Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “field study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

AmeriFlux FLUXNET-1F US-RGo Glenn County Organic Rice Farm

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-RGo Glenn County Organic Rice Farm. This is the FLUXNET version of the carbon flux data for the site US-RGo Glenn County Organic Rice Farm produced by applying the standard ONEFlux (1F) software. Site Description - Organically farmed medium-grain brown rice field in Glenn County, California. Part of a five-year, ground-truthing field study under the DOE ARPA-E SMARTFARM project. Field check is approx. 7 ha in size (1,250 ft by 250 ft), part of a 75+ acre site in several checks with commercial rice over rice rotation on Tehama silt loam, management practices include winter cover crops and AWD.

Schuppenhauer, Michael R.↗
DOE OSTI2022

BioGeoChemistry at Interfaces (LLNL SFA OBER FY22 Program Management and Performance Report)

The focus of the BioGeoChemistry at Interfaces SFA is to identify and quantify the biogeochemical processes and the underlying mechanisms that control actinide mobility in an effort to reliably predict and control the cycling and migration of actinides in the environment. The research approach includes: (1) Field Studies that capture actinide behavior on the timescale of decades (Research Thrust 1), and (2) Fundamental Laboratory Studies that isolate specific biogeochemical processes observed in the field (Research Thrust 2). These Research Thrusts are underpinned by the unique capabilities and staff expertise at Lawrence Livermore National Laboratory, allowing the BioGeoChemistry at Interfaces SFA to advance our understanding of actinide migration behavior in the environment, and serve as an resource for environmental radiochemistry research internationally. In the past year, our greater focus on transient redox gradients across stratified waters, sediment-water interfaces, and mineral-water interfaces extended our research beyond actinides to address processes controlling cycling of redox-sensitive metals more broadly. Nevertheless, Research Thrusts 1 and 2 are guided by the following broad central hypotheses that were developed during our last program review held at the end of FY18: Thrust 1 Hypothesis: Biogeochemical processes occurring on the timescale of years to decades lead to greater actinide recalcitrance in sediments and limits their migration in surface and groundwater. Thrust 2 Hypothesis: Long-term biogeochemical processes include mineral and surface alteration, which leads to stabilization of actinide surface associations or incorporation into mineral precipitates. Our strategic goal is to use the knowledge gained from our Science Plan to advance our understanding of the behavior of actinides and other radionuclides (e.g. Cs) and provide DOE with the scientific basis for remediation and long-term stewardship of DOE’s legacy sites. More broadly, we will enhance our understanding of transport phenomena in environmental systems sciences with a particular emphasis on environmentally relevant (long-term) timescales. While we retain our focus on actinide biogeochemistry, our increased focus on overall biogeochemical processes occurring at unique Test Bed locations associated with this SFA provides fundamental information on abiotic and biotic redox processes that control the cycling of redox sensitive metals under dynamic and transient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

LLNL SFA OBER FY23 Program Management and Performance Report: BioGeoChemistry at Interfaces

The focus of the BioGeoChemistry at Interfaces SFA has been to identify and quantify the biogeochemical processes and the underlying mechanisms that control actinide mobility in an effort to reliably predict and control the cycling and migration of actinides in the environment. The research approach has included: (1) Field Studies that capture actinide behavior on the timescale of decades (Research Thrust 1), and (2) Fundamental Laboratory Studies that isolate specific biogeochemical processes observed in the field (Research Thrust 2). These Research Thrusts are underpinned by the unique capabilities and staff expertise at Lawrence Livermore National Laboratory, allowing the BioGeoChemistry at Interfaces SFA to advance our understanding of actinide migration behavior in the environment, and serve as a resource for environmental radiochemistry research internationally (Figure 1). In FY23, our SFA research focused on transient redox gradients across stratified waters, sediment-water interfaces, and mineral-water interfaces to address processes controlling cycling of redox-sensitive metals. Nevertheless, Research Thrusts 1 and 2 are guided by the following broad central hypotheses that were developed during our last program review held at the end of FY18: Thrust 1 Hypothesis: Biogeochemical processes occurring on the timescale of years to decades lead to greater actinide recalcitrance in sediments and limits their migration in surface and groundwater. Thrust 2 Hypothesis: Long-term biogeochemical processes include mineral and surface alteration, which leads to stabilization of actinide surface associations or incorporation into mineral precipitates. Our strategic goal is to use the knowledge gained from our Science Plan to advance our understanding of the behavior of actinides and other radionuclides (e.g. Cs) and provide DOE with the scientific basis for remediation and long-term stewardship of DOE’s legacy sites. More broadly, we are improving our understanding of transport phenomena in environmental systems sciences with a particular emphasis on environmentally relevant (long-term) timescales. While we retained some of our historical focus on actinide biogeochemistry this past fiscal year, biogeochemical processes occurring at unique Test Bed locations associated with this SFA provide fundamental information on abiotic and biotic redox processes that control the cycling of redox sensitive metals under dynamic and transient conditions. Furthermore, in collaboration with SFA teams at Argonne National Laboratory, our SFA has begun to transition away from the current research focus and develop a new research program in terrestrial wetland systems. The Terrestrial Wetland Function and Resilience SFA program plan will be delivered to the Environmental System Science (ESS) program within BER at the end of FY23.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rye-soybean double-crop: planting method and N fertilization effects in the North Central US

Double-cropping winter rye cover crops (CC) with soybean in the North Central US could help with the global effort to sustainably intensify agriculture. Studies addressing the management of these systems are limited. Therefore, a field study was conducted from 2017 to 2019 in Central Iowa, US to evaluate winter rye CC biomass production, aboveground N accumulation, estimated economics, estimated within-field energy balance and estimated greenhouse gas (GHG) emissions under three N application rates (0, 60, 120 kg N ha –1 ) and three planting methods (pre- and post-harvest broadcast and post-harvest drilling). Averaged over N rates, all planting methods resulted in >5.0 Mg ha –1 year –1 rye aboveground biomass dry matter. Averaged over the 2-year study and compared with unfertilized treatments, applying 60 kg N ha –1 produced 1.1 Mg ha –1 more aboveground biomass (6.1 vs 5.0 Mg ha –1 ), accumulated 30 kg ha –1 more N in aboveground biomass (88 vs 58 kg N ha –1 ), and led to 20 GJ ha –1 more net energy. Biomass production was not significantly higher with 120 kg N ha –1 compared with the 60 kg N ha –1 rate. Even when accounting for an estimated 0.75 Mg ha –1 of above ground rye biomass left in the field after harvesting, more N was removed than applied at the 60 kg N ha –1 rate. The minimum rye prices over the 2-year study needed for double-cropping winter rye CC to be profitable (breakeven prices) averaged $117 and $104 Mg –1 for the 0 and 60 kg N ha –1 rates, which factors in estimated soybean yield reductions in 2019 compared with local averages but not off-site transportation. GHG emissions were estimated to increase approximately threefold between the unfertilized and 60 kg N ha –1 rates without considering bioenergy offsets. While environmental tradeoffs need further study, results suggest harvesting fertilized rye CC biomass before planting soybean is a promising practice for the North Central US to maximize total crop and net energy production.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Deploying a Model Predictive Traffic Signal Control Algorithm - A Field Deployment Experiment Case Study

This paper presents a field deployment experiment of a real-time traffic signal control algorithm. We implemented the model predictive control (MPC) algorithm based on the virtual phase-link (VPL) model. We selected the deployment locations and times based on an energy saving potential concept. We developed a set of experiment systems, which included sensing, processing, and actuating components, to enable field deployment. We tested the systems rigorously before the experiment days. We reported the key procedures on the experiment days, including the steps taken, the real-time control procedure, and the monitoring of the experiment. We evaluated the impact of the deployment by looking at the changes in delay and energy consumption.

deployment↗
DOE OSTI2025

Combining organic amendments with enhanced rock weathering shifts soil carbon storage in croplands

Enhanced rock weathering (ERW) involves applying crushed silicate minerals to cropland soils to remove carbon dioxide and stabilize the global climate. If practiced widely, ERW has the potential to mitigate climate change and improve soil health and crop productivity. However, most ERW studies emphasize inorganic carbon (IC) chemistry, using model-based estimates and short-term mesocosms. Limited field data exist on how ERW interacts with organic amendments to affect organic carbon (C) cycling in soils. In a three-year field study in conventionally managed, irrigated maize fields, we monitored how key soil variables responded to crushed rock-alone, and in combination with compost and/or biochar. We measured weathering indicators (pH, major cations, and IC contents) and organic fractions, including particulate organic matter (POM), mineral-associated organic matter (MAOM), microbial biomass C, and water-extractable organic C. Rock-alone treatments increased weathering proxies (pH and IC) and showed an increasing trend in POM and MAOM, relative to control. In contrast, combining crushed rock with organic amendments resulted in lower soil organic C and nitrogen (N) concentrations (in both POM and MAOM) compared to organic amendments alone, though IC increased in the rock+compost treatment. Combining rock with both compost and biochar (compost/biochar) significantly lowered MAOM-N compared to compost/biochar alone. Overall, co-applying rock with organic inputs may promote weathering and C accrual but slow the accrual rate of organic C and N relative to organic amendments alone. Quantifying these trade-offs over multiple years and scales is critical to integrating ERW with existing soil health practices and climate mitigation strategies.

Biological and medical sciences↗
DOE OSTI2024

Validation of High Resolution Atmospheric and Dispersion Simulations

Weather models typically operate on averages of 1 km or more. This averages out fine scale turbulence. This results in smooth laminar flows and rapid vertical motions are usually averaged out. In this study, those fine scaled features were simulated for a 2013 field study of transport and diffusion of a tracer gas. Parameterized subgrid turbulence was required to produce dilution representative of observations. Despite this, the simulation with the finest grid and contained parameterized subgrid turbulence produced dilution that was consistent with observations.

THOMAS, ANDREW↗
DOE OSTI2020

Impact of installation faults in air conditioners and heat pumps in single-family homes on U.S. energy usage

To ensure that new residential air conditioners and heat pumps operate optimally, care must be taken during the initial system design and installation to avoid missteps that immediately degrade a system’s performance. Laboratory and simulation studies have quantified the impact that faults can have on capacity and efficiency. Field studies have demonstrated that installation-related faults are commonplace. However, the national impact of installation-related faults cannot be accurately estimated by only simulating a limited number of homes at several fault levels because of the variety of home characteristics and climates involved. In our analysis, we use an improved residential building stock simulation tool to predict the annual energy increase and additional utility costs resulting from two common installation faults: indoor airflow rate and refrigerant charge level. Our method considers the wide range of building characteristics and climate zones of the U.S. housing stock. We use existing field data to develop fault intensity probability distributions to inform our analysis. The study shows that these two faults result in approximately 20.7 TWh/y of additional energy use for central air conditioners and air-source heat pumps in U.S. single-family detached homes, which is a 9% increase over baseline (no-fault) usage, costing homeowners approximately $2.5 billion annually on utility bills. Air-source heat pumps are responsible for a disproportionate fraction of this energy use increase because of the larger number of operating hours compared to central air conditioners and the sensitivity of heating mode performance to the faults analyzed compared to cooling mode.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Bifacial PV Module Energy Modeling Validation Study

The cost delta between monofacial and bifacial photovoltaic (PV) modules was decreasing in 2018 when this study was initially proposed, making bifacial modules an attractive offering. However, there were limited field studies available that could be considered utility-scale representative, and PV module manufacturers were stating large ranges for the expected energy yield improvements of bifacial technology. This generated uncertainties regarding bifacial performance gains and the actual LCOE (levelized cost of energy). There was also relatively low confidence in the industry’s energy modeling tools’ ability to accurately predict bifacial energy yield, meaning that early adopters of bifacial modules were not able to fully account for the increased energy yield in their energy and financial models. The intent of this project was to provide the solar industry with greater certainty on the energy yield gains of bifacial modules and provide higher confidence in the ability for different energy modeling software to model bifacial PV site performance. Achieving this would allow for bifacial technology to become bankable (i.e. accepted by Independent Engineers, site financiers and other PV site stakeholders), offering a step change in PV site performance that had not been seen since the widespread adoption of the single-axis tracker. Over the course of this study other economic factors including a significant tariff exemption for bifacial modules resulted in accelerated adoption of bifacial technology throughout the US utility scale solar segment. The number of early adopters increased rapidly, and with many investors accepting this module choice the question of bifacial bankability was seemingly answered faster than expected. However, PVEL’s study has still achieved significant accomplishments in demonstrating the accuracy of bifacial modeling across three different software platforms. The results of this study have shown that the mean biased error (MBE) between the field data and the predicted values from all three software platforms were aligned with a maximum MBE of 1.3% and a minimum MBE of -1.8%.

14 SOLAR ENERGY↗
DOE OSTI2021

(U) Validation and Optimization of a 1-Dimensional Quasi-Isentropic Compression Model Using a Functionally Graded Material Flyer Plate

The fields studying highly compressed materials have been around for many years. These fields have given birth to better understandings of the solar fusion cycle and the liquid-metallic core of Jupiter. The highest pressures achieved have been at the National Ignition Facility (NIF) and more recently, the Z-Machine. One method to achieve higher levels of compression is to use quasi-isentropic (QI) compression. In practice, this means minimizing the amount of temperature increase of the target material. In their paper, J.H. Nguyen et. al. manufactured a functionally graded material (FGM) in order to help them achieve QI compression. The aim of the study described in this paper is to validate a 1-dimensional (1D) FLAG model that uses an FGM flyer to compress a copper (Cu) target. Once validated, the density/composition profile of the FGM is varied and optimized using Markov Chain Monte Carlo, specifically using a Metropolis-Hastings algorithm to find the optimal FGM profile that minimizes the temperature increase in the copper.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cauchy data space and multisymplectic formulation of conformal classical field theories

In this article we inspect the dynamics of classical field theories with a local conformal behavior. Our interest in the multisymplectic setting comes from its suitable description of field theories, and the conformal character has been added to account for field theories that are scale invariant, flat spaces, and because some conformal fields can be exactly solved or classified. In particular, we will solve the example of a conformal scalar field using the geometric Hamilton–Jacobi theory that is explicitly proposed for conformal fields on a multisymplectic manifold. To complete the geometric approach to study field theories, we propose the Hamilton–Jacobi theory for conformal fields in a Cauchy data space, in which space and time are split separately and the dynamics is depicted in an infinite-dimensional manifold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Variation in the contribution of macroinvertebrates to wood decomposition as it progresses

Abstract Although necromass decay rates are limited by the slowest portions to decompose, most decomposition studies examine only the earliest stage of decay. As such, these studies run the risk of yielding misleading results regarding the relative contributions of different decomposers. For example, the contributions of macroinvertebrates to wood decomposition remain mostly unknown beyond the first 50% of mass lost, despite drastic changes in substrate conditions over time. We sought to clarify how the macroinvertebrate contribution to decay changes over the course of wood decomposition in the Southeastern United States—a region with a long history of wood decomposition research. To this end, we (1) compiled data from published studies comparing wood decay with and without macroinvertebrates; and (2) conducted a field study assessing wood mass loss, with and without macroinvertebrate access, at three sites across the region over four years. With these combined data, we analyzed macroinvertebrate contribution as decay progressed, revealing a quadratic relationship, wherein macroinvertebrate contribution increased early in decomposition and then began to decline as decay progressed. Strong local site effects, particularly the abundance and activity of termites, determine the time required for wood to reach this point of mass loss.

Environmental Sciences & Ecology↗
DOE OSTI2023

AmeriFlux US-RGF Stanislaus County Forage Farm

This is the AmeriFlux version of the carbon flux data for the site US-RGF Stanislaus County Forage Farm. Site Description - Commercially farmed field in Stanislaus County, California. Part of a multi-year, ground-truthing field study under the DOE ARPA-E SMARTFARM project (https://arpa-e.energy.gov/news-and-media/blog-posts/smartfarm-changing-whats-possible-agriculture). Field is approx. 31.3 ha in size (1,300 ft by 2,600 ft), part of a 176+ acre site in several fields with commercial corn-wheat rotation for silage, in combination with manure application.

Schuppenhauer, Michael R.↗
DOE OSTI2024

AmeriFlux FLUXNET-1F US-RGF Stanislaus County Forage Farm

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-RGF Stanislaus County Forage Farm. This is the FLUXNET version of the carbon flux data for the site US-RGF Stanislaus County Forage Farm produced by applying the standard ONEFlux (1F) software. Site Description - Commercially farmed field in Stanislaus County, California. Part of a multi-year, ground-truthing field study under the DOE ARPA-E SMARTFARM project (https://arpa-e.energy.gov/news-and-media/blog-posts/smartfarm-changing-whats-possible-agriculture). Field is approx. 31.3 ha in size (1,300 ft by 2,600 ft), part of a 176+ acre site in several fields with commercial corn-wheat rotation for silage, in combination with manure application.

Schuppenhauer, Michael R.↗
DOE OSTI2021

BioGeoChemistry at Interfaces (LLNL SFA OBER FY21 Program Management and Performance Report)

The focus of the BioGeoChemistry at Interfaces (formerly BioGeoChemistry of Actinides) SFA is to identify and quantify the biogeochemical processes and the underlying mechanisms that control actinide mobility in an effort to reliably predict and control the cycling and migration of actinides in the environment. The research approach includes: (1) Field Studies (Research Thrust 1) that capture actinide behavior on the timescale of decades and (2) Fundamental Laboratory Studies (Research Thrust 2) that isolate specific biogeochemical processes observed in the field. These Research Thrusts are underpinned by the unique capabilities and staff expertise at Lawrence Livermore National Laboratory, allowing the BioGeoChemistry at Interfaces SFA to advance our understanding of actinide migration behavior in the environment, and serve as an international resource for environmental radiochemistry research (Figure 1).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Displacement Analysis of Geothermal Field Based on PSInSAR And SOM Clustering Algorithms A Case Study of Brady Field, Nevada—USA

The availability of free and high temporal resolution satellite data and advanced SAR techniques allows us to analyze ground displacement cost-effectively. Our aim was to properly define subsidence and uplift areas to delineate a geothermal field and perform time-series analysis to identify temporal trends. A Persistent Scatterer Interferometry (PSI) algorithm was used to estimate vertical displacement in the Brady geothermal field located in Nevada by analyzing 70 Sentinel-1A Synthetic-Aperture Radar (SAR) images, between January 2017 and December 2019. To classify zones affected by displacement, an unsupervised Self-Organizing Map (SOM) algorithm was applied to classify points based on their behavior in time, and those clusters were used to determine subsidence, uplift, and stable regions automatically. Finally, time-series analysis was applied to the clustered data to understand the inflection dates. The maximum subsidence is –19 mm/yr with an average value of –6 mm/yr within the geothermal field. The maximum uplift is 14 mm/yr with an average value of 4 mm/yr within the geothermal field. The uplift occurred on the NE of the field, where the injection wells are located. On the other hand, subsidence is concentrated on the SW of the field where the production wells are located. The coupling of the PSInSAR and the SOM algorithms was shown to be effective in analyzing the direction and pattern of the displacements observed in the field.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Spatial patterns of snow distribution in the sub-Arctic

Abstract. The spatial distribution of snow plays a vital role in sub-Arctic and Arctic climate, hydrology, and ecology due to its fundamental influence on the water balance, thermal regimes, vegetation, and carbon flux. However, the spatial distribution of snow is not well understood, and therefore, it is not well modeled, which can lead to substantial uncertainties in snow cover representations. To capture key hydro-ecological controls on snow spatial distribution, we carried out intensive field studies over multiple years for two small (2017–2019; ∼ 2.5 km2) sub-Arctic study sites located on the Seward Peninsula of Alaska. Using an intensive suite of field observations (> 22 000 data points), we developed simple models of the spatial distribution of snow water equivalent (SWE) using factors such as topographic characteristics, vegetation characteristics based on greenness (normalized different vegetation index, NDVI), and a simple metric for approximating winds. The most successful model was random forest, using both study sites and all years, which was able to accurately capture the complexity and variability of snow characteristics across the sites. Approximately 86 % of the SWE distribution could be accounted for, on average, by the random forest model at the study sites. Factors that impacted year-to-year snow distribution included NDVI, elevation, and a metric to represent coarse microtopography (topographic position index, TPI), while slope, wind, and fine microtopography factors were less important. The characterization of the SWE spatial distribution patterns will be used to validate and improve snow distribution modeling in the Department of Energy's Earth system model and for improved understanding of hydrology, topography, and vegetation dynamics in the sub-Arctic and Arctic regions of the globe.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

On the mechanism of marine fouling-prevention performance of oil-containing silicone elastomers

For many decades, silicone elastomers with oil incorporated have served as fouling-release coating for marine applications. In a comprehensive study involving a series of laboratory-based marine fouling assays and extensive global field studies of up to 2-year duration, we compare polydimethylsiloxane (PDMS) coatings of the same composition loaded with oil via two different methods. One method used a traditional, one-pot pre-cure oil addition approach (o-PDMS) and another method used a newer post-cure infusion approach (i-PDMS). The latter displays a substantial improvement in biofouling prevention performance that exceeds established commercial silicone-based fouling-release coating standards. We interpret the differences in performance between one-pot and infused PDMS by developing a mechanistic model based on the Flory–Rehner theory of swollen polymer networks. Using this model, we propose that the chemical potential of the incorporated oil is a key consideration for the design of future fouling-release coatings, as the improved performance is driven by the formation and stabilization of an anti-adhesion oil overlayer on the polymer surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗