Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “harmonization strategy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Multicyclic control of a helicopter rotor considering the influence of vibration, loads, and control motion

Weighted multiple linear regression is used to establish a transfer function matrix relationship between higher harmonic control inputs and transducer vibration outputs for a controllable twist rotor. Data used in the regression were taken from the test of a KAMAN controllable twist rotor conducted in the Ames Research Center's 40- by 80-Foot Wind Tunnel in June 1977. Optimal controls to minimize fixed system vibrational levels are calculated using linear quadratic regulatory theory with a control deflection penalty included in the performance criteria. Control sensitivity to changes in control travel, forward speed, and lift and propulsive forces is examined. It is found that the linear transfer matrix is a strong function of forward speed and a weak function of lift and propulsive force. An open-loop strategy is proposed for systems with limited control travel.

Brown, T. J.↗
DOE OSTI2025

Synchro-Waveform-Based Event Identification Using Multi-Task Time-Frequency Transform Networks

Influenced by the transient dynamics and reduced inertia characteristics of high-penetration renewable energy systems, power system events frequently exhibit distinct characteristics such as high-frequency components including wide-band oscillations and hyper-harmonics. This makes standard systems face challenges including significant latency and reduced accuracy due to limited data resolution. However, current methods face significant limitations, including insufficient pattern capture ability, low noise immunity, limited feature learning, and restricted localization capabilities, thereby hindering real-time performance. To tackle this issue, this paper proposed a novel synchro-waveform-based event identification approach via a Multi-task Time-frequency Transform Network (MTTNet). Initially, a Time-frequency Transform Block (TTB) is developed to extract both local and global information. The TTB leverages both Fourier and S-transforms to derive comprehensive time-frequency information from synchro-waveforms. Subsequently, a multi-task learning strategy is employed to identify the type and distinguish localization of events. Integrating the TTB and multi-task learning, the MTTNet is designed for synchro-waveform-based event identification, incorporating an adaptive weighting strategy and simplified computation for the S-transform. Two different datasets, comprising simulated and actual synchro-waveforms, are collected from the IEEE 123 bus system and a real-world high-penetration renewable energy system using a universal grid analyzer. Extensive experiments on various conditions are carried out. In conclusion, results demonstrated that the MTTNet consistently surpasses both basic and advanced baselines, with maximum improvements of 13.24% and 9.86%, respectively, while reducing the calculation burden by 15-19 times to achieve real-time event identification.

Event identification↗
DOE OSTI2022

Reduced Switching Frequency Finite Control Set Model Predictive Control (FCS-MPC) for DFIG

An enhanced Finite Control Set Model Predictive Control (FCS-MPC) strategy with a two-step prediction horizon for a Doubly-Fed Induction Generator (DFIG) is the focus of this paper. The DFIG and RL filter's discrete-time model is used in the proposed control scheme for a two-step prediction horizon of rotor and filter currents for the converter's eight possible switching states. Afterward, the control algorithm selects the ideal switching state, which minimizes currents' objective function. The proposed control scheme does not require a modulation stage for internal controllers. We use Lagrange extrapolations to predict the dynamic changes in currents. The switching frequency reduction is achieved by integrating an optimization constraint in the algorithm's cost function. Furthermore, the Total Harmonic Distortion level of currents is kept below 5%, according to IEEE Std 519-14. Obtained results reveal that the switching frequency of the DFIG converters is considerably reduced without losing control; it is reduced by 13.89KHz for the Grid Side Converter (GSC) and by 1.78KHz for the Rotor Side Converter (RSC).

doubly-fed induction generator↗
NASA NTRS1988

Stress and vibraton analyses of anisotropic shells of revolution

An efficient computational strategy is presented for reducing the cost of the stress and free vibration analyses of laminated anisotropic shells of revolution. The analytical formulation is based on a form of the Sanders-Budiansky shell theory including the effects of both the transverse shear deformation and the laminated anisotropic material response. The fundamental unknowns consist of the eight strain components, the eight stress resultants and the five generalized displacements of the shell. Each of the shell variables is expressed in terms of trigonometric functions (Fourier series) in the circumferential co-ordinate, and a three-field mixed finite element model is used for the discretization in the meridional direction. The shell response associated with a range of Fourier harmonics is approximated by a linear combination of a few global approximation vectors, which are generated at a particular value of the Fourier harmonic, within that range. The full equations of the finite element model are solved for only a single Fourier harmonic, and the response corresponding to the other Fourier harmonics is generated using a reduced system of equations with considerably fewer degrees of freedom.

Noor, Ahmed K.↗
NASA NTRS2005

Electromagnetic Interference to Flight Navigation and Communication Systems: New Strategies in the Age of Wireless

Electromagnetic interference (EMI) promises to be an ever-evolving concern for flight electronic systems. This paper introduces EMI and identifies its impact upon civil aviation radio systems. New wireless services, like mobile phones, text messaging, email, web browsing, radio frequency identification (RFID), and mobile audio/video services are now being introduced into passenger airplanes. FCC and FAA rules governing the use of mobile phones and other portable electronic devices (PEDs) on board airplanes are presented along with a perspective of how these rules are now being rewritten to better facilitate in-flight wireless services. This paper provides a comprehensive overview of NASA cooperative research with the FAA, RTCA, airlines and universities to obtain laboratory radiated emission data for numerous PED types, aircraft radio frequency (RF) coupling measurements, estimated aircraft radio interference thresholds, and direct-effects EMI testing. These elements are combined together to provide high-confidence answers regarding the EMI potential of new wireless products being used on passenger airplanes. This paper presents a vision for harmonizing new wireless services with aeronautical radio services by detecting, assessing, controlling and mitigating the effects of EMI.

Ely, Jay J.↗
DOE OSTI2021

Phase effects from strong gravitational lensing of gravitational waves

Assessing the probability that two or more gravitational wave (GW) events are lensed images of the same source requires an understanding of the properties of the lensed images. For short enough wavelengths where wave effects can be neglected, lensed images will generically have a fixed relative phase shift that needs to be taken into account in the lensing hypothesis. For non-precessing, circular binaries dominated by quadrupole radiation these lensing phase shifts are degenerate with either a shift in the coalescence phase or a detector and inclination dependent shift in the orientation angle. This degeneracy is broken by the presence of higher harmonic modes with |m| ≠ 2 in the former and |m| ≠ l in the latter. The presence of precession or eccentricity will also break this degeneracy. This implies that a lensed GW image will not necessarily be consistent with (unlensed) predictions from general relativity (GR). Therefore, unlike the conventional scenario of electromagnetic waves, strong lensing of GWs can lead to images with a modified phase evolution that can be observed. However, we find that templates with a shifted orientation angle remain a good approximation, with signal-to-noise ratio differences of less than 1% for mass ratios up to 1/18, and less than 5% for precession parameters up to 0.5 and eccentricities up to 0.4. We conclude that an optimal strong lensing search strategy would incorporate phase information in all stages of the identification of strong-lensing, with an exact treatment in the final assessment of the probability of multiple lensed events. Here, this work clarifies the role that strong lensing plays in the phase evolution of GWs: how it can lead to apparent deviations from GR, how it can affect the detectability of GW events, and how it can be exploited to help identify cases of strong gravitational lensing of gravitational wave sources.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Effects of Elevated Free-Stream Turbulence on Active Control of a Separation Bubble

The Effects of elevated free-stream turbulence (FST) on the natural and periodically excited separation bubbles were studied experimentally, due to the relevance of this flow to low-pressure turbine blades at low Reynolds numbers. A bubble was formed at the leading edge of a flat plate and the FST level was altered by placing a grid across the flow at different locations upstream of the plate. The mixing across the separated shear-layer, forming the free boundary of the bubble, increased due to the elevated FST and due to nominally two-dimensional periodic excitation, both flattening and shortening the bubble. Periodic excitation at frequencies that were at least an order of magnitude lower than those associated with the initial shear-layer instability, were very effective at low FST, because the amplitudes of the excitation frequency and its harmonic were amplified over the bubble. High frequency excitation (F+ 3, based on the length of the baseline low FST bubble) had a major effect close to the separation location, while farther downstream the excited fluctuations rapidly decayed in the reattachment region. Low frequency excitation, that generated waves comparable to the length of the unperturbed bubble (F+ 1) were less effective and their magnitude decayed at a slower rate downstream of reattachment. An increase in the level of the FST reduced the net effect of the periodic excitation on the mixing enhancement and subsequent reattachment process, probably due to a destructive interference between the nominally 2D excitation and the random (in space and time) FST, reducing the spanwise coherence and therefore the effectiveness of the current control strategy. However, even at the reduced effectiveness of 2D periodic excitation at elevated FST, it accelerated the reattachment process and the recovery rate of the reattached boundary layer, enhancing the boundary layer resistance to repeat separation and reducing its momentum loss further downstream.

Ashpis, D.↗
DOE OSTI2021

A Taxonomic Classification Approach for Global Spatio-temporal Data

The World Bank, World Health Organization, and other major vendors collectively provide thousands of global time series datasets that focus on issues of the environment, public health, economics, violence, education, and national security. Sorting these data into meaningful information requires the use of data mining techniques to cluster trends into an orderly and manageable number of cases. The World SpatioTemporal Analytics and Mapping (WSTAMP) project database (wstamp.ornl.gov) was developed to spatiotemporally harmonize global vendor data (23,300+ attributes, 200+ locations, 50+ years). Within the WSTAMP analytical environment, Dynamic Time Warping (DTW) has been a highly effective data-driven approach for clustering and mapping these time series into national spatiotemporal behavior maps. Two significant properties have surfaced from this work. First, several recognizable cluster patterns have emerged and persist across a range of locations, attributes, and time frames (e.g., increasing, decreasing, rebounding, peak, oscillating). Secondly, practitioners engaging WSTAMP have noted the explanatory and anticipatory value of these patterns and articulated particular interest in detecting them within the spatiotemporal cube. This need was addressed by shifting DTW-based clustering from an open ended, data-driven implementation to a taxonomic pattern matching approach. This paper presents the method including implementation strategies for visualization and human computer interaction and applies the approach to a sample data set and concludes with next steps.

Stewart, Robert↗
DOE OSTI2021

Advanced spectrometric methods for characterizing bio-oils to enable refineries to reduce fuel carbon intensity during co-processing

A promising approach for supplementing petroleum-derived fuels to support reductions in green-house gas emissions is to convert abundant biomass feedstocks into renewable carbon-rich oils using pyrolysis. However, the resultant bio-oils contain various oxygenated compounds that can impart acidity, chemical and thermal instability, and immiscibility with petroleum derived fuels, necessitating further upgrading to derive fuel blendstocks. Co-processing bio-oils and petroleum-derived liquids in existing refineries is a potentially near-term, cost-effective approach for upgrading bio-oils while reducing refinery carbon intensities. However, one cause for hesitation in co-processing bio-oils is limited comprehensive characterization and speciation of the bio-oil components. Advanced analytical techniques are currently under investigation to enable identification of elusive species in bio-oils, enabling researchers to develop strategies to mitigate catalyst deactivation agents and contaminants. This review provides a brief overview of several analytical methods commonly used to analyze bio-oils and their limitations. In addition, advanced techniques currently under development are discussed to further elucidate bio-oil components that may limit its end use. This will help inform the technical and economic feasibility of co-processing bio-oils with petroleum-derived liquids, therefore, improving the overall downstream processes for biofuels blendstock production.

09 BIOMASS FUELS↗
NASA NTRSDate not supplied

Data Fusion and Mining Techniques to Map Water Use and Drought across Spatial and Temporal Scales

As the world’s water resources come under increasing tension due to dual stressors of climate change and population growth, accurate knowledge of water consumption through evapotranspiration (ET) over a range in spatial scales will be critical in developing adaptation strategies. Remote sensing methods for monitoring consumptive water use (e.g, ET) are becoming increasingly important, especially in areas of significant water and food insecurity. One method to estimate ET from satellite-based methods, the Atmosphere Land Exchange Inverse (ALEXI) model uses the change in mid-morning land surface temperature to estimate the partitioning of sensible and latent heat fluxes which are then used to estimate daily ET. This presentation will outline several recent enhancements to the ALEXI modeling system, with a focus on global ET and drought monitoring. Until recently, ALEXI has been limited to areas with high resolution temporal sampling of geostationary sensors. The use of geostationary sensors makes global mapping a complicated process, especially for real-time applications, as data from as many as five different sensors are required to be ingested and harmonized to create a global mosaic. However, our research team has developed a new and novel method of using twice-daily observations from polar-orbiting sensors such as MODIS and VIIRS to estimate the mid-morning rise in LST that is used to drive the energy balance estimations within ALEXI. This allows the method to be applied globally using a single sensor (in this case, initially MODIS with a planned transition to VIIRS) rather than a global compositing of all available geostationary data. Other advantages of this new method include the higher spatial resolution provided by MODIS and VIIRS and the increased sampling at high latitudes where oblique view angles limit the utility of geostationary sensors. This presentation will focus on global applications for mapping water use and drought using data mining and data fusion across spatial scales extending from 5-km to 30-m “field-scale” estimates.

Christopher Hain↗
DOE OSTI2025

Water flipping and the oxygen evolution reaction on Fe 2 O 3 nanolayers

Hematite photoanodes are promising for the oxygen evolution reaction, however, their high overpotential (0.5-0.6 V) for water oxidation and limited photocurrent make them economically unviable at present. The work needed to orient dipoles at an electrode surface may be an overlooked contribution to the overpotential, especially regarding dipoles of water, the electron source in the oxygen evolution reaction (OER). Here, we employ second harmonic amplitude and phase measurements to quantify the number of net-aligned Stern layer water molecules and the work associated with water flipping, on hematite, an earth abundant OER semiconductor associated with a high overpotential. At zero applied bias, the pH-dependent potentials for Stern layer water molecule flipping exhibit Nernstian behavior. At positive applied potentials and pH 13, approximately one to two monolayers of water molecules points the oxygen atoms towards the electrode, favorable for the OER. The work associated with water flipping matches the cohesive energy of liquid water (44 kJ mol -1 ) and the OER current density is highest. This current is negligible at pH 5, where the work approaches 100 kJ mol -1 . Our findings suggest a causal relationship between the need for Stern layer water flipping and the OER overpotential, which may lead to developing strategies for decreasing the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A prediction of the thermodynamic, thermophysical, and mechanical properties of CrTaO 4 from first principles

It is reported that the self-forming CrTaO 4 oxide scale can protect refractory high-entropy alloys from oxidation, superior to Cr 2 O 3 . In this paper, the phase stability, mechanical, and thermal properties of three polymorphous phases of CrTaO 4 are systematically investigated from first-principles density functional theory calculations. The mechanical properties predicted using the strain–energy methods indicated that all three phases are mechanically stable. The temperature dependence of elastic constants and polycrystalline moduli of three phases demonstrated the thermal softening as temperature increase. The Helmholtz-free energies as a function of volume and temperature are derived from phonon dispersions within the quasi-harmonic approximation at six strained volumes. The calculated apparent bulk coefficients of thermal expansion of these three phases are evaluated, the highest value approximately 13.4× 10 –6 K –1 within a temperature range of 500–2000 K for the rutile I4 1 md phase. The lattice thermal conductivity calculated by the Debye–Callaway model suggested that the rutile type I4 1 md phase has the lowest value of approximately 2.1 W/m/K at 1800 K. The other two phases, C2/m and P2/c, exhibit higher values due to relatively lower Grüneisen parameters and larger phonon velocities. The melting point of CrTaO 4 is predicted to be between 1975 and 2449 K using ab initio molecular dynamics simulations. Finally, this work provides a comprehensive theoretical understanding of the thermodynamic, mechanical, and thermal properties for the new material CrTaO 4 and serves as an example of a viable computational design strategy for improved oxidation resistance of refractory alloys at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Cable Condition Monitoring Strategy for Safe and Reliable Plant Operation

Electrical cables provide essential functions, such as delivery of power or instrumentation signals for monitoring systems. Most cables installed in industrial applications are constructed with organic polymer insulations that can become brittle, crack, or degrade over time from exposure to harsh environmental conditions, such as elevated temperatures, moisture, vibration, mechanical shock, and radiation. This paper describes an overall strategy for assessing the health and managing the aging of cables during the operating life of an industrial facility. This strategy involves performing condition assessments and monitoring of electrical cables using both in situ and laboratory testing techniques. It includes in situ testing to identify anomalies in the circuits, such as degraded terminations, splices, connections, and degraded sections of cable insulation, as well as as-found evaluations to determine the current condition of installed cables. Furthermore, these cable condition evaluations provide important information about the current state of the cable circuits. Moreover, the test results can be used to trend/monitor age-related degradation and estimate the remaining useful life of installed cables.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Benchmarking Real-Time Control Platforms Using a Matlab/Simulink Coder with Applications in the Control of DC/AC Switched Power Converters

In the control of DC/AC switched power converters (SPC), one of the most important aspects to be considered is the selection of the real-time control platform. The real-time control platform must be able to meet the high performance efficiency and regulation requirements of the DC/AC SPC, as these typically operate at switching frequencies in the order of kHz to MHz. For this reason, the hardware characteristics of the ADC and PWM, and the processing capacity of the real-time control platform are of vital importance when implementing advanced digital controllers that maintain voltage and current levels within regulatory standards. In this context, we aimed to perform a comparative study of the computation times of different real-time control platforms when implementing different control strategies for DC/AC switched power converters. We also analyzed the impact of the real-time control platforms on the THD of the voltages generated by the DC/AC switched power converters. With the help of this paper, researchers and developers will have criteria to select which real-time control platform to use in real-time control for DC/AC SPC applications.

42 ENGINEERING↗
NASA NTRSDate not supplied

NASA’s Advance Information Systems Technology (AIST) Program

NASA’s Earth Science Technology Office (ESTO) develops early-stage technologies to enhance scientific understanding. ESTO’s technologies can be reliably and confidently applied to a broad range of science measurements and missions, as well as facilitate practical applications to benefit society at large. As the lead technology office within the Earth Science Division of the NASA Science Mission Directorate, ESTO is focused on the technological challenges inherent to space-based investigations of our planet's dynamic, interrelated systems. Through flexible, science-driven technology strategies and a competitive selection process, ESTO-funded technologies have supported numerous Earth science missions as well as commercial applications. From next generation sensors and instruments to communication and information systems, ESTO technologies enable many NASA missions and data services. The Advanced Information Systems Technology (AIST) Program is one focal area of ESTO. AIST innovates information system technologies that enable the development of new observing systems as well as agile science investigations through data analytics and artificial intelligence tools and algorithms. AIST utilizes an end-to-end development approach with the goal of infusing mature technologies into future missions, measurements, and analysis. One thrust of AIST is data exploitation and analysis using an analytic center framework to make observational data and model output more accessible and usable to scientists conducting specific investigations as well as to extract higher-level science content and information from the data. The framework accelerates scientific discovery by harmonizing the data, tools, and computational resources. NASA’s upcoming Surface, Biology and Geology (SBG) mission is one such mission whose data architecture will leverage many of the technologies developed through the AIST program. This talk will highlight current and future program development goals.

Laura Rogers↗
DOE OSTI2023

A Refinement-by-Superposition -Method for (curl)- and (div)-Conforming Discretizations

Here, we present refinement-by-superposition (RBS) hp-refinement infrastructure for computational electromagnetics (CEMs), which permits exponential rates of convergence. In contrast to dominant approaches to hp-refinement for continuous Galerkin methods, which rely on explicit constraint equations, the multilevel strategy presented drastically reduces the implementation complexity. Through the RBS methodology, enforcement of continuity occurs by construction, enabling arbitrary levels of refinement with ease, and without the practical (but not theoretical) limitations of constrained-node refinement. We outline the construction of the RBS hp-method for refinement with H (curl)- and H (div)-conforming finite cells. Numerical simulations for the 2-D finite element method (FEM) solution of the Maxwell eigenvalue problem demonstrate the effectiveness of RBS hp-refinement. As an additional goal of this work, we aim to promote the use of mixed-order (low- and high-order) elements in practical CEM applications.

42 ENGINEERING↗
DOE OSTI2025

Building a quantum computing architecture using 3D superconducting cavities

Quantum computers promise advantages over classical machines for solving certain complex problems, but building processors that truly deliver this advantage remains a central challenge, particularly due to limited coherence times. Three-dimensional superconducting radio-frequency (SRF) cavities offer an attractive platform due to their exceptionally long lifetimes. However, since these harmonic systems require nonlinear elements, such as transmons, for control, additional losses are often introduced. In this talk, I will present a multimode quantum system based on an elliptical SRF cavity hosting two cavity modes weakly coupled to an ancillary transmon circuit. This architecture is carefully engineered to preserve coherence while enabling efficient control. By optimizing the design to mitigate transmon-induced decoherence, we realize single-photon lifetimes of 20.6 ms and 15.6 ms in the two modes, with pure dephasing times exceeding 40 ms. Using sideband interactions and error-resilient protocols, such as measurement-based correction and post-selection, we demonstrate high-fidelity state control, including preparation of Fock states up to N=20 with fidelities above 95% (to our knowledge, the highest reported to date), as well as high-fidelity two-mode entanglement. These results highlight 3D SRF cavities as a robust foundation for qudit-based quantum information processing, harnessing the large Hilbert space of cavity modes. I will conclude by outlining strategies to further enhance coherence in both cavities and ancilla qubits, and discuss pathways toward scaling this architecture into a larger quantum computing platform.

Roy, Tanay [Fermilab]↗