Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hypersonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Burnett solutions along the stagnation line of a cooled cylinder in low-density hypersonic flows

The Burnett equations in the cylindrical coordinate system have been applied to the hypersonic flow over a cylinder in low density environments. Through a local similarity transformation, the Burnett equations are degenerated into nonlinear third-order ordinary differential equations which are only valid along the stagnation line. These equations are solved by the multi-staged Runge-Kutta integration technique. Steady state solutions are asymptotically reached by the time-marching procedure. A newly-developed computer code is used to solve both the Navier-Stokes and the Burnett equations within the shock layer. The computed heat transfer coefficients are consistent with wind-tunnel and STS flight data. Comparisons with the DSMC solutions and the Boltzmann solutions show that the Burnett equations are more appropriate as the governing equations than the Navier-Stokes equations in the transitional flow regime.

Liaw, G. S.↗

Computation of hypersonic flows with finite rate condensation and evaporation of water

A computer program for modelling 2D hypersonic flows of gases containing water vapor and liquid water droplets is presented. The effects of interphase mass, momentum and energy transfer are studied. Computations are compared with existing quasi-1D calculations on the nozzle of the NASA Langley Eight Foot High Temperature Tunnel, a hypersonic wind tunnel driven by combustion of natural gas in oxygen enriched air.

Perrell, Eric R.↗

Hypersonic flow simulations using DSMC (direct simulation Monte Carlo)

A review of the DSMC method of Bird is presented. The DSMC method provides the capability of simulating real gas flows in the rarefied flow regime. Recent developments and applications of the method for hypersonic flows are reported for both ground-based tests and during entry. Results obtained using both axisymmetric and 3D codes are included.

Moss, James N.↗

Simulated Hypersonic Flows About A Blunt Body

Unsteady and steady flows compared. Report describes computer numerical study of two-dimensional, unsteady, viscous, hypersonic flows of air about blunt body with impinging shock. This kind of flow represents many practical phenomena; for example, interaction of fluctuating bow shock of hypersonic airplane with shocks of leading edge of wing or of lip of cowl at inlet to engine. Such interactions give rise to complicated, moving shock-on-shock patterns.

Kutler, P.↗

Turbulence and shear stress measurements in hypersonic flow

An assessment has been made of the potential for hot wire and laser anemometer measurements of turbulent fluctuations in hypersonic flow fields. The results of laser velocimeter experiments conducted in two hypersonic wind tunnels are reported and comparisons made with previous hot wire turbulence measurements. A new concept for the measurement of the compressible shear stress terms which combines the attributes of both hot wire and laser anemometry is presented.

Owen, F. K.↗

High-resolution shock-capturing schemes for inviscid and viscous hypersonic flows

A class of implicit Total Variation Diminishing (TVD) type algorithms suitable for transonic and supersonic multidimensional Euler and Navier-Stokes equations was extended to hypersonic computations. The improved conservative shock-capturing schemes are spatially second- and third-order, and are fully implicit. They can be first- or second-order accurate in time and are suitable for either steady or unsteady calculations. Enhancement of stability and convergence rate for hypersonic flows is discussed. With the proper choice of the temporal discretization and suitable implicit linearization, these schemes are fairly efficient and accurate for very complex two-dimensional hypersonic inviscid and viscous shock interactions. This study is complimented by a variety of steady and unsteady viscous and inviscid hypersonic blunt-body flow computations. Due to the inherent stiffness of viscous flow problems, numerical experiments indicated that the convergence rate is in general slower for viscous flows than for inviscid steady flows.

Yee, H. C.↗

Numerical solution of the steady-state Navier-Stokes equations for hypersonic flow about blunt axisymmetric bodies

The steady-state Navier-Stokes equations are solved for hypersonic flow about blunt axisymmetric bodies. The equations of motion are solved by successive approximations using an implicit finite-difference scheme. The results are compared with viscous shock-layer theory, experimental data, and time-dependent solutions of the Navier-Stokes equations. It is demonstrated that viscous shock-layer theory is sufficiently accurate for the range of flight conditions normally encountered by entry vehicles.

Anderson, E. C.↗

Numerical solution of the steady-state Navier-Stokes equations for hypersonic flow about blunt axisymmetric bodies

The steady-state Navier-Stokes equations are solved for hypersonic flow about blunt axisymmetric bodies. The equations of motion are solved by successive approximations using an implicit finite-difference scheme. The results are compared with viscous shock-layer theory, experimental data, and time-dependent solutions of the Navier-Stokes equations. It is demonstrated that viscous shock-layer theory is sufficiently accurate for the range of flight conditions normally encountered by entry vehicles.

Anderson, E. C.↗

Characterization of a hot-film probe for hypersonic flow

The critical issues concerning the application of constant-temperature hot-film anemometry to hypersonic flow are reviewed and extended. Mass-flux static calibrations were conducted in a Mach 10 helium flow, while mass-flux and total-temperature static calibrations were made in a Mach 6 air flow. In addition, comparative hot-film/hot-wire turbulence measurements were made in a Mach 11 helium boundary layer to provide insight into the dynamic response of the hot film. The measurements indicate that substrate conduction 'losses' dominate the static response of the hot-film probe, thus resulting in poor sensitivity to mass-flux and total temperature. Furthermore, it has been found that it is not possible to isolate mass-flux fluctuations at high overheat ratios for the current hot-film design. Thus, the sapphire-substrate hot-film anemometer is a robust, high-bandwidth instrument limited to qualitative transition and turbulence measurements. Finally, the extension of this technique to providing quantitative information is dependent upon the development of lower thermal-conductivity substrate materials.

Sheplak, M.↗

Computation of viscous hypersonic flow over control surfaces

A parabolized Navier-Stokes (PNS) computer code has been used to compute hypersonic flow over control surfaces located on the aft end of generic re-entry configurations. The Beam-Warming implicit numerical algorithm as modified by Schiff and Steger is used to march in the spatial direction. The outer bow shock is treated as a sharp discontinuity; within the shock layer discontinuities are captured. Several different turbulent flow solutions were generated for flap angles varying from -7 deg to 15 deg and angles of attack varying from 0 deg to 20 deg. The present results are qualitatively correct when compared with previous compression corner studies.

Chaussee, D. S.↗

A fine-wire thermocouple probe for measurement of stagnation temperatures in real gas hypersonic flows of nitrogen

A fine-wire thermocouple probe was used to determine freestream stagnation temperatures in hypersonic flows. Data were gathered in a N2 blowdown wind tunnel with runtimes of 1-5 s. Tests were made at supply pressures between 30 and 1400 atm and supply temperatures between 700 and 1900 K, with Mach numbers of 14 to 16. An iterative procedure requiring thermocouple data, pilot pressure measurements, and supply conditions was used to determine test cell stagnation temperatures. Probe conduction and radiation losses, as well as real gas behavior of N2, were accounted for during analysis. Temperature measurement error was found to be 5 to 10 percent. A correlation was drawn between thermocouple diameter Reynolds number and temperature recovery ratio. Transient probe behavior was studied and was found to be adequate in temperature gradients up to 1000 K/s.

Hollis, Brian R.↗

Approximate Analytical Solutions for Hypersonic Flow Over Slender Power Law Bodies

Approximate analytical solutions are presented for two-dimensional and axisymmetric hypersonic flow over slender power law bodies. Both zero order (M approaches infinity) and first order (small but nonvanishing values of 1/(M(Delta)(sup 2) solutions are presented, where M is free-stream Mach number and Delta is a characteristic slope. These solutions are compared with exact numerical integration of the equations of motion and appear to be accurate particularly when the shock is relatively close to the body.

Mirels, Harold↗

Implementation of Radiation, Ablation, and Free Energy Minimization Modules for Coupled Simulations of Hypersonic Flow

A description of models and boundary conditions required for coupling radiation and ablation physics to a hypersonic flow simulation is provided. Chemical equilibrium routines for varying elemental mass fraction are required in the flow solver to integrate with the equilibrium chemistry assumption employed in the ablation models. The capability also enables an equilibrium catalytic wall boundary condition in the non-ablating case. The paper focuses on numerical implementation issues using FIRE II, Mars return, and Apollo 4 applications to provide context for discussion. Variable relaxation factors applied to the Jacobian elements of partial equilibrium relations required for convergence are defined. Challenges of strong radiation coupling in a shock capturing algorithm are addressed. Results are presented to show how the current suite of models responds to a wide variety of conditions involving coupled radiation and ablation.

Gnoffo, Peter A.↗

Artificial Dissipation In Computations Of Hypersonic Flows

Four artificial-dissipation mathematical models introduced to suppress spurious numerical oscillations in finite-difference computations of hypersonic external flows. Models tested for their effects in capturing details of shocks in hypersonic flows about bodies of various shapes.

Yoon, S.↗