Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental warming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

The DeepMIP Contribution to PMIP4: Experimental Design for Model Simulations of the EECO, PETM, and pre-PETM (version 1.0)

Past warm periods provide an opportunity to evaluate climate models under extreme forcing scenarios, in particular high ( greater than 800 ppmv) atmospheric CO2 concentrations. Although a post hoc intercomparison of Eocene (approximately 50 Ma) climate model simulations and geological data has been carried out previously, models of past high-CO2 periods have never been evaluated in a consistent framework. Here, we present an experimental design for climate model simulations of three warm periods within the early Eocene and the latest Paleocene (the EECO, PETM, and pre-PETM). Together with the CMIP6 pre-industrial control and abrupt 4(times) CO2 simulations, and additional sensitivity studies, these form the first phase of DeepMIP - the Deep-time Model Intercomparison Project, itself a group within the wider Paleoclimate Modeling Intercomparison Project (PMIP). The experimental design specifies and provides guidance on boundary conditions associated with palaeogeography, greenhouse gases, astronomical configuration, solar constant, land surface processes, and aerosols. Initial conditions, simulation length, and output variables are also specified. Finally, we explain how the geological data sets, which will be used to evaluate the simulations, will be developed.

climate models↗
DOE OSTI2021

Understanding Mechanistic Controls of Heterotrophic CO 2 and CH 4 Fluxes in a Peatland with Deep Soil Warming and Atmospheric CO 2 Enrichment

This project was funded from August 1, 2016 – July 31, 2019 with a no-cost extension until July 31, 2020 (and built upon the PI-team’s previous work supported by DE-SC0008092 (June 2012 – September 2016)). Our project focused on the Spruce and Peatland Responses Under Changing Environments (SPRUCE: https://mnspruce.ornl.gov/) experiment taking place in the S1 Bog in the Marcell Experimental Forest in northern Minnesota, USA. The SPRUCE project is a unique whole-ecosystem experiment where a bog peatland is subjected to warming and atmospheric carbon dioxide (CO 2 ) enrichment. Deep peat heating of the soil profile (to a depth of at least 2 m) began in June of 2014 and was followed by whole-ecosystem warming in August of 2015. Warming treatments included +0 °C, +2.25 °C, +4.5 °C, +6.75 °C, and +9 °C above ambient temperatures, with 2 experimental chambers for each warming treatment. Half of these chambers received ambient atmospheric CO 2 concentrations, and starting in June of 2016, the other half received elevated atmospheric CO 2 concentrations (~ +500 ppm(v) above ambient). Our primary goal with this project was to explore the mechanistic controls of anaerobic carbon cycling – especially the dynamics of the potent greenhouse gas methane (CH 4 ) – within the SPRUCE experiment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Kilowatt Reactor Using Stirling TechnologY (KRUSTY) Cold Critical Measurements

For the Kilowatt Reactor Using Stirling TechnologY (KRUSTY) cold critical experiments, the KRUSTY component critical configuration was modified by the addition of parts that would be required for cold, warm, and hot critical experiments (including the vacuum chamber as well as the heat pipes and associated parts). Reactivity measurements were performed on the KRUSTY cold critical experimental configurations with the goal of obtaining reactivity-worth measurements on the beryllium oxide (BeO) reflector and the boron carbide (B 4 C) control rod parts. The resulting data are consistent and allow for accurate identification of the BeO and B 4 C part thicknesses required to achieve the excess reactivity needed for the KRUSTY warm and hot experimental configurations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Host Species–Microbiome Interactions Contribute to Sphagnum Moss Growth Acclimation to Warming

Sphagnum moss is the dominant plant genus in northern peatlands responsible for long-term carbon accumulation. Sphagnum hosts diverse microbial communities (microbiomes), and its phytobiome (plant host + constituent microbiome + environment) plays a key role in nutrient acquisition along with carbon cycling. Climate change can modify the Sphagnum -associated microbiome, resulting in enhanced host growth and thermal acclimation as previously shown in warming experiments. However, the extent of microbiome benefits to the host and the influence of host–microbe specificity on Sphagnum thermal acclimation remain unclear. Here, we extracted Sphagnum microbiomes from five donor species of four peatland warming experiments across a latitudinal gradient and applied those microbiomes to three germ-free Sphagnum species grown across a range of temperatures in the laboratory. Using this experimental system, we test if Sphagnum 's growth response to warming depends on the donor and/or recipient host species, and we determine how the microbiome's growth conditions in the field affect Sphagnum host growth across a range of temperatures in the laboratory. After 4 weeks, we found that the highest growth rate of recipient Sphagnum was observed in treatments of matched host–microbiome pairs, with rates approximately 50% and 250% higher in comparison to maximum growth rates of non-matched host–microbiome pairs and germ-free Sphagnum , respectively. We also found that the maximum growth rate of host–microbiome pairs was reached when treatment temperatures were close to the microbiome's native temperatures. Our study shows that Sphagnum's growth acclimation to temperature is partially controlled by its constituent microbiome. Strong Sphagnum host–microbiome species specificity indicates the existence of underlying, unknown physiological mechanisms that may drive Sphagnum 's ability to acclimatize to elevated temperatures. Together with rapid acclimation of the microbiome to warming, these specific microbiome–plant associations have the potential to enhance peatland resilience in the face of climate change.

acclimation↗
DOE OSTI2020

Short- and long-term responses of photosynthetic capacity to temperature in four boreal tree species in a free-air warming and rainfall manipulation experiment

Abstract High latitude forests cope with considerable variation in moisture and temperature at multiple temporal scales. To assess how their photosynthetic physiology responds to short- and long-term temperature variation, we measured photosynthetic capacity for four tree species growing in an open-air experiment in the boreal-temperate ecotone `Boreal Forest Warming at an Ecotone in Danger' (B4WarmED). The experiment factorially manipulated temperature above- and below-ground (ambient, +3.2 °C) and summer rainfall (ambient, 40% removal). We measured A/Ci curves at 18, 25 and 32 °C for individuals of two boreal (Pinus banksiana Lamb., Betula papyrifera Marsh.) and two temperate species (Pinus strobus L., Acer rubrum L.) experiencing the long-term warming and/or reduced-rainfall conditions induced by our experimental treatments. We calculated the apparent photosynthetic capacity descriptors VCmax,Ci and Jmax,Ci and their ratio for each measurement temperate. We hypothesized that (i) VCmax,Ci and Jmax,Ci would be down-regulated in plants experiencing longer term (e.g., weeks to months) warming and reduced rainfall (i.e., have lower values at a given measurement temperature), as is sometimes found in the literature, and that (ii) plants growing at warmer temperatures or from warmer ranges would show greater sensitivity (steeper slope) to short-term (minutes to hours) temperature variation. Neither hypothesis was supported as a general trend across the four species, as there was not a significant main effect (across species) of either warming or rainfall reduction on VCmax,Ci and Jmax,Ci. All species markedly increased VCmax,Ci and Jmax,Ci (and decreased their ratio) with short-term increases in temperature (i.e., contrasting values at 18, 25 and 32 °C), and those responses were independent of long-term treatments and did not differ among species. The Jmax,Ci:VCmax,Ci ratio was, however, significantly lower across species in warmed and reduced rainfall treatments. Collectively, these results suggest that boreal trees possess considerable short-term plasticity that may allow homeostasis of VCmax,Ci and Jmax,Ci to a longer term temperature treatment. Our results also caution against extrapolating results obtained under controlled and markedly contrasting temperature treatments to responses of photosynthetic parameters to more modest temperature changes expected in the near-term with climate warming in field conditions.

Forestry↗
NASA NTRS1991

Thermal performance of a liquid hydrogen tank multilayer insulation system at warm boundary temperatures of 630, 530, and 152 R

The results are presented of a study conducted to obtain experimental heat transfer data on a liquid hydrogen tank insulated with 34 layers of MLI (multilayer insulation) for warm side boundary temperatures of 630, 530, and 150 R. The MLI system consisted of two blankets, each blanket made up of alternate layers of double silk net (16 layers) and double aluminized Mylar radiation shields (15 layers) contained between two cover sheets of Dacron scrim reinforced Mylar. The insulation system was designed for and installed on a 87.6 in diameter liquid hydrogen tank. Nominal layer density of the insulation blankets is 45 layers/in. The insulation system contained penetrations for structural support, plumbing, and electrical wiring that would be representative of a cryogenic spacecraft. The total steady state heat transfer rates into the test tank for shroud temperatures of 630, 530, 152 R were 164.4, 95.8, and 15.9 BTU/hr respectively. The noninsulation heat leaks into the tank (12 fiberglass support struts, tank plumbing, and instrumentation lines) represent between 13 to 17 pct. of the total heat input. The heat input values would translate to liquid H2 losses of 2.3, 1.3, and 0.2 pct/day, with the tank held at atmospheric pressure.

Stochl, Robert J.↗
NASA NTRS1991

Thermal performance of a liquid hydrogen tank multilayer insulation system at warm boundary temperatures of 630, 530, and 152 R

The results are presented of a study conducted to obtain experimental heat transfer data on a liquid hydrogen tank insulated with 34 layers of MLI (multilayer insulation) for warm side boundary temperatures of 630, 530, and 150 R. The MLI system consisted of two blankets, each blanket made up of alternate layers of double silk net (16 layers) and double aluminized Mylar radiation shields (15 layers) contained between two cover sheets of Dacron scrim reinforced Mylar. The insulation system was designed for and installed on an 87.6 in. diameter liquid hydrogen tank. Nominal layer density of the insulation blankets is 45 layers/in. The insulation system contained penetrations for structural support, plumbing, and electrical wiring that would be representative of a cryogenic spacecraft. The total steady state heat transfer rates into the test tank for shroud temperatures of 630, 530, 152 R were 164.4, 95.8, and 15.9 BTU/hr, respectively. The noninsulation heat leaks into the tank (12 fiberglass support struts, tank plumbing, and instrumentation lines) represent between 13 to 17 pct. of the total heat input. The heat input values would translate to liquid H2 losses of 2.3, 1.3, and 0.2 pct/day, with the tank held at atmospheric pressure.

Stochl, Robert J.↗
DOE OSTI2024

Reproducibility of real-time time-dependent density functional theory calculations of electronic stopping power in warm dense matter

Real-time time-dependent density functional theory (TDDFT) is widely considered to be the most accurate available method for calculating electronic stopping powers from first principles, but there have been relatively few assessments of the consistency of its predictions across different implementations. This problem is particularly acute in the warm dense regime, where computational costs are high and experimental validation is rare and resource intensive. We report a comprehensive cross-verification of stopping power calculations in conditions relevant to inertial confinement fusion conducted using four different TDDFT implementations. We find excellent agreement among both the post-processed stopping powers and relevant time-resolved quantities for alpha particles in warm dense hydrogen. We also analyze sensitivities to a wide range of methodological details, including the exchange-correlation model, pseudopotentials, initial conditions, observable from which the stopping power is extracted, averaging procedures, projectile trajectory, and finite-size effects. We show that among these details, pseudopotentials, trajectory-dependence, and finite-size effects have the strongest influence, and we discuss different strategies for controlling the latter two considerations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Performance enhancement of direct-drive shock-augmented ignition inertial fusion implosions through shock timing optimization

Shock-augmented ignition (SAI) [R. H. H. Scott et al., Phys. Rev. Lett. 129, 195001 (2022)] is an alternative inertial confinement fusion concept that is designed to achieve high energy gain by combining improved resilience to instabilities with enhanced fuel compression. In SAI, lower implosion velocities can improve hydrodynamic stability and limited laser intensities reduce the excitation of detrimental laser-plasma instabilities, enabling greater areal density accumulation. Here we report an experimental investigation of SAI using a series of warm D 2 implosions. By timing the augmenting shock to arrive at the implosion center immediately prior to peak compression, the areal density and hot-spot pressure increase by 50% and 112%, respectively, relative to unoptimized designs. Ignition-scale simulations reproduce the observed timing dependence and demonstrate the potential of SAI for inertial fusion energy.

Direct drive↗
NASA NTRS1998

Effect of Measured Welding Residual Stresses on Crack Growth

Welding residual stresses in thin plate A516-70 steel and 2219-T87 aluminum butt weldments were measured by the strain-gage hole drilling and X-ray diffraction methods. The residual stress data were used to construct 3D strain fields which were modeled as thermally induced strains. These 3D strain fields were then analyzed with the WARP31) FEM fracture analysis code in order to predict their effect on fatigue and on fracture. For analyses of fatigue crack advance and subsequent verification testing, fatigue crack growth increments were simulated by successive saw-cuts and incremental loading to generate, as a function of crack length, effects on crack growth of the interaction between residual stresses and load induced stresses. The specimen experimental response was characterized and compared to the WARM linear elastic and elastic-plastic fracture mechanics analysis predictions. To perform the fracture analysis, the plate material's crack tearing resistance was determined by tests of thin plate M(T) specimens. Fracture analyses of these specimen were performed using WARP31D to determine the critical Crack Tip Opening Angle [CTOA] of each material. These critical CTOA values were used to predict crack tearing and fracture in the weldments. To verify the fracture predictions, weldment M(T) specimen were tested in monotonic loading to fracture while characterizing the fracture process.

Hampton, Roy W.↗
DOE OSTI2021

Data from : "Warming promotes loss of subsoil carbon through accelerated degradation of plant-derived organic matter". Blodgett warming experiment

This dataset contains data used for the paper: Warming promotes loss of subsoil carbon through accelerated degradation of plant-derived organic matter. Soil Biology and Biochemistry 156, 108185. doi:10.1016/j.soilbio.2021.108185On April 2018 (after 4.5 years of warming), we collected O-horizon (organic horizon) material and soil core down to 90 cm depth from a whole-soil warming experiment in a mixed-coniferous temperate forest, located at the University of California Blodgett experimental forest in the foothills of the Sierra Nevada, CA USA. The goal was to assess how 4.5 years of +4 °C whole-soil warming affected the quantity and quality of soil organic matter. Cores were collected from 6 experimental plots (three replicated blocks); samples were collected in 10 cm increments from 0 to 90 cm depth.This dataset contains a compressed (.zip) archive of the data used for this manuscript. The dataset includes files in .xlsx format, which can be accessed and processed using MS Excel or R. Carbon and nitrogen concentrations, as well as stable carbon isotope composition ((δ13C) and solvent extractable lipid biomarker (alkanoic acids and alkanes) data are provided as processed data files. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy data are provided as raw output and processed data files.The dataset files "Blodgett_warming_Data" and "Blodgett_warming_raw_data.xlsx" were updated on July 7, 2021. The following updates were made: (1) specification of the units of measurements in the dataset (the unit of measurement was missing in some parameters) and (2) the column name "pulled depth" was changed to "pooled depth" in the updated data files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Compositional stability of peat in ecosystem-scale warming mesocosms

Peatlands historically have acted as a C sink because C-fixation rates exceeded the rate of heterotrophic decomposition. Under future warmer conditions predicted for higher latitudes, however, that balance may shift towards higher rates of heterotrophic respiration leading to the release of previously stored C as CO 2 and CH 4 . The Spruce and Peatlands Response Under Changing Environments (SPRUCE) experiment is designed to test the response of peatlands to climate forcing using a series of warmed enclosures in combination with peat below-ground heating from 0 to +9°C above ambient conditions. This experimental design allowed a test of chemical changes occurring within peatland soils following five years of warming. We analyzed samples in the uppermost 2m of peat using Fourier Transform Infrared Spectroscopy (FT-IR) to quantify the relative abundance of carbohydrate and aromatic compounds in the peat. The peat soils were subjected to deep peat heating (DPH) beginning in June of 2014 followed by whole ecosystem warming (WEW) in August of 2015. We found that the relative amounts of labile and recalcitrant chemical compound groups across the full peat depth interval did not significantly change after five years of exposure to warming. This appears the case even though previous studies have shown that net C losses and loss of bulk peat mass to be instability over that time period. Results suggest that the current store of carbon in peatlands are largely compositionally stable leading to no changes the in the ratio of chemical moieties on the initial four-year timescale of this experiment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

SPRUCE Outflow Chemistry Data for Experimental Plots Beginning in 2016

This data set includes the chemistry of outflow waters in the SPRUCE experiment plots located in the S1 bog of the USDA Forest Service Marcell Experimental Forest (MEF) in northern Minnesota, 40 km north of Grand Rapids. These data are post-treatment data from the warming and elevated carbon dioxide (CO2) treatments associated with the SPRUCE experiment. There are ten experimental plots in SPRUCE: five temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same five temperature treatments at elevated CO2 (+500 ppm). Sample collection and analyses started in March of 2016 and will continue for the duration of the experiment. Samples were analyzed for pH, specific conductivity, anion concentrations (chloride, sulfate), cation concentrations (calcium, potassium, magnesium, sodium, aluminum, iron, manganese, silicon, strontium), nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen, total phosphorus), and total organic carbon (TOC) concentrations. Subsets of the samples have been analyzed for natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O), dissolved carbon dioxide (δ13C-CO2), and dissolved methane (δ13C-CH4), and concentrations of total mercury (Thg), methylmercury (MeHg), ferrous iron (Fe2+), ferric iron (Fe3+), dissolved inorganic carbon (DIC), and dissolved methane (CH4).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dynamic and transient processes in warm dense matter

In this paper, we discuss some of the key challenges in the study of time-dependent processes and non-equilibrium behaviour in warm dense matter. We outline some of the basic physics concepts that have underpinned the definition of warm dense matter as a subject area in its own right and then cover, in a selective, non-comprehensive manner, some of the current challenges, pointing along the way to topics covered by the papers presented in this volume.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Reduction of electron-phonon coupling in warm dense iron

The electron-ion relaxation dynamics in warm dense iron were investigated by time-resolved x-ray absorption near-edge spectroscopy (XANES). A novel analysis, combining ab initio density functional theory (DFT) and two temperature model (TTM) simulations, was developed to calculate the x-ray absorption spectra as a function of delay time. Here we present experimental evidence of changes at the XAS L3 edge of iron that are consistent with the reduction of the electron-phonon coupling under warm dense matter conditions. The experimental results are in agreement with the model that takes both the electron ($T_e$) and the ion temperature ($T_i$) dependence of the thermophysical properties into consideration, while models where either constant electron-phonon coupling factor (G) or only $T_e$- dependent G are used do not agree with the observed relaxation dynamics of iron.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1986

Implicit multigrid algorithms for the three-dimensional flux split Euler equations

The full approximation scheme multigrid method is applied to several implicit flux-split algorithms for solving the three-dimensional Euler equations in a body fitted coordinate system. Each uses a variation of approximate factorization and is implemented in a finite volume formulation. The algorithms are all vectorizable with little or no scalar computations required. The flux vectors are split into upwind components using both the splittings of Steger-Warming and Van Leer. Results comparing pressure distributions with experimental data using both splitting types are shown. The stability and smoothing rate of each of the schemes are examined using a Fourier analysis of the complete system of equations. Results are presented for three-dimensional subsonic, transonic, and supersonic flows which demonstrate substantially improved convergence rates with the multigrid algorithm. The influence of using both a V-cycle and a W-cycle on the convergence is examined. Using the multigrid method on both subsonic and transonic wing calculations, the final lift coefficient is obtained to within 0.1 percent of its final value in a few as 15 cycles for a mesh with over 210,000 points. A spectral radius of 0.89 is achieved for both subsonic and transonic flow over the ONERA M6 wing while a spectral radius of 0.83 is obtained for supersonic flow over an analytically defined forebody. Results compared with experiment for all cases show good agreement.

Anderson, W. K.↗
DOE OSTI2020

Conifers depend on established roots during drought: results from a coupled model of carbon allocation and hydraulics

Trees may survive prolonged droughts by shifting water uptake to reliable water sources, but it is unknown if the dominant mechanism involves activating existing roots or growing new roots during drought, or some combination of the two. To gain mechanistic insights on this unknown, a dynamic root-hydraulic modeling framework was developed that set up a feedback between hydraulic controls over carbon allocation and the role of root growth on soil–plant hydraulics. The new model was tested using a 5 yr drought/heat field experiment on an established pi~non-juniper stand with root access to bedrock groundwater. Owing to the high carbon cost per unit root area, modeled trees initialized without adequate bedrock groundwater access experienced potentially lethal declines in water potential, while all of the experimental trees maintained nonlethal water potentials. Simulated trees were unable to grow roots rapidly enough to mediate the hydraulic stress, particularly during warm droughts. Alternatively, modeled trees initiated with root access to bedrock groundwater matched the hydraulics of the experimental trees by increasing their water uptake from bedrock groundwater when soil layers dried out. Therefore, the modeling framework identified a critical mechanism for drought response that required trees to shift water uptake among existing roots rather than growing new roots.

Mackay, D. Scott↗
DOE OSTI2021

SPRUCE Compositional Stability of Peat in Ecosystem-Scale Warming Mesocosms, 2014 and 2019

This dataset contains measurements of carbohydrate and aromatic compounds in peat samples subjected to various levels of deep peat heating (DPE) and whole ecosystem warming (WEW). Samples were collected in August 2014 and August 2019 at the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. These data serve to identify chemical changes occurring within peatland soils following five years of warming. Samples were analyzed in the uppermost 2m of peat using Fourier Transform Infrared Spectroscopy (FT-IR) to quantify the relative abundance of carbohydrate and aromatic compounds in the peat. The peat soils were subjected to DPH beginning in June of 2014 followed by WEW in August of 2015. This dataset contains one data file in comma-separated values (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma-separated values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗