Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emission rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The SNAP 27 gamma radiation spectrum obtained with a Ge/Li/ detector

The pulse height distribution, obtained experimentally using a Ge(Li) detector, was employed to determine the photon emission rate characteristic of a PuO2 fuel source known as the SNAP 27 heat source. The selfshielding parameters of the photon emitter, the efficiency of the detector and the geometry of the experiment were utilized to determine the unscattered photon emission rate of the source and the unscattered flux spectrum at a certain specified distance from the source. For the scattered part of the flux spectrum a Monte Carlo technique was employed so that the total flux spectrum could be determined at any point in the radiation field. As a result of this work, a technique was developed to obtain the unfolded radiation spectrum of the SNAP 27 heat source.

Taherzadeh, M.↗
NASA NTRS1999

Estimation of Mass-Loss Rates from Emission Line Profiles in the UV Spectra of Cool Stars

The photon-scattering winds of cool, low-gravity stars (K-M giants and supergiants) produce absorption features in the strong chromospheric emission lines. This provides us with an opportunity to assess important parameters of the wind, including flow and turbulent velocities, the optical depth of the wind above the region of photon creation, and the star's mass-loss rate. We have used the Lamers et al. Sobolev with Exact Integration (SEI) radiative transfer code along with simple models of the outer atmospheric structure to compute synthetic line profiles for comparison with the observed line profiles. The SEI code has the advantage of being computationally fast and allows a great number of possible wind models to be examined. We therefore use it here to obtain initial first-order estimates of the wind parameters. More sophisticated, but more time-consuming and resource intensive calculations will be performed at a later date, using the SEI-deduced wind parameters as a starting point. A comparison of the profiles over a range of wind velocity laws, turbulence values, and line opacities allows us to constrain the wind parameters, and to estimate the mass-loss rates. We have applied this analysis technique (using lines of Mg II, 0 I, and Fe II) so far to four stars: the normal K5-giant alpha Tau, the hybrid K-giant gamma Dra, the K5 supergiant lambda Vel, and the M-giant gamma Cru. We present in this paper a description of the technique, including the assumptions which go into its use, an assessment of its robustness, and the results of our analysis.

Carpenter, K. G.↗
NASA NTRS1972

Auroral spectrum between 1200 and 4000 angstroms.

Results of spectroscopic observations of an auroral event made simultaneously by airborne and satellite-borne scanning spectrometers in the wavelength region between 1200 and 4000 A. Photon emission rates of several vibrational bands of the N2, 2nd positive, Vegard-Kaplan, and Lyman-Birge-Hopfield systems, the N I lines at 1200 and 3466 A, and O I lines at 1304, 1356, and 2972 A were recorded. Model calculations of the emission rates of the observed features are found to be in reasonable agreement with the measurements. Electron impact excites the nitrogen band systems, as well as the O I 1356-A line. A spectral feature at 2150 A is tentatively identified as the (1, 0) gamma band of N O.

Sharp, W. E.↗
NASA NTRS1981

Fuel economy and exhaust emissions characteristics of diesel vehicles: Test results of a prototype Fiat 131 NA 2.4 liter automobile

The vehicle was tested on a chassis dynamometer over selected drive cycles and steady-state conditions. Two fuels were used, a U.S. no. 2 diesel and a European diesel fuel. The vehicle was tested with retarded timing and with and without an oxidation catalyst. Particulate emission rates were calculated from dilution tunnel measurements and large volume particulate samples were collected for biological and chemical analysis. It was determined that while the catalyst was generally effective in reducing hydrocarbon and carbon monoxide levels, it was also a factor in increasing particulate emissions. Increased particulate emission rates were particularly evident when the vehicle was operated on the European fuel which has a high sulfur content.

Quayle, S. S.↗
NASA NTRS2011

Enhancements in Deriving Smoke Emission Coefficients from Fire Radiative Power Measurements

Smoke emissions have long been quantified after-the-fact by simple multiplication of burned area, biomass density, fraction of above-ground biomass, and burn efficiency. A new algorithm has been suggested, as described in Ichoku & Kaufman (2005), for use in calculating smoke emissions directly from fire radiative power (FRP) measurements such that the latency and uncertainty associated with the previously listed variables are avoided. Application of this new, simpler and more direct algorithm is automatic, based only on a fire's FRP measurement and a predetermined coefficient of smoke emission for a given location. Attaining accurate coefficients of smoke emission is therefore critical to the success of this algorithm. In the aforementioned paper, an initial effort was made to derive coefficients of smoke emission for different large regions of interest using calculations of smoke emission rates from MODIS FRP and aerosol optical depth (AOD) measurements. Further work had resulted in a first draft of a 1 1 resolution map of these coefficients. This poster will present the work done to refine this algorithm toward the first production of global smoke emission coefficients. Main updates in the algorithm include: 1) inclusion of wind vectors to help refine several parameters, 2) defining new methods for calculating the fire-emitted AOD fractions, and 3) calculating smoke emission rates on a per-pixel basis and aggregating to grid cells instead of doing so later on in the process. In addition to a presentation of the methodology used to derive this product, maps displaying preliminary results as well as an outline of the future application of such a product into specific research opportunities will be shown.

Ellison, Luke↗
NASA NTRS1980

Destruction of N/2D/ by O2 - A major source of 6300 A dayglow emission

The paper discusses the N(2D) + O2 yields NO + O(1D), for k1 reaction, and examines under different geophysical conditions, the effect of this source of 6300 A surface brightness on the dayglow redline. In calculating the 6300 A volume emission rate, a computer code is used which provides the thermal electron density, photoelectron flux, ion concentrations, electron and ion temperatures and odd nitrogen densities required to evaluate the O(1D) sources and sinks. It is found that under most conditions this source is the dominant mechanism responsible for the production of the 6300 A dayglow above 150 km. The volume emission rate of this source in summer is 2.5 times larger than the sum of all other sources at 180 km, and 1.5 times as large in winter. In addition, when the N(2D) source of O(1D) is taken into account, the rate coefficient for quenching of O(1D) by N2 is estimated to be 4 plus or minus 1 x 10 to the -11th cu cm per sec.

Torr, D. G.↗
NASA NTRS1981

Nitric oxide delta band emission in the earth's atmosphere - Comparison of a measurement and a theory

Attention is given to the altitude dependent emission rate in the delta-bands of nitric oxide as measured in the earth's atmosphere at night by a scanning ultraviolet spectrometer. It is noted that the reaction responsible is the two-body association of nitrogen and oxygen atoms. The measurements show a vertical intensity beneath the layer for the delta-band system of 19 R. The horizontal emission rate is found to increase from 70 R at 117 km to 140 R at 150 km. The data are analyzed with a one-dimensional, time-dependent, vertical-transport model of odd nitrogen photochemistry. The calculated and measured intensities agree so long as the quenching of N(2D) by atomic oxygen is near 5 x 10 to the -13 cu cm/sec.

Rusch, D. W.↗
NASA NTRS1973

Satellite ultraviolet measurements of nitric oxide fluorescence with a diffusive transport model.

Twilight measurements of fluorescence in the (1, 0) gamma band of nitric oxide were made from June 1967 to January 1969 by an ultraviolet scanning spectrometer on board the polar orbiting satellite Ogo 4. Nitric oxide vertical column emission rates were measured between solar zenith angles of 93 and 98 deg. Seasonal and latitudinal variations were found to be less than a factor of 1.3, the scatter and uncertainty in the data prohibiting more precise determinations from being made. Time independent chemical diffusion models for the vertical distribution of nitric oxide agree well with profiles measured from sounding rockets. The column emission rates calculated from the theoretical models are larger than the satellite measurements by a factor of 3.

Rusch, D. W.↗
NASA NTRS1982

Two-dimensional inversion technique for satellite airglow data

A technique is described which inverts satellite airglow data producing volume emission rates as functions of altitude and position. The inversion is applied to data obtained when the spacecraft spins in the orbital plane. The altitude and height resolutions are constrained by the geometry chosen to simplify the inversion. The limitations of the method and its implementation on data from the Visual Airglow Experiment onboard the Atmosphere Explorer satellite are discussed. Sample maps of brightness and volume emission rates are shown.

Fesen, C. G.↗
NASA NTRS1972

The equatorial airglow and the ionospheric geomagnetic anomaly

OGO D observations of OI (6300A) emissions reveal a global pattern in the equatorial airglow undetected from the ground-based observations. The post sunset emission rate of OI is generally asymmetrical with respect to the geomagnetic equator and shows no apparent correlation with the ultraviolet airglow (OI 1304 and 1356A) and F region electron density measured simultaneously from the same spacecraft. Both the ultraviolet airglow and the ion density measured in the altitude region of 450 km follow similar latitudinal variations and exhibit properties of the equatorial ionospheric anomaly. The asymmetry in OI emission can be attributed to the asymmetry in the height of the F 2 maximum inferred from the height of the maximum emission. From correlative studies of the airglow and the ionospheric measurements, the mechanisms for the ultraviolet and the 6300A emission are discussed in terms of the processes involving radiative and dissociative recombinations. A relationship between molecular oxygen density and the integrated OI emission rate is derived and the feasibility of using this relationship for estimating O2 density is discussed.

Chandra, S.↗
NASA NTRS1990

Emission of nitric oxide (NO) from tropical forest soils and exchange of NO between the forest canopy and atmospheric boundary layers

Emissions of NO from soils in the Amazon rain forest were measured at 66 locations using an enclosure technique, and continuous vertical profiles of NO and O3 were measured between the ground and 41-m altitude. Fluxes of NO averaged 8.9 (+ or - 1.5) x 10 to the 9th molecules/sq cm per sec from the dominant (yellow clay) soils of the region, with larger fluxes observed from adjacent white sand soils. Fluxes from clay soils were lower by more than a factor of 5 than fluxes observed during the dry season at a nearby site. Low soil emission rates were reflected in lower concentrations of NO at the top of the forest canopy in the wet season, only 30-50 parts per trillion by volume during the daytime. The measured fluxes are consistent with chemical mass balances for NO within the forest canopy, calculated from the NO and O3 profiles taken at night, and with observations of NO between 150 and 5000 m altitude. Measurements of NO emission rates from soil plots fertilized using NaNO3, NH4Cl, or sucrose indicated that a reductive pathway (denitrification) may have been primarily responsible for production of the NO released by both clay and sand soils.

Bakwin, Peter S.↗
DOE OSTI2024

Methane Integrated Monitoring and Measurement System Design

Methane (CH 4 ), an abundant greenhouse gas, is the second largest contributor to global warming after carbon dioxide (CO 2 ). In comparison to CO 2 , CH 4 has a larger warming effect over a much shorter lifetime. While technologies to radically reduce global carbon dioxide emissions are materializing, rapid reductions in methane emissions are needed to limit near-term warming. Methane is primarily emitted as a byproduct from agricultural activities and energy extraction/utilization and is currently monitored via bottom-up (i.e., activity level) or top-down (via airborne or satellite retrievals) approaches. However, significant methane leaks remain undetected, and emission rates are challenging to characterize with current monitoring frameworks. In this report, we study methane leaks from oil and gas infrastructure using a tiered monitoring approach that combines bottom-up and top-down approaches in an integrated framework. We describe the individual advantages of bottom-up and top-down sensors in both stationary and mobile settings before characterizing how a fully integrated framework can improve predictions and uncertainties of potential leak locations and their emission rates. Further, we study the impact of different atmospheric (wind) conditions on integrated methane monitoring and develop a probabilistic approach to optimal sensor placement, thereby shortening detection times and improving monitoring capabilities. Last, we discuss how biogenic flux modeling can be used to improve assessment of background methane concentrations needed to fully assess the sensitivity of a tiered monitoring system.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

The excitation of O2 in auroras

Newly measured electron impact cross sections for excitation of the a 1 Delta g and b 1 Sigma g+ electronic states of O2 were employed to predict the absolute volume emission rates from these states under auroral conditions. A secondary electron electron flux typical of an IBC II nighttime aurora was used and the most important quenching processes were included in the calculations. The new excitation cross sections for the a 1 Delta g and b 1 Sigma g+ states are more than an order of magnitude larger than previous estimates, and lead to correspondingly greater intensities in the atmospheric and IR-atmospheric band systems. The calculated intensity ratios of the volume emission rates of 7621 A and 1.27 microns to that for 3914 A are smaller than obtained from aircraft observations and recent rocket experiments.

Cartwright, D. C.↗
NASA NTRS1972

The excitation of O2 in auroras.

Newly measured electron impact cross sections for excitation of the a super 1 Delta sub g and b super 1 Sigma (plus) sub g electronic states of O2 have been employed to predict the absolute volume emission rates from these states under auroral conditions. A secondary electron flux typical of an IBC II nighttime aurora was used, and the most important quenching processes were included in the calculations. The new excitation cross sections for the a super 1 Delta sub g and b super 1 Sigma (plus) sub g states are more than an order of magnitude larger than previous estimates and lead to correspondingly greater intensities in the atmospheric and IR atmospheric band systems. The calculated intensity ratios of the volume emission rates of 7621 A and 1.27 micron to that for 3914 A are smaller than those obtained from aircraft observations and recent rocket experiments.

Cartwright, D. C.↗
NASA NTRS1984

Auroral photometry from the atmosphere Explorer satellite

Attention is given to the ability of remote sensing from space to yield quantitative auroral and ionospheric parametrers, in view of the auroral measurements made during two passes of the Explorer C satellite over the Poker Flat Optical Observatory and the Chatanika Radar Facility. The emission rate of the N2(+) 4278 A band computed from intensity measurements of energetic auroral electrons has tracked the same spetral feature that was measured remotely from the satellite over two decades of intensity, providing a stringent test for the measurement of atmospheric scattering effects. It also verifies the absolute intensity with respect to ground-based photometric measurements. In situ satellite measurments of ion densities and ground based electron density profile radar measurements provide a consistent picture of the ionospheric response to auroral input, while also predicting the observed optical emission rate.

Rees, M. H.↗
NASA NTRS1976

Studies of molecular nitrogen bands from airborne auroral spectroscopy

Absolute auroral emission rates of several bands of the 1 PG (first positive), 2 PG, and Vegard-Kaplan systems of N2 and of the 1 NG (first negative) system of N2(+) were obtained from simultaneous spectral scans of two Ebert spectrophotometers mounted on board the NASA CV 990 aircraft. Analysis of these bands emitted during a 2-min auroral event leads to some conclusions regarding the excitation mechanisms of the C(3)Pi, B(3)Pi, and A(3)Sigma levels: the v' = 0 to v' = 3 levels of the C(3)Pi electronic state are populated by electron impact; the cross sections predict absolute emission rates that are in good agreement with the observations. Cross sections for excitation of the v' = 4 to v' = 8 levels, derived from laboratory measurement of the optical excitation functions, predict well the 1 PG bands observed in the auroral event.

Rees, M. H.↗
DOE OSTI2021

Characterization of Two Extraordinary AmLi Neutron Sources

Two legacy AmLi sources, MRC-101 and MRC-103, are routinely used for neutron detector characterization and testing campaigns that Pacific Northwest National Laboratory manages for the Defense Threat Reduction Agency within the U.S. Department of Defense. However, applicability of source measurement data has been substantially limited due to the lack of original manufacturer documentation and cross comparison to other sources. This paper summarizes results of the measurement campaign conducted to better quantify source radionuclide content, neutron energy spectrum and emission rate of the AmLi sources. The source characterization study consisted of three major consecutive measurement exercises. First, gamma spectrometry measurements using a high purity germanium detector were used to estimate the radionuclide content and potential impurities of the AmLi sources. Then neutron spectral measurements were taken to determine the unique neutron energy distribution. Finally, assessments of the total neutron yields of the sources were made with measurements in a neutron well counter. The neutron detection efficiency for these measurements was determined via detailed Monte Carlo modeling based on the neutron energy distribution measured with the rotating neutron spectrometer. The most exciting and unexpected finding of the study was a significant contamination of the source material with beryllium, contributing up to 17% to the total neutron emission rate and correspondingly changing the neutron energy spectrum. Also, the obtained lithium-only portion of the measured energy distribution of the sources was compared against several AmLi spectra previously reported by different researchers.

AWCC, AmLi, beryllium contamination, neutron spect↗
DOE OSTI2023

Emissions minimization on road networks via Generic Second Order Models

In this paper we consider the problem of estimating emissions due to vehicular traffic on complex networks, and minimizing their effect by regulating traffic at junctions. For the traffic evolution, we consider a Generic Second Order Model, which encompasses the majority of two-equations (i.e., second-order) models available in the literature, and extend it to road networks with merge and diverge junctions. The dynamics on the whole network is determined by selecting a solution to the Riemann Problems at junctions, i.e., the Cauchy problems with constant initial data on each incident road. The latter are solved by assuming the maximization of the flow and assigning a traffic distribution coefficient for outgoing roads of diverges, and a priority rule for incoming roads of merges. A general emission model is considered and its parameters are tuned to the $ {\mathrm{NO_{x}}} $ emission rate. The minimization of emissions is then formulated in terms of the traffic distribution and priority parameters, taking into account travel times. A comparison is provided between roundabouts with optimized parameters and traffic lights, which correspond to time-varying traffic priorities. Our approach can be adapted to manage traffic in complex networks in order to reduce emissions while keeping travel time at acceptable levels.

33 ADVANCED PROPULSION SYSTEMS↗