Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A meshing framework for digital twins for extrusion based additive manufacturing

Additive manufacturing (AM) allows for manufacturing of complex three-dimensional geometries not typically realizable with standard manufacturing practices. The internal microstructure of AM components has a significant impact on mechanical, vibrational, and shock properties and permits richer design space when this is controllable. Due to complex interactions of internal geometry of an extrusion-based AM component, it is common practice to assume homogeneous behavior or to perform characterization testing on specific toolpath configurations. To avoid testing or material waste, it is necessary to develop a consistently accurate numerical simulation framework with relevant boundary value problems that can handle the complicated geometry of internal material microstructure present in AM components. Herein, a framework is proposed to directly create computational meshes suitable for finite element analysis (FEA) of the fine-scale features generated from extrusion-based AM tool paths to maintain a strong process–structure–property-performance linkage. This mesh can be manually or automatically analyzed using standard FEA simulations such as quasi-static preloading or modal analysis. The framework allows an in-silico assessment of a target AM geometry where fine-scale features greatly impact quantities of design interest such as in soft elastomeric lattices where toolpath infill can greatly influence the self-contact of a structure in compression, which we use as a motivating exemplar. This approach greatly reduces both time and resource waste present in traditional build and test design cycles for non-intuitive design spaces, and acts as a tool for use in the production of a key component of a digital twin, a mesh suitable for finite element analysis. In conclusion, it also further allows for the exploration of toolpath infill to optimize component properties beyond simple linear properties such as density and stiffness.

Additive manufacturing↗
DOE OSTI2024

The use of digital thread for reconstruction of local fiber orientation in a compression molded pin bracket via deep learning

A deep convolutional neural network (DCNN) was used for microstructure reconstruction using artificial intelligence (MR-AI) by predicting local average fiber orientation distributions (FOD) in a 3D prepreg platelet molded composite (PPMC) pin bracket. To train the MR-AI model, surface strain fields from residual stresses simulated in PPMC plates were used as the input to the DCNN. A training dataset included PPMC plates with various degrees of global fiber alignment, based on the information obtained from high-fidelity flow simulation of a pin bracket. Further, the MR-AI model was then deployed to analyze FOD in the 3D pin bracket by conducting thermo-elastic residual stress analysis. Initially, the MR-AI model was established entirely on the synthetic simulation data. Then, a μCT scan of a physically molded pin bracket was used to create a finite element model that provided data for additional validation of the DCNN model. For the μCT scan finite element pin bracket the MR-AI model predicted the distribution of fiber orientation tensor components with MAE of 0.10 indicating a global prediction error of 10%. For the flow simulated pin bracket, the MR-AI model predicted the distribution of fiber orientation tensor components with a global prediction error of 11%. The MR-AI model showed the ability to predict regions of varying alignment in the base and flange of the pin bracket. The proposed MR-AI methodology allows for rapid prediction of FOD in geometrically complex parts and offers a promising path to detecting unique fiber orientation states in molded components.

42 ENGINEERING↗
DOE OSTI2025

On optimal control of hybrid dynamical systems using complementarity constraints

Optimal control for switch-based dynamical systems is a challenging problem in the process control literature. In this study, we model these systems as hybrid dynamical systems with finite number of unknown switching points and reformulate them using non-smooth and non-convex complementarity constraints as a mathematical program with complementarity constraints (MPCC). We utilize a moving finite element based strategy to discretize the differential equation system to accurately locate the unknown switching points at the finite element boundary and achieve high-order accuracy at intermediate non-collocation points. We propose a globalization approach to solve the discretized MPCC problem using a mixed NLP/MILP-based strategy to converge to a non-spurious first-order optimal solution. The method is tested on three dynamic optimization examples, including a gas–liquid tank model and an optimal control problem with a sliding mode solution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A TOpographic Mapping (ATOM) Method to Design Magnetic Cores

Wireless power transfer offers safe, convenient, and efficient way of charging electric vehicles. Ongoing research is targeting wireless charging pad design optimization; designing the magnetic component is the most important part of the coupler design because the magnetic part determines the coupling factor and efficiency. Optimizing the coil layout and geometry as well as ferrite design requires finite elements analysis based modeling and simulation for minimized core losses, maximized magnetic coupling, and minimized material use for cost-effectiveness. Although parametric finite element analysis or emerging artificial intelligence methods can generate very accurate results, simulation times are extremely long. To address this issue, this study proposes a simple, effective core design called A TOpographic Mapping (ATOM). The proposed design is based on the design of magnetic core by using the magnetic flux distribution. The thickness of the core increases with increasing magnetic flux density, forming a variable thickness core design with less material and minimized core losses compared to conventional designs. A superimposing method is used to create an optimal design for a rotational magnetic field-based system. According to simulation results, the ATOM design reduces the required material volume by 13.19% and yields the lowest core loss and highest mutual inductance compared to other designs. In addition, misalignment, electromagnetic interference, and thermal performance were evaluated for the proposed design.

Aydin, Emrullah [Oak Ridge National Laboratory (OR↗
DOE OSTI2024

Lifting MGARD: Construction of (pre)wavelets on the interval using polynomial predictors of arbitrary order

MGARD (MultiGrid Adaptive Reduction of Data) is an algorithm for compressing and refactoring scientific data, based on the theory of multigrid methods. The core algorithm is built around stable multilevel decompositions of conforming piecewise linear $C^0$ finite element spaces, enabling accurate error control in various norms and derived quantities of interest. In this work, we extend this construction to arbitrary order Lagrange finite elements $\mathbb{Q}_p$, $p \geq 0$, and propose a reformulation of the algorithm as a lifting scheme with polynomial predictors of arbitrary order. Additionally, a new formulation using a compactly supported wavelet basis is discussed, and an explicit construction of the proposed wavelet transform for uniform dyadic grids is described.

Reshniak, Viktor [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Identification Uncertainty in Inverse Material Model Parameter Determination: A Sensitivity‐Based Decision Process for Load Path Selection

This research proposes a sensitivity-based framework for selecting the optimal prescribed loading path for a biaxial cruciform specimen. Optimality here is determined by the direction and magnitude of the prescribed displacement that minimizes the influence of random noise on the material model parameter identification. Using simulated experimental data based on finite element simulation, in this work, we identify the material model parameters of a Ludwik hardening model and plane stress implementation of the Hill-48 yield criterion using finite element model updating (FEMU). Our analysis reveals that the identification (or estimator) uncertainty of model parameters depends on the displacement boundary conditions (i.e., loading sequence) and the ground-truth value of the individual parameters. Optimal experimental design (OED) criteria based on the Fisher information matrix were investigated to mitigate indecision in the choice of optimal load path when the identification uncertainty of different material model parameters optimized at different load paths. The determinant of the Fisher information matrix was chosen here as the more useful metric due to its ability to capture uncertainty of the most influential material model parameters. The proposed framework demonstrates potential for real-time automated load step selection using scalar criteria derived prior to mechanical loading. The framework can be generalized to other geometries, boundary conditions and material models, allowing this procedure to be utilized for different experimental configurations and materials.

Fayad, Samuel S. [University of Illinois at Urbana↗
DOE OSTI2024

Experimental Investigation of Low-Frequency Distributed Acoustic Sensor Responses to Two Parallel Propagating Fractures

Low-frequency distributed acoustic sensing (LF-DAS) is a diagnostic tool for hydraulic fracture propagation with far-field monitoring using fiber optic sensors. LF-DAS senses strain rate variation caused by stress field change due to fracture propagation. Fiber optic sensors are installed in the monitoring wells in the vicinity of a fractured well. From the strain responses, fracture propagation can be evaluated. To understand subsurface conditions with multiple propagating fractures, a laboratory-scale hydraulic fracture experiment was performed simulating the LF-DAS response to fracture propagation with embedded distributed optical fiber strain sensors under these conditions. The experiment was performed using a transparent cube of epoxy with two parallel radial initial flaws centered in the cube. Fluid was injected into the sample to generate fractures along the initial flaws. The experiment used distributed high-definition fiber optic strain sensors with tight spatial resolutions. The sensors were embedded at two different locations on opposite sides of the initial flaws, serving as observation/monitoring locations. We also employed finite element modeling to numerically solve the linear elastic equations of equilibrium continuity and stress–strain relationships. The measured strains from the experiment were compared to simulation results from the finite element model. The experimentally derived strain and strain-rate waterfall plots from this study show the responses to both fractures propagating, while the fracture at the lower position took most of the fluid during the experiment. Interestingly, a fracture first began propagating from the upper flaw of the two flaws, but once the lower fracture was initiated, it grew much faster than the upper fracture. Both fibers were intercepted by the lower fracture, further verifying the strain signature as a fracture is approaching and intersecting an offset fiber.

Chemistry↗
DOE OSTI2025

Advanced System Thermal Fluids Solver Development for SAM

This work summarizes a feasibility study on testing numerical algorithms that are suitable and efficient for advanced system analysis code development under the mutli-physics framework, MOOSE. The key is the implementation of a high-order one-dimensional staggered-grid finite volume method (SG-FVM), and its direct interaction with the linear/nonlinear solver, PETSc. Leveraging the existing capabilities of the SAM code, significant code coverages were established in the finite volume method code. This in turn allows for a suite of test problems with different problem sizes and levels of complexity to be used to quantify the performance improvement of the finite volume method code. As evidently shown in this study, the implemented SG-FVM demonstrated superior performance improvement against a direct finite element method implementation through MOOSE for the wide range of selected problems. On two computer systems, the speedup was observed to be significant, with at least one order of magnitude of solving time reduction. In addition, for a complex reactor model, transient simulation was performed using the finite volume method code, the results of which agree very well with the reference results from the finite element method code. Overall, this study demonstrates a successful feasibility study on the proposed numerical algorithms and software structure to support advanced system analysis tool development. In this work, short-term priority development and testing items were identified, and long-term code adoption and integration plans were made for the eventual deployment of the finite volume method in the SAM code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

PVmesh [SWR-24-123]

PVmesh is an open-source Python tool for generating high-fidelity, adaptive finite-element meshes for photovoltaic modules. It supports multilayer panel geometries, frame details, and mounting zones that are often difficult to mesh robustly with generic workflows. Built on Gmsh, PVmesh automates geometry construction, partitioning, domain/boundary tagging, and export for downstream finite-element solvers.

He, Xin [National Laboratory of the Rockies (NLR),↗
DOE OSTI2024

Poromechanical cohesive interface element with combined Mode I-II cohesive zone elastoplasticity for simulating fracture in fluid-saturated porous media

A combined Mode I-II cohesive zone (CZ) elasto-plastic constitutive model, and a two-dimensional (2D) cohesive interface element (CIE) are formulated and implemented at small strain within an ABAQUS User Element (UEL) for simulating 2D crack nucleation and propagation in fluid-saturated porous media. Here, the CZ model mitigates problems of convergence for the global Newton-Raphson solver within ABAQUS, which when combined with a viscous stabilization procedure allows for simulation of post-peak response under load control for coupled poromechanical finite element analysis, such as concrete gravity dam stability analysis. Verification examples are presented, along with a more complex ambient limestone-concrete wedge fracture experiment, water-pressurized concrete wedge experiment, and concrete gravity dam stability analyses. A calibration procedure for estimating the CZ parameters is demonstrated with the limestone-concrete wedge fracture process. For the water-pressurized concrete wedge fracture experiment it is shown that the inherent time-dependence of the poromechanical CIE analysis provides a good match with experimental force versus displacement results at various crack mouth opening rates, yet misses the pore water pressure evolution ahead of the crack tip propagation. This is likely a result of the concrete being partially-saturated in the experiment, whereas the finite element analysis assumes fully water saturated concrete. For the concrete gravity dam analysis, it is shown that base crack opening and associated water uplift pressure leads to a reduced Factor of Safety, which is confirmed by separate analytical calculations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Effects of midplane density gradient in the propagation of high-harmonic fast waves considering high temperature anisotropy in the scrape-off layer of NSTX-U

High-Harmonic Fast Wave (HHFW) heating experiments in NSTX have shown that up to 60% of the injected power can be lost in the Scrape-Off Layer (SOL) when the density is above the fast wave cutoff density in front of the antenna, for which the fast wave is able to propagate into the plasma. This work models HHFW propagation in the SOL plasmas of NSTX-U using a 2D divertor SOL profile derived from the pressure assumption and the finite element temperature solution, which accounts for the high anisotropy of heat conduction in a 2D axisymmetric geometry. In this work, the two-dimensional axisymmetric SOL temperature profile is first evaluated by solving the steady-state non-linear heat conduction equation, in which thermal conductivity depends on temperature, using a finite element approach in the Petra-M workbench. A 2D density profile is then obtained from a prescribed density profile at the outer midplane assuming pressure is uniform along a flux tube in the SOL. This approach results in density and temperature profiles in which the strong asymmetric nature of heat conduction between the parallel and perpendicular background magnetic field is successfully captured. Furthermore, this work focuses on investigating the effect of the SOL plasma density profile on parasitic HHFW propagation in the SOL. The simulation results show that the radial gradient of the density profile affects the wavefield propagation in the SOL. As the density profile broadens, the wavefield intensity and its poloidal extent are reduced in the SOL, and the core coupling increases. Similarly, as shown by collisional power deposition, a proxy for power absorption, the fraction of power deposited in the SOL decreases with a broadening profile.

HHFW↗
DOE OSTI2024

Accelerating Thermochemical Equilibrium Calculations for Nuclear Reactor Applications

Thermochemical properties play a key role in modeling and simulation of several key phenomena in nuclear reactors. There has been an increasing interest in incorporating CALPHAD-based formulations in multiphysics simulations including for Molten Salt Reactors where knowledge of phase evolution of the salt and the chemical potentials of various elements are of utmost importance in source term analyses and redox control. However, the size of such simulations is often limited by the high computational cost of full thermodynamic equilibrium calculations. This work discusses the current efforts aimed at accelerating thermochemical equilibrium calculations for multiphysics simulations performed using the open-source finite element / finite volume code Multiphysics Object Oriented Simulation Environment (MOOSE) [1]. While several methods have been proposed for accelerating phase equilibrium calculations [2], most focus on relatively small systems and often rely on a- priori knowledge of the state-space of the system. Nuclear materials, however, are often multi-component systems owing to the evolution of composition under irradiation and an approach based on a-priori mapping of phase diagram is often not enough. This work is aimed at demonstrating an on-the-fly surrogate modeling framework that uses active learning to reduce the number of full equilibrium calculations that must be performed. By combining with efficient coupling approaches, the surrogate framework helps in reducing the computational cost of thermodynamic equilibrium informed multiphysics simulations of nuclear materials. The performance is benchmarked against full coupling with the thermochemistry library Thermochimica [3]. This work uses a machine learning based approach for constructing surrogate models to predict the stable phases in a multicomponent system. The surrogates were constructed using neural networks and Gaussian process classification. In this work, we compare the relative performance of the two methods. We also demonstrate the use of caching previous calculations by interpolating the values from nearest neighbors. References [1] Lindsay, A.D., et al. "2.0 – MOOSE: Enabling massively parallel multiphysics simulation", SoftwareX, 20 (2022): 101202. [2] Roos, W.A. and Zietsman J.H. "Accelerating complex chemical equilibrium calculations – A Review", Calphad, 77 (2022): 102380. [3] Piro, M.H.A., et al. "The thermochemistry library Thermochimica", Computational Materials Science, 67 (2013): 266-272.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Brittle failure analysis and modeling of high-burnup PWR fuel cladding alloys

The aim of this research is the development of methods for predicting mechanical behavior and identification of limiting conditions to prevent brittle failure of high-burnup (HBU) pressure water reactor (PWR) fuel cladding alloys. A finite element (FE) model of the ring compression test (RCT) was created to analyze the failure behavior of zirconium-based alloys with radial hydrides during the RCT. An elastic-plastic material model describes the zirconium alloy. The stress-strain curve needed for the elastic-plastic material model was derived by inverse finite element analyses. Cohesive zone modeling is used to reproduce sudden load drops during RCT loading. Based on the failure mechanism in non-irradiated ZIRLO (R) claddings, a micro-mechanical model was developed that distinguishes between brittle failure along hydrides and ductile failure of the zirconium matrix. Two different cohesive laws representing these types of failure are present in the same cohesive interface. The key differences between these constitutive laws are the cohesive strength, the stress at which damage initiates, and the cohesive energy, which is the damage energy dissipated by the cohesive zone. Statistically generated matrix-hydride distributions were mapped onto the cohesive elements and simulations with focus on the first load drop were performed. Computational results are in good agreement with the RCT results conducted on high-burnup M5 (R) samples. It could be shown that crack initiation and propagation strongly depend on the specific configuration of hydrides and matrix material in the fracture area.

Simbruner, Kai↗
DOE OSTI2025

A Domain-Decomposed A-ϕ Formulation Based on Lagrange Multipliers for Low-Frequency Problems

A domain-decomposed A-ϕ formulation based on Lagrange multipliers is proposed to simulate low-frequency elec- tromagnetic problems. This method partitions the computational domain into smaller subdomains, allowing each subdomain to be independently formulated using Lagrange multipliers as Dirichlet boundary conditions, while ensuring continuity of the fields across the interfaces. A mixed finite element method, utilizing both vector and scalar basis functions, is employed to discretize the formulation, resulting in a global system to be solved. The proposed method is validated using TEAM Problem 7 at 50 Hz, demonstrating its effectiveness in handling complex geometries and addressing the low-frequency breakdown issues commonly encountered in traditional finite element methods.

Hossain, Amzad↗
DOE OSTI2025

Radiation-induced bowing of SiC/SiC composites under neutron flux gradients—integral experimental data for model validation

Here, the radiation-induced swelling of SiC and its composites, including strong dependencies on temperature and dose, can drive significant lateral bowing in the presence of temperature and/or dose gradients. In recent years, simulations have been performed to assess the extent of bowing in SiC composite light-water reactor (LWR) fuel cladding and boiling water reactor (BWR) channel boxes. However, to date, no integral experimental data exist to validate these models. This work provides the first experimental bowing evaluation of three ∼380 mm long SiC composite specimens irradiated under varying neutron dose gradients (∼50°C–60°C, 0.03–0.06 dpa): two tubes (∼9.8 mm diameter) and a miniature BWR channel box (∼30 mm square). The measured radiation-induced length swelling (∼0.3%–0.7% linear) was consistently 10%–21% higher than values obtained from 3D finite element structural analyses with inputs from 3D radiation transport calculations. This discrepancy could be at least partially explained by differences in dose rate (∼10 -8 dpa/s) compared to the literature data (∼10-6 dpa/s) used to establish the dose-to-swelling correlations in the model. Nevertheless, the modeled bowing magnitudes (<2 mm) obtained from finite element analyses and simple analytical equations were within the bounds of the experimental measurements for all specimens. With improved confidence in the ability to predict the structural response and measure the macroscopic deformations, future experiments will target transient bowing under neutron flux gradients at representative LWR temperatures and assess whether grid spacers can mitigate the tens of millimeters of bowing that would otherwise be expected in ∼4 m long LWR components.

bowing↗
DOE OSTI2026

Advancing SiC clad fuel performance model: bridging micro- and macro-scale models and experimental validation

This report presents a workflow for advancing fuel performance modeling of SiC composite cladding for light-water reactors by linking microscale, experimental data-informed finite element analysis with rod-scale fuel performance codes such as BISON. The workflow uses X-ray computed tomography (XCT) to capture the actual geometry and processing-induced defects of as-fabricated SiC composite tube specimens, particularly porosity and wall-thickness variations, and converts the segmented XCT volumes into image-based finite element meshes for high fidelity structural analysis.

Koyanagi, Takaaki [Oak Ridge National Laboratory (↗
DOE OSTI2025

Supporting Fusion at the Idaho National Laboratory

The Fusion Safety Program at Idaho National Laboratory has supported efforts to develop magnetic and inertial confinement fusion energy devices for commercial energy power development since 1979. In addition to our DOE less than hazard category 3 tritium handling facility STAR, we also have unique capabilities such as an adaptation of the severe accident code MELCOR developed specifically for fusion, and integrated modeling capabilities using the MOOSE Finite Element Code. In this presentation, we cover our unique experimental capabilities for investigating tritium sorption, solubility and permeation including in molten salts. We also show the application of MELCOR-TMAP to predict thermal hydraulics and tritium migration in normal and accident conditions. Finally, we demonstrate high-fidelity modeling capabilities found within the open-source MOOSE finite element framework as well as fuel-cycle modeling using TMAP8.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

PDE-constrained high-order mesh optimization

Here, we present a novel framework for PDE-constrained r-adaptivity of high-order meshes. The proposed method formulates mesh movement as an optimization problem, with an objective function defined as a convex combination of a mesh quality metric and a measure of the accuracy of the PDE solution obtained via finite element discretization. The proposed formulation achieves optimized, well-defined high-order meshes by integrating mesh quality control, PDE solution accuracy, and robust gradient regularization. We adopt the Target-Matrix Optimization Paradigm to control geometric properties across the mesh, independent of the PDE of interest. To incorporate the accuracy of the PDE solution, we introduce error measures that control the finite element discretization error. The implicit dependence of these error measures on the mesh nodal positions is accurately captured by adjoint sensitivity analysis. Additionally, a convolution-based gradient regularization strategy is used to ensure stable and effective adaptation of high-order meshes. We demonstrate that the proposed framework can improve mesh quality and reduce the error by up to 10 times for the solution of Poisson and linear elasto-static problems. The approach is general with respect to the dimensionality, the order of the mesh, the types of mesh elements, and can be applied to any PDE that admits well-defined adjoint operators.

Computer science↗