Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “heating capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Spin, orbital ordering, and magnetic dynamics of LaVO{sub 3}: Magnetization, heat capacity, and neutron scattering studies

We report the results of magnetization, heat capacity, and neutron scattering studies of LaVO{sub 3} single crystals. From the neutron-diffraction studies, it was found that the compound is magnetically ordered with a C-type antiferromagnetic spin structure at about 136 K. In the vicinity of the ordering temperature, we also observed hysteresis in the neutron-diffraction data measured on cooling and heating which indicates the first-order nature of the phase transition. In the antiferromagnetically ordered phase, the inelastic neutron scattering studies reveal the presence of a temperature independent c-axis spin-wave gap of about 6 meV which is similar to that previously reported for the sister compound YVO{sub 3}.

36 MATERIALS SCIENCE↗

Phase transitions and unusual behavior of heat capacity in metal organic framework compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}

Thermodynamic properties of high-porous metal-organic framework (MOF) compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} were studied in the temperature range 8.9–300 K using low-temperature adiabatic calorymetry and DSC methods. Phase transitions were observed at ∼15, ∼60, and ∼135 K. It is shown that specific heat of the compound obeys the classical Debye law C{sub p}∼T{sup 3} only below 15 K, whereas above 15 K it is proportional to the first degree of temperature, C{sub p}∼T, to indicate a strong anisotropy of crystal vibrations corresponding to 1D continuum. It is shown that the strong anisotropy can be related to coordination interaction of Zn{sup 2+} and N{sub 2}(CH{sub 2}){sub 6} ligands in the specific structure of compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}. - Graphical abstract: Specific heat C{sub p} is proportional to the first degree of temperature showing a strong anisotropy of crystal vibrations corresponding to 1D continuum in Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6.} - Highlights: • Specific heat capacity of Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} was first studied at 8.9–300 K. • Phase transitions were observed at ∼15, ∼60, and ∼135 K. • The heat capacity is proportional to the first degree of temperature above 15 K. • The discovered dependency corresponds to a one-dimensional vibration continuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of impurities on the heat capacity of quasi-one-dimensional conductors

The low-temperature heat capacity of a quasi-one-dimensional conductor in the Luttinger liquid state is studied for conductors with a charge density wave and without it. It is shown that pinning of the Luttinger liquid leads to localization of spins and a strong effect of the magnetic field on the thermodynamics of samples resembling the effect observed in recent experiments. We believe that this indicates the possibility of the formation of a Luttinger liquid in quasi-one-dimensional crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronically- and crystal-structure-driven magnetic structures and physical properties of RScSb (R = rare earth) compounds. A neutron diffraction, magnetization and heat capacity study

The synthesis of the new equiatomic RScSb ( R = La-Nd, Sm, Gd-Tm, Lu, Y) compounds has been recently reported. These rare earth compounds crystallize in two different crystal structures, adopting the CeScSi-type ( I 4/ mmm) for the lighter R (La-Nd, Sm) and the CeFeSi-type (P4 /nmm) structure for the heavier R ( R = Gd-Tm, Lu, Y). Here we report the results of neutron diffraction, magnetization and heat capacity measurements on some of these compounds ( R = Ce, Pr, Nd, Gd and Tb). Band structure calculations have also been performed on CeScSb and GdScGe (CeScSi-type), and on GdScSb and TbScSb (CeFeSi-type) to compare and understand the exchange interactions in CeScSi and CeFeSi structure types. The neutron diffraction investigation shows that all five compounds order magnetically, with the highest transition temperature of 66 K in TbScSb and the lowest of about 9 K in CeScSb. The magnetic ground state is simple ferromagnetic (τ = [0 0 0]) in CeScSb, as well in NdScSb for 32 >T > 22 K. Below 22 K a second magnetic transition, with propagation vector τ = [¼ ¼ 0], appears in NdScSb. PrScSb has a magnetic structure within, determined by mostly ferromagnetic interactions and antiferromagnetic alignment of the Pr-sites connected through the I-centering ( τ = [1 0 0]). A cycloidal spiral structure with a temperature dependent propagation vector τ = [δ δ ½] is found in TbScSb. The results of magnetization and heat capacity lend support to the main conclusions derived from neutron diffraction. As inferred from a sharp peak in magnetization, GdScSb orders antiferromagnetically at 56 K. First principles calculations show lateral shift of spin split bands towards lower energy from the Fermi level as the CeScSi-type structure changes to the CeFeSi-type structure. This rigid shift may force the system to transform from exchange split ferromagnetic state to the antiferromagnetic state in RScSb compounds (as seen for example in GdScSb and TbScSb) and is proposed to explain the change-over from a ferromagnetic structure as found in the CeScSi-type compounds CeScSb and NdScSb to the antiferromagnetic state as found in TbScSb and GdScSb.

36 MATERIALS SCIENCE↗

Heat capacity peak at the quantum critical point of the transverse Ising magnet CoNb2O6

The transverse Ising magnet Hamiltonian describing the Ising chain in a transverse magnetic field is the archetypal example of a system that undergoes a transition at a quantum critical point (QCP). The columbite CoNb 2 O 6 is the closest realization of the transverse Ising magnet found to date. At low temperatures, neutron diffraction has observed a set of discrete collective spin modes near the QCP. Here, we ask if there are low-lying spin excitations distinct from these relatively high-energy modes. Using the heat capacity, we show that a significant band of gapless spin excitations exists. At the QCP, their spin entropy rises to a prominent peak that accounts for 30% of the total spin degrees of freedom. In a narrow field interval below the QCP, the gapless excitations display a fermion-like, temperature-linear heat capacity below 1K. These novel gapless modes are the main spin excitations participating in, and affected by, the quantum transition.

Science & Technology - Other Topics↗

Excess Heat Capacity in Mo/Au Transition Edge Sensor Bolometric Detectors

Excessheat capacity in a bolometric detector has the consequence of increasing or leading to multiple device time con-stants.The Mo/Au bilayer transition edge sensor (TES) bolo-metric detectors intended for the high resolution mid-infrared spectrometer (HIRMES) have two response time, one of which is a few times longer than that estimated from materials used in the design. The relative contribution of this settling time to the overall time response of the detectors is roughly proportional with the pixel area, which ranges between ~0.3 and 2.6 mm2.Use of laser ablation to remove sections of the silicon membranes comprising the pixels results in a detector response with a smaller contribution from the secondary time constant.Additional information about the nature of this excess heat capacity is gleaned from glancing in-cidence x-ray diffraction, which reveals the presence of molyb-denum silicides near the silicon surface from the bi-layer deposi-tion.Quantitative analysis of the concentration of excess molyb-denum, estimated with secondary ion mass spectroscopy, is com-mensurate to the additional heat capacity needed to explain the anomalous time response of the detectors.

HIRMES↗

Low temperature heat capacity of Fe1-xGax alloys with large magnetostriction

The low temperature heat capacity C{sub p} of Fe{sub 1-x}Ga{sub x} alloys with large magnetostriction has been investigated. The data were analyzed in the standard way using electron ({gamma}T) and phonon ({beta}T{sup 3}) contributions. The Debye temperature {Theta}{sub D} decreases approximately linearly with increasing Ga concentration, consistent with previous resonant ultrasound measurements and measured phonon dispersion curves. Calculations of {Theta}{sub D} from lattice dynamical models and from measured elastic constants C{sub 11}, C{sub 12}, and C{sub 44} are in agreement with the measured data. The linear coefficient of electronic specific heat {gamma} remains relatively constant as the Ga concentration increases, despite the fact that the magnetoelastic coupling increases. Band structure calculations show that this is due to the compensation of majority and minority spin states at the Fermi level.

36 MATERIALS SCIENCE↗

Low temperature heat capacity of Fe1-xGax alloys with large mafnetosreiction

The low temperature heat capacity C{sub p} of Fe{sub 1-x}Ga{sub x} alloys with large magnetostriction has been investigated. The data were analyzed in the standard way using electron ({gamma}T) and phonon ({beta}T{sup 3}) contributions. The Debye temperature {Theta}{sub D} decreases approximately linearly with increasing Ga concentration, consistent with previous resonant ultrasound measurements and measured phonon dispersion curves. Calculations of {Theta}{sub D} from lattice dynamical models and from measured elastic constants C{sub 11}, C{sub 12}, and C{sub 44} are in agreement with the measured data. The linear coefficient of electronic specific heat {gamma} remains relatively constant as the Ga concentration increases, despite the fact that the magnetoelastic coupling increases. Band structure calculations show that this is due to the compensation of majority and minority spin states at the Fermi level.

36 MATERIALS SCIENCE↗

High-Temperature Heat Capacity and Thermal Extension of FeTa{sub 2}O{sub 6}

The heat capacity of synthesized iron tantalate FeTa{sub 2}O{sub 6} was measured in the temperature range of 323–1103 K by the ratio method using a thermal analyzer combining thermogravimetry and scanning calorimetry. The temperatures of phase transformations were determined. Structural changes and thermal expansion of oxide were studied in the range of 300–1173 K by high-temperature X-ray diffraction. The temperature dependences of the unit cell parameters were approximated by third order polynomials. The values of thermal expansion coefficients and anisotropy factors were calculated based on the obtained data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature structural variations and molar heat capacity of stolzite, PbWO{sub 4}

The crystal structure, thermal expansion and heat capacity of PbWO{sub 4} (mineral name stolzite) scintillator material were comprehensively studied over a wide temperature range. No phase transitions were found down to 2 K (I4{sub 1}/a, scheelite structure type). A distinct feature of the temperature induced structural variations in PbWO{sub 4} are the different thermal elongations of shorter and longer Pb-O distances. The low-temperature thermal expansion of PbWO{sub 4} was parameterized on the basis of the 1st order Grueneisen approximation using a Debye function for the internal energy with a Debye temperature of 237 K, a bulk modulus of 67 GPa and a Grueneisen parameter of 1.08. The expansion along the c-axis is about 2.5-3 times higher in the range 23-290 K than along the a-direction. This pronounced anisotropy of the thermal expansion arises from the arrangements of rigid tetrahedral WO{sub 4}{sup 2-} units along <100>-directions while Pb{sup 2+} cations occupy the sites between WO{sub 4}{sup 2-} in <001>-directions. - The thermal evolution of the PbWO{sub 4} volume parameterized in the framework of a 1st order Grueneisen approximation using the Debye model for the internal energy: (1)V(T)=V{sub 0}+({gamma})/K U(T)

36 MATERIALS SCIENCE↗

Differential Scanning Calorimetry Calibration and Heat Capacity

The differential scanning calorimeter (DSC) 404 F3 is a machine that heats up to 1500 degrees Celsius, and collects/evaluates thermal properties such as heat capacity, crystallization, glass transition, and more. The first part of the project is based around calibrating the DSC 404 F3 using the given procedures and manuals. This ensures that the DSC 404 F3 is working properly and does not have any issues moving forward. After the calibration is complete, the second part is to start testing. There will be tests conducted on known metals, such as steel and aluminum, in which there is data to compare it to. If the data collected is not accurate compared to its known values, further troubleshooting will need to ensue to ensure that the following process does not give wrong readings. Then, testing will begin for High Entropy Alloys(HEA) and the interesting issue with these is that there is no data to compare these to. The goal of finding the values of the HEA is to find a compatible alloy that we can use in future projects.

Szczech, Sebastian↗

Heat Capacity Mapping Mission (HCMM) Notification Efforts

To encourage wide use of the Heat Capacity Mapping Mission (HCMM) data, especially among the scientific community, special notifications were prepared to inform them about the data's availability, its form, and the procedures for obtaining them. To achieve the widest distribution to the primary audiences of interest, mailings were made to scientists associated with the OSTA Resource Observation Division programs and to scientific and professional societies and journals. Accompanying the notifications to the societies and journals were samples of the HCMM imagery and a description of the image's predominant characteristics. A follow-up survey was completed to determine the effectiveness of the HCMM notifications.

Source record↗

Very high-resolution heat-capacity measurements near the lambda point of helium

New measurements of the heat capacity of a sample of helium 3-mm high are reported, which extend to within 5 x 10 to the -8th deg of the lambda transition at the vapor pressure. From an analysis of the results allowing for the effect of gravity, the values -0.0127 + or - 0.0026 (2 sigma) for the exponent alpha (= alpha-prime) and 1,058 + or - 0.004 for the leading singularity ratio A/A-prime are obtained. These values are in closer agreement with the theoretical predictions than those reported previously.

Lipa, J. A.↗

Differential Scanning Calorimetry Calibration and Heat Capacity

The Differential Scanning Calorimeter(DSC) is used to find multiple properties ofmaterials such as heat capacity, melting points, crystallization, and more. Fermilabowns the NETZSCH DSC 404 F3 Pegasus to test novel material for a high poweredtargetry components. The DSC heats up to 1500 C, uses a platinum furnace, and Al 2 O 3 crucibles. In order for the DSC to produce consistent and correct data,calibration of the machine was necessary. Testing with the given calibration kit ofknown metals. Once calibrated, testing on novel materials for their specific heatcapacity ensues.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Application of Heat Capacity Mapping Mission data to regional geologic analysis for mineral and energy resource evaluation

Heat Capacity Mapping Mission thermal-inertia images of a diversity of terrains and geologic settings were examined in conjunction with topographic, geologic, geophysical, and LANDSAT data. The images were found to have attributes similar to bedrock maps. In the Cascades region, two new features were identified and a method was developed to characterize regional terranes using linear feature data. Two northeast-trending Lineaments were discovered in the Overthrust Belt of Montana and Idaho. The longer of the two extends from the Idaho-Oregon border, through the Idaho batholith and across the Lewis thrust. It coincides, along segments, with mapped faults and an aeromagnetic pattern change. A major lineament crossing the Colorado Plateau and the Southern Rocky Mountians was detected on several thermal-inertial images and evidence was found for the existence of a geologic discontinuity. Vegetation-covered areas in Richfield and the Silver City quadrangle (Arizona and New Mexico) displayed thermal-inertia differences within heavily vegetation areas although no apreciable correlation was found between vegetation cover and thermal inertia. Resistant ridges and knolls have high thermal inertias and thermal-inertia contrasts occurred at lithologic and fault contacts. In the heavy vegetated Pinaleno Mountains, Arizona, a Lithologic unit obscured on LANDSAT MSS data due to the vegetation cover, exhibited a thermal-inertia contrast with its surroundings.

Watson, K.↗

The heat capacity mapping mission

The first in a series of low cost Atmospheric Explorer Satellites, the Heat Capacity Mapping Mission (HCMM) was designed to evaluate the utility of thermal inertial and other thermal and reflectance data for: (1) discriminating bedrock and unconsolidated regolith types; (2) mapping soil moisture; (3) measuring plant canopy temperatures; (4) examining thermal circulation in large bodies of water; and (5) monitoring urban heat islands. Final reports from the HCMM investigator's program are beginning to define the utility of day/the night thermal data. Under favorable circumstances, some major rock types can be identified, soil moisture in extensive agricultural and alluvial terrains can be detected and at least semiqualitatively assessed; and circulation of currents in large bodies of water can be followed by noting thermal patterns.

Short, N. M.↗