to that of ionic liquids, high temperature molten salts, and highly concentrated water-in-salt electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2024

Dynamic density functional theory of polymers with salt in electric fields

Here we present a dynamic density functional theory for modeling the effects of applied electric fields on the local structure of polymers with added salt (polymer electrolytes). Time-dependent equations for the local electrostatic potential and volume fractions of polymer, cation, and anion of added salt are developed using the principles of linear irreversible thermodynamics. For such a development, a field theoretic description of the free energy of polymer melts doped with salts is used, which captures the effects of local variations in the dielectric function. Connections of the dynamic density functional theory with experiments are established by relating the three phenomenological Onsager’s transport coefficients of the theory to the mutual diffusion of electrolyte, ionic conductivity, and transference number of one of the ions. The theory is connected with a statistical mechanical model developed by Bearman and Kirkwood [J. Chem. Phys. 28, 136 (1958)] after relating the three transport coefficients to friction coefficients. The steady-state limit of the dynamic density functional theory is used to understand the effects of dielectric inhomogeneity on the phase separation in polymer electrolytes. The theory developed here provides not only a way to connect with experiments but also to develop multi-scale models for studying connections between local structure and ion transport in polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1969

Improved inorganic ion exchange membranes

New method makes solid ion exchange membrane electrolytes for use in hydrocarbon-oxygen and hydrogen-oxygen fuel cells. The membrane is a sintered composite of zirconia, phosphoric acid, and zeolite.

Arrance, F. C.↗
DOE OSTI2022

Fast estimation of ion-pairing for screening electrolytes: A cluster can approximate a bulk liquid

The propensity for ion-pairing can often dictate the thermodynamic and kinetic properties of electrolyte solutions. Fast and accurate estimates of ion-pairing can thus be extremely valuable for supplementing design and screening efforts for novel electrolytes. We introduce an efficient cluster model to estimate the local ion-pair potential-of-mean-force between ionic solutes in electrolytes. The model incorporates an ion-pair and a few layers of explicit solvent in a gas-phase cluster and leverages an enhanced sampling approach to achieve high efficiency and accuracy. We employ harmonic restraints to prevent solvent escape from the cluster and restrict sampling of large inter-ion distances. We develop a cluster ion-pair sampling tool that implements our cluster model and demonstrate its potential utility for screening simple and poly-electrolyte systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗