Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “first principles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

First principles study of the structural, electronic, and optical properties of Sn 2+ -doped ZnO–P 2 O 5 glasses [First principles study of the structural, electronic and optical properties of Sn-doped ZnO-P2O5 glasses]

The atomic-structural, electronic, and optical properties of Sn-doped ZnO–P 2 O 5 glasses are examined using combined semi-empirical and density functional theory calculations. From model structures for two different ZnO–P 2 O 5 glass compositions, it is found that these glasses consist of nearly ideal tetrahedral PO 4 unit and largely distorted ZnO 4 and ZnO 5 units. The concentration of ZnO 5 units is calculated to increase and exceed that of ZnO 4 as the amount of ZnO in the glass is increased. Also, the concentration of terminal oxygen atoms shared by two Zn neighbors is largely increased for 70ZnO:30P 2 O 5 (70:30) glass compared to 60:40 glass, which can be rationalized by electrostatic bond strength calculations. Regarding medium-range order, calculations show that Q 1 and Q 2 structures (where Q n refers to structures containing n bridging oxygen atoms on PO 4 tetrahedra) are dominant for the 60:40 glass, while Q 0 and Q 1 prevail for the 70:30 glass, in good agreement with experimental observations. For the Sn-doped ZnO–P 2 O 5 glass, various Sn coordination geometries are found, with trigonal pyramidal SnO 3 and largely distorted pyramidal SnO 4 configurations being dominant and a small fraction of two-fold and five-fold coordinated Sn configurations also present. From combined cluster and glass model calculations, two-fold coordinated Sn are found to exhibit slightly smaller optical transition energy than three-fold and four-fold coordinated Sn. However, local variations in coordination structures throughout the glass likely result in a broad singlet transition (S 0 →S 1 ) around 5.4 eV for all the different Sn configurations. Finally, a triplet transition (S 0 →T 1 ) driven by spin-orbit coupling can occur around 4.5 – 4.8 eV, but the magnitude of this transition is predicted to be much smaller than the spin-allowed singlet transition.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Controlling the magnetic and optical responses of a MoS 2 monolayer by lanthanide substitutional doping: a first-principles study

Here, the electronic, magnetic and optical properties of lanthanide substitutional doping (~2% concentration) on the MoS 2 monolayer have been investigated within the density functional theory formalism together with the Hubbard correction (DFT+U). The dopants investigated include Ce, Eu, Gd, Lu and Tm. The calculated dopant substitutional energies under both Mo-rich and S-rich conditions suggest that it is possible to experimentally realize the lanthanide doped MoS 2 monolayer systems. The Eu, Gd and Tm dopants induce strong magnetization in the host lattice. The electronic structure calculations reveal that the dopants have a p-type character and they exhibit a half-metallic behavior in the Gd and Eu doped systems. A dilute magnetic semiconducting behavior can also be realized in Gd, Eu and Tm doped systems by slightly tuning the Fermi level. All the dopants refine the optical responses of the host system with the onset of the optical absorption edge shifting to lower energies within the visible range (red shift phenomenon). We observe an optical anisotropy for two different directions of the electric field (E) polarizations, i.e. parallel, E∥, and perpendicular, E⊥, to the xy-plane. Lanthanide substitutional doping significantly influences the electron energy loss spectra (EELS), absorption spectra, and dielectric properties of the host MoS 2 monolayer. Furthermore, we notice that lanthanide substitutional doping could enhance the photocatalytic properties of the MoS 2 monolayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations

The pressure-induced structural phase transition in the intermediate-valence compound CeNi has been investigated by x-ray and neutron powder diffraction techniques. It is shown that the structure of the pressure-induced CeNi phase (phases) can be described in terms of the Pnma space group. Equations of state for CeNi on both sides of the phase transition are derived and an approximate P-T phase diagram is suggested for P<8 GPa and T<300 K. The observed Cmcm→Pnma structural transition is then analyzed using density functional theory calculations, which successfully reproduce the ground state volume, the phase transition pressure, and the volume collapse associated with the phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Structure-dependent vibrational dynamics of Mg(BH 4 ) 2 polymorphs probed with neutron vibrational spectroscopy and first-principles calculations

We investigated the structure-dependent vibrational properties of different Mg(BH 4 ) 2 polymorphs (α, β, γ, and δ phases) with a combination of neutron vibrational spectroscopy (NVS) measurements and density functional theory (DFT) calculations, with emphasis placed on the effects of the local structure and orientation of the BH 4 - anions. DFT simulations closely match the neutron vibrational spectra. The main bands in the low-energy region (20–80 meV) are associated with the BH4 - librational modes. The features in the intermediate energy region (80–120 meV) are attributed to overtones and combination bands arising from the lower-energy modes. The features in the high-energy region (120–200 meV) correspond to the BH 4 - symmetric and asymmetric bending vibrations, of which four peaks located at 140, 142, 160, and 172 meV are especially intense. There are noticeable intensity distribution variations in the vibrational bands for different polymorphs. We can explain these differences using the spatial distribution of BH 4 - anions within various structures. An example of the possible identification of products after the hydrogenation of MgB 2 , using NVS measurements, is presented. Our results provide fundamental insights of benefit to researchers currently studying these promising hydrogen-storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

A first-principles study of cementite (Fe{sub 3}C) and its alloyed counterparts: Elastic constants, elastic anisotropies, and isotropic elastic moduli

A comprehensive computational study of elastic properties of cementite (Fe{sub 3}C) and its alloyed counterparts (M{sub 3}C (M = Al, Co, Cr, Cu, Fe, Hf, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, W, Zr, Cr{sub 2}FeC and CrFe{sub 2}C) having the crystal structure of Fe{sub 3}C is carried out employing electronic density-functional theory (DFT), all-electron PAW pseudopotentials and the generalized gradient approximation for the exchange-correlation energy (GGA). Specifically, as a part of our systematic study of cohesive properties of solids and in the spirit of materials genome, following properties are calculated: (i) single-crystal elastic constants, C{sub ij}, of above M{sub 3}Cs; (ii) anisotropies of bulk, Young’s and shear moduli, and Poisson’s ratio based on calculated C{sub ij}s, demonstrating their extreme anisotropies; (iii) isotropic (polycrystalline) elastic moduli (bulk, shear, Young’s moduli and Poisson’s ratio) of M{sub 3}Cs by homogenization of calculated C{sub ij}s; and (iv) acoustic Debye temperature, θ{sub D}, of M{sub 3}Cs based on calculated C{sub ij}s. We provide a critical appraisal of available data of polycrystalline elastic properties of alloyed cementite. Calculated single crystal properties may be incorporated in anisotropic constitutive models to develop and test microstructure-processing-property-performance links in multi-phase materials where cementite is a constituent phase.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Materials Databases Infrastructure Constructed by First Principles Calculations: A Review

The First Principles calculations, especially the calculation based on High-Throughput Density Functional Theory, have been widely accepted as the major tools in atom scale materials design. The emerging super computers, along with the powerful First Principles calculations, have accumulated hundreds of thousands of crystal and compound records. The exponential growing of computational materials information urges the development of the materials databases, which not only provide unlimited storage for the daily increasing data, but still keep the efficiency in data storage, management, query, presentation and manipulation. This review covers the most cutting edge materials databases in materials design, and their hot applications such as in fuel cells. By comparing the advantages and drawbacks of these high-throughput First Principles materials databases, the optimized computational framework can be identified to fit the needs of fuel cell applications. The further development of high-throughput DFT materials database, which in essence accelerates the materials innovation, is discussed in the summary as well.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A First–Principles–Based Sub–Lattice Formalism for Predicting Off–Stoichiometry in Materials for Solar Thermochemical Applications: The Example of Ceria

Theoretical models that reliably can predict off-stoichiometry in materials via accurate descriptions of underlying thermodynamics are crucial for energy applications. For example, transition-metal and rare-earth oxides that can tolerate a large number of oxygen vacancies, such as CeO 2 and doped CeO 2 , can split water and carbon dioxide via a two-step, oxide-based solar thermochemical (STC) cycle. The search for new STC materials with a performance superior to that of state-of-the-art CeO 2 can benefit from predictions accurately describing the thermodynamics of oxygen vacancies. The sub-lattice formalism, a common tool used to fit experimental data and build temperature-composition phase diagrams, can be useful in this context. Here, sub-lattice models are derived solely from zero-temperature quantum mechanics calculations to estimate fairly accurate temperature- and oxygen-partial-pressure-dependent off-stoichiometries in CeO 2 and Zr-doped CeO 2 . Physical motivations for deriving some of the “excess” sub-lattice model parameters directly from quantum mechanical calculations, instead of fitting to minimize deviations from experimental and/or theoretical data, are identified. As a result, important limitations and approximations of the approach used are specified and extensions to multi-cation oxides are also suggested to help identify novel candidates for water and carbon dioxide splitting and related applications.

08 HYDROGEN↗
DOE OSTI2018

Modeling the adsorbate coverage distribution over a multi-faceted catalytic grain in the presence of an electric field: O/Fe from first principles

The impact of an external electric field on the concerted behavior of oxygen over a multi-faceted catalytic Fe grain is determined via the interpolation of ab initio models of oxygen adsorption on Fe(100), Fe(110), and Fe(111) in the presence of an external electric field. The application of both negative and positive electric fields weaken the adsorption strength for oxygen on all three surface facets, with Fe(110) experiencing the greatest effect. Kinetic models of a multi-faceted catalytic Fe grain show that the average oxygen coverage over the grain surface is reduced under the influence of both a negative and positive electric field, which are consistent with phase diagram results at comparable pressures. Furthermore, we show that there is a weak synergistic effect between a Pd promoter and a positive electric field on the oxygen adsorption energy, i.e. the Pd promoter and electric field combination weaken the oxygen adsorption energy to a greater degree than the simple addition of both components separately. Overall, the work shows that the application of an applied external electric field may be a useful tool in fine-tuning chemical properties of Fe-based catalysts in hydrodeoxygenation applications.

Bray, Jacob E.↗
DOE OSTI2016

High pressure stability analysis and chemical bonding of Ti{sub 1-x}Zr{sub x}N alloy: A first principle study

First-principles pseudo-potential calculations have been performed to analyze the stability of Ti{sub 1-x}Zr{sub x}N alloy under high pressures. The first order phase transition from B1 to B2 phase has been observed in this alloy at high pressure. The variation of lattice parameter with the change in concentration of Zr atom in Ti{sub 1-x}Zr{sub x}N is also reported in both the phases. The calculations for density of states have been performed to understand the alloying effects on chemical bonding of Ti-Zr-N alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗